Finish porting to ONF infrastructure
- change of imports
- Adding vendor folder
- licensing
Change-Id: If2e7ed27d603668b848ae58c135e94a8db13a9e2
diff --git a/vendor/github.com/google/gopacket/layers/bfd.go b/vendor/github.com/google/gopacket/layers/bfd.go
new file mode 100644
index 0000000..43030fb
--- /dev/null
+++ b/vendor/github.com/google/gopacket/layers/bfd.go
@@ -0,0 +1,481 @@
+// Copyright 2017 Google, Inc. All rights reserved.
+//
+// Use of this source code is governed by a BSD-style license
+// that can be found in the LICENSE file in the root of the source
+// tree.
+//
+
+package layers
+
+import (
+ "encoding/binary"
+ "errors"
+
+ "github.com/google/gopacket"
+)
+
+// BFD Control Packet Format
+// -------------------------
+// The current version of BFD's RFC (RFC 5880) contains the following
+// diagram for the BFD Control packet format:
+//
+// 0 1 2 3
+// 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+// |Vers | Diag |Sta|P|F|C|A|D|M| Detect Mult | Length |
+// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+// | My Discriminator |
+// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+// | Your Discriminator |
+// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+// | Desired Min TX Interval |
+// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+// | Required Min RX Interval |
+// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+// | Required Min Echo RX Interval |
+// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+//
+// An optional Authentication Section MAY be present:
+//
+// 0 1 2 3
+// 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+// | Auth Type | Auth Len | Authentication Data... |
+// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+//
+//
+// Simple Password Authentication Section Format
+// ---------------------------------------------
+// 0 1 2 3
+// 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+// | Auth Type | Auth Len | Auth Key ID | Password... |
+// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+// | ... |
+// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+//
+//
+// Keyed MD5 and Meticulous Keyed MD5 Authentication Section Format
+// ----------------------------------------------------------------
+// 0 1 2 3
+// 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+// | Auth Type | Auth Len | Auth Key ID | Reserved |
+// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+// | Sequence Number |
+// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+// | Auth Key/Digest... |
+// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+// | ... |
+// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+//
+//
+// Keyed SHA1 and Meticulous Keyed SHA1 Authentication Section Format
+// ------------------------------------------------------------------
+// 0 1 2 3
+// 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+// | Auth Type | Auth Len | Auth Key ID | Reserved |
+// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+// | Sequence Number |
+// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+// | Auth Key/Hash... |
+// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+// | ... |
+// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+//
+// From https://tools.ietf.org/rfc/rfc5880.txt
+const bfdMinimumRecordSizeInBytes int = 24
+
+// BFDVersion represents the version as decoded from the BFD control message
+type BFDVersion uint8
+
+// BFDDiagnostic represents diagnostic infomation about a BFD session
+type BFDDiagnostic uint8
+
+// constants that define BFDDiagnostic flags
+const (
+ BFDDiagnosticNone BFDDiagnostic = 0 // No Diagnostic
+ BFDDiagnosticTimeExpired BFDDiagnostic = 1 // Control Detection Time Expired
+ BFDDiagnosticEchoFailed BFDDiagnostic = 2 // Echo Function Failed
