VOL-4019: Initial commit with grpc nbi, sbi, etcd, kafka and hw management rpcs.
Change-Id: I78feaf7da284028fc61f42c5e0c5f56e72fe9e78
diff --git a/vendor/github.com/pierrec/lz4/block.go b/vendor/github.com/pierrec/lz4/block.go
new file mode 100644
index 0000000..5755cda
--- /dev/null
+++ b/vendor/github.com/pierrec/lz4/block.go
@@ -0,0 +1,387 @@
+package lz4
+
+import (
+ "encoding/binary"
+ "fmt"
+ "math/bits"
+)
+
+// blockHash hashes the lower 6 bytes into a value < htSize.
+func blockHash(x uint64) uint32 {
+ const prime6bytes = 227718039650203
+ return uint32(((x << (64 - 48)) * prime6bytes) >> (64 - hashLog))
+}
+
+// CompressBlockBound returns the maximum size of a given buffer of size n, when not compressible.
+func CompressBlockBound(n int) int {
+ return n + n/255 + 16
+}
+
+// UncompressBlock uncompresses the source buffer into the destination one,
+// and returns the uncompressed size.
+//
+// The destination buffer must be sized appropriately.
+//
+// An error is returned if the source data is invalid or the destination buffer is too small.
+func UncompressBlock(src, dst []byte) (int, error) {
+ if len(src) == 0 {
+ return 0, nil
+ }
+ if di := decodeBlock(dst, src); di >= 0 {
+ return di, nil
+ }
+ return 0, ErrInvalidSourceShortBuffer
+}
+
+// CompressBlock compresses the source buffer into the destination one.
+// This is the fast version of LZ4 compression and also the default one.
+// The size of hashTable must be at least 64Kb.
+//
+// The size of the compressed data is returned. If it is 0 and no error, then the data is incompressible.
+//
+// An error is returned if the destination buffer is too small.
+func CompressBlock(src, dst []byte, hashTable []int) (di int, err error) {
+ defer recoverBlock(&err)
+
+ // adaptSkipLog sets how quickly the compressor begins skipping blocks when data is incompressible.
+ // This significantly speeds up incompressible data and usually has very small impact on compresssion.
+ // bytes to skip = 1 + (bytes since last match >> adaptSkipLog)
+ const adaptSkipLog = 7
+ sn, dn := len(src)-mfLimit, len(dst)
+ if sn <= 0 || dn == 0 {
+ return 0, nil
+ }
+ if len(hashTable) < htSize {
+ return 0, fmt.Errorf("hash table too small, should be at least %d in size", htSize)
+ }
+ // Prove to the compiler the table has at least htSize elements.
+ // The compiler can see that "uint32() >> hashShift" cannot be out of bounds.
+ hashTable = hashTable[:htSize]
+
+ // si: Current position of the search.
+ // anchor: Position of the current literals.
+ var si, anchor int
+
+ // Fast scan strategy: the hash table only stores the last 4 bytes sequences.
+ for si < sn {
+ // Hash the next 6 bytes (sequence)...
+ match := binary.LittleEndian.Uint64(src[si:])
+ h := blockHash(match)
+ h2 := blockHash(match >> 8)
+
+ // We check a match at s, s+1 and s+2 and pick the first one we get.
+ // Checking 3 only requires us to load the source one.
+ ref := hashTable[h]
+ ref2 := hashTable[h2]
+ hashTable[h] = si
+ hashTable[h2] = si + 1
+ offset := si - ref
+
+ // If offset <= 0 we got an old entry in the hash table.
+ if offset <= 0 || offset >= winSize || // Out of window.
+ uint32(match) != binary.LittleEndian.Uint32(src[ref:]) { // Hash collision on different matches.
+ // No match. Start calculating another hash.
+ // The processor can usually do this out-of-order.
+ h = blockHash(match >> 16)
+ ref = hashTable[h]
+
+ // Check the second match at si+1
+ si += 1
+ offset = si - ref2
+
+ if offset <= 0 || offset >= winSize ||
+ uint32(match>>8) != binary.LittleEndian.Uint32(src[ref2:]) {
+ // No match. Check the third match at si+2
+ si += 1
+ offset = si - ref
+ hashTable[h] = si
+
+ if offset <= 0 || offset >= winSize ||
+ uint32(match>>16) != binary.LittleEndian.Uint32(src[ref:]) {
+ // Skip one extra byte (at si+3) before we check 3 matches again.
