diff --git a/build.gradle b/build.gradle
new file mode 100644
index 0000000..519db66
--- /dev/null
+++ b/build.gradle
@@ -0,0 +1,117 @@
+/*
+ * Copyright 2012 the original author or authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+import org.opencord.gradle.rules.*
+import org.yaml.snakeyaml.Yaml
+
+allprojects {
+    apply plugin: 'base'
+    apply plugin: 'de.gesellix.docker'
+    //apply plugin: 'com.tmiyamon.config'
+
+    docker {
+        // dockerHost = System.env.DOCKER_HOST ?: 'unix:///var/run/docker.sock'
+        // dockerHost = System.env.DOCKER_HOST ?: 'https://192.168.99.100:2376'
+        // certPath = System.getProperty('docker.cert.path') ?: "${System.getProperty('user.home')}/.docker/machine/machines/default"
+        // authConfigPlain = [
+        //   "username"       : "joe",
+        //   "password"       : "some-pw-as-needed",
+        //   "email"          : "joe@acme.com",
+        //   "serveraddress"  : "https://index.docker.io/v1/"
+        //  ]
+    }
+}
+
+ext {
+
+    // Upstream registry to simplify filling out the comps table below
+    upstreamReg = project.hasProperty('upstreamReg') ? project.getProperty('upstreamReg') : 'docker.io'
+
+    // Target registry to be used to publish docker images needed for deployment
+    targetReg = project.hasProperty('targetReg') ? project.getProperty('targetReg') : 'localhost:5000'
+
+    // The tag used to tag the docker images push to the target registry
+    targetTag = project.hasProperty('targetTag') ? project.getProperty('targetTag') : 'candidate'
+
+    // Component table
+    comps = [
+    ]
+
+    // Deployment target config file (yaml format); this can be overwritten from the command line
+    // using the -PdeployConfig=<file-path> syntax.
+    deployConfig = project.hasProperty('deployConfig') ? project.getProperty('deployConfig') : './config/default.yml'
+
+}
+
+// ------------- PlaceHolders ----------------
+
+task updateDocker (type: Exec) {
+    commandLine 'sudo', 'utils/enable-remote-docker-registry', "$targetReg"
+}
+
+task prime {
+    // TODO this is a place-holder.
+    dependsOn updateDocker
+    doFirst {
+        println "Using deployment config: $deployConfig"
+        File configFile = new File(deployConfig)
+        def yaml = new Yaml()
+        def config = yaml.load(configFile.newReader())
+        println "Config: $config"
+        println "Access some data in config:\n\tSeed server IP=${config.seedServer.ip}"
+    }
+}
+
+// ---------------- Useful tasks ----------------
+
+task fetchUpstreamImages {
+    comps.each { name, spec -> if (spec.type == 'image') { dependsOn "fetch" + name } }
+}
+
+task fetchGitSubmodules {
+    comps.each { name, spec -> if (spec.type == 'gitmodule') { dependsOn "gitupdate" + name } }
+}
+
+task fetch {
+    dependsOn fetchUpstreamImages
+    dependsOn fetchGitSubmodules
+}
+
+task publishImages {
+    comps.each { name, spec -> if (spec.type == 'image') { dependsOn "publish" + name } }
+}
+
+task publish {
+    dependsOn publishImages
+}
+
+tasks.addRule(new DockerFetchRule(project))
+tasks.addRule(new DockerPublishRule(project))
+tasks.addRule(new DockerTagRule(project))
+tasks.addRule(new GitSubmoduleUpdateRule(project))
+
+task deploy {
+    // TODO this is a place-holder.
