diff --git a/generated/dot1agdefaultmdlevel.go b/generated/dot1agdefaultmdlevel.go
index 2cb7823..0d1e13e 100644
--- a/generated/dot1agdefaultmdlevel.go
+++ b/generated/dot1agdefaultmdlevel.go
@@ -27,11 +27,11 @@
 
 // Dot1AgDefaultMdLevelClassID is the 16-bit ID for the OMCI
 // Managed entity Dot1ag default MD level
-const Dot1AgDefaultMdLevelClassID ClassID = ClassID(301)
+const Dot1AgDefaultMdLevelClassID = ClassID(301) // 0x012d
 
 var dot1agdefaultmdlevelBME *ManagedEntityDefinition
 
-// Dot1AgDefaultMdLevel (class ID #301)
+// Dot1AgDefaultMdLevel (Class ID: #301 / 0x012d)
 //	The collection of the functionality called a maintenance half-function (MHF) is not explicitly
 //	modelled as a ME by either [IEEE 802.1ag] or the OMCI. The ONU automatically creates MHFs
 //	according to parameters specified in a dot1ag MD or a dot1ag MA ME; the dot1ag default MD level
@@ -51,32 +51,100 @@
 //
 //	Attributes
 //		Managed Entity Id
-//			Managed entity ID: This attribute uniquely identifies an instance of this ME. Through an
-//			identical ID, this ME is implicitly linked to an instance of the MAC bridge service profile ME
-//			or an IEEE 802.1p mapper ME. It is expected that an ONU will implement CFM on bridges or on
-//			IEEE-802.1p mappers, but not both, depending on its provisioning model. For precision, the
-//			reference is disambiguated by the value of the layer 2 type pointer attribute. (R) (mandatory)
-//			(2-bytes)
+//			This attribute uniquely identifies an instance of this ME. Through an identical ID, this ME is
+//			implicitly linked to an instance of the MAC bridge service profile ME or an IEEE 802.1p mapper
+//			ME. It is expected that an ONU will implement CFM on bridges or on IEEE-802.1p mappers, but not
+//			both, depending on its provisioning model. For precision, the reference is disambiguated by the
+//			value of the layer 2 type pointer attribute. (R) (mandatory) (2-bytes)
 //
 //		Layer 2 Type
-//			Layer 2 type: This attribute specifies whether the dot1ag default MD level ME is associated with
-//			a MAC bridge service profile (value 0) or an IEEE 802.1p mapper (value-1). (R) (mandatory)
-//			(1-byte)
+//			This attribute specifies whether the dot1ag default MD level ME is associated with a MAC bridge
+//			service profile (value 0) or an IEEE 802.1p mapper (value-1). (R) (mandatory) (1-byte)
 //
 //		Catchall Level
-//			Catchall level: This attribute ranges from 0..7 and specifies the MD level of MHFs created when
-//			no specific match is found. (R,-W) (mandatory) (1-byte)
+//			This attribute ranges from 0..7 and specifies the MD level of MHFs created when no specific
+//			match is found. (R,-W) (mandatory) (1-byte)
 //
 //		Catchall Mhf Creation
+//			This attribute determines whether, when no more specific match is found, the bridge creates an
+//			MHF or not. This attribute is an enumeration with the following values:
+//
+//			1	None. The bridge does not create any MHFs. This is the default value.
+//
+//			2	Default. The bridge can create MHFs on this VID on any port through which the VID can pass.
+//
+//			3	Explicit. The bridge can create MHFs on this VID on any port through which the VID can pass,
+//			but only if an MEP exists at some lower maintenance level.
+//
 //			(R,-W) (mandatory) (1-byte)
 //
 //		Catchall Sender Id Permission
-//			Catchall sender ID permission: This attribute determines the contents of the sender ID TLV
-//			included in CFM messages transmitted by MPs when no more specific match is found. This attribute
-//			is identical to that defined in the description of the dot1ag MD ME (i.e., excluding code point
-//			5, defer). (R,-W) (mandatory) (1-byte)
+//			This attribute determines the contents of the sender ID TLV included in CFM messages transmitted
+//			by MPs when no more specific match is found. This attribute is identical to that defined in the
+//			description of the dot1ag MD ME (i.e., excluding code point 5, defer). (R,-W) (mandatory)
+//			(1-byte)
 //
 //		Default Md Level Table
+//			Each entry is a vector of fields, indexed by primary VLAN ID.
+//
+//			Primary VLAN ID (2-bytes)
+//
+//			Table control: This field controls the meaning of a set operation. The 1-byte size of this field
+//			is included in get/get-next operations, but its value is undefined under get-next and should be
+//			ignored by the OLT. (1-byte)
+//
+//			1	Add record to table; overwrite existing record, if any.
+//
+//			2	Delete record from table.
+//
+//			3	Clear all entries from table. This action may affect service and should be used judiciously.
+//
+//			Other values are reserved.
+//
+//			Status: This Boolean field indicates whether this table entry is in effect (true) or whether
+//			(false) it has been overridden by the existence of an MA for the same VID and MD level as this
+//			table's entry, and on which an up MEP is defined. This attribute is read-only. Space should be
+//			allocated for it during set operations, but the value is not used. (1-byte)
+//
+//			Level: This field ranges from 0..7 and specifies the MD level of MHFs under the control of this
+//			instance of the dot1ag default MD level. The additional value 0xFF instructs the bridge to use
+//			the value in the catch-all level attribute. (1-byte)
+//
+//			MHF creation: This attribute determines whether the bridge creates an MHF or not, under
+//			circumstances defined in clause 22.2.3 of [IEEE 802.1ag]. This attribute is an enumeration with
+//			the following values. (1-byte)
+//
+//			1	None. No MHFs are created on this bridge for this MA.
+//
+//			2	Default. The bridge can create MHFs on this VID on any port through which the VID can pass.
+//
+//			3	Explicit. The bridge can create MHFs on this VID on any port through which the VID can pass,
+//			but only if an MEP exists at some lower maintenance level.
+//
+//			4	Defer. This value causes the ONU to use the setting of the catch-all MHF creation attribute.
+//			This is recommended to be the default value.
+//
+//			Sender ID permission: This attribute determines the contents of the sender ID TLV included in
+//			CFM messages transmitted by MPs controlled by this MA. (1-byte)
+//
+//			1	None: the sender ID TLV is not to be sent, default.
+//
+//			2	Chassis: the chassis ID length, chassis ID subtype, and chassis ID fields of the sender ID TLV
+//			are to be sent, but not the management address fields.
+//
+//			3	Manage: the management address fields of the sender ID TLV are to be sent, but the chassis ID
+//			length is to be transmitted with a 0 value, and the chassis ID subtype, and chassis ID fields
+//			are not to be sent.
+//
+//			4	ChassisManage: all chassis ID and management address fields are to be sent.
+//
+//			5	Defer: the contents of the sender ID TLV is determined by the catch-all sender ID permission
+//			attribute.
+//
+//			Associated VLANs list: This field comprises a list of up to 11 additional VLAN IDs associated
+//			with the primary VLAN, 2-bytes each. Unused placeholders, possibly including the entire field,
+//			are set to 0. (22-bytes)
+//
 //			(R,-W) (mandatory) (29-bytes * N entries)
 //
 type Dot1AgDefaultMdLevel struct {