VOL-4337: Code upgrade for 3/2020 G.988 support and remaining Extended Message Set support
Change-Id: I6c5e1a167216ad9b51e9da89460e9909465ae1bc
diff --git a/generated/xdsllineconfigurationprofilepart2.go b/generated/xdsllineconfigurationprofilepart2.go
index cf5f2a3..dfdd42c 100644
--- a/generated/xdsllineconfigurationprofilepart2.go
+++ b/generated/xdsllineconfigurationprofilepart2.go
@@ -27,11 +27,11 @@
// XdslLineConfigurationProfilePart2ClassID is the 16-bit ID for the OMCI
// Managed entity xDSL line configuration profile part 2
-const XdslLineConfigurationProfilePart2ClassID ClassID = ClassID(105)
+const XdslLineConfigurationProfilePart2ClassID = ClassID(105) // 0x0069
var xdsllineconfigurationprofilepart2BME *ManagedEntityDefinition
-// XdslLineConfigurationProfilePart2 (class ID #105)
+// XdslLineConfigurationProfilePart2 (Class ID: #105 / 0x0069)
// The overall xDSL line configuration profile is modelled in several parts, all of which are
// associated together through a common ME ID (the client PPTP xDSL UNI part 1 has a single
// pointer, which refers to the entire set of line configuration profile parts).
@@ -41,48 +41,54 @@
//
// Attributes
// Managed Entity Id
-// Managed entity ID: This attribute uniquely identifies each instance of this ME. All xDSL and
-// VDSL2 line configuration profiles and extensions that pertain to a given PPTP xDSL UNI must
-// share a common ME ID. (R, setbycreate) (mandatory) (2-bytes)
+// This attribute uniquely identifies each instance of this ME. All xDSL and VDSL2 line
+// configuration profiles and extensions that pertain to a given PPTP xDSL UNI must share a common
+// ME ID. (R, setbycreate) (mandatory) (2-bytes)
//
// Downstream Minimum Time Interval For Upshift Rate Adaptation
-// Downstream minimum time interval for upshift rate adaptation: This parameter defines the
-// interval during which the downstream noise margin must remain above the downstream upshift noise
-// margin before the xTU-R attempts to increase the downstream net data rate. Its value ranges from
-// 0 to 16383-s. (R,-W, setbycreate) (optional) (2-bytes)
+// This parameter defines the interval during which the downstream noise margin must remain above
+// the downstream upshift noise margin before the xTU-R attempts to increase the downstream net
+// data rate. Its value ranges from 0 to 16383-s. (R,-W, setbycreate) (optional) (2-bytes)
//
// Upstream Minimum Time Interval For Upshift Rate Adaptation
-// Upstream minimum time interval for upshift rate adaptation: This parameter defines the interval
-// during which the upstream noise margin must remain above the upstream upshift noise margin
-// before the xTU-C attempts to increase the upstream net data rate. Its value ranges from 0 to
-// 16383-s. (R,-W, setbycreate) (optional) (2-bytes)
+// This parameter defines the interval during which the upstream noise margin must remain above the
+// upstream upshift noise margin before the xTU-C attempts to increase the upstream net data rate.
