diff --git a/BUILDING.md b/BUILDING.md
index d8599c6..0f11167 100644
--- a/BUILDING.md
+++ b/BUILDING.md
@@ -8,16 +8,23 @@
 
 The following proprietary source code is required to build the OpenOLT agent.
 
-* `SW-BCM686OLT_<BAL_VER>.tgz` - Broadcom BAL source and Maple SDK
+* `SW-BCM686OLT_<BAL_VER>.tgz` - Broadcom BAL source and Maple/Aspen SDK
 * `sdk-all-<SDK_VER>.tar.gz` - Broadcom Qumran SDK
 * `ACCTON_BAL_<BAL_VER>-<ACCTON_VER>.patch` - Accton/Edgecore's patch
+* `PHOENIX_BAL_<BAL_VER>_<PHOENIX_VER>.patch` - Phoenix/Radisys patch
 
-The versions currently supported by the OpenOLT agent are:
+The versions currently supported by the OpenOLT agent for Accton/Edgecore ASXvOLT16/ASGvOLT64 are:
 
 * `SW-BCM686OLT_3_4_9_6.tgz`
 * `sdk-all-6.5.13.tar.gz`
 * `ACCTON_BAL_3.4.9.6-V202012040101.patch`. This is downloadable from the common CSP CS00003233745.
 
+The versions currently supported by the OpenOLT agent for Phoenix/Radisys RLT-3200G are:
+
+* `SW-BCM686OLT_3_4_9_8.tgz`
+* `sdk-all-6.5.13.tar.gz`
+* `PHOENIX_BAL_3.4.9.8_V20210420.patch`. This is downloadable from the common CSP CS00003233745.
+
 > NOTE: the repository does not contain the above three source packages.  These
 > are needed to build the OpenOLT agent executable. Contact [Dave Baron at
 > Broadcom](mailto:dave.baron@broadcom.com) to access the source packages.
@@ -34,13 +41,13 @@
 
 **Software** :
 
-1. OpenOLT agent builds on *Debian GNU/Linux 8.11.1 (jessie)* . The ISO installer image is downloadble from [here](https://cdimage.debian.org/cdimage/archive/8.11.1/amd64/iso-cd/debian-8.11.1-amd64-netinst.iso)
+1. OpenOLT agent for Accton/Edgecore ASXvOLT16/ASGvOLT64 builds on *Debian GNU/Linux 8.11.1 (jessie)* and for Phoenix/Radisys RLT-3200G builds on *Debian GNU/Linux 9.13 (stretch)*. The *Debian 8.11.1 jessie* ISO installer image is downloadble from [here](https://cdimage.debian.org/cdimage/archive/8.11.1/amd64/iso-cd/debian-8.11.1-amd64-netinst.iso) and *Debian 9.13 stretch* ISO installer image is downloadable from [here](https://cdimage.debian.org/cdimage/archive/9.13.0/amd64/iso-cd/debian-9.13.0-amd64-netinst.iso).
 
 2. At least 4G of ram and 4G of swap -  compilation is memory intensive
 
 3. Essential tools for building packages
 
-Install the following packages
+Install the following packages for Accton/Edgecore ASXvOLT16/ASGvOLT64 based build
 
    `sudo apt-get update && sudo apt-get install -y git pkg-config build-essential autoconf libgflags-dev clang libc++-dev unzip libssl-dev gawk debhelper debhelper dh-systemd init-system-helpers curl cmake ccache g++-4.9 wget ca-certificates lcov libgoogle-glog-dev libpcap-dev`
 
@@ -51,6 +58,17 @@
 sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-4.9 20
 ```
 
+Install the following packages for Phoenix/Radisys RLT-3200G based build
+
+   `sudo apt-get update && sudo apt-get install -y git pkg-config build-essential autoconf libgflags-dev clang libc++-dev unzip libssl-dev gawk debhelper debhelper dh-systemd init-system-helpers curl cmake ccache g++ wget ca-certificates lcov libgoogle-glog-dev libpcap-dev libjansson-dev`
+
+Run the below commands to ensure that g++-6 and gcc-6 are default g++ and gcc compiler versions.
+
+```shell
+sudo update-alternatives --install /usr/bin/g++ g++ /usr/bin/g++-6 20
+sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-6 20
+```
+
 Follow the instructions [here](https://docs.docker.com/engine/install/debian/) to install `docker-ce`. It is not necessary to install `docker-ce-cli` and `containerd.io`.
 
 4. Install cmake version 3.5.1 or above.
@@ -112,10 +130,17 @@
 sudo make prefix=/usr/local install
 ```
 
-Note1: The build environment has been validated with only Jessie 8.11.1 64bit AMD64 OS only.
-Note2: Make sure you are using g++-4.9 as the default g++ compiler version on your build system. The grpc libraries and openolt agent code has to be compiled with this g++ version.
+**Edgecore ASXvOLT16/ASGvOLT64 build environment note** :
 
-## Build procedure
+1. The build environment has been validated with only Jessie 8.11.1 64bit AMD64 OS only.
+2. Make sure you are using g++-4.9 as the default g++ compiler version on your build system. The grpc libraries and openolt agent code has to be compiled with this g++ version.
+
+**Radisys RLT-3200G build environment note** :
+
+1. The build environment has been validated with only Stretch 9.13 64bit AMD64 OS only.
+2. Make sure you are using g++-6 as the default g++ compiler version on your build system. The grpc libraries and openolt agent code has to be compiled with this g++ version.
+
+## Openolt build procedure for Edgecore ASXvOLT16/ASGvOLT64
 
 Clone the `openolt` repository either from OpenCORD Gerrit:
 
@@ -225,7 +250,7 @@
 make OPENOLTDEVICE=asgvolt64
 ```
 
-## Cleanup
+## Edgecore ASXvOLT16/ASGvOLT64 build cleanup
 
 To cleanup the repository and start the build procedure again, run:
 
@@ -236,3 +261,85 @@
 # cleans up the agent objects, protos compiled artificats, openolt deb packages and bal sources
 make OPENOLTDEVICE=asfvolt16 distclean
 ```
+
+## Openolt build procedure for Radisys RLT-3200G
+
+Clone the `openolt` repository either from OpenCORD Gerrit:
+
+```shell
+git clone https://gerrit.opencord.org/openolt
+```
+
+Copy the Broadcom source and patch files to the openolt/agent/download directory:
+
+```shell
+cd <dir containing Broadcom source and patch files>
+cp PHOENIX_BAL_3.4.9.8_V20210420.patch SW-BCM686OLT_3_4_9_8.tgz sdk-all-6.5.13.tar.gz <cloned openolt repo path>/agent/download
+```
+
+Run the configure script to generate the appropriate Makefile scaffolding for
+the desired target:
+
+```shell
+cd openolt/agent
+./configure
+```
+
+Run *make*. This can take a while to complete the first time, since it builds
+ONL and the Broadcom SDKs. Following runs will be much faster, as they only
+build the OpenOLT agent source.
+
+```shell
+make OPENOLTDEVICE=phoenix
+```
+
+Note that the required ONL version `4.19` is built as part of the above build
+procedure and is available at path
+`build/onl/OpenNetworkLinux/RELEASE/stretch/amd64/ONL-onl-4.19_ONL-OS9_2021-03-30.0455-72b95a7_AMD64_INSTALLED_INSTALLER`.
+This ONL Installer should be used to flash the OS on the OLT.
+
+If you need to use a specific version of voltha-protos, then specify the git
+tag/branch corresponding to that specific version:
+
+```shell
+make OPENOLTDEVICE=phoenix OPENOLT_PROTO_VER=master
+```
+
+By default, the `OPENOLT_PROTO_VER` defaults to git tag *v4.0.15* of the
+[voltha-protos](https://gerrit.opencord.org/gitweb?p=voltha-protos.git;a=summary)
+repo.
+
+If the build process succeeds, libraries and executables will be created in the
+*openolt/agent/build* directory.
+
+Command to build debian package that will be installed on the OLT with default
+QSFP NNI port speed as 40g and SFP NNI port speed as 10g. NNI port speed configuration
+not included during inital make to reduce build time in case of different NNI port speed
+requirement.
+
+```shell
+make OPENOLTDEVICE=phoenix deb
+```
+
+Optionally, debian package can be built with one other NNI port speed option as below,
+
+* 40G QSFP NNI port change to 10Gbps speed (use Break-out cable)
+
+```shell
+make OPENOLTDEVICE=phoenix deb PORT_40G_SPEED=10g PORT_10G_SPEED=10g
+```
+
+If the build process succeeds, a `.deb` package will be created as well in the
+`openolt/agent/build` directory.
+
+## Radisys RLT-3200G build cleanup
+
+To cleanup the repository and start the build procedure again, run:
+
+```shell
+# cleans up the agent objects, protos compiled artificats and openolt deb packages
+make OPENOLTDEVICE=phoenix clean
+
+# cleans up the agent objects, protos compiled artificats, openolt deb packages and bal sources
+make OPENOLTDEVICE=phoenix distclean
+```
diff --git a/README.md b/README.md
index b5ac549..b6c0440 100644
--- a/README.md
+++ b/README.md
@@ -9,7 +9,8 @@
 