+ BFDDiagnosticNeighborSignalDown BFDDiagnostic = 3 // Neighbor Signaled Session Down
+ BFDDiagnosticForwardPlaneReset BFDDiagnostic = 4 // Forwarding Plane Reset
+ BFDDiagnosticPathDown BFDDiagnostic = 5 // Path Down
+ BFDDiagnosticConcatPathDown BFDDiagnostic = 6 // Concatenated Path Down
+ BFDDiagnosticAdminDown BFDDiagnostic = 7 // Administratively Down
+ BFDDiagnosticRevConcatPathDown BFDDiagnostic = 8 // Reverse Concatenated Path Dow
+)
+
+// String returns a string version of BFDDiagnostic
+func (bd BFDDiagnostic) String() string {
+ switch bd {
+ default:
+ return "Unknown"
+ case BFDDiagnosticNone:
+ return "None"
+ case BFDDiagnosticTimeExpired:
+ return "Control Detection Time Expired"
+ case BFDDiagnosticEchoFailed:
+ return "Echo Function Failed"
+ case BFDDiagnosticNeighborSignalDown:
+ return "Neighbor Signaled Session Down"
+ case BFDDiagnosticForwardPlaneReset:
+ return "Forwarding Plane Reset"
+ case BFDDiagnosticPathDown:
+ return "Path Down"
+ case BFDDiagnosticConcatPathDown:
+ return "Concatenated Path Down"
+ case BFDDiagnosticAdminDown:
+ return "Administratively Down"
+ case BFDDiagnosticRevConcatPathDown:
+ return "Reverse Concatenated Path Down"
+ }
+}
+
+// BFDState represents the state of a BFD session
+type BFDState uint8
+
+// constants that define BFDState
+const (
+ BFDStateAdminDown BFDState = 0
+ BFDStateDown BFDState = 1
+ BFDStateInit BFDState = 2
+ BFDStateUp BFDState = 3
+)
+
+// String returns a string version of BFDState
+func (s BFDState) String() string {
+ switch s {
+ default:
+ return "Unknown"
+ case BFDStateAdminDown:
+ return "Admin Down"
+ case BFDStateDown:
+ return "Down"
+ case BFDStateInit:
+ return "Init"
+ case BFDStateUp:
+ return "Up"
+ }
+}
+
+// BFDDetectMultiplier represents the negotiated transmit interval,
+// multiplied by this value, provides the Detection Time for the
+// receiving system in Asynchronous mode.
+type BFDDetectMultiplier uint8
+
+// BFDDiscriminator is a unique, nonzero discriminator value used
+// to demultiplex multiple BFD sessions between the same pair of systems.
+type BFDDiscriminator uint32
+
+// BFDTimeInterval represents a time interval in microseconds
+type BFDTimeInterval uint32
+
+// BFDAuthType represents the authentication used in the BFD session
+type BFDAuthType uint8
+
+// constants that define the BFDAuthType
+const (
+ BFDAuthTypeNone BFDAuthType = 0 // No Auth
+ BFDAuthTypePassword BFDAuthType = 1 // Simple Password
+ BFDAuthTypeKeyedMD5 BFDAuthType = 2 // Keyed MD5
+ BFDAuthTypeMeticulousKeyedMD5 BFDAuthType = 3 // Meticulous Keyed MD5
+ BFDAuthTypeKeyedSHA1 BFDAuthType = 4 // Keyed SHA1
+ BFDAuthTypeMeticulousKeyedSHA1 BFDAuthType = 5 // Meticulous Keyed SHA1
+)
+
+// String returns a string version of BFDAuthType
+func (at BFDAuthType) String() string {
+ switch at {
+ default:
+ return "Unknown"
+ case BFDAuthTypeNone:
+ return "No Authentication"
+ case BFDAuthTypePassword:
+ return "Simple Password"
+ case BFDAuthTypeKeyedMD5:
+ return "Keyed MD5"
+ case BFDAuthTypeMeticulousKeyedMD5:
+ return "Meticulous Keyed MD5"
+ case BFDAuthTypeKeyedSHA1:
+ return "Keyed SHA1"
+ case BFDAuthTypeMeticulousKeyedSHA1:
+ return "Meticulous Keyed SHA1"
+ }
+}
+
+// BFDAuthKeyID represents the authentication key ID in use for
+// this packet. This allows multiple keys to be active simultaneously.
+type BFDAuthKeyID uint8
+
+// BFDAuthSequenceNumber represents the sequence number for this packet.
+// For Keyed Authentication, this value is incremented occasionally. For
+// Meticulous Keyed Authentication, this value is incremented for each
+// successive packet transmitted for a session. This provides protection
+// against replay attacks.