+    doFirst {
+        println "Using deployment config: $deployConfig"
+        File configFile = new File(deployConfig)
+        def yaml = new Yaml()
+        def config = yaml.load(configFile.newReader())
+        println "Config: $config"
+        println "Access some data in config:\n\tSeed server IP=${config.seedServer.ip}"
+    }
+}
+
diff --git a/buildSrc/build.gradle b/buildSrc/build.gradle
new file mode 100644
index 0000000..cbb6652
--- /dev/null
+++ b/buildSrc/build.gradle
@@ -0,0 +1,31 @@
+/*
+ * Copyright 2012 the original author or authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+apply plugin: 'groovy'
+
+repositories {
+    // maven { url 'https://repo.gradle.org/gradle/libs' }
+    maven { url 'https://plugins.gradle.org/m2/' }
+    // mavenCentral()
+}
+
+dependencies {
+    compile gradleApi()
+    compile localGroovy()
+    compile 'de.gesellix:gradle-docker-plugin:2016-05-05T13-15-11'
+    compile 'org.yaml:snakeyaml:1.10'
+    //compile 'gradle.plugin.com.tmiyamon:gradle-config:0.2.1'
+}
diff --git a/buildSrc/src/main/groovy/org/opencord/gradle/rules/DockerFetchRule.groovy b/buildSrc/src/main/groovy/org/opencord/gradle/rules/DockerFetchRule.groovy
new file mode 100644
index 0000000..a9bb91b
--- /dev/null
+++ b/buildSrc/src/main/groovy/org/opencord/gradle/rules/DockerFetchRule.groovy
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2012 the original author or authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package org.opencord.gradle.rules
+
+import org.gradle.api.Rule
+import de.gesellix.gradle.docker.tasks.DockerPullTask
+
+
+/**
+ * Gradle Rule class to fetch a docker image
+ */
+class DockerFetchRule implements Rule {
+
+    def project
+
+    DockerFetchRule(project) {
+        this.project = project
+    }
+
+    String getDescription() {
+        'Rule Usage: fetch<component-name>'
+    }
+
+    void apply(String taskName) {
+        if (taskName.startsWith('fetch')) {
+            project.task(taskName, type: DockerPullTask) {
+                ext.compName = taskName - 'fetch'
+                def spec = project.comps[ext.compName]
+                imageName = spec.name + '@' + spec.digest
+            }
+        }
+    }
+}
diff --git a/buildSrc/src/main/groovy/org/opencord/gradle/rules/DockerPublishRule.groovy b/buildSrc/src/main/groovy/org/opencord/gradle/rules/DockerPublishRule.groovy
new file mode 100644
index 0000000..a1d8164
--- /dev/null
+++ b/buildSrc/src/main/groovy/org/opencord/gradle/rules/DockerPublishRule.groovy
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2012 the original author or authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package org.opencord.gradle.rules
+
+import org.gradle.api.Rule
+import de.gesellix.gradle.docker.tasks.DockerPushTask
+
+
+/**
+ * Gradle Rule class to publish (push) a docker image to a private repo
+ */
+class DockerPublishRule implements Rule {
+
+    def project
+
+    DockerPublishRule(project) {
+        this.project = project
+    }
+
+    String getDescription() {
+        'Rule Usage: publish<component-name>'
+    }
+
+    void apply(String taskName) {
+        if (taskName.startsWith('publish')) {
+            project.task(taskName, type: DockerPushTask) {
+                ext.compName = taskName - 'publish'
+                println "Publish rule: $taskName + $compName"
+                def tagTask = "tag$compName"
+                println "Tagtask: $tagTask"
+                dependsOn tagTask
+                def spec = project.comps[ext.compName]
+                repositoryName = spec.name + ':' + project.targetTag
+                registry = project.targetReg
+            }
+        }
+    }
+}
diff --git a/buildSrc/src/main/groovy/org/opencord/gradle/rules/DockerTagRule.groovy b/buildSrc/src/main/groovy/org/opencord/gradle/rules/DockerTagRule.groovy
new file mode 100644
index 0000000..474e16d
--- /dev/null
+++ b/buildSrc/src/main/groovy/org/opencord/gradle/rules/DockerTagRule.groovy
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2012 the original author or authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package org.opencord.gradle.rules
+
+import org.gradle.api.Rule
+import de.gesellix.gradle.docker.tasks.DockerTagTask
+
+
+/**
+ * Gradle Rule class to tag a docker image
+ */
+class DockerTagRule implements Rule {
+
+    def project
+
+    DockerTagRule(project) {
+        this.project = project
+    }
+
+    String getDescription() {
+        'Rule Usage: tag<component-name>'
+    }
+
+    void apply(String taskName) {
+        if (taskName.startsWith('tag') && !taskName.equals('tag')) {
+            project.task(taskName, type: DockerTagTask) {
+                ext.compName = taskName - 'tag'
+                def spec = project.comps[compName]