 OpenOLT agent uses Broadcom's BAL (Broadband Adaptation Layer) software for
 interfacing with the Maple/Qumran chipsets in OLTs such as the Edgecore/Accton
-ASXvOLT16.
+ASXvOLT16 and with Aspen/Qumran chipsets in OLTs such as the Radisys/Phoenix
+RLT-3200G.
 
 ```text
 
@@ -77,8 +78,9 @@
 dpkg -i openolt_<OPENOLTDEVICE>-2.6.0-<GIT Commit ID>.deb
 ```
 
-The ONL version required for BAL v3.4.9.6 is ONL `4.14.151-OpenNetworkLinux`. This
-will be built as part of build procedure described `Build OpenOLT` section.
+The ONL version required for BAL v3.4.9.6 is ONL `4.14.151-OpenNetworkLinux`. Radisys RLT-3200G
+requires BAL v3.4.9.8 and ONL version `4.19-OpenNetworkLinux`. This will be built as part of
+build procedure described in `Build OpenOLT` section.
 
 ## Run OpenOLT as a Linux service
 
@@ -125,32 +127,52 @@
 
 Perform `dev_mgmt_daemon` and change NNI port speed:
 
-* 100G port change to 40Gbps speed
+* 100G port change to 40Gbps speed (Accton/Edgecore ASXvOLT16)
+
 ```shell
 cd /broadcom
 ./dev_mgmt_daemon -d -pcie -port_100g_speed 40000
 ```
-* 100G port change to 10Gbps speed (use Break-out cable)
+
+* 100G port change to 10Gbps speed (use Break-out cable) (Accton/Edgecore ASXvOLT16)
+
 ```shell
 cd /broadcom
 ./dev_mgmt_daemon -d -pcie -port_100g_speed 10000 topology_config_file ./topology_config_16_ports.ini
 ```
+
 * 25G port change to 20Gbps speed (Accton/Edgecore ASGvOLT64)
+
 ```shell
 cd /broadcom
 ./dev_mgmt_daemon -d -pcie -port_25g_speed 20000
 ```
+
 * 25G port change to 10Gbps speed (Accton/Edgecore ASGvOLT64)
+
 ```shell
 cd /broadcom
 ./dev_mgmt_daemon -d -pcie -port_25g_speed 10000
 ```
+
 * 25G port change to 1Gbps speed (Accton/Edgecore ASGvOLT64)
+
 ```shell
 cd /broadcom
 ./dev_mgmt_daemon -d -pcie -port_25g_speed 1000
 ```
 
+* 40G QSFP NNI port change to 10Gbps speed and 10G SFP NNI port to default speed (Phoenix/Radisys RLT-3200G).  
+  If no speed specified QSFP port speed defaults to 40G and SFP port speed defaults to 10G
+
+```shell
+cd /opt/bcm68650/
+./svk_init.sh -clean
+./svk_init.sh -qsfp_speed=10g -sfp_speed=10g
+cd /broadcom
+./dev_mgmt_daemon -d -pcie
+```
+
 The `dev_mgmt_daemon` executable presents the CLI for Broadcom's BAL when run
 in the foreground which is useful for debugging.
 
@@ -182,8 +204,8 @@
 * Startup script named "start_inband_oltservices.sh" will be executed in
   background after ONL installation. Script execution could be watched in a
   log file located in /var/log/startup.log.
-* Follow the procedure specified below in Build OpenOLT section to build
-  integrated Inband ONL image.
+* Follow the procedure specified in Build OpenOLT section to build integrated
+  Inband ONL image.
 
 ### Connect from VOLTHA
 
@@ -266,7 +288,7 @@
 ## FAQ
 
 The information here may be specific to specific OLT and ONU hardware such as
-Edgecore ASFVOLT16 OLT and Broadcom based ONUs.
+Edgecore ASFVOLT16 OLT, Radisys RLT-3200G OLT and Broadcom based ONUs.
 
