Import of https://github.com/cboling/omci at commit 7495182a09db38a9b6454a4a457fdd111c1618ac
Change-Id: I3250449080300b21b9d81c64dcc33f98f2e4cd1b
diff --git a/generated/xdslchannelconfigurationprofile.go b/generated/xdslchannelconfigurationprofile.go
new file mode 100644
index 0000000..5e701a2
--- /dev/null
+++ b/generated/xdslchannelconfigurationprofile.go
@@ -0,0 +1,179 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// XdslChannelConfigurationProfileClassID is the 16-bit ID for the OMCI
+// Managed entity xDSL channel configuration profile
+const XdslChannelConfigurationProfileClassID ClassID = ClassID(107)
+
+var xdslchannelconfigurationprofileBME *ManagedEntityDefinition
+
+// XdslChannelConfigurationProfile (class ID #107)
+// This ME contains the channel configuration profile for an xDSL UNI. An instance of this ME is
+// created and deleted by the OLT.
+//
+// NOTE - If [ITUT G.997.1] compatibility is required, bit rates should only be set to integer
+// multiples of 1000-bits/s. The ONU may reject attempts to set other values for bit rate
+// attributes.
+//
+// Relationships
+// An instance of this ME may be associated with zero or more instances of the PPTP xDSL UNI part
+// 1.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. The value 0 is
+// reserved. (R, setbycreate) (mandatory) (2-bytes)
+//
+// Minimum Data Rate
+// Minimum data rate: This parameter specifies the minimum desired net data rate for the bearer
+// channel. It is coded in bits per second. (R,-W, setbycreate) (mandatory) (4-bytes)
+//
+// Maximum Data Rate
+// Maximum data rate: This parameter specifies the maximum desired net data rate for the bearer
+// channel. It is coded in bits per second. (R,-W, setbycreate) (mandatory) (4-bytes)
+//
+// Rate Adaptation Ratio
+// Rate adaptation ratio: This attribute specifies the weight that should be taken into account
+// when performing rate adaptation in the direction of the bearer channel. The attribute is defined
+// as a percentage. The value 20, for example, means that 20% of the available data rate (in excess
+// of the minimum data rate summed over all bearer channels) is assigned to this bearer channel and
+// 80% to the other bearer channels. The OLT must ensure that the sum of rate adaptation ratios
+// over all bearers in one direction is 100%. (R,-W, setbycreate) (optional) (1-byte)
+//
+// Maximum Interleaving Delay
+// The delay is coded in milliseconds, varying from 2 to 63, with special meaning assigned to
+// values 0, 1 and 255. The value 0 indicates that no delay bound is imposed. The value 1 indicates
+// the fast latency path is to be used in the ITUT G.992.1 operating mode and S and D are to be
+// selected such that S- 1 and D-= 1 in ITU-T G.992.2, ITUT G.992.3, ITUT G.992.4, ITUT G.992.5 and
+// ITUT G.993.2 operating modes. The value 255 indicates a delay bound of 1-ms in ITUT-G.993.2
+// operation. (R,-W, setbycreate) (mandatory) (1-byte)
+//
+// Data Rate Threshold Upshift
+// Data rate threshold upshift: This attribute is a threshold on the cumulative data rate upshift
+// achieved over one or more bearer channel data rate adaptations. An upshift rate change (DRT up)
+// notification is issued by the PPTP xDSL UNI part 1 when the actual data rate exceeds the data
+// rate at the last entry into showtime by more than the threshold. The data rate threshold is
+// coded in bits per second. (R,-W, setbycreate) (mandatory for xDSL standards that use this
+// attribute) (4-bytes)
+//
+// Data Rate Threshold Downshift
+// Data rate threshold downshift: This attribute is a threshold on the cumulative data rate
+// downshift achieved over one or more bearer channel data rate adaptations. A downshift rate
+// change (DRT down) notification is issued by the PPTP xDSL UNI part 1 when the actual data rate
+// is below the data rate at the last entry into showtime by more than the threshold. The data rate
+// threshold is coded in bits per second. (R,-W, setbycreate) (mandatory for xDSL standards that
+// use this attribute) (4-bytes)
+//
+// Minimum Reserved Data Rate
+// Minimum reserved data rate: This attribute specifies the desired minimum reserved net data rate
+// for the bearer channel. The rate is coded in bits per second. This attribute is needed only if
+// the rate adaptation mode is set to dynamic in the xDSL line configuration profile part 1. (R,-W,
+// setbycreate) (optional) (4-bytes)
+//
+// Minimum Data Rate In Low _ Power State
+// Minimum data rate in low-power state: This parameter specifies the minimum desired net data rate
+// for the bearer channel during the low-power state (L1/L2). The power management low-power states
