Import of https://github.com/cboling/omci at commit 7495182a09db38a9b6454a4a457fdd111c1618ac
Change-Id: I3250449080300b21b9d81c64dcc33f98f2e4cd1b
diff --git a/generated/vdsl2lineinventoryandstatusdatapart1.go b/generated/vdsl2lineinventoryandstatusdatapart1.go
new file mode 100644
index 0000000..21a078f
--- /dev/null
+++ b/generated/vdsl2lineinventoryandstatusdatapart1.go
@@ -0,0 +1,154 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// Vdsl2LineInventoryAndStatusDataPart1ClassID is the 16-bit ID for the OMCI
+// Managed entity VDSL2 line inventory and status data part 1
+const Vdsl2LineInventoryAndStatusDataPart1ClassID ClassID = ClassID(168)
+
+var vdsl2lineinventoryandstatusdatapart1BME *ManagedEntityDefinition
+
+// Vdsl2LineInventoryAndStatusDataPart1 (class ID #168)
+// This ME extends the xDSL line configuration MEs. The ME name was chosen because its attributes
+// were initially unique to ITU-T G.993.2 VDSL2. Due to continuing standards development, some
+// attributes - and therefore this ME - have also become applicable to other Recommendations,
+// specifically [ITU-T G.992.3] and [ITU-T G.992.5].
+//
+// This ME contains general and downstream attributes.
+//
+// Relationships
+// This is one of the status data MEs associated with an xDSL UNI. It is meaningful if the PPTP
+// supports [ITU-T G.992.3], [ITU-T G.992.5] or [ITU-T G.993.2]. The ONU automatically creates or
+// deletes an instance of this ME upon creation and deletion of a PPTP xDSL UNI part 1 that
+// supports these attributes.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. Through an
+// identical ID, this ME is implicitly linked to an instance of the PPTP xDSL UNI part 1 ME. (R)
+// (mandatory) (2-bytes)
+//
+// Vdsl2 Transmission System Capability Xtu C
+// VDSL2 transmission system capability xTUC: This attribute extends the xTU-C transmission system
+// capability attribute of the xDSL line inventory and status data part 1 to include xTU-C VDSL2
+// capabilities. It is defined by bits 57..64 of Table 9.7.12-1. (R) (mandatory) (1-byte)
+//
+// Vdsl2 Transmission System
+// VDSL2 transmission system: This attribute reports the transmission system in use. It extends the
+// xDSL transmission system attribute of the xDSL line inventory and status data part 2 ME with a
+// byte that includes VDSL2 capabilities currently in use. It is defined by bits 57..64 of Table
+// 9.7.12-1. (R) (mandatory) (1-byte)
+//
+// Vdsl2 Profile
+// (R) (mandatory) (1-byte)
+//
+// Vdsl2 Limit Psd Mask And Bandplan
+// VDSL2 limit PSD mask and bandplan: This attribute defines the limit PSD mask and band plan in
+// use. It is a bit map as defined by Table 9.7.6-1. (R) (mandatory) (8-bytes)
+//
+// Vdsl2 Us0 Psd Mask
+// VDSL2 US0 PSD mask: This attribute defines the US0 PSD mask in use. It is a bit map as defined
+// by Table 9.7.62. (R) (mandatory) (4-bytes)
+//
+// Actsnrmodeds
+// (R) (mandatory) (1-byte)
+//
+// Hlingds
+// HLINGds: This attribute contains the number of subcarriers per group used to report HLINpsds.
+// (R) (mandatory) (1-byte)
+//
+// Hloggds
+// HLOGGds: This attribute contains the number of subcarriers per group used to report HLOGpsds.
+// (R) (mandatory) (1-byte)
+//
+// Qlngds
+// QLNGds: This attribute contains the number of subcarriers per group used to report QLNpsds. (R)
+// (mandatory) (1-byte)
+//
+// Snrgds
+// SNRGds: This attribute contains the number of subcarriers per group used to report SNRpsds. (R)
+// (mandatory) (1-byte)
+//
+// Mrefpsdds Table
+// (R) (mandatory) (3 * N bytes, where N is the number of breakpoints)
+//
+// Trellisds
+// (R) (mandatory for ITU-T G.993.2 VDSL2, optional for others) (1-byte)
+//
+// Actual Rate Adaptation Mode Downstream
+// (R) (optional) (1-byte)
+//
+// Actual Impulse Noise Protection Robust Operations Channel Roc Downstream
+// Actual impulse noise protection robust operations channel (ROC) downstream: The ACTINP-ROC-ds
+// attribute reports the actual INP of the ROC in the downstream direction expressed in multiples
+// of T4k. The INP of this attribute is equal to the integer value multiplied by 0.1 symbols. Valid
+// values and usage are given in clause 7.5.1.34.1 of [ITUT-G.997.1]. (R) (optional) (1-byte)
+//
+// Snr Margin Roc Downstream
+// SNR margin ROC downstream: The SNRM-ROC-ds attribute reports the actual signal-to-noise margin
+// of the ROC in the downstream direction. Its value ranges from 0 (-64.0-dB) to 1270 (+63.0-dB).
+// The special value 0xFFFF indicates that the attribute is out of range. (R) (optional) (2-bytes)
+//
+type Vdsl2LineInventoryAndStatusDataPart1 struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ vdsl2lineinventoryandstatusdatapart1BME = &ManagedEntityDefinition{
+ Name: "Vdsl2LineInventoryAndStatusDataPart1",
+ ClassID: 168,
+ MessageTypes: mapset.NewSetWith(
+ Get,
+ GetNext,
+ ),
+ AllowedAttributeMask: 0xfffe,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+ 1: ByteField("Vdsl2TransmissionSystemCapabilityXtuC", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read), false, false, false, 1),
+ 2: ByteField("Vdsl2TransmissionSystem", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), false, false, false, 2),
+ 3: ByteField("Vdsl2Profile", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read), false, false, false, 3),
+ 4: Uint64Field("Vdsl2LimitPsdMaskAndBandplan", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read), false, false, false, 4),
+ 5: Uint32Field("Vdsl2Us0PsdMask", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read), false, false, false, 5),
+ 6: ByteField("Actsnrmodeds", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read), false, false, false, 6),
+ 7: ByteField("Hlingds", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read), false, false, false, 7),
+ 8: ByteField("Hloggds", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read), false, false, false, 8),
+ 9: ByteField("Qlngds", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read), false, false, false, 9),
+ 10: ByteField("Snrgds", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read), false, false, false, 10),
+ 11: TableField("MrefpsddsTable", TableAttributeType, 0x0020, TableInfo{nil, 3}, mapset.NewSetWith(Read), false, false, false, 11),
+ 12: ByteField("Trellisds", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read), false, false, false, 12),
+ 13: ByteField("ActualRateAdaptationModeDownstream", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read), false, true, false, 13),
+ 14: ByteField("ActualImpulseNoiseProtectionRobustOperationsChannelRocDownstream", UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read), false, true, false, 14),
+ 15: Uint16Field("SnrMarginRocDownstream", UnsignedIntegerAttributeType, 0x0002, 0, mapset.NewSetWith(Read), false, true, false, 15),
+ },
+ Access: CreatedByOnu,
+ Support: UnknownSupport,
+ }
+}
+
+// NewVdsl2LineInventoryAndStatusDataPart1 (class ID 168) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewVdsl2LineInventoryAndStatusDataPart1(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*vdsl2lineinventoryandstatusdatapart1BME, params...)
+}