+ si += 2 + (si-anchor)>>adaptSkipLog
+ continue
+ }
+ }
+ }
+
+ // Match found.
+ lLen := si - anchor // Literal length.
+ // We already matched 4 bytes.
+ mLen := 4
+
+ // Extend backwards if we can, reducing literals.
+ tOff := si - offset - 1
+ for lLen > 0 && tOff >= 0 && src[si-1] == src[tOff] {
+ si--
+ tOff--
+ lLen--
+ mLen++
+ }
+
+ // Add the match length, so we continue search at the end.
+ // Use mLen to store the offset base.
+ si, mLen = si+mLen, si+minMatch
+
+ // Find the longest match by looking by batches of 8 bytes.
+ for si < sn {
+ x := binary.LittleEndian.Uint64(src[si:]) ^ binary.LittleEndian.Uint64(src[si-offset:])
+ if x == 0 {
+ si += 8
+ } else {
+ // Stop is first non-zero byte.
+ si += bits.TrailingZeros64(x) >> 3
+ break
+ }
+ }
+
+ mLen = si - mLen
+ if mLen < 0xF {
+ dst[di] = byte(mLen)
+ } else {
+ dst[di] = 0xF
+ }
+
+ // Encode literals length.
+ if lLen < 0xF {
+ dst[di] |= byte(lLen << 4)
+ } else {
+ dst[di] |= 0xF0
+ di++
+ l := lLen - 0xF
+ for ; l >= 0xFF; l -= 0xFF {
+ dst[di] = 0xFF
+ di++
+ }
+ dst[di] = byte(l)
+ }
+ di++
+
+ // Literals.
+ copy(dst[di:di+lLen], src[anchor:anchor+lLen])
+ di += lLen + 2
+ anchor = si
+
+ // Encode offset.
+ _ = dst[di] // Bound check elimination.
+ dst[di-2], dst[di-1] = byte(offset), byte(offset>>8)
+
+ // Encode match length part 2.
+ if mLen >= 0xF {
+ for mLen -= 0xF; mLen >= 0xFF; mLen -= 0xFF {
+ dst[di] = 0xFF
+ di++
+ }
+ dst[di] = byte(mLen)
+ di++
+ }
+ // Check if we can load next values.
+ if si >= sn {
+ break
+ }
+ // Hash match end-2
+ h = blockHash(binary.LittleEndian.Uint64(src[si-2:]))
+ hashTable[h] = si - 2
+ }
+
+ if anchor == 0 {
+ // Incompressible.
+ return 0, nil
+ }
+
+ // Last literals.
+ lLen := len(src) - anchor
+ if lLen < 0xF {
+ dst[di] = byte(lLen << 4)
+ } else {
+ dst[di] = 0xF0
+ di++
+ for lLen -= 0xF; lLen >= 0xFF; lLen -= 0xFF {
+ dst[di] = 0xFF
+ di++
+ }
+ dst[di] = byte(lLen)
+ }
+ di++
+
+ // Write the last literals.
+ if di >= anchor {
+ // Incompressible.
+ return 0, nil
+ }
+ di += copy(dst[di:di+len(src)-anchor], src[anchor:])
+ return di, nil
+}
+
+// blockHash hashes 4 bytes into a value < winSize.
+func blockHashHC(x uint32) uint32 {
+ const hasher uint32 = 2654435761 // Knuth multiplicative hash.
+ return x * hasher >> (32 - winSizeLog)
+}
+
+// CompressBlockHC compresses the source buffer src into the destination dst
+// with max search depth (use 0 or negative value for no max).
+//
+// CompressBlockHC compression ratio is better than CompressBlock but it is also slower.
+//
+// The size of the compressed data is returned. If it is 0 and no error, then the data is not compressible.
+//
+// An error is returned if the destination buffer is too small.
+func CompressBlockHC(src, dst []byte, depth int) (di int, err error) {
+ defer recoverBlock(&err)
+
+ // adaptSkipLog sets how quickly the compressor begins skipping blocks when data is incompressible.
+ // This significantly speeds up incompressible data and usually has very small impact on compresssion.