+                imageId = spec.name + '@' + spec.digest
+                tag = compName + ':' + project.targetTag
+            }
+        }
+    }
+}
diff --git a/buildSrc/src/main/groovy/org/opencord/gradle/rules/GitSubmoduleUpdateRule.groovy b/buildSrc/src/main/groovy/org/opencord/gradle/rules/GitSubmoduleUpdateRule.groovy
new file mode 100644
index 0000000..3b46424
--- /dev/null
+++ b/buildSrc/src/main/groovy/org/opencord/gradle/rules/GitSubmoduleUpdateRule.groovy
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2012 the original author or authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package org.opencord.gradle.rules
+
+import org.gradle.api.Rule
+import org.gradle.api.tasks.Exec
+
+
+/**
+ * Gradle Rule class to fetch a docker image
+ */
+class GitSubmoduleUpdateRule implements Rule {
+
+    def project
+
+    GitSubmoduleUpdateRule(project) {
+        this.project = project
+    }
+
+    String getDescription() {
+        'Rule Usage: gitupdate<component-name>'
+    }
+
+    void apply(String taskName) {
+        if (taskName.startsWith('gitupdate')) {
+            project.task(taskName, type: Exec) {
+                ext.compName = taskName - 'gitupdate'
+                def spec = project.comps[ext.compName]
+                workingDir = '.'
+                commandLine '/usr/bin/git', 'submodule', 'update', '--init', '--recursive', spec.componentDir
+            }
+        }
+    }
+}
diff --git a/config/default.yml b/config/default.yml
new file mode 100644
index 0000000..0be591e
--- /dev/null
+++ b/config/default.yml
@@ -0,0 +1,47 @@
+# Deployment configuration for VirtualBox based head node.
+#
+# This deployment configuration can be utilized with the head node created
+# via `vargrant up headnode` from the gerrit.opencord.org/maas repository.
+---
+seedServer:
+  ip: '10.100.198.201'
+
+  # User name and password used by Ansible to connect to the host for remote
+  # provisioning
+  user: 'vagrant'
+  password: 'vagrant'
+
+  # Specifies tasks within the head node provisioning not to execute, including:
+  #
+  # switch_support -   don't download the switch ONL images as there are no
+  #                    switches in this configuration
+  # interface_config - don't update the network configuration of the headnode
+  #                    as it is configured by vagrant to the proper settings
+  skipTags:
+    - 'switch_support'
+    - 'interface_config'
+
+  management_ip: '10.1.0.1/24'
+  management_iface: 'eth2'
+  external_iface: 'eth0'
+  management_network: '10.1.0.0/24'
+
+  # Specifies the extra settings required for this configuration
+  #
+  # virtualbox_support - install support for managing virtual box based
+  #                      compute nodes
+  virtualbox_support: 1
+  power_helper_user: 'cord'
+
+docker:
+  imageVersion: candidate
+
+otherServers:
+  # Specifies the configuration for dynamically added compute nodes
+  location: 'http://gerrit.opencord.org/maas'
+  rolesPath: 'roles'
+  role: 'compute-node'
+  fabric:
+    network: '10.1.1.1/24'
+    range_low: '10.1.1.2'
+    range_high: '10.1.1.253'
diff --git a/config/onlab_develop_pod.yml b/config/onlab_develop_pod.yml
new file mode 100644
index 0000000..f095e6c
--- /dev/null
+++ b/config/onlab_develop_pod.yml
@@ -0,0 +1,42 @@
+# Deployment configuration for a phyical hardware POD
+---
+seedServer:
+  ip: '10.90.0.2'
+  # User name and password used by Ansible to connect to the host for remote
+  # provisioning
+  user: 'admin'
+  password: 'onos_test'
+  # Network address information for the head node:
+  #
+  # fabric_ip     - the IP address and mask bits to be used to configure the network
+  #                 interface connected to the leaf - spine fabric
+  #
+  # management_ip - the IP address and mask bits to be used to configure the network
+  #                 interface connecting the head node to the POD internal
+  #                 management network. The head node will deliver DHCP addresses to
+  #                 the other compute nodes over this interface
+  #
+  # external_ip   - the IP address and mask bits to be used to configure the network
+  #                 interface connecting the head node (and the POD) to the
+  #                 Internet. All traffic in the POD to external hosts will be
+  #                 NAT-ed through this interface
+  fabric_ip: '10.6.1.1/24'
+  management_ip: '10.6.0.1/24'
+  external_ip: '47.135.132.21/24'
+  management_iface: 'em2'
+  external_iface: 'em1'
+  skipTags:
+    - 'interface_config'
+
+docker:
+  imageVersion: candidate
+
+otherNodes:
+  # Experimental
+  #
+  # Specifies the subnet and address range that will be used to allocate IP addresses
+  # to the compute nodes as they are deployed into the POD.