 ### How to change speed of ASFVOLT16 NNI interface?
 
@@ -313,7 +335,7 @@
 bs /b/e port/index=wan0
 ```
 
-### How to get access to MAPLE CLI on OLT box
+### How to get access to BAL CLI on OLT box
 
 To get access to the `BCM.0>` maple console, SSH into the OLT and then execute:
 
diff --git a/VERSION b/VERSION
index 73a1fbb..47b322c 100644
--- a/VERSION
+++ b/VERSION
@@ -1 +1 @@
-3.4.1-dev
+3.4.1
diff --git a/agent/Makefile.in b/agent/Makefile.in
index 50636d7..1813112 100644
--- a/agent/Makefile.in
+++ b/agent/Makefile.in
@@ -29,14 +29,15 @@
 BAL_MAJOR_VER = 3
 BAL_MINOR_VER = 4
 BAL_REV_A_VER = 9
-BAL_REV_B_VER = 6
-BAL_API_VER = $(BAL_MAJOR_VER).$(BAL_MINOR_VER).$(BAL_REV_A_VER).$(BAL_REV_B_VER)
+BAL_REV_B_VER != if [ "$(OPENOLTDEVICE)" = "phoenix" ]; then echo "8"; else echo "6"; fi
+BAL_API_REV_B_VER = 6
+BAL_API_VER = $(BAL_MAJOR_VER).$(BAL_MINOR_VER).$(BAL_REV_A_VER).$(BAL_API_REV_B_VER)
 BAL_VER = $(BAL_MAJOR_VER).$(BAL_MINOR_VER).$(BAL_REV_A_VER).$(BAL_REV_B_VER)
 SDK_VER = 6.5.13
-DEV_VER ?= 202012040101
+DEV_VER != if [ "$(OPENOLTDEVICE)" = "phoenix" ]; then echo "20210420"; else echo "202012040101"; fi
 #
 # Version of Open Network Linux (ONL).
-ONL_KERN_VER_MAJOR = 4.14
+ONL_KERN_VER_MAJOR != if [ "$(OPENOLTDEVICE)" = "phoenix" ]; then echo "4.19"; else echo "4.14"; fi
 
 # OpenOLT Proto version.
 # This specifies the GIT tag in https://github.com/opencord/voltha-protos
@@ -51,6 +52,8 @@
 # NNI ports speed setting
 PORT_100G_SPEED ?= 100000
 PORT_25G_SPEED ?= 25000
+PORT_40G_SPEED ?= 40g
+PORT_10G_SPEED ?= 10g
 
 # Build directory
 BUILD_DIR = build
@@ -87,7 +90,7 @@
 PCAPPLUSPLUS_INCLUDE_PATH=-I/usr/local/include/pcapplusplus/
 PCAPPLUSPLUS_LIB_PATH=-lPcap++ -lPacket++ -lCommon++
 
-CXX = @CXX@-4.9
+CXX != if [ "$(OPENOLTDEVICE)" = "phoenix" ]; then echo "@CXX@-6"; else echo "@CXX@-4.9"; fi
 CXXFLAGS += @CXXFLAGS@
 CXXFLAGS += $(shell pkg-config --cflags-only-I grpc++)
 CXXFLAGS += $(PCAPPLUSPLUS_INCLUDE_PATH)
@@ -122,7 +125,11 @@
 		git clone https://github.com/opencomputeproject/OpenNetworkLinux.git $(ONL_DIR)/OpenNetworkLinux; \
 		cp download/Makefile.onl $(ONL_DIR)/Makefile; \
 		install -m 755 download/build-onl.sh $(ONL_DIR)/OpenNetworkLinux; \
-		make -C $(ONL_DIR) onl-$(ONL_KERN_VER_MAJOR) INBAND=n; \
+		if [ "$(OPENOLTDEVICE)" = "phoenix" ]; then \
+			cp $(TOP_DIR)/device/$(OPENOLTDEVICE)/update_kernel_options.sh $(ONL_DIR)/OpenNetworkLinux/.; \
+			chmod 0755 $(ONL_DIR)/OpenNetworkLinux/update_kernel_options.sh; \
+		fi; \
+		make -C $(ONL_DIR) onl-$(ONL_KERN_VER_MAJOR) INBAND=n BOARD=$(OPENOLTDEVICE); \
 	else \
 		if [ "$(INBAND)" = n -a "$$(grep "inband" $(ONL_DIR)/onl_build.mode | cut -d= -f 2)" = y ]; then \
 			make -C $(ONL_DIR) onl-$(ONL_KERN_VER_MAJOR) INBAND=n; \
@@ -147,7 +154,7 @@
 		git clone https://github.com/balapi/bal-api-$(BAL_API_VER).git $(BAL_API_DIR); \
 	fi;
 bal-api-clean:
-	rm $(BAL_API_DIR)
+	rm -rf $(BAL_API_DIR)
 
 ########################################################################
 ##
@@ -157,7 +164,9 @@
 ##
 BAL_ZIP = SW-BCM686OLT_$(subst .,_,$(BAL_VER)).tgz
 SDK_ZIP = sdk-all-$(SDK_VER).tar.gz
-ACCTON_PATCH = ACCTON_BAL_$(BAL_VER)-V$(DEV_VER).patch
+PATCH_FILE != if [ "$(OPENOLTDEVICE)" = "phoenix" ]; then \
+	echo "PHOENIX_BAL_$(BAL_VER)_V$(DEV_VER).patch"; else \
+	echo "ACCTON_BAL_$(BAL_VER)-V$(DEV_VER).patch"; fi
 BAL_DIR = $(BUILD_DIR)/$(OPENOLTDEVICE)-bal
 BCM_SDK = $(BAL_DIR)/switch_sdk/$(SDK_VER)
 BALLIBDIR = $(BAL_DIR)/build/host_reference/host_api
@@ -187,14 +196,19 @@
 	tar zxvf download/$(BAL_ZIP) --strip 1 -C $(BAL_DIR)
 	cp download/$(SDK_ZIP) $(BCM_SDK)
 	chmod -R 744 $(BAL_DIR)
-	cat download/$(ACCTON_PATCH) | patch -p1 -d $(BAL_DIR)
+	cat download/$(PATCH_FILE) | patch -p1 -d $(BAL_DIR)
 ifeq ("$(strip $(OPENOLTDEVICE))","asfvolt16")
 	echo "setenv port_speed_for_100 $(PORT_100G_SPEED)" > $(PORT_SPEED_FILE)
 else ifeq ("$(strip $(OPENOLTDEVICE))","asgvolt64")
 	echo "setenv port_speed_for_100 $(PORT_100G_SPEED)" > $(PORT_SPEED_FILE)
 	echo "setenv port_speed_for_25 $(PORT_25G_SPEED)" >> $(PORT_SPEED_FILE)
 endif
+ifeq ("$(strip $(OPENOLTDEVICE))","phoenix")
+	chmod 0755 $(BAL_DIR)/onu_mgmt/libomcistack/me_codegen/omci_stack_codegen
+	make -C $(BAL_DIR) BOARD=$(OPENOLTDEVICE) ONL=$(TOP_DIR)/$(ONL_DIR)/OpenNetworkLinux ONL_DEBIAN_SUITE=$(shell lsb_release -c -s) OPEN_SOURCE=y
+else
 	make -C $(BAL_DIR) BOARD=$(OPENOLTDEVICE) ONL_DIR=$(TOP_DIR)/$(ONL_DIR)/OpenNetworkLinux OPEN_SOURCE=y
+endif
 	make -C $(BAL_DIR) BOARD=$(OPENOLTDEVICE) release_board
 endif
 
@@ -262,7 +276,11 @@
 all: $(BUILD_DIR)/openolt
 $(BUILD_DIR)/openolt: sdk protos $(OBJS)
 	$(CXX) $(LDFLAGS) -L$(BALLIBDIR) $(OBJS) $(OPENOLT_API_LIB) $(LIBPROTOBUF_PATH)/libprotobuf.a -o $@ -l$(BALLIBNAME) $(shell pkg-config --libs protobuf grpc++ grpc) $(PCAPPLUSPLUS_LIB_PATH)
+ifeq ("$(strip $(OPENOLTDEVICE))","phoenix")
+	ln -sf $(TOP_DIR)/$(BAL_DIR)/build/fs/$(OPENOLTDEVICE)/release/release_$(OPENOLTDEVICE)_v$(BAL_VER).tar.gz $(BUILD_DIR)/release_$(OPENOLTDEVICE)_V$(BAL_VER).$(DEV_VER).tar.gz
+else
 	ln -sf $(TOP_DIR)/$(BAL_DIR)/build/fs/$(OPENOLTDEVICE)/release/release_$(OPENOLTDEVICE)_V$(BAL_VER).$(DEV_VER).tar.gz $(BUILD_DIR)/.
+endif
 	ln -sf $(TOP_DIR)/$(BAL_DIR)/build/host_reference/host_api/strip/libbal_host_api.so $(BUILD_DIR)/.
