Gitiles
Code Review Sign In
gerrit.opencord.org / openolt-scale-tester

This is used for scale testing of OpenOLT Agent + BAL (or other underlying platform)

Clone this repo:

Branches

Tags

  1. 390f12f VOL-4217: Update to latest version of protos and voltha-lib-go for by Girish Gowdra · 3 years, 6 months ago master v2.1.0
  2. 5d7d644 VOL-3419: Replicate voltha flows in openolt agent by Girish Gowdra · 4 years, 4 months ago v2.0.0
  3. aeceb84 VOL-3431: Following enhancement/changes are done in this patch by Girish Gowdra · 4 years, 4 months ago v1.1.0
  4. c3d08cd Remove redundant "go build -mod=vendor" from docker build by Girish Gowdra · 4 years, 8 months ago
  5. 5544479 Fix docker build job. Use 'go' command inside the Dockerfile. by Girish Gowdra · 4 years, 9 months ago v1.0.4

OpenOLT Scale Tester

This is used for scale testing of OpenOLT Agent + BAL (or other underlying platform)

Design

The proposed design is here https://docs.google.com/document/d/1hQxbA8jvG1BEHeeLkM5L3sYrvgJUX7z2Tk7j1sPdd1s

How to build

make build

How to run

Make sure openolt-agent and dev_mgmt_daemon are running. Then run the below command from openolt-scale-tester folder.

DOCKER_HOST_IP=<your-host-ip-here> OPENOLT_AGENT_IP_ADDRESS=<olt-ip-address-here> TAG=<docker-tag-here> docker-compose -f compose/openolt-scale-tester.yml up -d

openolt-agent settings for testing scale

Compile openolt-agent application with FLOW_CHECKER compile time flag disabled and SCALE_AND_PERF flag enabled in CPPFLAGS under agent/Makefile.in

How to add new workflows

Lets say your workflow name is XYZ, and the techprofile IDs needed by your workflow is 64 (there could be more than one techprofiles too). Create XYZ-64.json file with your techprofile in tech_profiles folder. Edit the compose/openolt-scale-tester.yml file to reflect your workflow name, i.e., XYZ for parameter --workflow_name.

Create xyz_workflow.go (see sample att_workflow.go) which complies to WorkFlow interface defined in workflow_manager.go file and complete the implementation.

More than one techprofiles for your workflow

If there are more than one techprofiles needed by your workflow, then you need to create as many techprofiles with appropriate name as described above. Edit the compose/openolt-scale-tester.yml file, parameter --tp_ids with comma separated techprofile IDs.

Configuration

Below parameters are currently configurable from compose/openolt-scale-tester.yml file.

openolt_agent_ip_address [default: 10.90.0.114]
openolt_agent_port [default: 9191]
openolt_agent_nni_intf_id [default: 0]
num_of_onu [default: 128]
subscribers_per_onu [default: 1]
workflow_name [default: ATT]
time_interval_between_subs [default: 5]
kv_store_host[default: 192.168.1.11]
kv_store_port [default: 2379]
tp_ids [ default: 64]

Known Limitations and Issues

The following are known issues and limitations with the openolt-scale-tester tool.

  • This tool configures fake ONUs which does not really exist on the PON tree. Hence all the BAL resources (if you are using a Broadcom BAL integrated agent) it continues to remain in CONFIGURED state and never move to ACTIVE. The goal is to test the scale-limits on the number of resources we can configure and see if it meets the operator requirements.
  • There are timeouts seen in the openolt-agent logs during ITUPON-Alloc object creation (if you are using Broadcom BAL3.x integrated openolt-agent). Right after ITUPON-Alloc object creation, the BAL tries to sync over PLOAM channel with ONU. But, since the ONUs we configure are fake, the PLOAM channel does not exist and ITUPON-Alloc object cannot move to ACTIVE state and times-out. Since the ITUPON-Alloc object is CONFIGURED and that serves our purpose, you may ignore this error.