/*
 * Copyright 2021-present Open Networking Foundation
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package org.opencord.olt.impl;

import com.google.common.collect.ImmutableMap;
import org.onlab.packet.EthType;
import org.onlab.packet.IPv4;
import org.onlab.packet.IPv6;
import org.onlab.packet.MacAddress;
import org.onlab.packet.TpPort;
import org.onlab.packet.VlanId;
import org.onlab.util.KryoNamespace;
import org.onlab.util.Tools;
import org.onosproject.cfg.ComponentConfigService;
import org.onosproject.core.ApplicationId;
import org.onosproject.core.CoreService;
import org.onosproject.net.AnnotationKeys;
import org.onosproject.net.Annotations;
import org.onosproject.net.ConnectPoint;
import org.onosproject.net.DefaultAnnotations;
import org.onosproject.net.DefaultPort;
import org.onosproject.net.Device;
import org.onosproject.net.DeviceId;
import org.onosproject.net.Host;
import org.onosproject.net.Port;
import org.onosproject.net.PortNumber;
import org.onosproject.net.device.DeviceService;
import org.onosproject.net.flow.DefaultTrafficSelector;
import org.onosproject.net.flow.DefaultTrafficTreatment;
import org.onosproject.net.flow.FlowRule;
import org.onosproject.net.flow.FlowRuleEvent;
import org.onosproject.net.flow.FlowRuleListener;
import org.onosproject.net.flow.FlowRuleService;
import org.onosproject.net.flow.TrafficSelector;
import org.onosproject.net.flow.TrafficTreatment;
import org.onosproject.net.flow.criteria.Criteria;
import org.onosproject.net.flow.criteria.Criterion;
import org.onosproject.net.flow.criteria.VlanIdCriterion;
import org.onosproject.net.flow.instructions.L2ModificationInstruction;
import org.onosproject.net.flowobjective.DefaultFilteringObjective;
import org.onosproject.net.flowobjective.DefaultForwardingObjective;
import org.onosproject.net.flowobjective.FilteringObjective;
import org.onosproject.net.flowobjective.FlowObjectiveService;
import org.onosproject.net.flowobjective.ForwardingObjective;
import org.onosproject.net.flowobjective.Objective;
import org.onosproject.net.flowobjective.ObjectiveContext;
import org.onosproject.net.flowobjective.ObjectiveError;
import org.onosproject.net.host.HostService;
import org.onosproject.net.meter.MeterId;
import org.onosproject.store.serializers.KryoNamespaces;
import org.onosproject.store.service.Serializer;
import org.onosproject.store.service.StorageService;
import org.opencord.olt.impl.fttb.FttbUtils;
import org.opencord.sadis.BandwidthProfileInformation;
import org.opencord.sadis.BaseInformationService;
import org.opencord.sadis.SadisService;
import org.opencord.sadis.SubscriberAndDeviceInformation;
import org.opencord.sadis.UniTagInformation;
import org.osgi.service.component.ComponentContext;
import org.osgi.service.component.annotations.Activate;
import org.osgi.service.component.annotations.Component;
import org.osgi.service.component.annotations.Deactivate;
import org.osgi.service.component.annotations.Modified;
import org.osgi.service.component.annotations.Reference;
import org.osgi.service.component.annotations.ReferenceCardinality;
import org.osgi.service.component.annotations.ReferencePolicy;
import org.slf4j.Logger;
import org.slf4j.LoggerFactory;

import java.util.ArrayList;
import java.util.Dictionary;
import java.util.HashMap;
import java.util.HashSet;
import java.util.Iterator;
import java.util.List;
import java.util.Map;
import java.util.Optional;
import java.util.Properties;
import java.util.Set;
import java.util.concurrent.atomic.AtomicBoolean;
import java.util.concurrent.locks.Lock;
import java.util.concurrent.locks.ReentrantReadWriteLock;

import static com.google.common.base.Strings.isNullOrEmpty;
import static org.onlab.util.Tools.get;
import static org.opencord.olt.impl.OltUtils.completeFlowOpToString;
import static org.opencord.olt.impl.OltUtils.flowOpToString;
import static org.opencord.olt.impl.OltUtils.getPortName;
import static org.opencord.olt.impl.OltUtils.portWithName;
import static org.opencord.olt.impl.OsgiPropertyConstants.DEFAULT_TP_ID;
import static org.opencord.olt.impl.OsgiPropertyConstants.DEFAULT_TP_ID_DEFAULT;
import static org.opencord.olt.impl.OsgiPropertyConstants.DOWNSTREAM_OLT;
import static org.opencord.olt.impl.OsgiPropertyConstants.DOWNSTREAM_ONU;
import static org.opencord.olt.impl.OsgiPropertyConstants.ENABLE_DHCP_ON_NNI;
import static org.opencord.olt.impl.OsgiPropertyConstants.ENABLE_DHCP_ON_NNI_DEFAULT;
import static org.opencord.olt.impl.OsgiPropertyConstants.ENABLE_DHCP_V4;
import static org.opencord.olt.impl.OsgiPropertyConstants.ENABLE_DHCP_V4_DEFAULT;
import static org.opencord.olt.impl.OsgiPropertyConstants.ENABLE_DHCP_V6;
import static org.opencord.olt.impl.OsgiPropertyConstants.ENABLE_DHCP_V6_DEFAULT;
import static org.opencord.olt.impl.OsgiPropertyConstants.ENABLE_EAPOL;
import static org.opencord.olt.impl.OsgiPropertyConstants.ENABLE_EAPOL_DEFAULT;
import static org.opencord.olt.impl.OsgiPropertyConstants.ENABLE_IGMP_ON_NNI;
import static org.opencord.olt.impl.OsgiPropertyConstants.ENABLE_IGMP_ON_NNI_DEFAULT;
import static org.opencord.olt.impl.OsgiPropertyConstants.ENABLE_PPPOE_ON_NNI;
import static org.opencord.olt.impl.OsgiPropertyConstants.ENABLE_PPPOE_ON_NNI_DEFAULT;
import static org.opencord.olt.impl.OsgiPropertyConstants.ENABLE_PPPOE;
import static org.opencord.olt.impl.OsgiPropertyConstants.ENABLE_PPPOE_DEFAULT;
import static org.opencord.olt.impl.fttb.FttbUtils.FTTB_FLOW_DIRECTION;
import static org.opencord.olt.impl.fttb.FttbUtils.FTTB_FLOW_DOWNSTREAM;
import static org.opencord.olt.impl.fttb.FttbUtils.FTTB_FLOW_UPSTREAM;
import static org.opencord.olt.impl.fttb.FttbUtils.FTTB_SERVICE_DPU_ANCP_TRAFFIC;
import static org.opencord.olt.impl.fttb.FttbUtils.FTTB_SERVICE_DPU_MGMT_TRAFFIC;
import static org.opencord.olt.impl.fttb.FttbUtils.FTTB_SERVICE_NAME;
import static org.opencord.olt.impl.OsgiPropertyConstants.UPSTREAM_OLT;
import static org.opencord.olt.impl.OsgiPropertyConstants.UPSTREAM_ONU;
import static org.opencord.olt.impl.OsgiPropertyConstants.WAIT_FOR_REMOVAL;
import static org.opencord.olt.impl.OsgiPropertyConstants.WAIT_FOR_REMOVAL_DEFAULT;
import static org.opencord.olt.impl.fttb.FttbUtils.FTTB_SERVICE_SUBSCRIBER_TRAFFIC;

@Component(immediate = true, property = {
        ENABLE_DHCP_ON_NNI + ":Boolean=" + ENABLE_DHCP_ON_NNI_DEFAULT,
        ENABLE_DHCP_V4 + ":Boolean=" + ENABLE_DHCP_V4_DEFAULT,
        ENABLE_DHCP_V6 + ":Boolean=" + ENABLE_DHCP_V6_DEFAULT,
        ENABLE_IGMP_ON_NNI + ":Boolean=" + ENABLE_IGMP_ON_NNI_DEFAULT,
        ENABLE_EAPOL + ":Boolean=" + ENABLE_EAPOL_DEFAULT,
        ENABLE_PPPOE_ON_NNI + ":Boolean=" + ENABLE_PPPOE_ON_NNI_DEFAULT,
        ENABLE_PPPOE + ":Boolean=" + ENABLE_PPPOE_DEFAULT,
        DEFAULT_TP_ID + ":Integer=" + DEFAULT_TP_ID_DEFAULT,
        // FIXME remove this option as potentially dangerous in production
        WAIT_FOR_REMOVAL + ":Boolean=" + WAIT_FOR_REMOVAL_DEFAULT
})
public class OltFlowService implements OltFlowServiceInterface {

    @Reference(cardinality = ReferenceCardinality.MANDATORY)
    protected CoreService coreService;

    @Reference(cardinality = ReferenceCardinality.MANDATORY)
    protected ComponentConfigService cfgService;

    @Reference(cardinality = ReferenceCardinality.MANDATORY)
    protected FlowObjectiveService flowObjectiveService;

    @Reference(cardinality = ReferenceCardinality.OPTIONAL,
            bind = "bindSadisService",
            unbind = "unbindSadisService",
            policy = ReferencePolicy.DYNAMIC)
    protected volatile SadisService sadisService;

    @Reference(cardinality = ReferenceCardinality.MANDATORY)
    protected OltMeterServiceInterface oltMeterService;

    @Reference(cardinality = ReferenceCardinality.MANDATORY)
    protected OltDeviceServiceInterface oltDeviceService;

    @Reference(cardinality = ReferenceCardinality.MANDATORY)
    protected FlowRuleService flowRuleService;

    @Reference(cardinality = ReferenceCardinality.MANDATORY)
    protected HostService hostService;

    @Reference(cardinality = ReferenceCardinality.MANDATORY)
    protected DeviceService deviceService;

    @Reference(cardinality = ReferenceCardinality.MANDATORY)
    protected StorageService storageService;

    protected BaseInformationService<SubscriberAndDeviceInformation> subsService;
    protected BaseInformationService<BandwidthProfileInformation> bpService;

    private static final String APP_NAME = "org.opencord.olt";
    protected ApplicationId appId;
    private static final Integer MAX_PRIORITY = 10000;
    private static final Integer MIN_PRIORITY = 1000;
    public static final short EAPOL_DEFAULT_VLAN = 4091;
    private static final int NONE_TP_ID = -1;
    private static final String V4 = "V4";
    private static final String V6 = "V6";
    private final Logger log = LoggerFactory.getLogger(getClass());

    protected UniTagInformation defaultEapolUniTag = new UniTagInformation.Builder()
            .setServiceName("defaultEapol").build();
    protected UniTagInformation nniUniTag = new UniTagInformation.Builder()
            .setServiceName("nni")
            .setTechnologyProfileId(NONE_TP_ID)
            .setPonCTag(VlanId.NONE)
            .setUniTagMatch(VlanId.ANY)
            .setUsPonCTagPriority(-1)
            .build();