+type BFDAuthSequenceNumber uint32
+
+// BFDAuthData represents the authentication key or digest
+type BFDAuthData []byte
+
+// BFDAuthHeader represents authentication data used in the BFD session
+type BFDAuthHeader struct {
+ AuthType BFDAuthType
+ KeyID BFDAuthKeyID
+ SequenceNumber BFDAuthSequenceNumber
+ Data BFDAuthData
+}
+
+// Length returns the data length of the BFDAuthHeader based on the
+// authentication type
+func (h *BFDAuthHeader) Length() int {
+ switch h.AuthType {
+ case BFDAuthTypePassword:
+ return 3 + len(h.Data)
+ case BFDAuthTypeKeyedMD5, BFDAuthTypeMeticulousKeyedMD5:
+ return 8 + len(h.Data)
+ case BFDAuthTypeKeyedSHA1, BFDAuthTypeMeticulousKeyedSHA1:
+ return 8 + len(h.Data)
+ default:
+ return 0
+ }
+}
+
+// BFD represents a BFD control message packet whose payload contains
+// the control information required to for a BFD session.
+//
+// References
+// ----------
+//
+// Wikipedia's BFD entry:
+// https://en.wikipedia.org/wiki/Bidirectional_Forwarding_Detection
+// This is the best place to get an overview of BFD.
+//
+// RFC 5880 "Bidirectional Forwarding Detection (BFD)" (2010)
+// https://tools.ietf.org/html/rfc5880
+// This is the original BFD specification.
+//
+// RFC 5881 "Bidirectional Forwarding Detection (BFD) for IPv4 and IPv6 (Single Hop)" (2010)
+// https://tools.ietf.org/html/rfc5881
+// Describes the use of the Bidirectional Forwarding Detection (BFD)
+// protocol over IPv4 and IPv6 for single IP hops.
+type BFD struct {
+ BaseLayer // Stores the packet bytes and payload bytes.
+
+ Version BFDVersion // Version of the BFD protocol.
+ Diagnostic BFDDiagnostic // Diagnostic code for last state change
+ State BFDState // Current state
+ Poll bool // Requesting verification
+ Final bool // Responding to a received BFD Control packet that had the Poll (P) bit set.
+ ControlPlaneIndependent bool // BFD implementation does not share fate with its control plane
+ AuthPresent bool // Authentication Section is present and the session is to be authenticated
+ Demand bool // Demand mode is active
+ Multipoint bool // For future point-to-multipoint extensions. Must always be zero
+ DetectMultiplier BFDDetectMultiplier // Detection time multiplier
+ MyDiscriminator BFDDiscriminator // A unique, nonzero discriminator value
+ YourDiscriminator BFDDiscriminator // discriminator received from the remote system.
+ DesiredMinTxInterval BFDTimeInterval // Minimum interval, in microseconds, the local system would like to use when transmitting BFD Control packets
+ RequiredMinRxInterval BFDTimeInterval // Minimum interval, in microseconds, between received BFD Control packets that this system is capable of supporting
+ RequiredMinEchoRxInterval BFDTimeInterval // Minimum interval, in microseconds, between received BFD Echo packets that this system is capable of supporting
+ AuthHeader *BFDAuthHeader // Authentication data, variable length.
+}
+
+// Length returns the data length of a BFD Control message which
+// changes based on the presence and type of authentication
+// contained in the message
+func (d *BFD) Length() int {
+ if d.AuthPresent && (d.AuthHeader != nil) {
+ return bfdMinimumRecordSizeInBytes + d.AuthHeader.Length()
+ }
+
+ return bfdMinimumRecordSizeInBytes
+}
+
+// LayerType returns the layer type of the BFD object, which is LayerTypeBFD.
+func (d *BFD) LayerType() gopacket.LayerType {
+ return LayerTypeBFD
+}
+
+// decodeBFD analyses a byte slice and attempts to decode it as a BFD
+// control packet
+//
+// If it succeeds, it loads p with information about the packet and returns nil.
+// If it fails, it returns an error (non nil).
+//
+// This function is employed in layertypes.go to register the BFD layer.
+func decodeBFD(data []byte, p gopacket.PacketBuilder) error {
+
+ // Attempt to decode the byte slice.
+ d := &BFD{}
+ err := d.DecodeFromBytes(data, p)
+ if err != nil {
+ return err
+ }
+
+ // If the decoding worked, add the layer to the packet and set it
+ // as the application layer too, if there isn't already one.