+// Its value ranges from 0 to 16383-s. (R,-W, setbycreate) (optional) (2-bytes)
//
// Downstream Downshift Noise Margin
-// Downstream downshift noise margin: If the downstream noise margin is below the downstream
-// downshift noise margin and remains there for more than the downstream minimum time interval for
-// downshift rate adaptation, the xTU-R attempts to decrease the downstream net data rate. This
-// attribute's value ranges from 0 (0.0 dB) to 310 (31.0 dB). (R,-W, setbycreate) (optional)
-// (2-bytes)
+// If the downstream noise margin is below the downstream downshift noise margin and remains there
+// for more than the downstream minimum time interval for downshift rate adaptation, the xTU-R
+// attempts to decrease the downstream net data rate. This attribute's value ranges from 0 (0.0 dB)
+// to 310 (31.0 dB). (R,-W, setbycreate) (optional) (2-bytes)
//
// Upstream Downshift Noise Margin
-// Upstream downshift noise margin: If the upstream noise margin is below the upstream downshift
-// noise margin and remains there for more than the upstream minimum time interval for downshift
-// rate adaptation, the xTUC attempts to decrease the upstream net data rate. This attribute's
-// value ranges from 0 (0.0 dB) to 310 (31.0 dB). (R,-W, setbycreate) (optional) (2-bytes)
+// If the upstream noise margin is below the upstream downshift noise margin and remains there for
+// more than the upstream minimum time interval for downshift rate adaptation, the xTUC attempts to
+// decrease the upstream net data rate. This attribute's value ranges from 0 (0.0 dB) to 310 (31.0
+// dB). (R,-W, setbycreate) (optional) (2-bytes)
//
// Downstream Minimum Time Interval For Downshift Rate Adaptation
-// Downstream minimum time interval for downshift rate adaptation: This parameter defines the
-// interval during which the downstream noise margin must remain below the downstream downshift
-// noise margin before the xTU-R attempts to decrease the downstream net data rate. Its value
-// ranges from 0 to 16383-s. (R,-W, setbycreate) (optional) (2-bytes)
+// This parameter defines the interval during which the downstream noise margin must remain below
+// the downstream downshift noise margin before the xTU-R attempts to decrease the downstream net
+// data rate. Its value ranges from 0 to 16383-s. (R,-W, setbycreate) (optional) (2-bytes)
//
// Upstream Minimum Time Interval For Downshift Rate Adaptation
-// Upstream minimum time interval for downshift rate adaptation: This parameter defines the
-// interval during which the upstream noise margin must remain below the upstream downshift noise
-// margin before the xTU-C attempts to decrease the upstream net data rate. Its value ranges from 0
-// to 16383-s. (R,-W, setbycreate) (optional) (2-bytes)
+// This parameter defines the interval during which the upstream noise margin must remain below the
+// upstream downshift noise margin before the xTU-C attempts to decrease the upstream net data
+// rate. Its value ranges from 0 to 16383-s. (R,-W, setbycreate) (optional) (2-bytes)
//
// Xtu Impedance State Forced
+// This parameter forces the impedance state of the xTU-C. It applies only to the T/S interface,
+// and is deprecated in the OMCI, which stands proxy for the Q interface. It is only valid for
+// Annex A of [ITUT G.992.3], Annex A of [ITUT G.992.4] and Annex A of [ITUT G.992.5]. It is
+// defined as follows.
+//
+// 1 Force the xTU-C to the disabled state.
+//
+// 2 Force the xTU-C to the inactive state.
+//
+// 3 Force the xTU-C to the active state.
+//
// (R,-W, setbycreate) (optional) (1-byte)
//
// L0_Time
@@ -97,30 +103,30 @@
// W, setbycreate) (mandatory) (1 byte)
//
// Downstream Maximum Nominal Power Spectral Density
-// Downstream maximum nominal power spectral density: This attribute specifies the maximum nominal
-// transmit PSD in the downstream direction during initialization and showtime. A single
-// MAXNOMPSDds attribute is defined per mode enabled in the xTSE line configuration attribute. It
-// is only valid for [ITUT-G.992.3], [ITUT-G.992.4] and [ITUT-G.992.5]. Its value ranges from 0
-// (60.0-dBm/Hz) to 300 (-30-dBm/Hz). (R, W, setbycreate) (mandatory) (2 bytes)
+// This attribute specifies the maximum nominal transmit PSD in the downstream direction during
+// initialization and showtime. A single MAXNOMPSDds attribute is defined per mode enabled in the
+// xTSE line configuration attribute. It is only valid for [ITUT-G.992.3], [ITUT-G.992.4] and
+// [ITUT-G.992.5]. Its value ranges from 0 (60.0-dBm/Hz) to 300 (-30-dBm/Hz). (R, W, setbycreate)
+// (mandatory) (2 bytes)
//
// Upstream Maximum Nominal Power Spectral Density
-// Upstream maximum nominal power spectral density: This attribute specifies the maximum nominal
-// transmit PSD in the upstream direction during initialization and showtime. A single MAXNOMPSDus
-// attribute is defined per mode enabled in the xTSE line configuration attribute. It is only valid
-// for [ITUT-G.992.3], [ITUT-G.992.4] and [ITUT-G.993.2]. Its value ranges from 0 (-60.0-dBm/Hz) to
-// 300 (-30-dBm/Hz). (R, W, setbycreate) (mandatory) (2 bytes)
+// This attribute specifies the maximum nominal transmit PSD in the upstream direction during
+// initialization and showtime. A single MAXNOMPSDus attribute is defined per mode enabled in the
+// xTSE line configuration attribute. It is only valid for [ITUT-G.992.3], [ITUT-G.992.4] and
+// [ITUT-G.993.2]. Its value ranges from 0 (-60.0-dBm/Hz) to 300 (-30-dBm/Hz). (R, W, setbycreate)
+// (mandatory) (2 bytes)
//
// Downstream Maximum Nominal Aggregate Transmit Power
-// Downstream maximum nominal aggregate transmit power: This attribute specifies the maximum
-// nominal aggregate transmit power in the downstream direction during initialization and showtime.