 	ln -sf $(TOP_DIR)/$(BAL_DIR)/build/host_driver/dev_mgmt_daemon/dev_mgmt_daemon $(BUILD_DIR)/.
 	ln -sf $(LIBGRPC_PATH)/libz.so.1 $(BUILD_DIR)/libz.so.1
@@ -285,9 +303,12 @@
 	cp $(BUILD_DIR)/libstdc++.so.6 device/$(OPENOLTDEVICE)/mkdebian/debian
 	cp $(BUILD_DIR)/libbal_host_api.so device/$(OPENOLTDEVICE)/mkdebian/debian
 	cp -a scripts/init.d device/$(OPENOLTDEVICE)/mkdebian/debian
+ifeq ("$(strip $(OPENOLTDEVICE))","phoenix")
+	sed -i '/\/opt\/bcm68650\/svk_init.sh/c\    \/opt\/bcm68650\/svk_init.sh -qsfp_speed=$(PORT_40G_SPEED) -sfp_speed=$(PORT_10G_SPEED)' device/$(OPENOLTDEVICE)/mkdebian/debian/init.d/dev_mgmt_daemon
+endif
 	cp -a scripts/watchdog device/$(OPENOLTDEVICE)/mkdebian/debian
 	cd device/$(OPENOLTDEVICE)/mkdebian && ./build_$(OPENOLTDEVICE)_deb.sh
-	mv device/$(OPENOLTDEVICE)/*.deb $(BUILD_DIR)/openolt_$(OPENOLTDEVICE)-$(VERSION)-$(LABEL_VCS_REF).deb
+	mv device/$(OPENOLTDEVICE)/$(OPENOLTDEVICE)_*.deb $(BUILD_DIR)/openolt_$(OPENOLTDEVICE)-$(VERSION)-$(LABEL_VCS_REF).deb
 	make deb-cleanup
 
 inband-onl:
diff --git a/agent/device/phoenix/mkdebian/build_phoenix_deb.sh b/agent/device/phoenix/mkdebian/build_phoenix_deb.sh
new file mode 100755
index 0000000..e4cc706
--- /dev/null
+++ b/agent/device/phoenix/mkdebian/build_phoenix_deb.sh
@@ -0,0 +1,19 @@
+#!/bin/bash
+
+#Copyright 2018-present Open Networking Foundation
+#
+#Licensed under the Apache License, Version 2.0 (the "License");
+#you may not use this file except in compliance with the License.
+#You may obtain a copy of the License at
+#
+#http://www.apache.org/licenses/LICENSE-2.0
+#
+#Unless required by applicable law or agreed to in writing, software
+#distributed under the License is distributed on an "AS IS" BASIS,
+#WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#See the License for the specific language governing permissions and
+#limitations under the License.
+
+
+export ONL_ARCH="amd64"
+dpkg-buildpackage -b -us -uc -a"$ONL_ARCH"
diff --git a/agent/device/phoenix/mkdebian/debian/changelog b/agent/device/phoenix/mkdebian/debian/changelog
new file mode 100644
index 0000000..0a6dde0
--- /dev/null
+++ b/agent/device/phoenix/mkdebian/debian/changelog
@@ -0,0 +1,7 @@
+phoenix (3.4.9.8+radisys-V20210420) stable; urgency=high
+
+    * Based on code from SW-BCM686OLT_3_4_9_8.tgz.
+    * Patches required for BAL to support phoenix 3200g has been merged to
+      PHOENIX_BAL_3.4.9.8_V20210420.patch.
+
+ -- Thiyagarajan Subramani <thiyagarajan.subramani@radisys.com>  Tue, 20 APR 2021 09:30:00 +0400
diff --git a/agent/device/phoenix/mkdebian/debian/compat b/agent/device/phoenix/mkdebian/debian/compat
new file mode 100644
index 0000000..3b0923b
--- /dev/null
+++ b/agent/device/phoenix/mkdebian/debian/compat
@@ -0,0 +1 @@
+9
diff --git a/agent/device/phoenix/mkdebian/debian/control b/agent/device/phoenix/mkdebian/debian/control
new file mode 100644
index 0000000..744f914
--- /dev/null
+++ b/agent/device/phoenix/mkdebian/debian/control
@@ -0,0 +1,13 @@
+Source: phoenix
+Section: misc
+Priority: optional
+Maintainer: Thiyagarajan Subramani  <thiyagarajan.subramani@radisys.com>
+Build-Depends: debhelper (>= 4.0.0)
+Standards-Version: 3.6.2
+
+Package: phoenix
+Architecture: amd64
+Depends: ${shlibs:Depends}
+Description: Broadcom OLT drivers,CLI
+  ported from Broadcom SDK-3.4.9.8 package
+
diff --git a/agent/device/phoenix/mkdebian/debian/copyright b/agent/device/phoenix/mkdebian/debian/copyright
new file mode 100644
index 0000000..6e79a98
--- /dev/null
+++ b/agent/device/phoenix/mkdebian/debian/copyright
@@ -0,0 +1 @@
+(C) Copyright Broadcom Corporation 2003-2016
diff --git a/agent/device/phoenix/mkdebian/debian/files b/agent/device/phoenix/mkdebian/debian/files
new file mode 100644
index 0000000..76bc8b9
--- /dev/null
+++ b/agent/device/phoenix/mkdebian/debian/files
@@ -0,0 +1,3 @@
+phoenix-dbgsym_3.4.9.8+radisys-V20210420_amd64.deb debug extra
+phoenix_3.4.9.8+radisys-V20210420_amd64.buildinfo misc optional
+phoenix_3.4.9.8+radisys-V20210420_amd64.deb misc optional
diff --git a/agent/device/phoenix/mkdebian/debian/logrotate.d/openolt b/agent/device/phoenix/mkdebian/debian/logrotate.d/openolt
new file mode 100644
index 0000000..aa6ab06
--- /dev/null
+++ b/agent/device/phoenix/mkdebian/debian/logrotate.d/openolt
@@ -0,0 +1,10 @@
+/var/log/dev_mgmt_daemon.log
+/var/log/openolt.log
+{
+  rotate 7
+  daily
+  compress
+  missingok
+  delaycompress
+  copytruncate
+}
diff --git a/agent/device/phoenix/mkdebian/debian/phoenix.install b/agent/device/phoenix/mkdebian/debian/phoenix.install
new file mode 100644
index 0000000..ceeb05b
--- /dev/null
+++ b/agent/device/phoenix/mkdebian/debian/phoenix.install
@@ -0,0 +1 @@
+/tmp
diff --git a/agent/device/phoenix/mkdebian/debian/phoenix.postinst b/agent/device/phoenix/mkdebian/debian/phoenix.postinst
new file mode 100644
index 0000000..ab4a021
--- /dev/null
+++ b/agent/device/phoenix/mkdebian/debian/phoenix.postinst
@@ -0,0 +1,52 @@
+#!/bin/bash
+
+#Copyright 2018-present Open Networking Foundation
+#
+#Licensed under the Apache License, Version 2.0 (the "License");
+#you may not use this file except in compliance with the License.
+#You may obtain a copy of the License at
+#
+#http://www.apache.org/licenses/LICENSE-2.0
+#