+ p.AddLayer(d)
+ p.SetApplicationLayer(d)
+
+ return nil
+}
+
+// DecodeFromBytes analyses a byte slice and attempts to decode it as a BFD
+// control packet.
+//
+// Upon succeeds, it loads the BFD object with information about the packet
+// and returns nil.
+// Upon failure, it returns an error (non nil).
+func (d *BFD) DecodeFromBytes(data []byte, df gopacket.DecodeFeedback) error {
+
+ // If the data block is too short to be a BFD record, then return an error.
+ if len(data) < bfdMinimumRecordSizeInBytes {
+ df.SetTruncated()
+ return errors.New("BFD packet too short")
+ }
+
+ pLen := uint8(data[3])
+ if len(data) != int(pLen) {
+ return errors.New("BFD packet length does not match")
+ }
+
+ // BFD type embeds type BaseLayer which contains two fields:
+ // Contents is supposed to contain the bytes of the data at this level.
+ // Payload is supposed to contain the payload of this level.
+ // Here we set the baselayer to be the bytes of the BFD record.
+ d.BaseLayer = BaseLayer{Contents: data[:len(data)]}
+
+ // Extract the fields from the block of bytes.
+ // To make sense of this, refer to the packet diagram
+ // above and the section on endian conventions.
+
+ // The first few fields are all packed into the first 32 bits. Unpack them.
+ d.Version = BFDVersion(((data[0] & 0xE0) >> 5))
+ d.Diagnostic = BFDDiagnostic(data[0] & 0x1F)
+ data = data[1:]
+
+ d.State = BFDState((data[0] & 0xC0) >> 6)
+ d.Poll = data[0]&0x20 != 0
+ d.Final = data[0]&0x10 != 0
+ d.ControlPlaneIndependent = data[0]&0x08 != 0
+ d.AuthPresent = data[0]&0x04 != 0
+ d.Demand = data[0]&0x02 != 0
+ d.Multipoint = data[0]&0x01 != 0
+ data = data[1:]
+
+ data, d.DetectMultiplier = data[1:], BFDDetectMultiplier(data[0])
+ data, _ = data[1:], uint8(data[0]) // Consume length
+
+ // The remaining fields can just be copied in big endian order.
+ data, d.MyDiscriminator = data[4:], BFDDiscriminator(binary.BigEndian.Uint32(data[:4]))
+ data, d.YourDiscriminator = data[4:], BFDDiscriminator(binary.BigEndian.Uint32(data[:4]))
+ data, d.DesiredMinTxInterval = data[4:], BFDTimeInterval(binary.BigEndian.Uint32(data[:4]))
+ data, d.RequiredMinRxInterval = data[4:], BFDTimeInterval(binary.BigEndian.Uint32(data[:4]))
+ data, d.RequiredMinEchoRxInterval = data[4:], BFDTimeInterval(binary.BigEndian.Uint32(data[:4]))
+
+ if d.AuthPresent && (len(data) > 2) {
+ d.AuthHeader = &BFDAuthHeader{}
+ data, d.AuthHeader.AuthType = data[1:], BFDAuthType(data[0])
+ data, _ = data[1:], uint8(data[0]) // Consume length
+ data, d.AuthHeader.KeyID = data[1:], BFDAuthKeyID(data[0])
+
+ switch d.AuthHeader.AuthType {
+ case BFDAuthTypePassword:
+ d.AuthHeader.Data = BFDAuthData(data)
+ case BFDAuthTypeKeyedMD5, BFDAuthTypeMeticulousKeyedMD5:
+ // Skipped reserved byte
+ data, d.AuthHeader.SequenceNumber = data[5:], BFDAuthSequenceNumber(binary.BigEndian.Uint32(data[1:5]))
+ d.AuthHeader.Data = BFDAuthData(data)
+ case BFDAuthTypeKeyedSHA1, BFDAuthTypeMeticulousKeyedSHA1:
+ // Skipped reserved byte
+ data, d.AuthHeader.SequenceNumber = data[5:], BFDAuthSequenceNumber(binary.BigEndian.Uint32(data[1:5]))
+ d.AuthHeader.Data = BFDAuthData(data)
+ }
+ }
+
+ return nil
+}
+
+// SerializeTo writes the serialized form of this layer into the
+// SerializationBuffer, implementing gopacket.SerializableLayer.
