diff --git a/generated/physicalpathterminationpointxdslunipart1.go b/generated/physicalpathterminationpointxdslunipart1.go
new file mode 100644
index 0000000..a2b2311
--- /dev/null
+++ b/generated/physicalpathterminationpointxdslunipart1.go
@@ -0,0 +1,160 @@
+/*
+ * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ *              https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// PhysicalPathTerminationPointXdslUniPart1ClassID is the 16-bit ID for the OMCI
+// Managed entity Physical path termination point xDSL UNI part 1
+const PhysicalPathTerminationPointXdslUniPart1ClassID ClassID = ClassID(98)
+
+var physicalpathterminationpointxdslunipart1BME *ManagedEntityDefinition
+
+// PhysicalPathTerminationPointXdslUniPart1 (class ID #98)
+//	This ME represents the point where physical paths terminate on an xDSL CO modem (xTU-C). The
+//	xDSL ME family is used for ADSL VDSL2 and FAST services. A legacy family of VDSL MEs remains
+//	valid for ITUT G.993.1 VDSL, if needed. It is documented in [ITUT G.983.2].
+//
+//	The ONU automatically creates an instance of this ME per port:
+//
+//	o	when the ONU has xDSL ports built into its factory configuration;
+//
+//	o	when a cardholder is provisioned to expect a circuit pack of the xDSL type;
+//
+//	o	when a cardholder provisioned for plug-and-play is equipped with a circuit pack of the xDSL
+//	type. Note that the installation of a plug-and-play card may indicate the presence of xDSL ports
+//	via equipment ID as well as its type, and indeed may cause the ONU to instantiate a port-mapping
+//	package that specifies xDSL ports.
+//
+//	The ONU automatically deletes instances of this ME when a cardholder is neither provisioned to
+//	expect an xDSL circuit pack, nor is it equipped with an xDSL circuit pack.
+//
+//	Relationships
+//		An instance of this ME is associated with each instance of a real or pre-provisioned xDSL port.
+//
+//	Attributes
+//		Managed Entity Id
+//			Managed entity ID:	This attribute uniquely identifies each instance of this ME. This 2 byte
+//			number indicates the physical position of the UNI. The six LSBs of the first byte are the slot
+//			ID, defined in clause 9.1.5. The two MSBs indicate the channel number in some of the implicitly
+//			linked MEs, and must be 0 in the PPTP itself. This reduces the possible number of physical slots
+//			to 64. The second byte is the port ID, with the range 1..255. (R) (mandatory) (2-bytes)
+//
+//		Loopback Configuration
+//			Upon ME instantiation, the ONU sets this attribute to 0. (R,-W) (mandatory) (1-byte)
+//
+//		Administrative State
+//			Administrative state: This attribute locks (1) and unlocks (0) the functions performed by this
+//			ME. Administrative state is further described in clause A.1.6. (R,-W) (mandatory) (1-byte)
+//
+//		Operational State
+//			Operational state: This attribute indicates whether the ME is capable of performing its
+//			function. Valid values are enabled (0) and disabled (1). (R) (optional) (1-byte)
+//
+//		Xdsl Line Configuration Profile
+//			xDSL line configuration profile: This attribute points to an instance of the xDSL line
+//			configuration profiles (part 1, 2 and 3) MEs, and if necessary, also to VDSL2 line configuration
+//			extensions (1 and 2) MEs, also to vectoring line configuration extension MEs. Upon ME
+//			instantiation, the ONU sets this attribute to 0, a null pointer. (R,-W) (mandatory) (2-bytes)
+//
+//		Xdsl Subcarrier Masking Downstream Profile
+//			xDSL subcarrier masking downstream profile: This attribute points to an instance of the xDSL
+//			subcarrier masking downstream profile ME. Upon ME instantiation, the ONU sets this attribute to
+//			0, a null pointer. (R,-W) (mandatory) (2-bytes)
+//
+//		Xdsl Subcarrier Masking Upstream Profile
+//			xDSL subcarrier masking upstream profile: This attribute points to an instance of the xDSL
+//			subcarrier masking upstream profile ME. Upon ME instantiation, the ONU sets this attribute to 0,
+//			a null pointer. (R,-W) (mandatory) (2-bytes)
+//
+//		Xdsl Downstream Power Spectral Density Psd Mask Profile
+//			xDSL downstream power spectral density (PSD) mask profile: This attribute points to an instance
+//			of the xDSL PSD mask profile ME that defines downstream parameters. Upon ME instantiation, the
+//			ONU sets this attribute to 0, a null pointer. (R,-W) (mandatory) (2-bytes)
+//
+//		Xdsl Downstream Rfi Bands Profile
+//			xDSL downstream RFI bands profile: This attribute points to an instance of the xDSL downstream
+//			RFI bands profile ME. Upon ME instantiation, the ONU sets this attribute to 0, a null pointer.