+  fabric:
+    network: 10.6.1.1/24
+    range_low: 10.6.1.2
+    range_high: 10.6.1.253
diff --git a/gradle.properties b/gradle.properties
new file mode 100644
index 0000000..1a644c7
--- /dev/null
+++ b/gradle.properties
@@ -0,0 +1 @@
+org.gradle.daemon=true
diff --git a/gradle/wrapper/gradle-wrapper.jar b/gradle/wrapper/gradle-wrapper.jar
new file mode 100644
index 0000000..2c6137b
--- /dev/null
+++ b/gradle/wrapper/gradle-wrapper.jar
Binary files differ
diff --git a/gradle/wrapper/gradle-wrapper.properties b/gradle/wrapper/gradle-wrapper.properties
new file mode 100644
index 0000000..cf051c0
--- /dev/null
+++ b/gradle/wrapper/gradle-wrapper.properties
@@ -0,0 +1,6 @@
+#Thu May 05 16:09:18 PDT 2016
+distributionBase=GRADLE_USER_HOME
+distributionPath=wrapper/dists
+zipStoreBase=GRADLE_USER_HOME
+zipStorePath=wrapper/dists
+distributionUrl=https\://services.gradle.org/distributions/gradle-2.13-all.zip
diff --git a/gradlew b/gradlew
new file mode 100755
index 0000000..9d82f78
--- /dev/null
+++ b/gradlew
@@ -0,0 +1,160 @@
+#!/usr/bin/env bash
+
+##############################################################################
+##
+##  Gradle start up script for UN*X
+##
+##############################################################################
+
+# Add default JVM options here. You can also use JAVA_OPTS and GRADLE_OPTS to pass JVM options to this script.
+DEFAULT_JVM_OPTS=""
+
+APP_NAME="Gradle"
+APP_BASE_NAME=`basename "$0"`
+
+# Use the maximum available, or set MAX_FD != -1 to use that value.
+MAX_FD="maximum"
+
+warn ( ) {
+    echo "$*"
+}
+
+die ( ) {
+    echo
+    echo "$*"
+    echo
+    exit 1
+}
+
+# OS specific support (must be 'true' or 'false').
+cygwin=false
+msys=false
+darwin=false
+case "`uname`" in
+  CYGWIN* )
+    cygwin=true
+    ;;
+  Darwin* )
+    darwin=true
+    ;;
+  MINGW* )
+    msys=true
+    ;;
+esac
+
+# Attempt to set APP_HOME
+# Resolve links: $0 may be a link
+PRG="$0"
+# Need this for relative symlinks.
+while [ -h "$PRG" ] ; do
+    ls=`ls -ld "$PRG"`
+    link=`expr "$ls" : '.*-> \(.*\)$'`
+    if expr "$link" : '/.*' > /dev/null; then
+        PRG="$link"
+    else
+        PRG=`dirname "$PRG"`"/$link"
+    fi
+done
+SAVED="`pwd`"
+cd "`dirname \"$PRG\"`/" >/dev/null
+APP_HOME="`pwd -P`"
+cd "$SAVED" >/dev/null
+
+CLASSPATH=$APP_HOME/gradle/wrapper/gradle-wrapper.jar
+
+# Determine the Java command to use to start the JVM.