+#Unless required by applicable law or agreed to in writing, software
+#distributed under the License is distributed on an "AS IS" BASIS,
+#WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#See the License for the specific language governing permissions and
+#limitations under the License.
+
+rm -rf /opt/bcm686*
+rm -rf /broadcom
+tar zxf /tmp/release_phoenix_V*.tar.gz -C / 2>&1 > /dev/null
+
+mkdir -p /opt/openolt && cp /tmp/watchdog/openolt_dev_mgmt_daemon_process_watchdog /opt/openolt && cp /tmp/watchdog/watchdog.config /opt/openolt
+
+sed -i -e '$i rm -rf \/tmp\/bcm68650_svk_init\/' /etc/rc.local
+[ -f /opt/openolt/openolt_dev_mgmt_daemon_process_watchdog ] && grep -q '\/opt\/openolt\/openolt_dev_mgmt_daemon_process_watchdog' /etc/rc.local || sed -i -e '$i nohup bash \/opt\/openolt\/openolt_dev_mgmt_daemon_process_watchdog &' /etc/rc.local
+
+rm -f /tmp/release_phoenix_V*.tar.gz
+rm -f /run/bcm686*
+
+
+mv /tmp/openolt /broadcom
+mv /tmp/libz.so.1 /usr/local/lib
+mv /tmp/libstdc++.so.6 /usr/local/lib
+mv /tmp/libbal_host_api.so /usr/local/lib
+
+cp /tmp/logrotate.d/openolt /etc/logrotate.d
+chmod +x /opt/openolt/openolt_dev_mgmt_daemon_process_watchdog
+
+cp /tmp/init.d/dev_mgmt_daemon /etc/init.d
+chmod +x /etc/init.d/dev_mgmt_daemon
+update-rc.d dev_mgmt_daemon defaults
+[ "A`cat ~/.bashrc| grep LD_LIBRARY_PATH`" = "A" ] && echo "export LD_LIBRARY_PATH=/broadcom:\$LD_LIBRARY_PATH" >> ~/.bashrc; . ~/.bashrc
+ldconfig /broadcom
+ln -s /broadcom/libbal_core_real.*.so /broadcom/libbal_core.so
+#cd /broadcom/ && export LD_LIBRARY_PATH=LD_LIBRARY_PATH:/broadcom && ./dev_mgmt_daemon -d -pcie
+service dev_mgmt_daemon start
+echo "Wait for 30 sec for BAL to be ready"
+sleep 30
+
+cp /tmp/init.d/openolt /etc/init.d
+chmod +x /etc/init.d/openolt
+update-rc.d openolt defaults
+service openolt start
diff --git a/agent/device/phoenix/mkdebian/debian/phoenix.postrm b/agent/device/phoenix/mkdebian/debian/phoenix.postrm
new file mode 100644
index 0000000..fd44b74
--- /dev/null
+++ b/agent/device/phoenix/mkdebian/debian/phoenix.postrm
@@ -0,0 +1,51 @@
+#!/bin/bash
+
+#Copyright 2018-present Open Networking Foundation
+#
+#Licensed under the Apache License, Version 2.0 (the "License");
+#you may not use this file except in compliance with the License.
+#You may obtain a copy of the License at
+#
+#http://www.apache.org/licenses/LICENSE-2.0
+#
+#Unless required by applicable law or agreed to in writing, software
+#distributed under the License is distributed on an "AS IS" BASIS,
+#WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#See the License for the specific language governing permissions and
+#limitations under the License.
+
+# kill CLI applications
+echo "kill running time application"
+[ -n "`pidof openolt`" ] && service openolt stop
+[ -n "`pidof openolt`" ] && killall openolt
+[ -n "`pidof dev_mgmt_daemon`" ] && service dev_mgmt_daemon stop
+[ -n "`pidof dev_mgmt_daemon`" ] && killall dev_mgmt_daemon
+[ -n "`pidof bcm.user`" ] && killall bcm.user
+[ -n "`pidof dev_mgmt_attach`" ] && killall dev_mgmt_attach
+[ -n "`pidof embedded_console`" ] && killall embedded_console
+[ -n "`pidof example_user_appl`" ] && killall example_user_appl
+
+rm -f /tmp/root_dev_mgmt_pid /tmp/root_dev_mgmt_init_done
+sleep 3
+
+if [ -d /opt/bcm68650 ]; then
+    bash /opt/bcm68650/svk_init.sh -clean
+    sleep 3
+fi
+
+rm -rf /tmp/bcm68650_svk_init/
+
+rm -rf /opt/bcm68650
+rm -rf /opt/openolt
+rm -rf /broadcom
+
+sed -i '\/rm -rf \/tmp\/bcm68650_svk_init/d' /etc/rc.local
+sed -i '\/nohup bash \/opt\/openolt\/openolt_dev_mgmt_daemon_process_watchdog &/d' /etc/rc.local
+
+rm -rf /run/bcm68650
+rm -rf /usr/local/lib/libz.so.1
+rm -rf /usr/local/lib/libbal_host_api.so
+rm -rf /usr/local/lib/libstdc++.so.6
+rm -f /etc/init.d/openolt
+rm -f /etc/init.d/dev_mgmt_daemon
+rm -f /etc/logrotate.d/openolt
diff --git a/agent/device/phoenix/mkdebian/debian/phoenix.preinst b/agent/device/phoenix/mkdebian/debian/phoenix.preinst
new file mode 100644
index 0000000..fd44b74
--- /dev/null
+++ b/agent/device/phoenix/mkdebian/debian/phoenix.preinst
@@ -0,0 +1,51 @@
+#!/bin/bash
+
+#Copyright 2018-present Open Networking Foundation
+#
+#Licensed under the Apache License, Version 2.0 (the "License");
+#you may not use this file except in compliance with the License.
+#You may obtain a copy of the License at
+#
+#http://www.apache.org/licenses/LICENSE-2.0
+#
+#Unless required by applicable law or agreed to in writing, software
+#distributed under the License is distributed on an "AS IS" BASIS,
+#WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#See the License for the specific language governing permissions and
+#limitations under the License.
+
+# kill CLI applications
+echo "kill running time application"
+[ -n "`pidof openolt`" ] && service openolt stop
+[ -n "`pidof openolt`" ] && killall openolt
+[ -n "`pidof dev_mgmt_daemon`" ] && service dev_mgmt_daemon stop
+[ -n "`pidof dev_mgmt_daemon`" ] && killall dev_mgmt_daemon
+[ -n "`pidof bcm.user`" ] && killall bcm.user
+[ -n "`pidof dev_mgmt_attach`" ] && killall dev_mgmt_attach
+[ -n "`pidof embedded_console`" ] && killall embedded_console
+[ -n "`pidof example_user_appl`" ] && killall example_user_appl
+
+rm -f /tmp/root_dev_mgmt_pid /tmp/root_dev_mgmt_init_done