    /**
     * Connect Point status map.
     * Used to keep track of which cp has flows that needs to be removed when the status changes.
     */
    protected Map<ServiceKey, OltPortStatus> cpStatus;
    private final ReentrantReadWriteLock cpStatusLock = new ReentrantReadWriteLock();
    private final Lock cpStatusWriteLock = cpStatusLock.writeLock();
    private final Lock cpStatusReadLock = cpStatusLock.readLock();

    /**
     * This map contains the subscriber that have been provisioned by the operator.
     * They may or may not have flows, depending on the port status.
     * The map is used to define whether flows need to be provisioned when a port comes up.
     */
    protected Map<ServiceKey, Boolean> provisionedSubscribers;
    private final ReentrantReadWriteLock provisionedSubscribersLock = new ReentrantReadWriteLock();
    private final Lock provisionedSubscribersWriteLock = provisionedSubscribersLock.writeLock();
    private final Lock provisionedSubscribersReadLock = provisionedSubscribersLock.readLock();

    /**
     * Create DHCP trap flow on NNI port(s).
     */
    protected boolean enableDhcpOnNni = ENABLE_DHCP_ON_NNI_DEFAULT;

    /**
     * Enable flows for DHCP v4 if dhcp is required in sadis config.
     **/
    protected boolean enableDhcpV4 = ENABLE_DHCP_V4_DEFAULT;

    /**
     * Enable flows for DHCP v6 if dhcp is required in sadis config.
     **/
    protected boolean enableDhcpV6 = ENABLE_DHCP_V6_DEFAULT;

    /**
     * Create IGMP trap flow on NNI port(s).
     **/
    protected boolean enableIgmpOnNni = ENABLE_IGMP_ON_NNI_DEFAULT;

    /**
     * Send EAPOL authentication trap flows before subscriber provisioning.
     **/
    protected boolean enableEapol = ENABLE_EAPOL_DEFAULT;

    /**
     * Send PPPoED authentication trap flows before subscriber provisioning.
     **/
    protected boolean enablePppoeOnNni = ENABLE_PPPOE_ON_NNI_DEFAULT;

    /**
     * Enable flows for PPPoE if it is required in sadis config.
     **/
    protected boolean enablePppoe = ENABLE_PPPOE_DEFAULT;

    /**
     * Default technology profile id that is used for authentication trap flows.
     **/
    protected int defaultTechProfileId = DEFAULT_TP_ID_DEFAULT;

    protected boolean waitForRemoval = WAIT_FOR_REMOVAL_DEFAULT;

    public enum FlowOperation {
        ADD,
        REMOVE;


        @Override
        public String toString() {
            return super.toString().toLowerCase();
        }
    }

    public enum FlowDirection {
        UPSTREAM,
        DOWNSTREAM,
    }

    public enum OltFlowsStatus {
        NONE,
        PENDING_ADD,
        ADDED,
        PENDING_REMOVE,
        REMOVED,
        ERROR
    }

    protected InternalFlowListener internalFlowListener;

    @Activate
    public void activate(ComponentContext context) {
        cfgService.registerProperties(getClass());
        appId = coreService.registerApplication(APP_NAME);
        internalFlowListener = new InternalFlowListener();

        modified(context);

        KryoNamespace serializer = KryoNamespace.newBuilder()
                .register(KryoNamespaces.API)
                .register(OltFlowsStatus.class)
                .register(FlowDirection.class)
                .register(OltPortStatus.class)
                .register(OltFlowsStatus.class)
                .register(AccessDevicePort.class)
                .register(new ServiceKeySerializer(), ServiceKey.class)
                .register(UniTagInformation.class)
                .build();

        cpStatus = storageService.<ServiceKey, OltPortStatus>consistentMapBuilder()
                .withName("volt-cp-status")
                .withApplicationId(appId)
                .withSerializer(Serializer.using(serializer))
                .build().asJavaMap();

        provisionedSubscribers = storageService.<ServiceKey, Boolean>consistentMapBuilder()
                .withName("volt-provisioned-subscriber")
                .withApplicationId(appId)
                .withSerializer(Serializer.using(serializer))
                .build().asJavaMap();

        flowRuleService.addListener(internalFlowListener);

        log.info("Started");
    }

    @Deactivate
    public void deactivate(ComponentContext context) {
        cfgService.unregisterProperties(getClass(), false);
        flowRuleService.removeListener(internalFlowListener);
        log.info("Stopped");
    }

    @Modified
    public void modified(ComponentContext context) {

        Dictionary<?, ?> properties = context != null ? context.getProperties() : new Properties();

        Boolean o = Tools.isPropertyEnabled(properties, ENABLE_DHCP_ON_NNI);
        if (o != null) {
            enableDhcpOnNni = o;
        }

        Boolean v4 = Tools.isPropertyEnabled(properties, ENABLE_DHCP_V4);
        if (v4 != null) {
            enableDhcpV4 = v4;
        }

        Boolean v6 = Tools.isPropertyEnabled(properties, ENABLE_DHCP_V6);
        if (v6 != null) {
            enableDhcpV6 = v6;
        }

        Boolean p = Tools.isPropertyEnabled(properties, ENABLE_IGMP_ON_NNI);
        if (p != null) {
            enableIgmpOnNni = p;
        }

        Boolean eap = Tools.isPropertyEnabled(properties, ENABLE_EAPOL);
        if (eap != null) {
            enableEapol = eap;
        }

        Boolean pppoeInNni = Tools.isPropertyEnabled(properties, ENABLE_PPPOE_ON_NNI);
        if (pppoeInNni != null) {
            enablePppoeOnNni = pppoeInNni;
        }

        Boolean pppoe = Tools.isPropertyEnabled(properties, ENABLE_PPPOE);
        if (pppoe != null) {
            enablePppoe = pppoe;
        }

        Boolean wait = Tools.isPropertyEnabled(properties, WAIT_FOR_REMOVAL);
        if (wait != null) {
            waitForRemoval = wait;
        }

        String tpId = get(properties, DEFAULT_TP_ID);
        defaultTechProfileId = isNullOrEmpty(tpId) ? DEFAULT_TP_ID_DEFAULT : Integer.parseInt(tpId.trim());

        log.info("Modified. Values = enableDhcpOnNni: {}, enableDhcpV4: {}, " + "enableDhcpV6:{}, " +
                        "enableIgmpOnNni:{}, " + "enableEapol:{}, enablePppoeOnNni: {}, enablePppoe:{}, " +
                        "defaultTechProfileId:{}," + "waitForRemoval:{}",
                enableDhcpOnNni, enableDhcpV4, enableDhcpV6, enableIgmpOnNni, enableEapol,
                enablePppoeOnNni, enablePppoe, defaultTechProfileId, waitForRemoval);
    }

    @Override
    public ImmutableMap<ServiceKey, OltPortStatus> getConnectPointStatus() {
        try {
            cpStatusReadLock.lock();
            return ImmutableMap.copyOf(cpStatus);
        } finally {
            cpStatusReadLock.unlock();
        }
    }

    @Override
    public ImmutableMap<ServiceKey, UniTagInformation> getProgrammedSubscribers() {
        // NOTE we might want to remove this conversion and directly use cpStatus as it contains
        // all the required information about subscribers
        Map<ServiceKey, UniTagInformation> subscribers =
                new HashMap<>();
        try {
            cpStatusReadLock.lock();

            cpStatus.forEach((sk, status) -> {
                if (
                    // not NNI Port
                        !oltDeviceService.isNniPort(deviceService.getDevice(sk.getPort().connectPoint().deviceId()),
                                sk.getPort().connectPoint().port()) &&
                                // not EAPOL flow
                                !sk.getService().equals(defaultEapolUniTag) &&
                                !status.subscriberFlowsStatus.equals(OltFlowsStatus.PENDING_REMOVE)
                                && !status.subscriberFlowsStatus.equals(OltFlowsStatus.REMOVED)

                ) {
                    subscribers.put(sk, sk.getService());
                }
            });

            return ImmutableMap.copyOf(subscribers);
        } finally {
            cpStatusReadLock.unlock();
        }
    }

    @Override
    public Map<ServiceKey, Boolean> getRequestedSubscribers() {
        try {
            provisionedSubscribersReadLock.lock();
            return ImmutableMap.copyOf(provisionedSubscribers);
        } finally {
            provisionedSubscribersReadLock.unlock();
        }
    }

    @Override
    public void handleNniFlows(Device device, Port port, FlowOperation action) {

        // always handle the LLDP flow
        log.debug("{} LLDP trap flow on NNI {} for device {}", flowOpToString(action), portWithName(port), device.id());
        processLldpFilteringObjective(device.id(), port, action);

        if (enableDhcpOnNni) {
            if (enableDhcpV4) {
                log.debug("{} DHCPv4 trap flow on NNI {} for device {}", flowOpToString(action),
                        portWithName(port), device.id());
                processDhcpFilteringObjectives(device.id(), port, action, FlowDirection.DOWNSTREAM,
                        67, 68, EthType.EtherType.IPV4.ethType(), IPv4.PROTOCOL_UDP,
                        null, null, nniUniTag);
            }
            if (enableDhcpV6) {
                log.debug("{} DHCPv6 trap flow on NNI {} for device {}", flowOpToString(action),
                        portWithName(port), device.id());
                processDhcpFilteringObjectives(device.id(), port, action, FlowDirection.DOWNSTREAM,
                        546, 547, EthType.EtherType.IPV6.ethType(), IPv6.PROTOCOL_UDP,
                        null, null, nniUniTag);
            }
        } else {
            log.debug("DHCP is not required on NNI {} for device {}", portWithName(port), device.id());
        }

        if (enableIgmpOnNni) {
            log.debug("{} IGMP flow on NNI {} for device {}", flowOpToString(action), portWithName(port), device.id());
            processIgmpFilteringObjectives(device.id(), port, action, FlowDirection.DOWNSTREAM,
                    null, null, NONE_TP_ID, VlanId.NONE, VlanId.ANY, -1);
        }

        if (enablePppoeOnNni) {
            log.debug("{} PPPoE flow on NNI {} for device {}", flowOpToString(action), port.number(), device.id());
            processPPPoEDFilteringObjectives(device.id(), port, action, FlowDirection.DOWNSTREAM,
                    null, null, NONE_TP_ID, VlanId.NONE, VlanId.ANY, null);
        }
    }