+// See the docs for gopacket.SerializableLayer for more info.
+func (d *BFD) SerializeTo(b gopacket.SerializeBuffer, opts gopacket.SerializeOptions) error {
+ data, err := b.PrependBytes(bfdMinimumRecordSizeInBytes)
+ if err != nil {
+ return err
+ }
+
+ // Pack the first few fields into the first 32 bits.
+ data[0] = byte(byte(d.Version<<5) | byte(d.Diagnostic))
+ h := uint8(0)
+ h |= (uint8(d.State) << 6)
+ h |= (uint8(bool2uint8(d.Poll)) << 5)
+ h |= (uint8(bool2uint8(d.Final)) << 4)
+ h |= (uint8(bool2uint8(d.ControlPlaneIndependent)) << 3)
+ h |= (uint8(bool2uint8(d.AuthPresent)) << 2)
+ h |= (uint8(bool2uint8(d.Demand)) << 1)
+ h |= uint8(bool2uint8(d.Multipoint))
+ data[1] = byte(h)
+ data[2] = byte(d.DetectMultiplier)
+ data[3] = byte(d.Length())
+
+ // The remaining fields can just be copied in big endian order.
+ binary.BigEndian.PutUint32(data[4:], uint32(d.MyDiscriminator))
+ binary.BigEndian.PutUint32(data[8:], uint32(d.YourDiscriminator))
+ binary.BigEndian.PutUint32(data[12:], uint32(d.DesiredMinTxInterval))
+ binary.BigEndian.PutUint32(data[16:], uint32(d.RequiredMinRxInterval))
+ binary.BigEndian.PutUint32(data[20:], uint32(d.RequiredMinEchoRxInterval))
+
+ if d.AuthPresent && (d.AuthHeader != nil) {
+ auth, err := b.AppendBytes(int(d.AuthHeader.Length()))
+ if err != nil {
+ return err
+ }
+
+ auth[0] = byte(d.AuthHeader.AuthType)
+ auth[1] = byte(d.AuthHeader.Length())
+ auth[2] = byte(d.AuthHeader.KeyID)
+
+ switch d.AuthHeader.AuthType {
+ case BFDAuthTypePassword:
+ copy(auth[3:], d.AuthHeader.Data)
+ case BFDAuthTypeKeyedMD5, BFDAuthTypeMeticulousKeyedMD5:
+ auth[3] = byte(0)
+ binary.BigEndian.PutUint32(auth[4:], uint32(d.AuthHeader.SequenceNumber))
+ copy(auth[8:], d.AuthHeader.Data)
+ case BFDAuthTypeKeyedSHA1, BFDAuthTypeMeticulousKeyedSHA1:
+ auth[3] = byte(0)
+ binary.BigEndian.PutUint32(auth[4:], uint32(d.AuthHeader.SequenceNumber))
+ copy(auth[8:], d.AuthHeader.Data)
+ }
+ }
+
+ return nil
+}
+
+// CanDecode returns a set of layers that BFD objects can decode.
+// As BFD objects can only decide the BFD layer, we can return just that layer.
+// Apparently a single layer type implements LayerClass.
+func (d *BFD) CanDecode() gopacket.LayerClass {
+ return LayerTypeBFD
+}
+
+// NextLayerType specifies the next layer that GoPacket should attempt to
+// analyse after this (BFD) layer. As BFD packets do not contain any payload
+// bytes, there are no further layers to analyse.
+func (d *BFD) NextLayerType() gopacket.LayerType {
+ return gopacket.LayerTypeZero
+}
+
+// Payload returns an empty byte slice as BFD packets do not carry a payload
+func (d *BFD) Payload() []byte {
+ return nil
+}
+
+// bool2uint8 converts a bool to uint8
+func bool2uint8(b bool) uint8 {
+ if b {
+ return 1
+ }
+ return 0
+}