-// It is only valid for [ITUT-G.992.3], [ITUT-G.992.4], [ITUT-G.992.5] and [ITUT-G.993.2]. Its
-// value ranges from 0 (0.0-dBm) to 255 (25.5-dBm). (R, W, setbycreate) (mandatory) (1-byte)
+// This attribute specifies the maximum nominal aggregate transmit power in the downstream
+// direction during initialization and showtime. It is only valid for [ITUT-G.992.3],
+// [ITUT-G.992.4], [ITUT-G.992.5] and [ITUT-G.993.2]. Its value ranges from 0 (0.0-dBm) to 255
+// (25.5-dBm). (R, W, setbycreate) (mandatory) (1-byte)
//
// Upstream Maximum Nominal Aggregate Transmit Power
-// Upstream maximum nominal aggregate transmit power: This parameter specifies the maximum nominal
-// aggregate transmit power in the upstream direction during initialization and showtime. It is
-// only valid for [ITUT-G.992.3], [ITUT-G.992.4] and [ITUT-G.992.5]. Its value ranges from 0
-// (0.0-dBm) to 255 (25.5-dBm). (R, W, setbycreate) (mandatory) (1 byte)
+// This parameter specifies the maximum nominal aggregate transmit power in the upstream direction
+// during initialization and showtime. It is only valid for [ITUT-G.992.3], [ITUT-G.992.4] and
+// [ITUT-G.992.5]. Its value ranges from 0 (0.0-dBm) to 255 (25.5-dBm). (R, W, setbycreate)
+// (mandatory) (1 byte)
//
// Upstream Maximum Aggregate_Receive Power
// Upstream maximum aggregate-receive power: This parameter specifies the maximum upstream
@@ -132,9 +138,9 @@
// power limit is to be applied. (R, W setbycreate) (mandatory) (2 bytes)
//
// Vdsl2 Transmission System Enabling
-// VDSL2 transmission system enabling: This configuration attribute extends the transmission system
-// coding types to be allowed by the xTU-C. It is a bit map, defined as octet 8 (bits 57..64) in
-// Table-9.7.12-1. (R, W, setbycreate) (optional) (1 byte)
+// This configuration attribute extends the transmission system coding types to be allowed by the
+// xTU-C. It is a bit map, defined as octet 8 (bits 57..64) in Table-9.7.12-1. (R, W, setbycreate)
+// (optional) (1 byte)
//
type XdslLineConfigurationProfilePart2 struct {
ManagedEntityDefinition
@@ -167,7 +173,7 @@
11: Uint16Field("UpstreamMaximumNominalPowerSpectralDensity", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 11),
12: ByteField("DownstreamMaximumNominalAggregateTransmitPower", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 12),
13: ByteField("UpstreamMaximumNominalAggregateTransmitPower", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 13),
- 14: Uint16Field("UpstreamMaximumAggregateReceivePower", UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read), false, false, false, 14),
+ 14: Uint16Field("UpstreamMaximumAggregateReceivePower", UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 14),
15: ByteField("Vdsl2TransmissionSystemEnabling", UnsignedIntegerAttributeType, 0x0002, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 15),
},
Access: CreatedByOlt,