    @Override
    public boolean handleBasicPortFlows(DiscoveredSubscriber sub, String bandwidthProfileId,
                                        String oltBandwidthProfileId) {
        // we only need to something if EAPOL is enabled
        if (!enableEapol) {
            log.debug("Eapol is disabled for {}", portWithName(sub.port));
            return true;
        }

        if (sub.status == DiscoveredSubscriber.Status.ADDED) {
            return addDefaultFlows(sub, bandwidthProfileId, oltBandwidthProfileId);
        } else if (sub.status == DiscoveredSubscriber.Status.REMOVED) {
            return removeDefaultFlows(sub, bandwidthProfileId, oltBandwidthProfileId);
        } else {
            log.error("Unknown Status {} on DiscoveredSubscriber {}", sub.status, sub);
            return false;
        }
    }

    private boolean addDefaultFlows(DiscoveredSubscriber sub, String bandwidthProfileId, String oltBandwidthProfileId) {
        log.debug("Adding default flows for {}, status {}", portWithName(sub.port), sub.status);
        if (!oltMeterService.createMeter(sub.device.id(), bandwidthProfileId)) {
            if (log.isTraceEnabled()) {
                log.trace("waiting on meter for bp {} and sub {}", bandwidthProfileId, sub);
            }
            return false;
        }
        if (hasDefaultEapol(sub.port)) {
            OltPortStatus status = getOltPortStatus(sub.port, defaultEapolUniTag);
            log.debug("Eapol is already present for {} with status {}", portWithName(sub.port), status);
            return true;
        }
        return handleEapolFlow(sub, bandwidthProfileId,
                oltBandwidthProfileId, FlowOperation.ADD, VlanId.vlanId(EAPOL_DEFAULT_VLAN));

    }

    private boolean removeDefaultFlows(DiscoveredSubscriber sub, String bandwidthProfile, String oltBandwidthProfile) {
        // NOTE that we are not checking for meters as they must have been created to install the flow in first place
        return handleEapolFlow(sub, bandwidthProfile, oltBandwidthProfile,
                FlowOperation.REMOVE, VlanId.vlanId(EAPOL_DEFAULT_VLAN));
    }

    @Override
    public boolean handleSubscriberFlows(DiscoveredSubscriber sub, String defaultBandwidthProfile,
                                         String multicastServiceName) {
        // NOTE that we are taking defaultBandwithProfile as a parameter as that can be configured in the Olt component
        if (sub.status == DiscoveredSubscriber.Status.ADDED) {
            return addSubscriberFlows(sub, defaultBandwidthProfile, multicastServiceName);
        } else if (sub.status == DiscoveredSubscriber.Status.REMOVED ||
                sub.status == DiscoveredSubscriber.Status.ADMIN_REMOVED) {
            return removeSubscriberFlows(sub, defaultBandwidthProfile, multicastServiceName);
        } else {
            log.error("don't know how to handle {}", sub);
            return false;
        }
    }

    private boolean addSubscriberFlows(DiscoveredSubscriber sub, String defaultBandwithProfile,
                                       String multicastServiceName) {
        if (log.isTraceEnabled()) {
            log.trace("Provisioning of subscriber on {} started", portWithName(sub.port));
        }
        if (enableEapol) {
            if (hasDefaultEapol(sub.port)) {
                // remove EAPOL flow and throw exception so that we'll retry later
                if (!isDefaultEapolPendingRemoval(sub.port)) {
                    removeDefaultFlows(sub, defaultBandwithProfile, defaultBandwithProfile);
                }

                if (waitForRemoval) {
                    // NOTE wait for removal is a flag only needed to make sure VOLTHA
                    // does not explode with the flows remove/add in the same batch
                    log.debug("Awaiting for default flows removal for {}", portWithName(sub.port));
                    return false;
                } else {
                    log.warn("continuing provisioning on {}", portWithName(sub.port));
                }
            }
        }

        // NOTE createMeters will return if the meters are not installed
        if (!oltMeterService.createMeters(sub.device.id(),
                sub.subscriberAndDeviceInformation, multicastServiceName)) {
            return false;
        }

        // NOTE we need to add the DHCP flow regardless so that the host can be discovered and the MacAddress added
        handleSubscriberDhcpFlows(sub.device.id(), sub.port, FlowOperation.ADD,
                sub.subscriberAndDeviceInformation);

        if (isMacLearningEnabled(sub.subscriberAndDeviceInformation)
                && !isMacAddressAvailable(sub.device.id(), sub.port,
                sub.subscriberAndDeviceInformation)) {
            log.debug("Awaiting for macAddress on {}", portWithName(sub.port));
            return false;
        }

        // NOTE that the EAPOL flows handling is based on the data-plane flows status
        // always process them before
        handleSubscriberEapolFlows(sub, FlowOperation.ADD, sub.subscriberAndDeviceInformation);

        handleSubscriberPppoeFlows(sub.device.id(), sub.port, FlowOperation.ADD, sub.subscriberAndDeviceInformation);

        handleSubscriberDataFlows(sub.device, sub.port, FlowOperation.ADD,
                sub.subscriberAndDeviceInformation, multicastServiceName);

        handleSubscriberIgmpFlows(sub, FlowOperation.ADD);

        log.info("Provisioning of subscriber on {} completed", portWithName(sub.port));
        return true;
    }

    protected boolean removeSubscriberFlows(DiscoveredSubscriber sub, String defaultBandwithProfile,
                                          String multicastServiceName) {

        if (log.isTraceEnabled()) {
            log.trace("Removal of subscriber on {} started",
                    portWithName(sub.port));
        }
        SubscriberAndDeviceInformation si = sub.subscriberAndDeviceInformation;
        //If the port has been removed the device service will return null, while it will be true if it's just disabled
        boolean isPortPresent = deviceService.getPort(new ConnectPoint(sub.device.id(), sub.port.number())) != null;
        if (log.isTraceEnabled()) {
            log.trace("Port {} present: ", portWithName(sub.port), isPortPresent);
        }
        // Always remove the EAPOL flow in case of port disable,remove or subscriber remove.
        if (enableEapol) {
            // remove the tagged eapol
            handleSubscriberEapolFlows(sub, FlowOperation.REMOVE, si);
            log.info("Removal of eapol flow for subscriber on {} completed", portWithName(sub.port));

        }
        // If the port is gone entirely (onu delete) or it's enabled (subscriber remove request) remove all the flows
        // In the case the port is just disabled we remove only the EAPOL flow because the ONU disable only represents
        // the UNI side of the ONU going down, either for RG cable detach or for an administrative decision, but the PON
        // side is still up as nothing changed, so no need to add/remove flows, when and if the UNI comes up
        // we will re-push the EAPOL flow to require the subscriber to auth again.
        // When the subscriber is admin removed from REST or CLI we ignore the port status.
        if (!isPortPresent || sub.port.isEnabled() || sub.status == DiscoveredSubscriber.Status.ADMIN_REMOVED) {

            handleSubscriberDhcpFlows(sub.device.id(), sub.port, FlowOperation.REMOVE, si);

            handleSubscriberPppoeFlows(sub.device.id(), sub.port, FlowOperation.REMOVE,
                    sub.subscriberAndDeviceInformation);

            handleSubscriberDataFlows(sub.device, sub.port, FlowOperation.REMOVE, si, multicastServiceName);

            handleSubscriberIgmpFlows(sub, FlowOperation.REMOVE);


            if (enableEapol) {

                // if any of the services still has flows, return false
                Iterator<UniTagInformation> iter = sub.subscriberAndDeviceInformation.uniTagList().iterator();
                while (iter.hasNext()) {
                    UniTagInformation entry = iter.next();
                    if (areSubscriberFlowsPendingRemoval(sub.port, entry, enableEapol)) {
                        log.info("Subscriber {} still have flows on service {}, postpone default EAPOL installation.",
                                portWithName(sub.port), entry.getServiceName());
                        return false;
                    }
                }

                // once the flows are removed add the default one back
                // (only if the port is ENABLED and still present on the device)
                if (sub.port.isEnabled() && deviceService.getPort(sub.device.id(), sub.port.number()) != null) {

                    // NOTE we remove the subscriber when the port goes down
                    // but in that case we don't need to add default eapol
                    handleEapolFlow(sub, defaultBandwithProfile, defaultBandwithProfile,
                            FlowOperation.ADD, VlanId.vlanId(EAPOL_DEFAULT_VLAN));
                }
            }
            // FIXME check the return status of the flow and return accordingly
            log.info("Removal of subscriber on {} completed", portWithName(sub.port));
            return true;
        }
        return true;
    }

    @Override
    public boolean hasDefaultEapol(Port port) {
        OltPortStatus status = getOltPortStatus(port, defaultEapolUniTag);
        // NOTE we consider ERROR as a present EAPOL flow as ONOS
        // will keep trying to add it
        return status != null && (status.defaultEapolStatus == OltFlowsStatus.ADDED ||
                status.defaultEapolStatus == OltFlowsStatus.PENDING_ADD ||
                status.defaultEapolStatus == OltFlowsStatus.ERROR);
    }

    private OltPortStatus getOltPortStatus(Port port, UniTagInformation uniTagInformation) {
        try {
            cpStatusReadLock.lock();
            ServiceKey sk = new ServiceKey(new AccessDevicePort(port), uniTagInformation);
            OltPortStatus status = cpStatus.get(sk);
            return status;
        } finally {
            cpStatusReadLock.unlock();
        }
    }

    public boolean isDefaultEapolPendingRemoval(Port port) {
        OltPortStatus status = getOltPortStatus(port, defaultEapolUniTag);
        if (log.isTraceEnabled()) {
            log.trace("Status during EAPOL flow check {} for port {} and UniTagInformation {}",
                    status, portWithName(port), defaultEapolUniTag);
        }
        return status != null && status.defaultEapolStatus == OltFlowsStatus.PENDING_REMOVE;
    }

    @Override
    public boolean hasDhcpFlows(Port port, UniTagInformation uti) {
        OltPortStatus status = getOltPortStatus(port, uti);
        if (log.isTraceEnabled()) {
            log.trace("Status during DHCP flow check {} for port {} and service {}",
                    status, portWithName(port), uti.getServiceName());
        }
        return status != null &&
                (status.dhcpStatus == OltFlowsStatus.ADDED ||
                        status.dhcpStatus == OltFlowsStatus.PENDING_ADD);
    }

    @Override
    public boolean hasPppoeFlows(Port port, UniTagInformation uti) {
        OltPortStatus status = getOltPortStatus(port, uti);
        if (log.isTraceEnabled()) {
            log.trace("Status during PPPoE flow check {} for port {} and service {}",
                    status, portWithName(port), uti.getServiceName());
        }
        return status != null &&
                (status.pppoeStatus == OltFlowsStatus.ADDED ||
                        status.pppoeStatus == OltFlowsStatus.PENDING_ADD);
    }

    @Override
    public boolean hasSubscriberFlows(Port port, UniTagInformation uti) {

