use cig olt on pod1
Change-Id: I97a15f80a5362b7ea28c8ea70c8f2b4fb0760a65
diff --git a/tosca-configs/att-workflow/onlab-pod1-cig.yaml b/tosca-configs/att-workflow/onlab-pod1-cig.yaml
deleted file mode 100755
index 1e47e3d..0000000
--- a/tosca-configs/att-workflow/onlab-pod1-cig.yaml
+++ /dev/null
@@ -1,100 +0,0 @@
-# Copyright 2017-present Open Networking Foundation
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @onlab-pod1-cig.yaml http://10.90.0.101:30007/run
-
-tosca_definitions_version: tosca_simple_yaml_1_0
-imports:
- - custom_types/oltdevice.yaml
- - custom_types/onudevice.yaml
- - custom_types/voltservice.yaml
- - custom_types/attworkflowdriverwhitelistentry.yaml
- - custom_types/attworkflowdriverservice.yaml
- - custom_types/rcordsubscriber.yaml
- - custom_types/switch.yaml
- - custom_types/switchport.yaml
-description: Create a simulated OLT Device in VOLTHA
-topology_template:
- node_templates:
-
- service#volt:
- type: tosca.nodes.VOLTService
- properties:
- name: volt
- must-exist: true
-
- # CIG
- olt_device:
- type: tosca.nodes.OLTDevice
- properties:
- name: CIG
- device_type: openolt
- host: 10.90.0.115
- port: 10400
- switch_datapath_id: of:0000000000000001
- switch_port: "4"
- outer_tpid: "0x8100"
- uplink: "65536"
- nas_id: "NAS_ID"
- requirements:
- - volt_service:
- node: service#volt
- relationship: tosca.relationships.BelongsToOne
-
- # Whitelist
- service#att:
- type: tosca.nodes.AttWorkflowDriverService
- properties:
- name: att-workflow-driver
- must-exist: true
-
- CIG:
- type: tosca.nodes.AttWorkflowDriverWhiteListEntry
- properties:
- serial_number: CIGG70606829
- pon_port_id: 536870913
- device_id: of:000000000a5a0073
- requirements:
- - owner:
- node: service#att
- relationship: tosca.relationships.BelongsToOne
-
- # Pre-provision the subscriber
- cig_subscriber_1:
- type: tosca.nodes.RCORDSubscriber
- properties:
- name: Sub_CIGG70606829
- status: pre-provisioned
- c_tag: 444
- s_tag: 444
- onu_device: CIGG70606829
- nas_port_id : "PON 1/1/03/1:1.1.1"
- circuit_id: foo1
- remote_id: bar1
-
- switch#leaf_1:
- type: tosca.nodes.Switch
- properties:
- name: AGG_SWITCH
- must-exist: true
-
- port#cig_olt_port:
- type: tosca.nodes.SwitchPort
- properties:
- portId: 4
- host_learning: false
- requirements:
- - switch:
- node: switch#leaf_1
- relationship: tosca.relationships.BelongsToOne
\ No newline at end of file
diff --git a/tosca-configs/att-workflow/onlab-pod1-edgecore.yaml b/tosca-configs/att-workflow/onlab-pod1-edgecore.yaml
new file mode 100755
index 0000000..8e0daf5
--- /dev/null
+++ b/tosca-configs/att-workflow/onlab-pod1-edgecore.yaml
@@ -0,0 +1,47 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @onlab-pod1-edgecore.yaml http://10.90.0.101:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/oltdevice.yaml
+ - custom_types/onudevice.yaml
+ - custom_types/voltservice.yaml
+description: Create a simulated OLT Device in VOLTHA
+topology_template:
+ node_templates:
+
+ service#volt:
+ type: tosca.nodes.VOLTService
+ properties:
+ name: volt
+ must-exist: true
+
+ olt_device:
+ type: tosca.nodes.OLTDevice
+ properties:
+ name: ONF OLT
+ device_type: openolt
+ host: 10.90.0.114
+ port: 9191
+ switch_datapath_id: of:0000000000000001
+ switch_port: "1"
+ outer_tpid: "0x8100"
+ uplink: "65536"
+ nas_id: "NAS_ID"
+ requirements:
+ - volt_service:
+ node: service#volt
+ relationship: tosca.relationships.BelongsToOne
diff --git a/tosca-configs/att-workflow/onlab-pod1-olt.yaml b/tosca-configs/att-workflow/onlab-pod1-olt.yaml
index bcfa161..c94b5e1 100755
--- a/tosca-configs/att-workflow/onlab-pod1-olt.yaml
+++ b/tosca-configs/att-workflow/onlab-pod1-olt.yaml
@@ -19,6 +19,11 @@
- custom_types/oltdevice.yaml
- custom_types/onudevice.yaml
- custom_types/voltservice.yaml
+ - custom_types/attworkflowdriverwhitelistentry.yaml
+ - custom_types/attworkflowdriverservice.yaml
+ - custom_types/rcordsubscriber.yaml
+ - custom_types/switch.yaml
+ - custom_types/switchport.yaml
description: Create a simulated OLT Device in VOLTHA
topology_template:
node_templates:
@@ -29,15 +34,16 @@
name: volt
must-exist: true
+ # CIG
olt_device:
type: tosca.nodes.OLTDevice
properties:
- name: ONF OLT
+ name: CIG
device_type: openolt
- host: 10.90.0.114
- port: 9191
+ host: 10.90.0.115
+ port: 10400
switch_datapath_id: of:0000000000000001
- switch_port: "1"
+ switch_port: "4"
outer_tpid: "0x8100"
uplink: "65536"
nas_id: "NAS_ID"
@@ -45,3 +51,50 @@
- volt_service:
node: service#volt
relationship: tosca.relationships.BelongsToOne
+
+ # Whitelist
+ service#att:
+ type: tosca.nodes.AttWorkflowDriverService
+ properties:
+ name: att-workflow-driver
+ must-exist: true
+
+ CIG:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: CIGG70606829
+ pon_port_id: 536870913
+ device_id: of:000000000a5a0073
+ requirements:
+ - owner:
+ node: service#att
+ relationship: tosca.relationships.BelongsToOne
+
+ # Pre-provision the subscriber
+ cig_subscriber_1:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: Sub_CIGG70606829
+ status: pre-provisioned
+ c_tag: 444
+ s_tag: 444
+ onu_device: CIGG70606829
+ nas_port_id : "PON 1/1/03/1:1.1.1"
+ circuit_id: foo1
+ remote_id: bar1
+
+ switch#leaf_1:
+ type: tosca.nodes.Switch
+ properties:
+ name: AGG_SWITCH
+ must-exist: true
+
+ port#cig_olt_port:
+ type: tosca.nodes.SwitchPort
+ properties:
+ portId: 4
+ host_learning: false
+ requirements:
+ - switch:
+ node: switch#leaf_1
+ relationship: tosca.relationships.BelongsToOne
\ No newline at end of file