diff --git a/config/default.yml b/config/default.yml
new file mode 100644
index 0000000..0be591e
--- /dev/null
+++ b/config/default.yml
@@ -0,0 +1,47 @@
+# Deployment configuration for VirtualBox based head node.
+#
+# This deployment configuration can be utilized with the head node created
+# via `vargrant up headnode` from the gerrit.opencord.org/maas repository.
+---
+seedServer:
+  ip: '10.100.198.201'
+
+  # User name and password used by Ansible to connect to the host for remote
+  # provisioning
+  user: 'vagrant'
+  password: 'vagrant'
+
+  # Specifies tasks within the head node provisioning not to execute, including:
+  #
+  # switch_support -   don't download the switch ONL images as there are no
+  #                    switches in this configuration
+  # interface_config - don't update the network configuration of the headnode
+  #                    as it is configured by vagrant to the proper settings
+  skipTags:
+    - 'switch_support'
+    - 'interface_config'
+
+  management_ip: '10.1.0.1/24'
+  management_iface: 'eth2'
+  external_iface: 'eth0'
+  management_network: '10.1.0.0/24'
+
+  # Specifies the extra settings required for this configuration
+  #
+  # virtualbox_support - install support for managing virtual box based
+  #                      compute nodes
+  virtualbox_support: 1
+  power_helper_user: 'cord'
+
+docker:
+  imageVersion: candidate
+
+otherServers:
+  # Specifies the configuration for dynamically added compute nodes
+  location: 'http://gerrit.opencord.org/maas'
+  rolesPath: 'roles'
+  role: 'compute-node'
+  fabric:
+    network: '10.1.1.1/24'
+    range_low: '10.1.1.2'
+    range_high: '10.1.1.253'
diff --git a/config/onlab_develop_pod.yml b/config/onlab_develop_pod.yml
new file mode 100644
index 0000000..f095e6c
--- /dev/null
+++ b/config/onlab_develop_pod.yml
@@ -0,0 +1,42 @@
+# Deployment configuration for a phyical hardware POD
+---
+seedServer:
+  ip: '10.90.0.2'
+  # User name and password used by Ansible to connect to the host for remote
+  # provisioning
+  user: 'admin'
+  password: 'onos_test'
+  # Network address information for the head node:
+  #
+  # fabric_ip     - the IP address and mask bits to be used to configure the network
+  #                 interface connected to the leaf - spine fabric
+  #
+  # management_ip - the IP address and mask bits to be used to configure the network
+  #                 interface connecting the head node to the POD internal
+  #                 management network. The head node will deliver DHCP addresses to
+  #                 the other compute nodes over this interface
+  #
+  # external_ip   - the IP address and mask bits to be used to configure the network
+  #                 interface connecting the head node (and the POD) to the
+  #                 Internet. All traffic in the POD to external hosts will be
+  #                 NAT-ed through this interface
+  fabric_ip: '10.6.1.1/24'
+  management_ip: '10.6.0.1/24'
+  external_ip: '47.135.132.21/24'
+  management_iface: 'em2'
+  external_iface: 'em1'
+  skipTags:
+    - 'interface_config'
+
+docker:
+  imageVersion: candidate
+
+otherNodes:
+  # Experimental
+  #
+  # Specifies the subnet and address range that will be used to allocate IP addresses
+  # to the compute nodes as they are deployed into the POD.
+  fabric:
+    network: 10.6.1.1/24
+    range_low: 10.6.1.2
+    range_high: 10.6.1.253