VOL-4337: Code upgrade for 3/2020 G.988 support and remaining Extended Message Set support
Change-Id: I6c5e1a167216ad9b51e9da89460e9909465ae1bc
diff --git a/generated/equipmentextensionpackage.go b/generated/equipmentextensionpackage.go
index 1deabe7..22bca67 100644
--- a/generated/equipmentextensionpackage.go
+++ b/generated/equipmentextensionpackage.go
@@ -27,11 +27,11 @@
// EquipmentExtensionPackageClassID is the 16-bit ID for the OMCI
// Managed entity Equipment extension package
-const EquipmentExtensionPackageClassID ClassID = ClassID(160)
+const EquipmentExtensionPackageClassID = ClassID(160) // 0x00a0
var equipmentextensionpackageBME *ManagedEntityDefinition
-// EquipmentExtensionPackage (class ID #160)
+// EquipmentExtensionPackage (Class ID: #160 / 0x00a0)
// This ME supports optional extensions to circuit pack MEs. If the circuit pack supports these
// features, the ONU creates and deletes this ME along with its associated real or virtual circuit
// pack.
@@ -41,16 +41,46 @@
//
// Attributes
// Managed Entity Id
-// Managed entity ID: This attribute uniquely identifies each instance of this ME. Through an
-// identical ID, this ME is implicitly linked to an instance of the ONU-G or cardholder. (R)
-// (mandatory) (2-bytes)
+// This attribute uniquely identifies each instance of this ME. Through an identical ID, this ME is
+// implicitly linked to an instance of the ONU-G or cardholder. (R) (mandatory) (2-bytes)
//
// Environmental Sense
+// This attribute provisions an ONU that supports external sense points, e.g., physical security
+// detectors at an enclosure. Each pair of bits is defined as follows.
+//
+// 00 Sense point disabled (default)
+//
+// 01 Report contact closure
+//
+// 10 Report contact open
+//
+// 11 Sense point disabled (same as 00)
+//
+// If the byte is represented in binary as 0B hhgg ffee ddcc bbaa, bits hh correspond to sense
+// point 1, while bits aa correspond to sense point 8. (R,-W) (optional) (2-bytes)
+//
// NOTE - Some specific sense point applications are already defined on the ONU-G ME. It is the
// vendor's choice how to configure and report sense points that appear both generically and
// specifically.
//
// Contact Closure Output
+// This attribute provisions an ONU that supports external contact closure outputs, e.g., sump pump
+// or air conditioner activation at an ONU enclosure. A contact point is said to be released when
+// it is not energized. Whether this corresponds to an open or a closed electrical circuit depends
+// on the ONU's wiring options. Upon ONU initialization, all contact points should go to the
+// released state.
+//
+// If the byte is represented in binary as 0B hhgg ffee ddcc bbaa, bits hh correspond to contact
+// output point 1, while bits aa correspond to contact output point 8.
+//
+// On write, the bits of this attribute have the following meaning.
+//
+// 0x No change to contact output point state
+//
+// 10 Release contact output point
+//
+// 11 Operate contact output point
+//
// On read, the left bit in each pair should be set to 0 at the ONU and ignored at the OLT. The
// right bit indicates a released output point with 0 and an operated contact point with 1. (R,-W)
// (optional) (2-bytes)