+sleep 3
+
+if [ -d /opt/bcm68650 ]; then
+    bash /opt/bcm68650/svk_init.sh -clean
+    sleep 3
+fi
+
+rm -rf /tmp/bcm68650_svk_init/
+
+rm -rf /opt/bcm68650
+rm -rf /opt/openolt
+rm -rf /broadcom
+
+sed -i '\/rm -rf \/tmp\/bcm68650_svk_init/d' /etc/rc.local
+sed -i '\/nohup bash \/opt\/openolt\/openolt_dev_mgmt_daemon_process_watchdog &/d' /etc/rc.local
+
+rm -rf /run/bcm68650
+rm -rf /usr/local/lib/libz.so.1
+rm -rf /usr/local/lib/libbal_host_api.so
+rm -rf /usr/local/lib/libstdc++.so.6
+rm -f /etc/init.d/openolt
+rm -f /etc/init.d/dev_mgmt_daemon
+rm -f /etc/logrotate.d/openolt
diff --git a/agent/device/phoenix/mkdebian/debian/rules b/agent/device/phoenix/mkdebian/debian/rules
new file mode 100755
index 0000000..fc22495
--- /dev/null
+++ b/agent/device/phoenix/mkdebian/debian/rules
@@ -0,0 +1,74 @@
+#!/usr/bin/make -f
+# See debhelper(7) (uncomment to enable)
+# output every command that modifies files on the build system.
+#DH_VERBOSE = 1
+
+# see EXAMPLES in dpkg-buildflags(1) and read /usr/share/dpkg/*
+DPKG_EXPORT_BUILDFLAGS = 1
+include /usr/share/dpkg/default.mk
+
+# see FEATURE AREAS in dpkg-buildflags(1)
+#export DEB_BUILD_MAINT_OPTIONS = hardening=+all
+
+# see ENVIRONMENT in dpkg-buildflags(1)
+# package maintainers to append CFLAGS
+#export DEB_CFLAGS_MAINT_APPEND  = -Wall -pedantic
+# package maintainers to append LDFLAGS
+#export DEB_LDFLAGS_MAINT_APPEND = -Wl,--as-needed
+
+# main packaging script based on dh7 syntax
+%:
+	dh $@
+
+DOCS=LEGAL_TERMS README LICENSE_APACHE20
+
+DEB_DH_INSTALL_SOURCEDIR = $(CURDIR)/debian/tmp
+
+override_dh_auto_install:
+	mkdir -p $(DEB_DH_INSTALL_SOURCEDIR)/tmp
+	cp -a $(CURDIR)/debian/release_phoenix_V*.tar.gz $(DEB_DH_INSTALL_SOURCEDIR)/tmp
+	cp -a $(CURDIR)/debian/libz.so.1 $(DEB_DH_INSTALL_SOURCEDIR)/tmp
+	cp -a $(CURDIR)/debian/libstdc++.so.6 $(DEB_DH_INSTALL_SOURCEDIR)/tmp
+	cp -a $(CURDIR)/debian/libbal_host_api.so $(DEB_DH_INSTALL_SOURCEDIR)/tmp
+	cp -a $(CURDIR)/debian/openolt $(DEB_DH_INSTALL_SOURCEDIR)/tmp
+	cp -a $(CURDIR)/debian/init.d $(DEB_DH_INSTALL_SOURCEDIR)/tmp
+	cp -a $(CURDIR)/debian/logrotate.d $(DEB_DH_INSTALL_SOURCEDIR)/tmp
+	cp -a $(CURDIR)/debian/watchdog $(DEB_DH_INSTALL_SOURCEDIR)/tmp
+
+#override_dh_shlibdeps:
+#	dh_shlibdeps --dpkg-shlibdeps-params=--ignore-missing-info -l$(ONLP_LIB_PATH):$(OFDPA_LIB_PATH)
+
+# avoid auto strip for debug ofagentapp.dbg
+#
+#override_dh_strip:
+#	echo "No auto strip!"
+
+#override_dh_installdeb:
+#	dh_installdeb
+#	for pkg in $$(dh_listpackages); do \
+#		sed -i -e 's!#DEB_SOURCE#!$(DEB_SOURCE)!' debian/$$pkg/DEBIAN/*; \
+#		sed -i -e 's!#OPDPA_VER_SUFFIX#!-$(OPDPA_VER)!g' debian/$$pkg/DEBIAN/*; \
+#	done
+
+test:
+	@echo DEB_SOURCE=$(DEB_SOURCE)
+	@echo DEB_VERSION=$(DEB_VERSION)
+	@echo DEB_VERSION_EPOCH_UPSTREAM=$(DEB_VERSION_EPOCH_UPSTREAM)
+	@echo DEB_VERSION_UPSTREAM_REVISION=$(DEB_VERSION_UPSTREAM_REVISION)
+	@echo DEB_VERSION_UPSTREAM=$(DEB_VERSION_UPSTREAM)
+	@echo DEB_DISTRIBUTION=$(DEB_DISTRIBUTION)
+	@echo DEB_HOST_ARCH=$(DEB_HOST_ARCH)
+	@echo DEB_HOST_ARCH_CPU=$(DEB_HOST_ARCH_CPU)
+	@echo DEB_HOST_ARCH_OS=$(DEB_HOST_ARCH_OS)
+	@echo DEB_HOST_GNU_TYPE=$(DEB_HOST_GNU_TYPE)
+	@echo DEB_HOST_GNU_CPU=$(DEB_HOST_GNU_CPU)
+	@echo DEB_HOST_GNU_SYSTEM=$(DEB_HOST_GNU_SYSTEM)
+	@echo DEB_BUILD_ARCH=$(DEB_BUILD_ARCH)
+	@echo DEB_BUILD_ARCH_CPU=$(DEB_BUILD_ARCH_CPU)
+	@echo DEB_BUILD_ARCH_OS=$(DEB_BUILD_ARCH_OS)
+	@echo DEB_BUILD_GNU_TYPE=$(DEB_BUILD_GNU_TYPE)
+	@echo DEB_BUILD_GNU_CPU=$(DEB_BUILD_GNU_CPU)
+	@echo DEB_BUILD_GNU_SYSTEM=$(DEB_BUILD_GNU_SYSTEM)
+	@echo ONLP_LIB_PATH=$(ONLP_LIB_PATH)
+#	@echo OFDPA_LIB_PATH=$(OFDPA_LIB_PATH)
+#	@echo OFDPA_BIN_PATH=$(OFDPA_BIN_PATH)
diff --git a/agent/device/phoenix/update_kernel_options.sh b/agent/device/phoenix/update_kernel_options.sh
new file mode 100644
index 0000000..0ff4c42
--- /dev/null
+++ b/agent/device/phoenix/update_kernel_options.sh
@@ -0,0 +1,140 @@
+#!/bin/bash
+
+#Copyright 2018-present Open Networking Foundation
+#
+#Licensed under the Apache License, Version 2.0 (the "License");
+#you may not use this file except in compliance with the License.
+#You may obtain a copy of the License at
+#
+#http://www.apache.org/licenses/LICENSE-2.0
+#
+#Unless required by applicable law or agreed to in writing, software
+#distributed under the License is distributed on an "AS IS" BASIS,
+#WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#See the License for the specific language governing permissions and
+#limitations under the License.
+
+TOPDIR=`pwd`
+KERNEL_CONFIG_FILE=${TOPDIR}/packages/base/any/kernels/4.19-lts/configs/x86_64-all/x86_64-all.config
+
+ADDITIONAL_OPTIONS=(
+CONFIG_CC_IS_GCC=y
+CONFIG_GCC_VERSION=80300
+CONFIG_CLANG_VERSION=0
+CONFIG_CC_HAS_ASM_GOTO=y
+CONFIG_IRQ_WORK=y
+CONFIG_BUILDTIME_EXTABLE_SORT=y
+CONFIG_THREAD_INFO_IN_TASK=y
+"# CONFIG_ACPI_IPMI is not set"
+CONFIG_HOTPLUG_PCI_ACPI_IBM=y
+CONFIG_BCM_NET_PHYLIB=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_AX88179_178A=y
+CONFIG_USB_NET_CDCETHER=y
+CONFIG_USB_NET_CDC_EEM=y
+CONFIG_USB_NET_CDC_NCM=y
+"# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set"
+"# CONFIG_USB_NET_CDC_MBIM is not set"
+"# CONFIG_USB_NET_DM9601 is not set"
+"# CONFIG_USB_NET_SR9700 is not set"