        OltPortStatus status = getOltPortStatus(port, uti);
        if (log.isTraceEnabled()) {
            log.trace("Status during subscriber flow check {} for port {} and service {}",
                    status, portWithName(port), uti.getServiceName());
        }
        return status != null && (status.subscriberFlowsStatus == OltFlowsStatus.ADDED ||
                status.subscriberFlowsStatus == OltFlowsStatus.PENDING_ADD);
    }

    public boolean areSubscriberFlowsPendingRemoval(Port port, UniTagInformation uti, boolean enableEapol) {
        OltPortStatus status = getOltPortStatus(port, uti);
        if (log.isTraceEnabled()) {
            log.trace("Status during pending_remove flow check {} for port {} and UniTagInformation {}",
                    status, portWithName(port), uti);
        }
        return status != null && (status.subscriberFlowsStatus == OltFlowsStatus.PENDING_REMOVE ||
                (enableEapol && status.subscriberEapolStatus == OltFlowsStatus.PENDING_REMOVE) ||
                (uti.getIsDhcpRequired() && status.dhcpStatus == OltFlowsStatus.PENDING_REMOVE));
    }

    @Override
    public void purgeDeviceFlows(DeviceId deviceId) {
        log.debug("Purging flows on device {}", deviceId);
        flowRuleService.purgeFlowRules(deviceId);

        // removing the status from the cpStatus map
        if (log.isTraceEnabled()) {
            log.trace("Clearing cp status from device {}", deviceId);
        }
        try {
            cpStatusWriteLock.lock();
            Iterator<Map.Entry<ServiceKey, OltPortStatus>> iter = cpStatus.entrySet().iterator();
            while (iter.hasNext()) {
                Map.Entry<ServiceKey, OltPortStatus> entry = iter.next();
                if (entry.getKey().getPort().connectPoint().deviceId().equals(deviceId)) {
                    cpStatus.remove(entry.getKey());
                }
            }
        } finally {
            cpStatusWriteLock.unlock();
        }

        // removing subscribers from the provisioned map
        if (log.isTraceEnabled()) {
            log.trace("Clearing provisioned subscribers from device {}", deviceId);
        }
        try {
            provisionedSubscribersWriteLock.lock();
            Iterator<Map.Entry<ServiceKey, Boolean>> iter = provisionedSubscribers.entrySet().iterator();
            while (iter.hasNext()) {
                Map.Entry<ServiceKey, Boolean> entry = iter.next();
                if (entry.getKey().getPort().connectPoint().deviceId().equals(deviceId)) {
                    provisionedSubscribers.remove(entry.getKey());
                }
            }
        } finally {
            provisionedSubscribersWriteLock.unlock();
        }
        log.debug("Done clearing up device flows and subscribers");
    }

    @Override
    public boolean isSubscriberServiceProvisioned(AccessDevicePort cp) {
        Set<Map.Entry<ServiceKey, Boolean>> subs;
        try {
            provisionedSubscribersReadLock.lock();
            subs = new HashSet<>(provisionedSubscribers.entrySet());
        } finally {
            provisionedSubscribersReadLock.unlock();
        }

        for (Map.Entry<ServiceKey, Boolean> entry : subs) {
            if (entry.getKey().getPort().equals(cp) && entry.getValue()) {
                return true;
            }
        }
        return false;
    }

    @Override
    public boolean isSubscriberServiceProvisioned(ServiceKey sk) {
        try {
            provisionedSubscribersReadLock.lock();
            Boolean provisioned = provisionedSubscribers.get(sk);
            if (provisioned == null || !provisioned) {
                return false;
            }
        } finally {
            provisionedSubscribersReadLock.unlock();
        }
        return true;
    }

    @Override
    public void updateProvisionedSubscriberStatus(ServiceKey sk, Boolean status) {
        try {
            provisionedSubscribersWriteLock.lock();
            provisionedSubscribers.put(sk, status);
        } finally {
            provisionedSubscribersWriteLock.unlock();
        }
    }

    protected boolean handleEapolFlow(DiscoveredSubscriber sub, String bandwidthProfile,
                                    String oltBandwidthProfile, FlowOperation action, VlanId vlanId) {

        // create a subscriberKey for the EAPOL flow
        ServiceKey sk = new ServiceKey(new AccessDevicePort(sub.port), defaultEapolUniTag);
        OltFlowsStatus status = action == FlowOperation.ADD ?
                OltFlowsStatus.PENDING_ADD : OltFlowsStatus.PENDING_REMOVE;
        if (vlanId.id().equals(EAPOL_DEFAULT_VLAN)) {
            updateConnectPointStatus(sk, status, OltFlowsStatus.NONE, OltFlowsStatus.NONE,
                                     OltFlowsStatus.NONE, OltFlowsStatus.NONE);

        } else {
            updateConnectPointStatus(sk, OltFlowsStatus.NONE, status, OltFlowsStatus.NONE,
                                     OltFlowsStatus.NONE, OltFlowsStatus.NONE);
        }

        DefaultFilteringObjective.Builder filterBuilder = DefaultFilteringObjective.builder();
        TrafficTreatment.Builder treatmentBuilder = DefaultTrafficTreatment.builder();

        int techProfileId = getDefaultTechProfileId(sub.port);
        MeterId meterId = oltMeterService.getMeterIdForBandwidthProfile(sub.device.id(), bandwidthProfile);

        // in the delete case the meter should still be there as we remove
        // the meters only if no flows are pointing to them
        if (meterId == null) {
            log.debug("MeterId is null for BandwidthProfile {} on device {}",
                    bandwidthProfile, sub.device.id());
            return false;
        }

        MeterId oltMeterId = oltMeterService.getMeterIdForBandwidthProfile(sub.device.id(), oltBandwidthProfile);
        if (oltMeterId == null) {
            log.debug("MeterId is null for OltBandwidthProfile {} on device {}",
                    oltBandwidthProfile, sub.device.id());
            return false;
        }

        log.info("{} EAPOL flow for {} with vlanId {} and BandwidthProfile {} (meterId {})",
                flowOpToString(action), portWithName(sub.port), vlanId, bandwidthProfile, meterId);

        FilteringObjective.Builder eapolAction;

        if (action == FlowOperation.ADD) {
            eapolAction = filterBuilder.permit();
        } else if (action == FlowOperation.REMOVE) {
            eapolAction = filterBuilder.deny();
        } else {
            log.error("Operation {} not supported", action);
            return false;
        }

        FilteringObjective.Builder baseEapol = eapolAction
                .withKey(Criteria.matchInPort(sub.port.number()))
                .addCondition(Criteria.matchEthType(EthType.EtherType.EAPOL.ethType()));

        // NOTE we only need to add the treatment to install the flow,
        // we can remove it based in the match
        FilteringObjective.Builder eapol;

        // Setting VlanId.NONE as cvlan in the metadata as the packet will be single tagged
        // and cvlan should not be filled.
        TrafficTreatment treatment = treatmentBuilder
                .meter(meterId)
                .writeMetadata(OltFlowServiceUtils.createTechProfValueForWriteMetadata(
                        VlanId.NONE,
                        techProfileId, oltMeterId), 0)
                .setOutput(PortNumber.CONTROLLER)
                .pushVlan()
                .setVlanId(vlanId)
                .build();
        eapol = baseEapol
                .withMeta(treatment);

        FilteringObjective eapolObjective = eapol
                .fromApp(appId)
                .withPriority(MAX_PRIORITY)
                .add(new ObjectiveContext() {
                    @Override
                    public void onSuccess(Objective objective) {
                        log.info("EAPOL flow objective {} for {}",
                                completeFlowOpToString(action), portWithName(sub.port));
                        if (log.isTraceEnabled()) {
                            log.trace("EAPOL flow details for port {}: {}", portWithName(sub.port), objective);
                        }
                    }

                    @Override
                    public void onError(Objective objective, ObjectiveError error) {
                        log.error("Cannot {} eapol flow for {} : {}", action,
                                portWithName(sub.port), error);

                        if (vlanId.id().equals(EAPOL_DEFAULT_VLAN)) {
                            updateConnectPointStatus(sk,
                                                     OltFlowsStatus.ERROR, null, null, null, null);
                        }
                    }
                });

        flowObjectiveService.filter(sub.device.id(), eapolObjective);

        log.info("{} EAPOL filter for {}", completeFlowOpToString(action), portWithName(sub.port));
        return true;
    }

    // FIXME it's confusing that si is not necessarily inside the DiscoveredSubscriber
    protected boolean handleSubscriberEapolFlows(DiscoveredSubscriber sub, FlowOperation action,
                                               SubscriberAndDeviceInformation si) {
        if (!enableEapol) {
            return true;
        }
        // TODO verify we need an EAPOL flow for EACH service
        AtomicBoolean success = new AtomicBoolean(true);
        si.uniTagList().forEach(u -> {
            //Always act on the eapol flow
            log.info("{} EAPOL flows for subscriber {} on {} and service {}",
                    flowOpToString(action), si.id(), portWithName(sub.port), u.getServiceName());
            if (!handleEapolFlow(sub, u.getUpstreamBandwidthProfile(),
                    u.getUpstreamOltBandwidthProfile(),
                    action, u.getPonCTag())) {
                //
                log.error("Failed to {} EAPOL with subscriber tags", action);
                //TODO this sets it for all services, maybe some services succeeded.
                success.set(false);
            }
        });
        return success.get();
    }

    protected void handleSubscriberIgmpFlows(DiscoveredSubscriber sub, FlowOperation action) {
        sub.subscriberAndDeviceInformation.uniTagList().forEach(uti -> {
            if (uti.getIsIgmpRequired()) {
                DeviceId deviceId = sub.device.id();
                // if we reached here a meter already exists
                MeterId meterId = oltMeterService
                        .getMeterIdForBandwidthProfile(deviceId, uti.getUpstreamBandwidthProfile());
                MeterId oltMeterId = oltMeterService
                        .getMeterIdForBandwidthProfile(deviceId, uti.getUpstreamOltBandwidthProfile());

                processIgmpFilteringObjectives(deviceId, sub.port,
                        action, FlowDirection.UPSTREAM, meterId, oltMeterId, uti.getTechnologyProfileId(),
                        uti.getPonCTag(), uti.getUniTagMatch(), uti.getUsPonCTagPriority());
            }
        });
    }

    private boolean checkSadisRunning() {
        if (bpService == null) {
            log.warn("Sadis is not running");
            return false;
        }
        return true;
    }

    private int getDefaultTechProfileId(Port port) {
        if (!checkSadisRunning()) {
            return defaultTechProfileId;
        }
        if (port != null) {
            SubscriberAndDeviceInformation info = subsService.get(getPortName(port));
            if (info != null && info.uniTagList().size() == 1) {
                return info.uniTagList().get(0).getTechnologyProfileId();
            }
        }
        return defaultTechProfileId;
    }

    private void processLldpFilteringObjective(DeviceId deviceId, Port port, FlowOperation action) {
        DefaultFilteringObjective.Builder builder = DefaultFilteringObjective.builder();