+ // bytes to skip = 1 + (bytes since last match >> adaptSkipLog)
+ const adaptSkipLog = 7
+
+ sn, dn := len(src)-mfLimit, len(dst)
+ if sn <= 0 || dn == 0 {
+ return 0, nil
+ }
+ var si int
+
+ // hashTable: stores the last position found for a given hash
+ // chainTable: stores previous positions for a given hash
+ var hashTable, chainTable [winSize]int
+
+ if depth <= 0 {
+ depth = winSize
+ }
+
+ anchor := si
+ for si < sn {
+ // Hash the next 4 bytes (sequence).
+ match := binary.LittleEndian.Uint32(src[si:])
+ h := blockHashHC(match)
+
+ // Follow the chain until out of window and give the longest match.
+ mLen := 0
+ offset := 0
+ for next, try := hashTable[h], depth; try > 0 && next > 0 && si-next < winSize; next = chainTable[next&winMask] {
+ // The first (mLen==0) or next byte (mLen>=minMatch) at current match length
+ // must match to improve on the match length.
+ if src[next+mLen] != src[si+mLen] {
+ continue
+ }
+ ml := 0
+ // Compare the current position with a previous with the same hash.
+ for ml < sn-si {
+ x := binary.LittleEndian.Uint64(src[next+ml:]) ^ binary.LittleEndian.Uint64(src[si+ml:])
+ if x == 0 {
+ ml += 8
+ } else {
+ // Stop is first non-zero byte.
+ ml += bits.TrailingZeros64(x) >> 3
+ break
+ }
+ }
+ if ml < minMatch || ml <= mLen {
+ // Match too small (<minMath) or smaller than the current match.
+ continue
+ }
+ // Found a longer match, keep its position and length.
+ mLen = ml
+ offset = si - next
+ // Try another previous position with the same hash.
+ try--
+ }
+ chainTable[si&winMask] = hashTable[h]
+ hashTable[h] = si
+
+ // No match found.
+ if mLen == 0 {
+ si += 1 + (si-anchor)>>adaptSkipLog
+ continue
+ }
+
+ // Match found.
+ // Update hash/chain tables with overlapping bytes:
+ // si already hashed, add everything from si+1 up to the match length.
+ winStart := si + 1
+ if ws := si + mLen - winSize; ws > winStart {
+ winStart = ws
+ }
+ for si, ml := winStart, si+mLen; si < ml; {
+ match >>= 8
+ match |= uint32(src[si+3]) << 24
+ h := blockHashHC(match)
+ chainTable[si&winMask] = hashTable[h]
+ hashTable[h] = si
+ si++
+ }
+
+ lLen := si - anchor
+ si += mLen
+ mLen -= minMatch // Match length does not include minMatch.
+
+ if mLen < 0xF {
+ dst[di] = byte(mLen)
+ } else {
+ dst[di] = 0xF
+ }
+
+ // Encode literals length.
+ if lLen < 0xF {
+ dst[di] |= byte(lLen << 4)
+ } else {
+ dst[di] |= 0xF0
+ di++
+ l := lLen - 0xF
+ for ; l >= 0xFF; l -= 0xFF {
+ dst[di] = 0xFF
+ di++
+ }
+ dst[di] = byte(l)
+ }
+ di++
+
+ // Literals.
+ copy(dst[di:di+lLen], src[anchor:anchor+lLen])
+ di += lLen
+ anchor = si
+
+ // Encode offset.
+ di += 2
+ dst[di-2], dst[di-1] = byte(offset), byte(offset>>8)
+
+ // Encode match length part 2.
+ if mLen >= 0xF {
+ for mLen -= 0xF; mLen >= 0xFF; mLen -= 0xFF {
+ dst[di] = 0xFF
+ di++
+ }
+ dst[di] = byte(mLen)
+ di++
+ }
+ }
+
+ if anchor == 0 {
+ // Incompressible.
+ return 0, nil
+ }
+
+ // Last literals.
+ lLen := len(src) - anchor
+ if lLen < 0xF {
+ dst[di] = byte(lLen << 4)
+ } else {
+ dst[di] = 0xF0
+ di++
+ lLen -= 0xF
+ for ; lLen >= 0xFF; lLen -= 0xFF {
+ dst[di] = 0xFF
+ di++
+ }
+ dst[di] = byte(lLen)
+ }
+ di++
+
+ // Write the last literals.
+ if di >= anchor {
+ // Incompressible.
+ return 0, nil
+ }
+ di += copy(dst[di:di+len(src)-anchor], src[anchor:])
+ return di, nil
+}