+"# CONFIG_USB_NET_SR9800 is not set"
+"# CONFIG_USB_NET_SMSC75XX is not set"
+"# CONFIG_USB_NET_SMSC95XX is not set"
+"# CONFIG_USB_NET_GL620A is not set"
+CONFIG_USB_NET_NET1080=y
+"# CONFIG_USB_NET_PLUSB is not set"
+"# CONFIG_USB_NET_MCS7830 is not set"
+"# CONFIG_USB_NET_RNDIS_HOST is not set"
+CONFIG_USB_NET_CDC_SUBSET_ENABLE=y
+CONFIG_USB_NET_CDC_SUBSET=y
+"# CONFIG_USB_ALI_M5632 is not set"
+"# CONFIG_USB_AN2720 is not set"
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+"# CONFIG_USB_EPSON2888 is not set"
+"# CONFIG_USB_KC2190 is not set"
+CONFIG_USB_NET_ZAURUS=y
+"# CONFIG_USB_NET_CX82310_ETH is not set"
+"# CONFIG_USB_NET_KALMIA is not set"
+"# CONFIG_USB_NET_QMI_WWAN is not set"
+"# CONFIG_USB_NET_INT51X1 is not set"
+"# CONFIG_USB_SIERRA_NET is not set"
+"# CONFIG_USB_VL600 is not set"
+"# CONFIG_USB_NET_CH9200 is not set"
+CONFIG_IPMI_DMI_DECODE=y
+CONFIG_IPMI_PANIC_EVENT=y
+"# CONFIG_IPMI_PANIC_STRING is not set"
+CONFIG_IPMI_DEVICE_INTERFACE=y
+CONFIG_IPMI_SI=y
+"# CONFIG_IPMI_SSIF is not set"
+"# CONFIG_IPMI_WATCHDOG is not set"
+CONFIG_IPMI_POWEROFF=y
+CONFIG_HW_RANDOM_TPM=y
+CONFIG_TCG_TIS_CORE=y
+CONFIG_TCG_TIS=y
+CONFIG_TCG_TIS_SPI=y
+CONFIG_TCG_TIS_I2C_ATMEL=y
+CONFIG_TCG_TIS_I2C_INFINEON=y
+CONFIG_TCG_TIS_I2C_NUVOTON=y
+CONFIG_TCG_NSC=y
+CONFIG_TCG_ATMEL=y
+CONFIG_TCG_INFINEON=y
+CONFIG_TCG_CRB=y
+CONFIG_TCG_VTPM_PROXY=y
+CONFIG_TCG_TIS_ST33ZP24=y
+CONFIG_TCG_TIS_ST33ZP24_I2C=y
+CONFIG_TCG_TIS_ST33ZP24_SPI=y
+CONFIG_I2C_MUX_PCA954X_BUSES_CREATE_FORCE=y
+"# CONFIG_SENSORS_IBMAEM is not set"
+"# CONFIG_SENSORS_IBMPEX is not set"
+"# CONFIG_TRUSTED_KEYS is not set"
+CONFIG_ENABLE_DEFAULT_TRACERS=y
+"# CONFIG_FTRACE_STARTUP_TEST is not set"
+)
+
+OPTIONS_TO_CHANGE=(
+CONFIG_HOTPLUG_PCI_PCIE=y
+CONFIG_HOTPLUG_PCI_ACPI=y
+CONFIG_HOTPLUG_PCI_SHPC=y
+CONFIG_EEPROM_AT24=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_USB_USBNET=y
+CONFIG_DEVKMEM=y
+CONFIG_IPMI_HANDLER=y
+CONFIG_TCG_TPM=y
+CONFIG_I2C_ISMT=y
+CONFIG_GPIO_ICH=y
+CONFIG_X86_PKG_TEMP_THERMAL=y
+CONFIG_INTEL_PCH_THERMAL=y
+CONFIG_LPC_ICH=y
+CONFIG_SECURITYFS=y
+)
+
+OPTIONS_TO_COMMENT=(
+CONFIG_EEPROM_LEGACY
+CONFIG_I2C_MUX_REG
+CONFIG_I2C_MUX_MLXCPLD
+CONFIG_GENERIC_TRACER
+CONFIG_BLK_DEV_IO_TRACE
+)
+
+add_additional_options() {
+	for i in "${ADDITIONAL_OPTIONS[@]}"; do echo "$i" >> ${KERNEL_CONFIG_FILE}; done
+}
+
+modify_options() {
+	for i in "${OPTIONS_TO_CHANGE[@]}"; do
+		option=$(echo $i | cut -d= -f1);
+		sed -i "s/.*$option.*/$i/" ${KERNEL_CONFIG_FILE};
+	done
+}
+
+comment_options() {
+	for i in "${OPTIONS_TO_COMMENT[@]}"; do
+		sed -i "s/.*$i.*/# $i is not set/" ${KERNEL_CONFIG_FILE};
+	done
+}
+
+modify_options
+comment_options
+add_additional_options
diff --git a/agent/device/phoenix/vendor.cc b/agent/device/phoenix/vendor.cc
new file mode 100644
index 0000000..86836ff
--- /dev/null
+++ b/agent/device/phoenix/vendor.cc
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2018-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "vendor.h"
+
+void vendor_init()
+{
+}
diff --git a/agent/device/phoenix/vendor.h b/agent/device/phoenix/vendor.h
new file mode 100644
index 0000000..3d08310
--- /dev/null
+++ b/agent/device/phoenix/vendor.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright 2018-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __VENDOR_H__
+#define __VENDOR_H__
+#define VENDOR_ID "Radisys"
+#define RLT3200G
+#define MODEL_ID  "phoenix"
+#define MAX_SUPPORTED_PON 64
+#define ONU_BIT_TRANSMISSION_DELAY 0.8038585/1000 /* unit: ns to us */
+#define MINIMUM_ONU_RESPONSE_RANGING_TIME 198075 /* hardcore: this is ranging time for the shortest distance, typically 35us */
+
+// DeviceInfo definitions
+
+#define ONU_ID_START 1
+#define ONU_ID_END 32
+#define MAX_ONUS_PER_PON ONU_ID_END
+
+#define ALLOC_ID_START 256
+#define ALLOC_ID_END 767
+
+#define GEM_PORT_ID_START 256
+#define GEM_PORT_ID_END 4095
+
+#define FLOW_ID_START 1
+#define FLOW_ID_END 65535
+#define MAX_FLOW_ID FLOW_ID_END
+#define INVALID_FLOW_ID 0
+
+#endif
diff --git a/agent/download/Makefile.onl b/agent/download/Makefile.onl
index 9f87264..97509e7 100644
--- a/agent/download/Makefile.onl
+++ b/agent/download/Makefile.onl
@@ -14,6 +14,7 @@
 
 COMMIT_ID = 72b95a7
 INBAND = "n"
+BOARD = ""
 
 onl-4.14:
 	if [ $(INBAND) = y ]; then \
@@ -21,3 +22,9 @@
 	else \
 	    cd OpenNetworkLinux && git stash && git checkout -B $@ $(COMMIT_ID) && docker/tools/onlbuilder --non-interactive -8 -c ./build-onl.sh; \
 	fi;
+onl-4.19:
+	if [ "$(BOARD)" = "phoenix" ]; then \
+	        cd OpenNetworkLinux && git stash && git checkout -B $@ $(COMMIT_ID) && bash update_kernel_options.sh && docker/tools/onlbuilder --non-interactive -9 -c ./build-onl.sh; \
+	else \
+		cd OpenNetworkLinux && git stash && git checkout -B $@ $(COMMIT_ID) && docker/tools/onlbuilder --non-interactive -9 -c ./build-onl.sh; \
+	fi;
diff --git a/agent/scripts/init.d/dev_mgmt_daemon b/agent/scripts/init.d/dev_mgmt_daemon
index 3b05b8f..e89d702 100755
--- a/agent/scripts/init.d/dev_mgmt_daemon
+++ b/agent/scripts/init.d/dev_mgmt_daemon
@@ -19,6 +19,21 @@
 PORT_SPEED_FILE="$APPDIR/port_speed.soc"
 TOPOLOGY_CONFIG_FILE="$APPDIR/topology_config.ini"
 OLT_MODEL=`cat /sys/devices/virtual/dmi/id/board_name`
+PRODUCT_NAME=
+
+# phoenix - wait for onlp driver to load