+//			(R,-W) (mandatory) (2-bytes)
+//
+//		Arc
+//			ARC:	See clause A.1.4.3. (R,-W) (optional) (1-byte)
+//
+//		Arc Interval
+//			ARC interval: See clause A.1.4.3. (R,-W) (optional) (1-byte)
+//
+//		Modem Type
+//			NOTE - Many newer VDSL2 chip sets support only PTM. The ATM default is retained for backward
+//			compatibility, but implementers should be aware that the default may need to be overridden by
+//			provisioning before the xDSL UNI can be brought into service.
+//
+//		Upstream Psd Mask Profile
+//			Upstream PSD mask profile: This attribute points to an instance of the xDSL PSD mask profile
+//			that defines upstream parameters. Upon ME instantiation, the ONU sets this attribute to 0, a
+//			null pointer. (R,-W) (optional) (2-bytes)
+//
+//		Network Specific Extensions Pointer
+//			Network specific extensions pointer: This attribute points to a network address ME that contains
+//			the path and name of a file containing network specific parameters for the associated UNI. Upon
+//			ME instantiation, the ONU sets this attribute to 0xFFFF, a null pointer. (R,-W) (optional)
+//			(2-bytes)
+//
+type PhysicalPathTerminationPointXdslUniPart1 struct {
+	ManagedEntityDefinition
+	Attributes AttributeValueMap
+}
+
+func init() {
+	physicalpathterminationpointxdslunipart1BME = &ManagedEntityDefinition{
+		Name:    "PhysicalPathTerminationPointXdslUniPart1",
+		ClassID: 98,
+		MessageTypes: mapset.NewSetWith(
+			Get,
+			Set,
+		),
+		AllowedAttributeMask: 0xfff8,
+		AttributeDefinitions: AttributeDefinitionMap{
+			0:  Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+			1:  ByteField("LoopbackConfiguration", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, false, false, 1),
+			2:  ByteField("AdministrativeState", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, Write), false, false, false, 2),
+			3:  ByteField("OperationalState", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read), true, true, false, 3),
+			4:  Uint16Field("XdslLineConfigurationProfile", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, false, false, 4),
+			5:  Uint16Field("XdslSubcarrierMaskingDownstreamProfile", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, Write), false, false, false, 5),
+			6:  Uint16Field("XdslSubcarrierMaskingUpstreamProfile", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, Write), false, false, false, 6),
+			7:  Uint16Field("XdslDownstreamPowerSpectralDensityPsdMaskProfile", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, Write), false, false, false, 7),
+			8:  Uint16Field("XdslDownstreamRfiBandsProfile", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), false, false, false, 8),
+			9:  ByteField("Arc", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, Write), true, true, false, 9),
+			10: ByteField("ArcInterval", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, Write), false, true, false, 10),
+			11: ByteField("ModemType", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, Write), false, true, false, 11),
+			12: Uint16Field("UpstreamPsdMaskProfile", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, Write), false, true, false, 12),
+			13: Uint16Field("NetworkSpecificExtensionsPointer", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read, Write), false, true, false, 13),
+		},
+		Access:  CreatedByOnu,
+		Support: UnknownSupport,
+	}
+}
+
+// NewPhysicalPathTerminationPointXdslUniPart1 (class ID 98) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewPhysicalPathTerminationPointXdslUniPart1(params ...ParamData) (*ManagedEntity, OmciErrors) {
+	return NewManagedEntity(*physicalpathterminationpointxdslunipart1BME, params...)
+}