        FilteringObjective lldp = (action == FlowOperation.ADD ? builder.permit() : builder.deny())
                .withKey(Criteria.matchInPort(port.number()))
                .addCondition(Criteria.matchEthType(EthType.EtherType.LLDP.ethType()))
                .withMeta(DefaultTrafficTreatment.builder()
                        .setOutput(PortNumber.CONTROLLER).build())
                .fromApp(appId)
                .withPriority(MAX_PRIORITY)
                .add(new ObjectiveContext() {
                    @Override
                    public void onSuccess(Objective objective) {
                        log.info("{} LLDP filter for {}.", completeFlowOpToString(action), portWithName(port));
                    }

                    @Override
                    public void onError(Objective objective, ObjectiveError error) {
                        log.error("Falied to {} LLDP filter on {} because {}", action, portWithName(port),
                                error);
                    }
                });

        flowObjectiveService.filter(deviceId, lldp);
    }

    protected void handleSubscriberDhcpFlows(DeviceId deviceId, Port port,
                                             FlowOperation action,
                                             SubscriberAndDeviceInformation si) {
        si.uniTagList().forEach(uti -> {

            if (!uti.getIsDhcpRequired()) {
                return;
            }

            // if it's an ADD skip if flows are there,
            // if it's a DELETE skip if flows are not there
            boolean hasFlows = hasDhcpFlows(port, uti);
            if (action == FlowOperation.ADD && hasFlows ||
                    action == FlowOperation.REMOVE && !hasFlows) {
                log.debug("Not dealing with DHCP {} on {} as DHCP flow status is {}", action,
                        uti.getServiceName(), hasFlows);
                return;
            }

            log.info("{} DHCP flows for subscriber on {} and service {}",
                    flowOpToString(action), portWithName(port), uti.getServiceName());

            // if we reached here a meter already exists
            MeterId meterId = oltMeterService
                    .getMeterIdForBandwidthProfile(deviceId, uti.getUpstreamBandwidthProfile());
            MeterId oltMeterId = oltMeterService
                    .getMeterIdForBandwidthProfile(deviceId, uti.getUpstreamOltBandwidthProfile());

            if (enableDhcpV4) {
                processDhcpFilteringObjectives(deviceId, port, action, FlowDirection.UPSTREAM, 68, 67,
                        EthType.EtherType.IPV4.ethType(), IPv4.PROTOCOL_UDP, meterId, oltMeterId,
                        uti);
            }
            if (enableDhcpV6) {
                log.error("DHCP V6 not supported for subscribers");
            }
        });
    }

    protected void handleSubscriberPppoeFlows(DeviceId deviceId, Port port,
                                             FlowOperation action,
                                             SubscriberAndDeviceInformation si) {
        si.uniTagList().forEach(uti -> {

            if (!uti.getIsPppoeRequired()) {
                return;
            }

            // if it's an ADD skip if flows are there,
            // if it's a DELETE skip if flows are not there
            boolean hasFlows = hasPppoeFlows(port, uti);
            if (action == FlowOperation.ADD && hasFlows ||
                    action == FlowOperation.REMOVE && !hasFlows) {
                log.debug("Not dealing with PPPoE {} on {} as PPPoE flow status is {}", action,
                        uti.getServiceName(), hasFlows);
                return;
            }

            log.info("{} PPPoE flows for subscriber on {} and service {}",
                    flowOpToString(action), portWithName(port), uti.getServiceName());

            // if we reached here a meter already exists
            MeterId meterId = oltMeterService
                    .getMeterIdForBandwidthProfile(deviceId, uti.getUpstreamBandwidthProfile());
            MeterId oltMeterId = oltMeterService
                    .getMeterIdForBandwidthProfile(deviceId, uti.getUpstreamOltBandwidthProfile());

            if (enablePppoe) {
                processPPPoEDFilteringObjectives(deviceId, port, action, FlowDirection.UPSTREAM, meterId, oltMeterId,
                        uti.getTechnologyProfileId(), uti.getPonCTag(), uti.getUniTagMatch(),
                        (byte) uti.getUsPonCTagPriority());
            }
        });
    }

    // FIXME return boolean, if this fails we need to retry
    protected void handleSubscriberDataFlows(Device device, Port port,
                                             FlowOperation action,
                                             SubscriberAndDeviceInformation si, String multicastServiceName) {

        Optional<Port> nniPort = oltDeviceService.getNniPort(device);
        if (nniPort == null || nniPort.isEmpty()) {
            log.error("Cannot configure DP flows as upstream port is not configured for subscriber {} on {}",
                    si.id(), portWithName(port));
            return;
        }
        si.uniTagList().forEach(uti -> {

            boolean hasFlows = hasSubscriberFlows(port, uti);
            if (action == FlowOperation.ADD && hasFlows ||
                    action == FlowOperation.REMOVE && !hasFlows) {
                log.debug("Not dealing with DP flows {} on {} as subscriber flow status is {}", action,
                        uti.getServiceName(), hasFlows);
                return;
            }

            if (multicastServiceName.equals(uti.getServiceName())) {
                log.debug("This is the multicast service ({}) for subscriber {} on {}, " +
                                "dataplane flows are not needed",
                        uti.getServiceName(), si.id(), portWithName(port));
                return;
            }

            log.info("{} Data plane flows for subscriber {} on {} and service {}",
                    flowOpToString(action), si.id(), portWithName(port), uti.getServiceName());
            ServiceKey sk = new ServiceKey(new AccessDevicePort(port), uti);
            OltFlowsStatus status = action.equals(FlowOperation.ADD) ?
                    OltFlowsStatus.PENDING_ADD : OltFlowsStatus.PENDING_REMOVE;
            updateConnectPointStatus(sk, null, null, status, null, null);

            // upstream flows
            MeterId usMeterId = oltMeterService
                    .getMeterIdForBandwidthProfile(device.id(), uti.getUpstreamBandwidthProfile());
            MeterId oltUsMeterId = oltMeterService
                    .getMeterIdForBandwidthProfile(device.id(), uti.getUpstreamOltBandwidthProfile());

            if (FttbUtils.isFttbService(uti)) {
                processFttbUpstreamDataFilteringObjects(device.id(), port, nniPort.get(), action,
                        usMeterId, oltUsMeterId, uti, si);
            } else {
                processUpstreamDataFilteringObjects(device.id(), port, nniPort.get(), action, usMeterId,
                        oltUsMeterId, uti);
            }

            // downstream flows
            MeterId dsMeterId = oltMeterService
                    .getMeterIdForBandwidthProfile(device.id(), uti.getDownstreamBandwidthProfile());
            MeterId oltDsMeterId = oltMeterService
                    .getMeterIdForBandwidthProfile(device.id(), uti.getDownstreamOltBandwidthProfile());

            if (FttbUtils.isFttbService(uti)) {
                processFttbDownstreamDataFilteringObjects(device.id(), port, nniPort.get(),
                        action, dsMeterId, oltDsMeterId, uti, si);
            } else {
                processDownstreamDataFilteringObjects(device.id(), port, nniPort.get(), action, dsMeterId,
                        oltDsMeterId, uti, getMacAddress(device.id(), port, uti));
            }
        });
    }

    private void processDhcpFilteringObjectives(DeviceId deviceId, Port port,
                                                FlowOperation action, FlowDirection direction,
                                                int udpSrc, int udpDst, EthType ethType, byte protocol,
                                                MeterId meterId, MeterId oltMeterId, UniTagInformation uti) {
        ServiceKey sk = new ServiceKey(new AccessDevicePort(port), uti);
        log.debug("{} DHCP filtering objectives on {}", flowOpToString(action), sk);

        String serviceName = uti.getServiceName();

        OltFlowsStatus status = action.equals(FlowOperation.ADD) ?
                OltFlowsStatus.PENDING_ADD : OltFlowsStatus.PENDING_REMOVE;
        updateConnectPointStatus(sk, null, null, null, status, null);

        DefaultFilteringObjective.Builder builder = DefaultFilteringObjective.builder();
        TrafficTreatment.Builder treatmentBuilder = DefaultTrafficTreatment.builder();

        if (meterId != null) {
            treatmentBuilder.meter(meterId);
        }

        FilteringObjective.Builder dhcpBuilder = (action == FlowOperation.ADD ? builder.permit() : builder.deny())
                .withKey(Criteria.matchInPort(port.number()))
                .addCondition(Criteria.matchEthType(ethType))
                .addCondition(Criteria.matchIPProtocol(protocol))
                .addCondition(Criteria.matchUdpSrc(TpPort.tpPort(udpSrc)))
                .addCondition(Criteria.matchUdpDst(TpPort.tpPort(udpDst)))
                .fromApp(appId)
                .withPriority(MAX_PRIORITY);

        //VLAN changes and PCP matching need to happen only in the upstream directions
        if (direction == FlowDirection.UPSTREAM) {
            if (serviceName != null && serviceName.equals(FTTB_SERVICE_DPU_MGMT_TRAFFIC)) {
                FttbUtils.addUpstreamDhcpCondition(dhcpBuilder, uti);
                FttbUtils.addUpstreamDhcpTreatment(treatmentBuilder, uti);
            } else {
                treatmentBuilder.setVlanId(uti.getPonCTag());
                if (!VlanId.vlanId(VlanId.NO_VID).equals(uti.getUniTagMatch())) {
                    dhcpBuilder.addCondition(Criteria.matchVlanId(uti.getUniTagMatch()));
                }
                if (uti.getUsPonCTagPriority() != -1) {
                    treatmentBuilder.setVlanPcp((byte) uti.getUsPonCTagPriority());
                }
            }
        } else if (direction == FlowDirection.DOWNSTREAM) {
            // Down stream DHCP vid to be matched if OLT Sadis info contains Vlan id in nniDhcpTrapVid.
            Device device = deviceService.getDevice(deviceId);
            SubscriberAndDeviceInformation oltSub = subsService.get(device.serialNumber());
            VlanId nniDhcpTrapVid = oltSub.nniDhcpTrapVid();

            if (nniDhcpTrapVid != null && !VlanId.vlanId(VlanId.NO_VID).equals(nniDhcpTrapVid)) {
                dhcpBuilder.addCondition(Criteria.matchVlanId(nniDhcpTrapVid));
            }
        }

        if (uti.getTechnologyProfileId() != NONE_TP_ID) {
            // Setting VlanId.NONE as cvlan, as the packet will be single tagged and cvlan should not be filled.
            treatmentBuilder.writeMetadata(
                    OltFlowServiceUtils.createTechProfValueForWriteMetadata(VlanId.NONE,
                            uti.getTechnologyProfileId(), oltMeterId), 0);
        }

        dhcpBuilder.withMeta(treatmentBuilder
                .setOutput(PortNumber.CONTROLLER).build());


