VOL-765
Modification of ONU indication to have admin state
ONU oper state change, ONU indication and ONU dying-gasp changes to reflect operation state and admin state of ONU and pass it on to Voltha
Change-Id: I1159bead716bb66d59b491603202b7336a6ce140
diff --git a/protos/openolt.proto b/protos/openolt.proto
index c9f6d98..93c64c1 100644
--- a/protos/openolt.proto
+++ b/protos/openolt.proto
@@ -79,7 +79,8 @@
fixed32 intf_id = 1;
fixed32 onu_id = 2;
string oper_state = 3; // up, down
- SerialNumber serial_number = 4;
+ string admin_state = 4; // up, down
+ SerialNumber serial_number = 5;
}
message IntfOperIndication {
diff --git a/src/indications.cc b/src/indications.cc
index da63fc7..298f51f 100644
--- a/src/indications.cc
+++ b/src/indications.cc
@@ -103,7 +103,7 @@
openolt::Indication ind;
openolt::IntfOperIndication* intf_oper_ind = new openolt::IntfOperIndication;
std::cout << "intf oper state indication, intf_id:"
- << ((bcmbal_interface_ind *)obj)->key.intf_id
+ << ((bcmbal_interface_oper_status_change *)obj)->key.intf_id
<< " type:" << ((bcmbal_interface_oper_status_change *)obj)->key.intf_type
<< " oper_state:" << ((bcmbal_interface_oper_status_change *)obj)->data.new_oper_status
<< " admin_state:" << ((bcmbal_interface_oper_status_change *)obj)->data.admin_state
@@ -139,7 +139,40 @@
bcmos_errno OnuDyingGaspIndication(bcmbal_obj *obj) {
openolt::Indication ind;
- std::cout << "onu dying-gasp indication" << std::endl;
+ openolt::OnuIndication* onu_ind = new openolt::OnuIndication;
+ openolt::SerialNumber* serial_number = new openolt::SerialNumber;
+
+ bcmbal_subscriber_terminal_key *key =
+ &(((bcmbal_subscriber_terminal_dgi*)obj)->key);
+
+ bcmbal_subscriber_terminal_dgi_data *data =
+ &(((bcmbal_subscriber_terminal_dgi*)obj)->data);
+
+
+ std::cout << "onu dying-gasp indication, intf_id:"
+ << key->intf_id
+ << ", onu_id:"
+ << key->sub_term_id
+ << ", alarm: "
+ << data->dgi_status << std::endl;
+
+ onu_ind->set_intf_id(key->intf_id);
+ onu_ind->set_onu_id(key->sub_term_id);
+ const char* zeros4 = "0000";
+ const char* zeros8 = "00000000";
+ serial_number->set_vendor_id(zeros4);
+ serial_number->set_vendor_specific(zeros8);
+ onu_ind->set_allocated_serial_number(serial_number);
+ //ONU is dying, set operating state to down
+ onu_ind->set_oper_state("down");
+ //TODO: set admin state to unknow ? For now assume that it is up otherwise
+ //we would not have received the alarm
+ onu_ind->set_admin_state("up");
+
+
+ ind.set_allocated_onu_ind(onu_ind);
+
+ oltIndQ.push(ind);
return BCM_ERR_OK;
}
@@ -195,6 +228,17 @@
serial_number->set_vendor_id(reinterpret_cast<const char *>(in_serial_number->vendor_id), 4);
serial_number->set_vendor_specific(reinterpret_cast<const char *>(in_serial_number->vendor_specific), 8);
onu_ind->set_allocated_serial_number(serial_number);
+ if (data->oper_status == BCMBAL_STATE_UP) {
+ onu_ind->set_oper_state("up");
+ } else {
+ onu_ind->set_oper_state("down");
+ }
+ if (data->admin_state == BCMBAL_STATE_UP) {
+ onu_ind->set_admin_state("up");
+ } else {
+ onu_ind->set_admin_state("down");
+ }
+
ind.set_allocated_onu_ind(onu_ind);
oltIndQ.push(ind);
@@ -203,7 +247,46 @@
bcmos_errno OnuOperIndication(bcmbal_obj *obj) {
openolt::Indication ind;
- std::cout << "onu oper state indication" << std::endl;
+ openolt::OnuIndication* onu_ind = new openolt::OnuIndication;
+ openolt::SerialNumber* serial_number = new openolt::SerialNumber;
+
+ bcmbal_subscriber_terminal_key *key =
+ &(((bcmbal_subscriber_terminal_oper_status_change*)obj)->key);
+
+ bcmbal_subscriber_terminal_oper_status_change_data *data =
+ &(((bcmbal_subscriber_terminal_oper_status_change*)obj)->data);
+
+
+ std::cout << "onu oper state indication, intf_id:"
+ << key->intf_id
+ << " onu_id: "
+ << key->sub_term_id
+ << " old oper state: "
+ << data->old_oper_status
+ << " new oper state:"
+ << data->new_oper_status << std::endl;
+
+ onu_ind->set_intf_id(key->intf_id);
+ onu_ind->set_onu_id(key->sub_term_id);
+ const char* zeros4 = "0000";
+ const char* zeros8 = "00000000";
+ serial_number->set_vendor_id(zeros4);
+ serial_number->set_vendor_specific(zeros8);
+ onu_ind->set_allocated_serial_number(serial_number);
+ if (data->new_oper_status == BCMBAL_STATE_UP) {
+ onu_ind->set_oper_state("up");
+ } else {
+ onu_ind->set_oper_state("down");
+ }
+ if (data->admin_state == BCMBAL_STATE_UP) {
+ onu_ind->set_admin_state("up");
+ } else {
+ onu_ind->set_admin_state("down");
+ }
+
+ ind.set_allocated_onu_ind(onu_ind);
+
+ oltIndQ.push(ind);
return BCM_ERR_OK;
}