+if [ -n "$JAVA_HOME" ] ; then
+    if [ -x "$JAVA_HOME/jre/sh/java" ] ; then
+        # IBM's JDK on AIX uses strange locations for the executables
+        JAVACMD="$JAVA_HOME/jre/sh/java"
+    else
+        JAVACMD="$JAVA_HOME/bin/java"
+    fi
+    if [ ! -x "$JAVACMD" ] ; then
+        die "ERROR: JAVA_HOME is set to an invalid directory: $JAVA_HOME
+
+Please set the JAVA_HOME variable in your environment to match the
+location of your Java installation."
+    fi
+else
+    JAVACMD="java"
+    which java >/dev/null 2>&1 || die "ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH.
+
+Please set the JAVA_HOME variable in your environment to match the
+location of your Java installation."
+fi
+
+# Increase the maximum file descriptors if we can.
+if [ "$cygwin" = "false" -a "$darwin" = "false" ] ; then
+    MAX_FD_LIMIT=`ulimit -H -n`
+    if [ $? -eq 0 ] ; then
+        if [ "$MAX_FD" = "maximum" -o "$MAX_FD" = "max" ] ; then
+            MAX_FD="$MAX_FD_LIMIT"
+        fi
+        ulimit -n $MAX_FD
+        if [ $? -ne 0 ] ; then
+            warn "Could not set maximum file descriptor limit: $MAX_FD"
+        fi
+    else
+        warn "Could not query maximum file descriptor limit: $MAX_FD_LIMIT"
+    fi
+fi
+
+# For Darwin, add options to specify how the application appears in the dock
+if $darwin; then
+    GRADLE_OPTS="$GRADLE_OPTS \"-Xdock:name=$APP_NAME\" \"-Xdock:icon=$APP_HOME/media/gradle.icns\""
+fi
+
+# For Cygwin, switch paths to Windows format before running java
+if $cygwin ; then
+    APP_HOME=`cygpath --path --mixed "$APP_HOME"`
+    CLASSPATH=`cygpath --path --mixed "$CLASSPATH"`
+    JAVACMD=`cygpath --unix "$JAVACMD"`
+
+    # We build the pattern for arguments to be converted via cygpath
+    ROOTDIRSRAW=`find -L / -maxdepth 1 -mindepth 1 -type d 2>/dev/null`
+    SEP=""
+    for dir in $ROOTDIRSRAW ; do
+        ROOTDIRS="$ROOTDIRS$SEP$dir"
+        SEP="|"
+    done
+    OURCYGPATTERN="(^($ROOTDIRS))"
+    # Add a user-defined pattern to the cygpath arguments
+    if [ "$GRADLE_CYGPATTERN" != "" ] ; then
+        OURCYGPATTERN="$OURCYGPATTERN|($GRADLE_CYGPATTERN)"
+    fi
+    # Now convert the arguments - kludge to limit ourselves to /bin/sh
+    i=0
+    for arg in "$@" ; do
+        CHECK=`echo "$arg"|egrep -c "$OURCYGPATTERN" -`
+        CHECK2=`echo "$arg"|egrep -c "^-"`                                 ### Determine if an option
+
+        if [ $CHECK -ne 0 ] && [ $CHECK2 -eq 0 ] ; then                    ### Added a condition
+            eval `echo args$i`=`cygpath --path --ignore --mixed "$arg"`
+        else
+            eval `echo args$i`="\"$arg\""
+        fi
+        i=$((i+1))
+    done
+    case $i in
+        (0) set -- ;;
+        (1) set -- "$args0" ;;
+        (2) set -- "$args0" "$args1" ;;
+        (3) set -- "$args0" "$args1" "$args2" ;;
+        (4) set -- "$args0" "$args1" "$args2" "$args3" ;;
+        (5) set -- "$args0" "$args1" "$args2" "$args3" "$args4" ;;
+        (6) set -- "$args0" "$args1" "$args2" "$args3" "$args4" "$args5" ;;
+        (7) set -- "$args0" "$args1" "$args2" "$args3" "$args4" "$args5" "$args6" ;;