        FilteringObjective dhcpUpstream = dhcpBuilder.add(new ObjectiveContext() {
            @Override
            public void onSuccess(Objective objective) {
                log.info("{} DHCP {} filter for {}.",
                        completeFlowOpToString(action), (ethType.equals(EthType.EtherType.IPV4.ethType())) ? V4 : V6,
                        portWithName(port));
            }

            @Override
            public void onError(Objective objective, ObjectiveError error) {
                log.error("DHCP {} filter for {} failed {} because {}",
                        (ethType.equals(EthType.EtherType.IPV4.ethType())) ? V4 : V6,
                        portWithName(port),
                        action,
                        error);
                updateConnectPointStatus(sk, null, null, null, OltFlowsStatus.ERROR, null);
            }
        });
        flowObjectiveService.filter(deviceId, dhcpUpstream);
    }

    private void processIgmpFilteringObjectives(DeviceId deviceId, Port port,
                                                FlowOperation action, FlowDirection direction,
                                                MeterId meterId, MeterId oltMeterId, int techProfileId,
                                                VlanId cTag, VlanId unitagMatch, int vlanPcp) {

        DefaultFilteringObjective.Builder filterBuilder = DefaultFilteringObjective.builder();
        TrafficTreatment.Builder treatmentBuilder = DefaultTrafficTreatment.builder();
        if (direction == FlowDirection.UPSTREAM) {

            if (techProfileId != NONE_TP_ID) {
                treatmentBuilder.writeMetadata(OltFlowServiceUtils.createTechProfValueForWriteMetadata(null,
                        techProfileId, oltMeterId), 0);
            }


            if (meterId != null) {
                treatmentBuilder.meter(meterId);
            }

            if (!VlanId.vlanId(VlanId.NO_VID).equals(unitagMatch)) {
                filterBuilder.addCondition(Criteria.matchVlanId(unitagMatch));
            }
            if (!VlanId.vlanId(VlanId.NO_VID).equals(cTag)) {
                treatmentBuilder.setVlanId(cTag);
            }

            if (vlanPcp != -1) {
                treatmentBuilder.setVlanPcp((byte) vlanPcp);
            }
        }

        filterBuilder = (action == FlowOperation.ADD) ? filterBuilder.permit() : filterBuilder.deny();

        FilteringObjective igmp = filterBuilder
                .withKey(Criteria.matchInPort(port.number()))
                .addCondition(Criteria.matchEthType(EthType.EtherType.IPV4.ethType()))
                .addCondition(Criteria.matchIPProtocol(IPv4.PROTOCOL_IGMP))
                .withMeta(treatmentBuilder
                        .setOutput(PortNumber.CONTROLLER).build())
                .fromApp(appId)
                .withPriority(MAX_PRIORITY)
                .add(new ObjectiveContext() {
                    @Override
                    public void onSuccess(Objective objective) {
                        log.info("Igmp filter for {} {}.", portWithName(port), action);
                    }

                    @Override
                    public void onError(Objective objective, ObjectiveError error) {
                        log.error("Igmp filter for {} failed {} because {}.", portWithName(port), action,
                                error);
                    }
                });

        flowObjectiveService.filter(deviceId, igmp);

    }

    private void processPPPoEDFilteringObjectives(DeviceId deviceId, Port port,
                                                  FlowOperation action, FlowDirection direction,
                                                  MeterId meterId, MeterId oltMeterId, int techProfileId,
                                                  VlanId cTag, VlanId unitagMatch, Byte vlanPcp) {

        DefaultFilteringObjective.Builder builder = DefaultFilteringObjective.builder();
        TrafficTreatment.Builder treatmentBuilder = DefaultTrafficTreatment.builder();

        if (meterId != null) {
            treatmentBuilder.meter(meterId);
        }

        if (techProfileId != NONE_TP_ID) {
            // Setting VlanId.NONE as cvlan as the packet will be single tagged and cvlan should not be filled.
            treatmentBuilder.writeMetadata(OltFlowServiceUtils.createTechProfValueForWriteMetadata(VlanId.NONE,
                    techProfileId, oltMeterId), 0);
        }

        DefaultFilteringObjective.Builder pppoedBuilder = ((action == FlowOperation.ADD)
                ? builder.permit() : builder.deny())
                .withKey(Criteria.matchInPort(port.number()))
                .addCondition(Criteria.matchEthType(EthType.EtherType.PPPoED.ethType()))
                .fromApp(appId)
                .withPriority(10000);

        if (direction == FlowDirection.UPSTREAM) {
            treatmentBuilder.setVlanId(cTag);
            if (!VlanId.vlanId(VlanId.NO_VID).equals(unitagMatch)) {
                pppoedBuilder.addCondition(Criteria.matchVlanId(unitagMatch));
            }
            if (vlanPcp != null) {
                treatmentBuilder.setVlanPcp(vlanPcp);
            }
        }
        pppoedBuilder = pppoedBuilder.withMeta(treatmentBuilder.setOutput(PortNumber.CONTROLLER).build());

        FilteringObjective pppoed = pppoedBuilder
                .add(new ObjectiveContext() {
                    @Override
                    public void onSuccess(Objective objective) {
                        log.info("PPPoED filter for {} {}.", portWithName(port), action);
                    }

                    @Override
                    public void onError(Objective objective, ObjectiveError error) {
                        log.info("PPPoED filter for {} failed {} because {}", portWithName(port),
                                action, error);
                    }
                });
        flowObjectiveService.filter(deviceId, pppoed);
    }

    private void processUpstreamDataFilteringObjects(DeviceId deviceId, Port port, Port nniPort,
                                                     FlowOperation action,
                                                     MeterId upstreamMeterId,
                                                     MeterId upstreamOltMeterId,
                                                     UniTagInformation uti) {
        ServiceKey sk = new ServiceKey(new AccessDevicePort(port), uti);
        TrafficSelector selector = DefaultTrafficSelector.builder()
                .matchInPort(port.number())
                .matchVlanId(uti.getUniTagMatch())
                .build();

        TrafficTreatment.Builder treatmentBuilder = DefaultTrafficTreatment.builder();
        //if the subscriberVlan (cTag) is different than ANY it needs to set.
        if (uti.getPonCTag().toShort() != VlanId.ANY_VALUE) {
            treatmentBuilder.pushVlan()
                    .setVlanId(uti.getPonCTag());
        }
        if (uti.getPonSTag().toShort() == VlanId.ANY_VALUE) {
            treatmentBuilder.popVlan();
        }

        if (uti.getUsPonCTagPriority() != -1) {
            treatmentBuilder.setVlanPcp((byte) uti.getUsPonCTagPriority());

        }

        treatmentBuilder.pushVlan()
                .setVlanId(uti.getPonSTag());

        if (uti.getUsPonSTagPriority() != -1) {
            treatmentBuilder.setVlanPcp((byte) uti.getUsPonSTagPriority());
        }

        treatmentBuilder.setOutput(nniPort.number())
                .writeMetadata(OltFlowServiceUtils.createMetadata(uti.getPonCTag(),
                        uti.getTechnologyProfileId(), nniPort.number()), 0L);

        DefaultAnnotations.Builder annotationBuilder = DefaultAnnotations.builder();

        if (upstreamMeterId != null) {
            treatmentBuilder.meter(upstreamMeterId);
            annotationBuilder.set(UPSTREAM_ONU, upstreamMeterId.toString());
        }
        if (upstreamOltMeterId != null) {
            treatmentBuilder.meter(upstreamOltMeterId);
            annotationBuilder.set(UPSTREAM_OLT, upstreamOltMeterId.toString());
        }

        DefaultForwardingObjective.Builder flowBuilder = createForwardingObjectiveBuilder(selector,
                treatmentBuilder.build(), MIN_PRIORITY,
                annotationBuilder.build());

        ObjectiveContext context = getSubscriberFlowBuilderContext(sk, action, FlowDirection.UPSTREAM);
        processForwardingRule(action, flowBuilder, context, deviceId);
    }

    private void processDownstreamDataFilteringObjects(DeviceId deviceId, Port port, Port nniPort,
                                                       FlowOperation action,
                                                       MeterId downstreamMeterId,
                                                       MeterId downstreamOltMeterId,
                                                       UniTagInformation uti,
                                                       MacAddress macAddress) {
        ServiceKey sk = new ServiceKey(new AccessDevicePort(port), uti);
        //subscriberVlan can be any valid Vlan here including ANY to make sure the packet is tagged
        TrafficSelector.Builder selectorBuilder = DefaultTrafficSelector.builder()
                .matchVlanId(uti.getPonSTag())
                .matchInPort(nniPort.number())
                .matchInnerVlanId(uti.getPonCTag());

        if (uti.getPonCTag().toShort() != VlanId.ANY_VALUE) {
            selectorBuilder.matchMetadata(uti.getPonCTag().toShort());
        }

        if (uti.getDsPonCTagPriority() != -1) {
            selectorBuilder.matchVlanPcp((byte) uti.getDsPonCTagPriority());
        }

        if (macAddress != null) {
            selectorBuilder.matchEthDst(macAddress);
        }

        TrafficTreatment.Builder treatmentBuilder = DefaultTrafficTreatment.builder()
                .popVlan()
                .setOutput(port.number());

        treatmentBuilder.writeMetadata(OltFlowServiceUtils.createMetadata(uti.getPonCTag(),
                uti.getTechnologyProfileId(),
                port.number()), 0);

        // Upstream pbit is used to remark inner vlan pbit.
        // Upstream is used to avoid trusting the BNG to send the packet with correct pbit.
        // this is done because ds mode 0 is used because ds mode 3 or 6 that allow for
        // all pbit acceptance are not widely supported by vendors even though present in
        // the OMCI spec.
        if (uti.getUsPonCTagPriority() != -1) {
            treatmentBuilder.setVlanPcp((byte) uti.getUsPonCTagPriority());
        }

        if (!VlanId.NONE.equals(uti.getUniTagMatch()) &&
                uti.getPonCTag().toShort() != VlanId.ANY_VALUE) {
            treatmentBuilder.setVlanId(uti.getUniTagMatch());
        }

        DefaultAnnotations.Builder annotationBuilder = DefaultAnnotations.builder();

        if (downstreamMeterId != null) {
            treatmentBuilder.meter(downstreamMeterId);
            annotationBuilder.set(DOWNSTREAM_ONU, downstreamMeterId.toString());
        }

        if (downstreamOltMeterId != null) {
            treatmentBuilder.meter(downstreamOltMeterId);
            annotationBuilder.set(DOWNSTREAM_OLT, downstreamOltMeterId.toString());
        }

