VOL-4337: Code upgrade for 3/2020 G.988 support and remaining Extended Message Set support
Change-Id: I6c5e1a167216ad9b51e9da89460e9909465ae1bc
diff --git a/generated/voipapplicationserviceprofile.go b/generated/voipapplicationserviceprofile.go
index 04bf025..2eb1fec 100644
--- a/generated/voipapplicationserviceprofile.go
+++ b/generated/voipapplicationserviceprofile.go
@@ -27,11 +27,11 @@
// VoipApplicationServiceProfileClassID is the 16-bit ID for the OMCI
// Managed entity VoIP application service profile
-const VoipApplicationServiceProfileClassID ClassID = ClassID(146)
+const VoipApplicationServiceProfileClassID = ClassID(146) // 0x0092
var voipapplicationserviceprofileBME *ManagedEntityDefinition
-// VoipApplicationServiceProfile (class ID #146)
+// VoipApplicationServiceProfile (Class ID: #146 / 0x0092)
// The VoIP application service profile defines attributes of calling features used in conjunction
// with a VoIP line service. It is optional for ONUs that support VoIP services. If a non-OMCI
// interface is used to manage SIP for VoIP, this ME is unnecessary.
@@ -44,43 +44,125 @@
//
// Attributes
// Managed Entity Id
-// Managed entity ID: This attribute uniquely identifies each instance of this ME. (R, setbycreate)
-// (mandatory) (2-bytes)
+// Managed entity ID:-This attribute uniquely identifies each instance of this ME. (R,-setbycreate)
+// (mandatory) (2 bytes)
//
// Cid Features
-// The recommended default value is 0x00. (R,-W, setbycreate) (mandatory) (1-byte)
+// This attribute contains a bit map of caller ID features. Except as noted, the bit value 0
+// disables the feature; 1 enables it.
+//
+// 0x01 Calling number
+//
+// 0x02 Calling name
+//
+// 0x04 CID blocking (both number and name)
+//
+// 0x08 CID number - Permanent presentation status for number (0 = public, 1 = private)
+//
+// 0x10 CID name - Permanent presentation status for name (0 = public, 1 = private)
+//
+// 0x20 Anonymous CID blocking (ACR). It may not be possible to support this in the ONU.
+//
+// 0x40..0x80 Not used
+//
+// The recommended default value is 0x00. (R, W, setbycreate) (mandatory) (1-byte)
//
// Call Waiting Features
// The recommended default value is 0x00. (R,-W, setbycreate) (mandatory) (1-byte)
//
+// This attribute contains a bit map of call waiting features. The bit value 0 disables the
+// feature; 1 enables it.
+//
+// 0x01 Call waiting
+//
+// 0x02 Caller ID announcement
+//
+// 0x04..0x80 Not used
+//
// Call Progress Or Transfer Features
-// The recommended default value is 0x0000. (R,-W, setbycreate) (mandatory) (2-bytes)
+// This attribute is a bit map of call processing features. The bit value 0 disables the feature; 1
+// enables it.
+//
+// 0x0001 3way
+//
+// 0x0002 Call transfer
+//
+// 0x0004 Call hold
+//
+// 0x0008 Call park
+//
+// 0x0010 Do not disturb
+//
+// 0x0020 Flash on emergency service call (flash is to be processed during an emergency service
+// call)
+//
+// 0x0040 Emergency service originating hold (determines whether call clearing is to be performed
+// on on-hook during an emergency service call)
+//
+// 0x0080 6way
+//
+// 0x0100..0x8000 Not used
+//
+// The recommended default value is 0x0000. (R, W, setbycreate) (mandatory) (2-bytes)
//
// Call Presentation Features
+// This attribute is a bit map of call presentation features. The bit value 0 disables the feature;
+// 1 enables it.
+//
+// 0x0001 Message waiting indication splash ring
+//
+// 0x0002 Message waiting indication special dial tone
+//
+// 0x0004 Message waiting indication visual indication
+//
+// 0x0008 Call forwarding indication
+//
+// 0x0010 DC voltage based visual message waiting indicator (vmwi) (e.g., neon lamp on a phone to
+// indicate a message waiting). For backwards compatibility reasons, the value 0x0010 is a
+// companion value to 0x0004. If an ONU does not support DC voltage vmwi, the ONU uses other
+// existing vmwi methods. If the ONU supports DC voltage vmwi and needs to apply DC voltage to turn
+// on the phone lamp (to indicate message waiting), the values 0x0004 and 0x0010 are set.