+        (8) set -- "$args0" "$args1" "$args2" "$args3" "$args4" "$args5" "$args6" "$args7" ;;
+        (9) set -- "$args0" "$args1" "$args2" "$args3" "$args4" "$args5" "$args6" "$args7" "$args8" ;;
+    esac
+fi
+
+# Split up the JVM_OPTS And GRADLE_OPTS values into an array, following the shell quoting and substitution rules
+function splitJvmOpts() {
+    JVM_OPTS=("$@")
+}
+eval splitJvmOpts $DEFAULT_JVM_OPTS $JAVA_OPTS $GRADLE_OPTS
+JVM_OPTS[${#JVM_OPTS[*]}]="-Dorg.gradle.appname=$APP_BASE_NAME"
+
+exec "$JAVACMD" "${JVM_OPTS[@]}" -classpath "$CLASSPATH" org.gradle.wrapper.GradleWrapperMain "$@"
diff --git a/gradlew.bat b/gradlew.bat
new file mode 100644
index 0000000..72d362d
--- /dev/null
+++ b/gradlew.bat
@@ -0,0 +1,90 @@
+@if "%DEBUG%" == "" @echo off
+@rem ##########################################################################
+@rem
+@rem  Gradle startup script for Windows
+@rem
+@rem ##########################################################################
+
+@rem Set local scope for the variables with windows NT shell
+if "%OS%"=="Windows_NT" setlocal
+
+@rem Add default JVM options here. You can also use JAVA_OPTS and GRADLE_OPTS to pass JVM options to this script.
+set DEFAULT_JVM_OPTS=
+
+set DIRNAME=%~dp0
+if "%DIRNAME%" == "" set DIRNAME=.
+set APP_BASE_NAME=%~n0
+set APP_HOME=%DIRNAME%
+
+@rem Find java.exe
+if defined JAVA_HOME goto findJavaFromJavaHome
+
+set JAVA_EXE=java.exe
+%JAVA_EXE% -version >NUL 2>&1
+if "%ERRORLEVEL%" == "0" goto init
+
+echo.
+echo ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH.
+echo.
+echo Please set the JAVA_HOME variable in your environment to match the
+echo location of your Java installation.
+
+goto fail
+
+:findJavaFromJavaHome
+set JAVA_HOME=%JAVA_HOME:"=%
+set JAVA_EXE=%JAVA_HOME%/bin/java.exe
+
+if exist "%JAVA_EXE%" goto init
+
+echo.
+echo ERROR: JAVA_HOME is set to an invalid directory: %JAVA_HOME%
+echo.
+echo Please set the JAVA_HOME variable in your environment to match the
+echo location of your Java installation.
+
+goto fail
+
+:init
+@rem Get command-line arguments, handling Windows variants
+
+if not "%OS%" == "Windows_NT" goto win9xME_args
+if "%@eval[2+2]" == "4" goto 4NT_args
+
+:win9xME_args
+@rem Slurp the command line arguments.
+set CMD_LINE_ARGS=
+set _SKIP=2
+
+:win9xME_args_slurp
+if "x%~1" == "x" goto execute
+
+set CMD_LINE_ARGS=%*
+goto execute
+
+:4NT_args
+@rem Get arguments from the 4NT Shell from JP Software
+set CMD_LINE_ARGS=%$
+
+:execute
+@rem Setup the command line
+
+set CLASSPATH=%APP_HOME%\gradle\wrapper\gradle-wrapper.jar
+
+@rem Execute Gradle
+"%JAVA_EXE%" %DEFAULT_JVM_OPTS% %JAVA_OPTS% %GRADLE_OPTS% "-Dorg.gradle.appname=%APP_BASE_NAME%" -classpath "%CLASSPATH%" org.gradle.wrapper.GradleWrapperMain %CMD_LINE_ARGS%
+
+:end
+@rem End local scope for the variables with windows NT shell
+if "%ERRORLEVEL%"=="0" goto mainEnd
+
+:fail
+rem Set variable GRADLE_EXIT_CONSOLE if you need the _script_ return code instead of
+rem the _cmd.exe /c_ return code!
+if  not "" == "%GRADLE_EXIT_CONSOLE%" exit 1
+exit /b 1
+
+:mainEnd
+if "%OS%"=="Windows_NT" endlocal
+
+:omega