[CORD-2809] Synchronizer OLTDevice in VOLTHA
Change-Id: Ie4f2e10efd035e3fcb6066e5f7bd859179fa2fea
diff --git a/samples/README.md b/samples/README.md
new file mode 100644
index 0000000..da8db0e
--- /dev/null
+++ b/samples/README.md
@@ -0,0 +1,4 @@
+# Setup the vOLT Service to work with VOLTHA
+
+The TOSCA recipes in this directory are intended to support development,
+but they can be used as a starting point to configure a real deployment.
\ No newline at end of file
diff --git a/samples/olt_device.yaml b/samples/olt_device.yaml
new file mode 100644
index 0000000..e5e898c
--- /dev/null
+++ b/samples/olt_device.yaml
@@ -0,0 +1,41 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @olt_device.yaml http://192.168.99.100:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/oltdevice.yaml
+ - custom_types/voltservice.yaml
+description: Create a simulated OLT Device in VOLTHA
+topology_template:
+ node_templates:
+
+ service#volt:
+ type: tosca.nodes.VOLTService
+ properties:
+ name: volt
+ must-exist: true
+
+ device#olt:
+ type: tosca.nodes.OLTDevice
+ properties:
+ name: test_olt
+ device_type: simulated_olt
+ host: 172.17.0.1
+ port: 50060
+ requirements:
+ - volt_service:
+ node: service#volt
+ relationship: tosca.relationships.BelongsToOne
diff --git a/samples/volt_service.yaml b/samples/volt_service.yaml
new file mode 100644
index 0000000..e0a3b93
--- /dev/null
+++ b/samples/volt_service.yaml
@@ -0,0 +1,31 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @volt_service.yaml http://192.168.99.100:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/voltservice.yaml
+description: Updates the existing vOLT service with deployment specific data
+topology_template:
+ node_templates:
+ service#volt:
+ type: tosca.nodes.VOLTService
+ properties:
+ name: volt
+ must-exist: true
+ voltha_url: 10.128.22.3:8882
+ p_onos_url: 192.168.99.100:31181
+ p_onos_user: karaf
+ p_onos_pass: karaf