+//
+// 0x0020..0x8000 Not used
+//
// The recommended default value is 0x0000. (R,-W, setbycreate) (mandatory) (2-bytes)
//
// Direct Connect Feature
-// The recommended default value is 0x00. (R,-W, setbycreate) (mandatory) (1-byte)
+// This attribute is a bit map of characteristics associated with the direct connect feature. The
+// bit value 0 disables the feature; 1 enables it.
+//
+// 0x01 Direct connect feature enabled
+//
+// 0x02 Dial tone feature delay option
+//
+// The recommended default value is 0x00. (R, W, setbycreate) (mandatory) (1-byte)
//
// Direct Connect Uri Pointer
-// Direct connect URI pointer: This attribute points to a network address ME that specifies the URI
-// of the direct connect. If this attribute is set to a null pointer, no URI is defined. (R,-W,
-// setbycreate) (mandatory) (2-bytes)
+// This attribute points to a network address ME that specifies the URI of the direct connect. If
+// this attribute is set to a null pointer, no URI is defined. (R, W, setbycreate) (mandatory) (2
+// bytes)
//
// Bridged Line Agent Uri Pointer
-// Bridged line agent URI pointer: This attribute points to a network address ME that specifies the
-// URI of the bridged line agent. If this attribute is set to a null pointer, no URI is defined.
-// (R,-W, setbycreate) (mandatory) (2-bytes)
+// This attribute points to a network address ME that specifies the URI of the bridged line agent.
+// If this attribute is set to a null pointer, no URI is defined. (R, W, setbycreate) (mandatory)
+// (2 bytes)
//
// Conference Factory Uri Pointer
-// Conference factory URI pointer: This attribute points to a network address ME that specifies the
-// URI of the conference factory. If this attribute is set to a null pointer, no URI is defined.
-// (R,-W, setbycreate) (mandatory) (2-bytes)
+// This attribute points to a network address ME that specifies the URI of the conference factory.
+// If this attribute is set to a null pointer, no URI is defined. (R, W, setbycreate) (mandatory)
+// (2 bytes)
//
-// Dial Tone Feature Delay_ W Armline Timer New
+// Dial Tone Feature Delay_Warmline Timer New
// Dial tone feature delay/warmline timer (new): This attribute defines the warmline timer/dial
// tone feature delay timer (seconds). The default value 0 specifies vendor-specific
-// implementation. (R,-W) (optional) (2-bytes)
+// implementation. (R, W) (optional) (2 bytes)
+//
+// Ip Host Pointer
+// This attribute points to the IP host config data or IPv6 host config data ME associated with
+// this VoIP config data ME. This attribute is only relevant when the VoIP configuration method
+// used attribute of this ME is set to configuration file retrieval (2) OR IETF sipping config
+// framework (4). Upon instantiation ONU sets this value to NULL (0xFFFF) pointer. (R, W)
+// (optional) (2 bytes)
//
type VoipApplicationServiceProfile struct {
ManagedEntityDefinition
@@ -97,18 +179,19 @@
Get,
Set,
),
- AllowedAttributeMask: 0xff80,
+ AllowedAttributeMask: 0xffc0,
AttributeDefinitions: AttributeDefinitionMap{
- 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
- 1: ByteField("CidFeatures", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
- 2: ByteField("CallWaitingFeatures", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
- 3: Uint16Field("CallProgressOrTransferFeatures", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 3),
- 4: Uint16Field("CallPresentationFeatures", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 4),
- 5: ByteField("DirectConnectFeature", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 5),
- 6: Uint16Field("DirectConnectUriPointer", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 6),
- 7: Uint16Field("BridgedLineAgentUriPointer", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 7),
- 8: Uint16Field("ConferenceFactoryUriPointer", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 8),
- 9: Uint16Field("DialToneFeatureDelayWArmlineTimerNew", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, Write), false, true, false, 9),
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
+ 1: ByteField("CidFeatures", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
+ 2: ByteField("CallWaitingFeatures", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
+ 3: Uint16Field("CallProgressOrTransferFeatures", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 3),
+ 4: Uint16Field("CallPresentationFeatures", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 4),
+ 5: ByteField("DirectConnectFeature", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 5),
+ 6: Uint16Field("DirectConnectUriPointer", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 6),
+ 7: Uint16Field("BridgedLineAgentUriPointer", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 7),
+ 8: Uint16Field("ConferenceFactoryUriPointer", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 8),
+ 9: Uint16Field("DialToneFeatureDelayWarmlineTimerNew", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, Write), false, true, false, 9),
+ 10: Uint16Field("IpHostPointer", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, Write), false, true, false, 10),
},
Access: CreatedByOlt,
Support: UnknownSupport,