+// L1 and L2 are defined in [ITUT-G.992.2] and [ITUT G.992.3], respectively. The data rate is coded
+// in bits per second. (R,-W, setbycreate) (mandatory) (4-byte)
+//
+// Minimum Impulse Noise Protection
+// (R,-W, setbycreate) (optional for [ITU-T G.992.1], mandatory for other xDSL standards that use
+// this attribute) (1-byte)
+//
+// Maximum Bit Error Ratio
+// (R,-W, setbycreate) (mandatory for standards that use this attribute) (1-byte)
+//
+// Minimum Impulse Noise Protection 8_Khz
+// Minimum impulse noise protection 8-kHz: The INPmin8 attribute specifies the minimum INP for the
+// bearer channel if it is transported over DMT symbols with a subcarrier spacing of 8.625-kHz. It
+// is only valid for [ITUT-G.993.2]. INP is expressed in DMT symbols with a subcarrier spacing of
+// 8.625-kHz. It can take any integer value from 0 (default) to 16, inclusive. (R, W) (mandatory
+// for [ITUT-G.993.2]) (1 byte)
+//
+// Maximum Delay Variation
+// Maximum delay variation: The DVMAX attribute specifies the maximum value for delay variation
+// allowed in an OLR procedure. Its value ranges from 1 (0.1-ms) to 254 (25.4-ms). The special
+// value 255 specifies that no delay variation bound is imposed. (R, W) (optional: used by
+// [ITUT-G.993.2]) (1 byte)
+//
+// Channel Initialization Policy Selection
+// Channel initialization policy selection: The CIPOLICY attribute specifies the policy to
+// determine transceiver configuration at initialization. Valid values are 0..1, as defined in the
+// Recommendations that use this attribute. (R,-W) (optional) (1-byte)
+//
+// Minimum Sos Bit Rate Downstream
+// Minimum SOS bit rate downstream: The MIN-SOS-BR-ds attribute specifies the minimum net data rate
+// required for a valid SOS request in the downstream direction. The value is coded as an unsigned
+// integer representing the data rate as a multiple of 8-kbit/s. (R,-W) (optional) (4-bytes)
+//
+// Minimum Sos Bit Rate Upstream
+// Minimum SOS bit rate upstream: The MIN-SOS-BR-us attribute specifies the minimum net data rate
+// required for a valid SOS request in the upstream direction. The value is coded as an unsigned
+// integer representing the data rate as a multiple of 8-kbit/s. (R,-W) (optional) (4-bytes)
+//
+type XdslChannelConfigurationProfile struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ xdslchannelconfigurationprofileBME = &ManagedEntityDefinition{
+ Name: "XdslChannelConfigurationProfile",
+ ClassID: 107,
+ MessageTypes: mapset.NewSetWith(
+ Create,
+ Delete,
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0xfffe,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
+ 1: Uint32Field("MinimumDataRate", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
+ 2: Uint32Field("MaximumDataRate", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
+ 3: ByteField("RateAdaptationRatio", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 3),
+ 4: ByteField("MaximumInterleavingDelay", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 4),
+ 5: Uint32Field("DataRateThresholdUpshift", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 5),
+ 6: Uint32Field("DataRateThresholdDownshift", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 6),
+ 7: Uint32Field("MinimumReservedDataRate", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 7),
+ 8: Uint32Field("MinimumDataRateInLowPowerState", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 8),
+ 9: ByteField("MinimumImpulseNoiseProtection", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 9),
+ 10: ByteField("MaximumBitErrorRatio", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 10),
+ 11: ByteField("MinimumImpulseNoiseProtection8Khz", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, Write), false, false, false, 11),
+ 12: ByteField("MaximumDelayVariation", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, Write), false, false, false, 12),
+ 13: ByteField("ChannelInitializationPolicySelection", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read, Write), false, true, false, 13),
+ 14: Uint32Field("MinimumSosBitRateDownstream", UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read, Write), false, true, false, 14),
+ 15: Uint32Field("MinimumSosBitRateUpstream", UnsignedIntegerAttributeType, 0x0002, 0, mapset.NewSetWith(Read, Write), false, true, false, 15),
+ },
+ Access: CreatedByOlt,
+ Support: UnknownSupport,
+ }
+}
+
+// NewXdslChannelConfigurationProfile (class ID 107) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewXdslChannelConfigurationProfile(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*xdslchannelconfigurationprofileBME, params...)
+}