+if [ "$OLT_MODEL" = "Default string" ]; then
+    RETRY_COUNT=0
+    while [ -z "$PRODUCT_NAME" ]
+    do
+        PRODUCT_NAME=$(onlpd -s | grep Part | awk '{print $3}')
+        echo "RETRY_COUNT=$RETRY_COUNT, product name=$PRODUCT_NAME"
+        sleep 1
+	RETRY_COUNT=$((RETRY_COUNT+1))
+    done
+    OLT_MODEL=$PRODUCT_NAME
+fi
+
 if [ "$OLT_MODEL" = "ASXvOLT16" ]; then
     Port_100G_SPEED=`cat $PORT_SPEED_FILE | awk -F "port_speed_for_100 " '{print $2}'`
     [ "$Port_100G_SPEED" = "10000" ] && TOPOLOGY_CONFIG_FILE="$APPDIR/topology_config_16_ports.ini"
@@ -28,6 +43,8 @@
     [ "$Port_100G_SPEED" = "10000" ] && TOPOLOGY_CONFIG_FILE="$APPDIR/topology_config_16_ports.ini"
     Port_25G_SPEED=`cat $PORT_SPEED_FILE | awk -F "port_speed_for_25 " '{print $2}'`
     APPARGS="-pcie -d -port_100g_speed $Port_100G_SPEED -pcie -port_25g_speed $Port_25G_SPEED -topology_config_file $TOPOLOGY_CONFIG_FILE"
+elif [ "$OLT_MODEL" = "RLT-3200G" ] || [ "$OLT_MODEL" = "RLT-3200X" ] || [ "$OLT_MODEL" = "RLT-1600G" ] || [ "$OLT_MODEL" = "RLT-1600X" ]; then
+    APPARGS="-pcie -d"
 else
     Port_100G_SPEED="100000"
     Port_25G_SPEED="25000"
@@ -39,7 +56,12 @@
 . /lib/lsb/init-functions
 
 start() {
-  /opt/bcm68620/svk_init.sh
+  if [ "$OLT_MODEL" = "ASGvOLT64" ] || [ "$OLT_MODEL" = "ASXvOLT16" ]; then
+    /opt/bcm68620/svk_init.sh
+  elif [ "$OLT_MODEL" = "RLT-3200G" ] || [ "$OLT_MODEL" = "RLT-3200X" ] || [ "$OLT_MODEL" = "RLT-1600G" ] || [ "$OLT_MODEL" = "RLT-1600X" ]; then
+    /opt/bcm68650/svk_init.sh
+  fi
+
   sleep 10
   printf "Starting '$NAME'... "
   touch /var/log/$NAME.log
diff --git a/agent/src/core_api_handler.cc b/agent/src/core_api_handler.cc
index a4e902f..6252355 100644
--- a/agent/src/core_api_handler.cc
+++ b/agent/src/core_api_handler.cc
@@ -299,6 +299,25 @@
     return Status::OK;
 }
 
+void reset_pon_device(bcmolt_odid dev)
+{
+    bcmos_errno err;
+    bcmolt_device_reset oper;
+    bcmolt_device_key key = {.device_id = dev};
+
+    OPENOLT_LOG(INFO, openolt_log_id, "Reset PON device: %d\n", dev);
+
+    BCMOLT_OPER_INIT(&oper, device, reset, key);
+    err = bcmolt_oper_submit(dev_id, &oper.hdr);
+    if (err)
+    {
+        OPENOLT_LOG(ERROR, openolt_log_id, "Failed to reset PON device(%d) failed, err = %s\n", dev, bcmos_strerror(err));
+    }else
+    {
+        OPENOLT_LOG(INFO, openolt_log_id, "Reset PON device(%d) success\n", dev);
+    }
+}
+
 Status Enable_(int argc, char *argv[]) {
     bcmos_errno err;
     bcmolt_host_init_parms init_parms = {};
@@ -383,6 +402,12 @@
                     bcmolt_device_key key = {.device_id = dev};
                     bcmolt_device_connect oper;
                     BCMOLT_OPER_INIT(&oper, device, connect, key);
+
+		    /* BAL saves current state into dram_tune soc file and when dev_mgmt_daemon restarts
+		     * it retains config from soc file. If openolt agent try to connect device without
+		     * device reset device initialization fails hence doing device reset here. */
+                    reset_pon_device(dev);
+
                     if (MODEL_ID == "asfvolt16") {
                         BCMOLT_MSG_FIELD_SET(&oper, inni_config.mode, BCMOLT_INNI_MODE_ALL_10_G_XFI);
                         BCMOLT_MSG_FIELD_SET (&oper, system_mode, BCMOLT_SYSTEM_MODE_XGS__2_X);
@@ -390,6 +415,14 @@
                         BCMOLT_MSG_FIELD_SET(&oper, inni_config.mode, BCMOLT_INNI_MODE_ALL_10_G_XFI);
                         BCMOLT_MSG_FIELD_SET(&oper, inni_config.mux, BCMOLT_INNI_MUX_FOUR_TO_ONE);
                         BCMOLT_MSG_FIELD_SET (&oper, system_mode, BCMOLT_SYSTEM_MODE_GPON__16_X);
+                    } else if (MODEL_ID == "phoenix") {
+                        BCMOLT_MSG_FIELD_SET(&oper, inni_config.mux, BCMOLT_INNI_MUX_NONE);
+                        if(dev == 1) {
+                            BCMOLT_MSG_FIELD_SET(&oper, inni_config.mux, BCMOLT_INNI_MUX_FOUR_TO_ONE);
+                        }
+                        BCMOLT_MSG_FIELD_SET (&oper, ras_ddr_mode, BCMOLT_RAS_DDR_USAGE_MODE_TWO_DDRS);
+                        BCMOLT_MSG_FIELD_SET(&oper, inni_config.mode, BCMOLT_INNI_MODE_ALL_10_G_XFI);
+                        BCMOLT_MSG_FIELD_SET (&oper, system_mode, BCMOLT_SYSTEM_MODE_GPON__16_X);
                     }
                     err = bcmolt_oper_submit(dev_id, &oper.hdr);
                     if (err) {
diff --git a/agent/test/Makefile b/agent/test/Makefile
index 5f545e4..cb70c69 100644
--- a/agent/test/Makefile
+++ b/agent/test/Makefile
@@ -30,7 +30,7 @@
 ##
 ##
 
-CXX = g++-4.9
+CXX != if [ "$(OPENOLTDEVICE)" = "phoenix" ]; then echo "g++-6"; else echo "g++-4.9"; fi
 CXXFLAGS += -g -O2
 CXXFLAGS += `pkg-config --cflags-only-I grpc++` -I/usr/local/include/pcapplusplus/
 CPPFLAGS += `pkg-config --cflags protobuf grpc`
diff --git a/agent/test/src/bal_stub.cc b/agent/test/src/bal_stub.cc
index 2c778ce..62eb931 100644
--- a/agent/test/src/bal_stub.cc
+++ b/agent/test/src/bal_stub.cc
@@ -301,7 +301,7 @@
 
 bcmos_errno bcmos_task_query(const bcmos_task *task, bcmos_task_parm *parm) {
     printf (" -- stub bcmos_task_query called --\n");
-    return BCM_ERR_OK;
+    return BCM_ERR_ALREADY;
 }
 
 bcmos_errno bcmos_task_create(bcmos_task *task, const bcmos_task_parm *parm) {