        DefaultForwardingObjective.Builder flowBuilder = createForwardingObjectiveBuilder(selectorBuilder.build(),
                treatmentBuilder.build(), MIN_PRIORITY, annotationBuilder.build());

        ObjectiveContext context = getSubscriberFlowBuilderContext(sk, action, FlowDirection.DOWNSTREAM);
        processForwardingRule(action, flowBuilder, context, deviceId);
    }

    private DefaultForwardingObjective.Builder createForwardingObjectiveBuilder(TrafficSelector selector,
                                                                                TrafficTreatment treatment,
                                                                                Integer priority,
                                                                                Annotations annotations) {
        return DefaultForwardingObjective.builder()
                .withFlag(ForwardingObjective.Flag.VERSATILE)
                .withPriority(priority)
                .makePermanent()
                .withSelector(selector)
                .withAnnotations(annotations)
                .fromApp(appId)
                .withTreatment(treatment);
    }

    private boolean isMacLearningEnabled(SubscriberAndDeviceInformation si) {
        AtomicBoolean requiresMacLearning = new AtomicBoolean();
        requiresMacLearning.set(false);

        si.uniTagList().forEach(uniTagInfo -> {
            if (uniTagInfo.getEnableMacLearning()) {
                requiresMacLearning.set(true);
            }
        });

        return requiresMacLearning.get();
    }

    /**
     * Checks whether the subscriber has the MacAddress configured or discovered.
     *
     * @param deviceId DeviceId for this subscriber
     * @param port     Port for this subscriber
     * @param si       SubscriberAndDeviceInformation
     * @return boolean
     */
    protected boolean isMacAddressAvailable(DeviceId deviceId, Port port, SubscriberAndDeviceInformation si) {
        AtomicBoolean isConfigured = new AtomicBoolean();
        isConfigured.set(true);

        si.uniTagList().forEach(uniTagInfo -> {
            boolean isMacLearningEnabled = uniTagInfo.getEnableMacLearning();
            boolean configureMac = OltFlowServiceUtils.isMacAddressValid(uniTagInfo);
            boolean discoveredMac = false;

            final VlanId vlan;

            if (FttbUtils.isFttbDpuOrAncpService(uniTagInfo)) {
                // Using S tag, as C tag is replaced by Stag by ONU.
                vlan = uniTagInfo.getPonSTag();
            } else {
                vlan = uniTagInfo.getPonCTag();
            }

            Optional<Host> optHost = hostService.getConnectedHosts(new ConnectPoint(deviceId, port.number()))
                    .stream().filter(host -> host.vlan().equals(vlan)).findFirst();
            if (optHost.isPresent() && optHost.get().mac() != null) {
                discoveredMac = true;
            }
            if (isMacLearningEnabled && !configureMac && !discoveredMac) {
                log.debug("Awaiting for macAddress on {} for service {}",
                        portWithName(port), uniTagInfo.getServiceName());
                isConfigured.set(false);
            }
        });

        return isConfigured.get();
    }

    protected MacAddress getMacAddress(DeviceId deviceId, Port port, UniTagInformation uniTagInfo) {
        boolean configuredMac = OltFlowServiceUtils.isMacAddressValid(uniTagInfo);
        if (configuredMac) {
            return MacAddress.valueOf(uniTagInfo.getConfiguredMacAddress());
        } else if (uniTagInfo.getEnableMacLearning()) {
            Optional<Host> optHost = hostService.getConnectedHosts(new ConnectPoint(deviceId, port.number()))
                    .stream().filter(host -> host.vlan().equals(uniTagInfo.getPonCTag())).findFirst();
            if (optHost.isPresent() && optHost.get().mac() != null) {
                return optHost.get().mac();
            }
        }
        return null;
    }

    protected void updateConnectPointStatus(ServiceKey key, OltFlowsStatus eapolStatus,
                                            OltFlowsStatus subscriberEapolStatus,
                                            OltFlowsStatus subscriberFlowsStatus, OltFlowsStatus dhcpStatus,
                                            OltFlowsStatus pppoeStatus) {
        if (log.isTraceEnabled()) {
            log.trace("Updating cpStatus {} with values: eapolFlow={}, " +
                              "subscriberEapolStatus={}, subscriberFlows={}, dhcpFlow={}",
                      key, eapolStatus, subscriberEapolStatus, subscriberFlowsStatus, dhcpStatus);
        }
        try {
            cpStatusWriteLock.lock();
            OltPortStatus status = cpStatus.get(key);


            if (status == null) {
                // if we don't have status for the connectPoint
                // and we're only updating status to PENDING_REMOVE or ERROR
                // do not create it. This is because this case will only happen when a device is removed
                // and it's status cleaned
                List<OltFlowsStatus> statusesToIgnore = new ArrayList<>();
                statusesToIgnore.add(OltFlowsStatus.PENDING_REMOVE);
                statusesToIgnore.add(OltFlowsStatus.ERROR);

                if (
                        (statusesToIgnore.contains(subscriberFlowsStatus) && dhcpStatus == null) ||
                                (subscriberFlowsStatus == null && statusesToIgnore.contains(dhcpStatus))
                ) {
                    if (log.isTraceEnabled()) {
                        log.trace("Ignoring cpStatus update as status is meaningless");
                    }
                    return;
                }

                status = new OltPortStatus(
                        eapolStatus != null ? eapolStatus : OltFlowsStatus.NONE,
                        subscriberEapolStatus != null ? subscriberEapolStatus : OltFlowsStatus.NONE,
                        subscriberFlowsStatus != null ? subscriberFlowsStatus : OltFlowsStatus.NONE,
                        dhcpStatus != null ? dhcpStatus : OltFlowsStatus.NONE,
                        pppoeStatus != null ? pppoeStatus : OltFlowsStatus.NONE
                );
            } else {
                if (eapolStatus != null) {
                    status.defaultEapolStatus = eapolStatus;
                }
                if (subscriberFlowsStatus != null) {
                    status.subscriberFlowsStatus = subscriberFlowsStatus;
                }
                if (dhcpStatus != null) {
                    status.dhcpStatus = dhcpStatus;
                }
            }

            cpStatus.put(key, status);
        } finally {
            cpStatusWriteLock.unlock();
        }
    }

    protected class InternalFlowListener implements FlowRuleListener {
        @Override
        public void event(FlowRuleEvent event) {
            if (appId.id() != (event.subject().appId())) {
                return;
            }

            if (!oltDeviceService.isLocalLeader(event.subject().deviceId())) {
                if (log.isTraceEnabled()) {
                    log.trace("ignoring flow event {} " +
                            "as not leader for {}", event, event.subject().deviceId());
                }
                return;
            }

            switch (event.type()) {
                case RULE_ADDED:
                case RULE_REMOVED:
                    DeviceId deviceId = event.subject().deviceId();
                    Port port = getCpFromFlowRule(event.subject());
                    if (port == null) {
                        log.warn("Port is gone in ONOS, " +
                                         "manually creating it {}", event.subject());
                        PortNumber inPort = OltFlowServiceUtils.getPortNumberFromFlowRule(event.subject());
                        cpStatusReadLock.lock();
                        Optional<ServiceKey> keyWithPort = cpStatus.keySet()
                                .stream().filter(key -> key.getPort().connectPoint()
                                        .deviceId().equals(deviceId)
                                         && key.getPort().connectPoint().port()
                                        .equals(inPort)).findFirst();
                        cpStatusReadLock.unlock();
                        if (keyWithPort.isPresent()) {
                            port = new DefaultPort(deviceService.getDevice(deviceId),
                                                   inPort, false,
                                                   DefaultAnnotations.builder()
                                                           .set(AnnotationKeys.PORT_NAME,
                                                                keyWithPort.get().getPort().name())
                                                           .build());
                        } else {
                            log.warn("Can't find corresponding status for {}/{}", deviceId, inPort);
                            return;
                        }
                    }
                    if (log.isTraceEnabled()) {
                        log.trace("flow event {} on cp {}: {}", event.type(),
                                portWithName(port), event.subject());
                    }
                    updateCpStatus(event.type(), port, event.subject());
                    return;
                case RULE_ADD_REQUESTED:
                case RULE_REMOVE_REQUESTED:
                    // NOTE that PENDING_ADD/REMOVE is set when we create the flowObjective
                    return;
                default:
                    return;
            }
        }

        protected void updateCpStatus(FlowRuleEvent.Type type, Port port, FlowRule flowRule) {
            OltFlowsStatus status = OltFlowServiceUtils.flowRuleStatusToOltFlowStatus(type);
            if (OltFlowServiceUtils.isDefaultEapolFlow(flowRule)) {
                ServiceKey sk = new ServiceKey(new AccessDevicePort(port),
                        defaultEapolUniTag);
                if (log.isTraceEnabled()) {
                    log.trace("update defaultEapolStatus {} on {}", status, sk);
                }
                updateConnectPointStatus(sk, status, null, null, null, null);
            } else if (OltFlowServiceUtils.isSubscriberEapolFlow(flowRule)) {
                ServiceKey sk = getSubscriberKeyFromFlowRule(flowRule, port);
                if (sk == null) {
                    return;
                }
                if (log.isTraceEnabled()) {
                    log.trace("update subscriberEapolStatus {} on {}", status, sk);
                }
                updateConnectPointStatus(sk, null, status, null, null, null);
            } else if (OltFlowServiceUtils.isDhcpFlow(flowRule)) {
                ServiceKey sk = getSubscriberKeyFromFlowRule(flowRule, port);
                if (sk == null) {
                    return;
                }
                if (log.isTraceEnabled()) {
                    log.trace("update dhcpStatus {} on {}", status, sk);
                }
                updateConnectPointStatus(sk, null, null, null, status, null);
            } else if (OltFlowServiceUtils.isPppoeFlow(flowRule)) {
                ServiceKey sk = getSubscriberKeyFromFlowRule(flowRule, port);
                if (sk == null) {
                    return;
                }
                if (log.isTraceEnabled()) {
                    log.trace("update pppoeStatus {} on {}", status, sk);
                }
                updateConnectPointStatus(sk, null, null, null, null, status);
            } else if (OltFlowServiceUtils.isDataFlow(flowRule)) {
                PortNumber number = OltFlowServiceUtils.getPortNumberFromFlowRule(flowRule);
                if (number == null) {
                    log.error("Can't capture the port number from flow {}", flowRule);
                    return;
                }
                if (oltDeviceService.isNniPort(deviceService.getDevice(flowRule.deviceId()), number)) {
                    // the NNI has data-plane for every subscriber, doesn't make sense to track them
                    return;
                }

                ServiceKey sk = getSubscriberKeyFromFlowRule(flowRule, port);
                if (sk == null) {
                    return;
                }
                if (log.isTraceEnabled()) {
                    log.trace("update dataplaneStatus {} on {}", status, sk);
                }
                updateConnectPointStatus(sk, null, null, status, null, null);
            }
        }


        private Port getCpFromFlowRule(FlowRule flowRule) {
            DeviceId deviceId = flowRule.deviceId();
            PortNumber inPort = OltFlowServiceUtils.getPortNumberFromFlowRule(flowRule);
            if (inPort != null) {
                return deviceService.getPort(deviceId, inPort);
            }
            return null;
        }

        private ServiceKey getSubscriberKeyFromFlowRule(FlowRule flowRule, Port flowPort) {
            SubscriberAndDeviceInformation si = subsService.get(getPortName(flowPort));

            Boolean isNni = oltDeviceService.isNniPort(deviceService.getDevice(flowRule.deviceId()), flowPort.number());
            if (si == null && !isNni) {
                log.error("Subscriber information not found in sadis for port {}", portWithName(flowPort));
                return null;
            }

            if (isNni) {
                return new ServiceKey(new AccessDevicePort(flowPort), nniUniTag);
            }

            Optional<UniTagInformation> found = Optional.empty();
            VlanId flowVlan = null;
            if (OltFlowServiceUtils.isDhcpFlow(flowRule)) {
                // we need to make a special case for DHCP as in the ATT workflow DHCP flows don't match on tags
                L2ModificationInstruction.ModVlanIdInstruction instruction =
                        (L2ModificationInstruction.ModVlanIdInstruction) flowRule.treatment().immediate().get(1);
                flowVlan = instruction.vlanId();
            } else if (OltFlowServiceUtils.isSubscriberEapolFlow(flowRule)) {
                // we need to make a special case for EAPOL as in the ATT workflow EAPOL flows don't match on tags
                L2ModificationInstruction.ModVlanIdInstruction instruction =
                        (L2ModificationInstruction.ModVlanIdInstruction) flowRule.treatment().immediate().get(2);
                flowVlan = instruction.vlanId();
            } else {
                // for now we assume that if it's not DHCP it's dataplane (or at least tagged)
                VlanIdCriterion vlanIdCriterion =
                        (VlanIdCriterion) flowRule.selector().getCriterion(Criterion.Type.VLAN_VID);
                if (vlanIdCriterion == null) {
                    log.warn("cannot match the flow to a subscriber service as it does not carry vlans");
                    return null;
                }
                flowVlan = vlanIdCriterion.vlanId();
            }

            VlanId finalFlowVlan = flowVlan;
            found = si.uniTagList().stream().filter(uti ->
                    uti.getPonCTag().equals(finalFlowVlan) ||
                            uti.getPonSTag().equals(finalFlowVlan) ||
                            uti.getUniTagMatch().equals(finalFlowVlan)
            ).findFirst();


            if (found.isEmpty()) {
                log.warn("Cannot map flow rule {} to Service in {}", flowRule, si);
            }

            return found.isPresent() ? new ServiceKey(new AccessDevicePort(flowPort), found.get()) : null;

        }
    }

    protected void bindSadisService(SadisService service) {
        this.subsService = service.getSubscriberInfoService();
        this.bpService = service.getBandwidthProfileService();
        log.info("Sadis service is loaded");
    }

    protected void unbindSadisService(SadisService service) {
        this.subsService = null;
        this.bpService = null;
        log.info("Sadis service is unloaded");
    }

    private void processFttbUpstreamDataFilteringObjects(DeviceId deviceId, Port port, Port nniPort,
                                                         FlowOperation action,
                                                         MeterId upstreamMeterId,
                                                         MeterId upstreamOltMeterId,
                                                         UniTagInformation uti,
                                                         SubscriberAndDeviceInformation si) {
        String serviceName = uti.getServiceName();
        ServiceKey sk = new ServiceKey(new AccessDevicePort(port), uti);
        TrafficSelector.Builder selectorBuilder = DefaultTrafficSelector.builder()
                .matchInPort(port.number())
                .matchVlanId(uti.getPonCTag());

        if (uti.getUsPonCTagPriority() != -1) {
            selectorBuilder.matchVlanPcp((byte) uti.getUsPonCTagPriority());
        }

        TrafficTreatment.Builder treatmentBuilder = DefaultTrafficTreatment.builder();

        treatmentBuilder.setVlanId(uti.getPonSTag());
        if (uti.getUsPonSTagPriority() != -1) {
            treatmentBuilder.setVlanPcp((byte) uti.getUsPonSTagPriority());
        }

        DefaultAnnotations.Builder annotationBuilder = DefaultAnnotations.builder();
        annotationBuilder.set(FTTB_SERVICE_NAME, serviceName);
        annotationBuilder.set(FTTB_FLOW_DIRECTION, FTTB_FLOW_UPSTREAM);

        if (upstreamMeterId != null) {
            treatmentBuilder.meter(upstreamMeterId);
            annotationBuilder.set(UPSTREAM_ONU, upstreamMeterId.toString());
        }
        if (upstreamOltMeterId != null) {
            treatmentBuilder.meter(upstreamOltMeterId);
            annotationBuilder.set(UPSTREAM_OLT, upstreamOltMeterId.toString());
        }

        VlanId innerVlan = null;

        if (serviceName.equals(FTTB_SERVICE_DPU_MGMT_TRAFFIC) || serviceName.equals(FTTB_SERVICE_DPU_ANCP_TRAFFIC)) {
            MacAddress mac = FttbUtils.getMacAddressFromDhcpEnabledUti(
                    hostService, si, deviceId, port);

            if (mac == null) {
                log.error("Mac address not found port:{}, vlan:{}, service:{}",
                        port, uti.getPonSTag(), serviceName);
                return;
            }

            selectorBuilder.matchEthSrc(mac);
            innerVlan = VlanId.NONE;

        } else if (serviceName.equals(FTTB_SERVICE_SUBSCRIBER_TRAFFIC)) {
            innerVlan = VlanId.ANY;
        }

        treatmentBuilder.setOutput(nniPort.number()).writeMetadata(OltFlowServiceUtils.createMetadata(innerVlan,
                uti.getTechnologyProfileId(), nniPort.number()), 0L);

        DefaultForwardingObjective.Builder flowBuilder = createForwardingObjectiveBuilder(selectorBuilder.build(),
                treatmentBuilder.build(), MIN_PRIORITY,
                annotationBuilder.build());

        ObjectiveContext context = getSubscriberFlowBuilderContext(sk, action, FlowDirection.UPSTREAM);
        processForwardingRule(action, flowBuilder, context, deviceId);
    }

    private void processFttbDownstreamDataFilteringObjects(DeviceId deviceId, Port port, Port nniPort,
                                                           FlowOperation action,
                                                           MeterId downstreamMeterId,
                                                           MeterId downstreamOltMeterId,
                                                           UniTagInformation uti, SubscriberAndDeviceInformation si) {
        String serviceName = uti.getServiceName();
        ServiceKey sk = new ServiceKey(new AccessDevicePort(port), uti);
        //subscriberVlan can be any valid Vlan here including ANY to make sure the packet is tagged
        TrafficSelector.Builder selectorBuilder = DefaultTrafficSelector.builder()
                .matchVlanId(uti.getPonSTag())
                .matchInPort(nniPort.number());

        TrafficTreatment.Builder treatmentBuilder = DefaultTrafficTreatment.builder()
                .setVlanId(uti.getPonCTag())
                .setOutput(port.number());

        DefaultAnnotations.Builder annotationBuilder = DefaultAnnotations.builder();
        annotationBuilder.set(FTTB_SERVICE_NAME, uti.getServiceName());
        annotationBuilder.set(FTTB_FLOW_DIRECTION, FTTB_FLOW_DOWNSTREAM);

        if (downstreamMeterId != null) {
            treatmentBuilder.meter(downstreamMeterId);
            annotationBuilder.set(DOWNSTREAM_ONU, downstreamMeterId.toString());
        }

        if (downstreamOltMeterId != null) {
            treatmentBuilder.meter(downstreamOltMeterId);
            annotationBuilder.set(DOWNSTREAM_OLT, downstreamOltMeterId.toString());
        }

        VlanId innerVlan = null;

        if (serviceName.equals(FTTB_SERVICE_DPU_MGMT_TRAFFIC) || serviceName.equals(FTTB_SERVICE_DPU_ANCP_TRAFFIC)) {
            MacAddress mac = FttbUtils.getMacAddressFromDhcpEnabledUti(
                    hostService, si, deviceId, port);

            if (mac == null) {
                log.error("Mac address not found port:{}, vlan:{}, service:{}",
                        port, uti.getPonSTag(), serviceName);
                return;
            }

            selectorBuilder.matchEthDst(mac);
            innerVlan = VlanId.NONE;

        } else if (serviceName.equals(FTTB_SERVICE_SUBSCRIBER_TRAFFIC)) {
            innerVlan = VlanId.ANY;
            selectorBuilder.matchMetadata(uti.getPonSTag().toShort());
        }

        treatmentBuilder.writeMetadata(OltFlowServiceUtils.createMetadata(innerVlan,
                uti.getTechnologyProfileId(),
                port.number()), 0);

        DefaultForwardingObjective.Builder flowBuilder = createForwardingObjectiveBuilder(selectorBuilder.build(),
                treatmentBuilder.build(), MIN_PRIORITY, annotationBuilder.build());

        ObjectiveContext context = getSubscriberFlowBuilderContext(sk, action, FlowDirection.DOWNSTREAM);
        processForwardingRule(action, flowBuilder, context, deviceId);
    }

    private ObjectiveContext getSubscriberFlowBuilderContext(ServiceKey sk, FlowOperation action,
                                                             FlowDirection flowDirection) {
        ObjectiveContext context = new ObjectiveContext() {
            @Override
            public void onSuccess(Objective objective) {
                log.info("{} {} Data plane filter for {}.",
                        completeFlowOpToString(action), flowDirection, sk);
            }

            @Override
            public void onError(Objective objective, ObjectiveError error) {
                log.info("{} Data plane filter for {} failed {} because {}.",
                        flowDirection, sk, action, error);
                updateConnectPointStatus(sk, null, null, OltFlowsStatus.ERROR, null, null);
            }
        };

        return context;
    }

    private void processForwardingRule(FlowOperation action, DefaultForwardingObjective.Builder flowBuilder,
                                       ObjectiveContext context, DeviceId deviceId) {
        ForwardingObjective flow = null;
        if (action == FlowOperation.ADD) {
            flow = flowBuilder.add(context);
        } else if (action == FlowOperation.REMOVE) {
            flow = flowBuilder.remove(context);
        } else {
            log.error("Flow action not supported: {}", action);
        }

        if (flow != null) {
            if (log.isTraceEnabled()) {
                log.trace("Forwarding rule {}", flow);
            }
            flowObjectiveService.forward(deviceId, flow);
        }
    }
}