BBsim TOSCA
Change-Id: I789967d12cb71ff83f4bafeb7a2e807bab36abb7
diff --git a/tosca-configs/bbsim/onlab-pod2-bbsim-16.yaml b/tosca-configs/bbsim/onlab-pod2-bbsim-16.yaml
new file mode 100644
index 0000000..0d27f4b
--- /dev/null
+++ b/tosca-configs/bbsim/onlab-pod2-bbsim-16.yaml
@@ -0,0 +1,430 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @onlab-pod2-bbsim-16.yaml http://10.90.0.120:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/oltdevice.yaml
+ - custom_types/onudevice.yaml
+ - custom_types/voltservice.yaml
+ - custom_types/bngportmapping.yaml
+ - custom_types/attworkflowdriverwhitelistentry.yaml
+ - custom_types/attworkflowdriverservice.yaml
+ - custom_types/rcordsubscriber.yaml
+ - custom_types/serviceinstanceattribute.yaml
+ - custom_types/onosapp.yaml
+description: Create a simulated OLT Device in VOLTHA
+topology_template:
+ node_templates:
+
+ service#volt:
+ type: tosca.nodes.VOLTService
+ properties:
+ name: volt
+ must-exist: true
+
+ olt_device:
+ type: tosca.nodes.OLTDevice
+ properties:
+ name: BBSIM_OLT
+ device_type: bbsimolt
+ host: bbsim.voltha.svc
+ port: 50060
+ switch_datapath_id: of:0000000000000002
+ switch_port: "3"
+ outer_tpid: "0x8100"
+ uplink: "65536"
+ nas_id: "NAS_ID"
+ serial_number: "bbsim.voltha.svc:50060"
+ requirements:
+ - volt_service:
+ node: service#volt
+ relationship: tosca.relationships.BelongsToOne
+
+ # Whitelist
+ service#att:
+ type: tosca.nodes.AttWorkflowDriverService
+ properties:
+ name: att-workflow-driver
+ must-exist: true
+
+ BBSM00000100:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: BBSM00000100
+ pon_port_id: 536870913
+ device_id: of:0000000000000012
+ requirements:
+ - owner:
+ node: service#att
+ relationship: tosca.relationships.BelongsToOne
+
+ BBSM00000101:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: BBSM00000101
+ pon_port_id: 536870913
+ device_id: of:0000000000000012
+ requirements:
+ - owner:
+ node: service#att
+ relationship: tosca.relationships.BelongsToOne
+
+ BBSM00000102:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: BBSM00000102
+ pon_port_id: 536870913
+ device_id: of:0000000000000012
+ requirements:
+ - owner:
+ node: service#att
+ relationship: tosca.relationships.BelongsToOne
+
+ BBSM00000103:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: BBSM00000103
+ pon_port_id: 536870913
+ device_id: of:0000000000000012
+ requirements:
+ - owner:
+ node: service#att
+ relationship: tosca.relationships.BelongsToOne
+
+ BBSM00000104:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: BBSM00000104
+ pon_port_id: 536870913
+ device_id: of:0000000000000012
+ requirements:
+ - owner:
+ node: service#att
+ relationship: tosca.relationships.BelongsToOne
+
+ BBSM00000105:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: BBSM00000105
+ pon_port_id: 536870913
+ device_id: of:0000000000000012
+ requirements:
+ - owner:
+ node: service#att
+ relationship: tosca.relationships.BelongsToOne
+
+ BBSM00000106:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: BBSM00000106
+ pon_port_id: 536870913
+ device_id: of:0000000000000012
+ requirements:
+ - owner:
+ node: service#att
+ relationship: tosca.relationships.BelongsToOne
+
+ BBSM00000107:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: BBSM00000107
+ pon_port_id: 536870913
+ device_id: of:0000000000000012
+ requirements:
+ - owner:
+ node: service#att
+ relationship: tosca.relationships.BelongsToOne
+
+ BBSM00000108:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: BBSM00000108
+ pon_port_id: 536870913
+ device_id: of:0000000000000012
+ requirements:
+ - owner:
+ node: service#att
+ relationship: tosca.relationships.BelongsToOne
+
+ BBSM00000109:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: BBSM00000109
+ pon_port_id: 536870913
+ device_id: of:0000000000000012
+ requirements:
+ - owner:
+ node: service#att
+ relationship: tosca.relationships.BelongsToOne
+
+ BBSM0000010a:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: BBSM0000010a
+ pon_port_id: 536870913
+ device_id: of:0000000000000012
+ requirements:
+ - owner:
+ node: service#att
+ relationship: tosca.relationships.BelongsToOne
+
+ BBSM0000010b:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: BBSM0000010b
+ pon_port_id: 536870913
+ device_id: of:0000000000000012
+ requirements:
+ - owner:
+ node: service#att
+ relationship: tosca.relationships.BelongsToOne
+
+ BBSM0000010c:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: BBSM0000010c
+ pon_port_id: 536870913
+ device_id: of:0000000000000012
+ requirements:
+ - owner:
+ node: service#att
+ relationship: tosca.relationships.BelongsToOne
+
+ BBSM0000010d:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: BBSM0000010d
+ pon_port_id: 536870913
+ device_id: of:0000000000000012
+ requirements:
+ - owner:
+ node: service#att
+ relationship: tosca.relationships.BelongsToOne
+
+ BBSM0000010e:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: BBSM0000010e
+ pon_port_id: 536870913
+ device_id: of:0000000000000012
+ requirements:
+ - owner:
+ node: service#att
+ relationship: tosca.relationships.BelongsToOne
+
+ BBSM0000010f:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: BBSM0000010f
+ pon_port_id: 536870913
+ device_id: of:0000000000000012
+ requirements:
+ - owner:
+ node: service#att
+ relationship: tosca.relationships.BelongsToOne
+
+ # Pre-provision the subscriber
+ bbsim_subscriber_0:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: Sub_BBSM00000100
+ status: pre-provisioned
+ c_tag: 900
+ s_tag: 999
+ onu_device: BBSM00000100
+ circuit_id: circuit0
+ remote_id: remote0
+ nas_port_id: PON 2/1/01/1:1.1.0
+
+ bbsim_subscriber_1:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: Sub_BBSM00000101
+ status: pre-provisioned
+ c_tag: 901
+ s_tag: 999
+ onu_device: BBSM00000101
+ circuit_id: circuit1
+ remote_id: remote1
+ nas_port_id: PON 2/1/01/1:1.1.1
+
+ bbsim_subscriber_2:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: Sub_BBSM00000102
+ status: pre-provisioned
+ c_tag: 902
+ s_tag: 999
+ onu_device: BBSM00000102
+ circuit_id: circuit2
+ remote_id: remote2
+ nas_port_id: PON 2/1/01/1:1.1.2
+
+ bbsim_subscriber_3:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: Sub_BBSM00000103
+ status: pre-provisioned
+ c_tag: 903
+ s_tag: 999
+ onu_device: BBSM00000103
+ circuit_id: circuit3
+ remote_id: remote3
+ nas_port_id: PON 2/1/01/1:1.1.3
+
+ bbsim_subscriber_4:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: Sub_BBSM00000104
+ status: pre-provisioned
+ c_tag: 904
+ s_tag: 999
+ onu_device: BBSM00000104
+ circuit_id: circuit4
+ remote_id: remote4
+ nas_port_id: PON 2/1/01/1:1.1.4
+
+ bbsim_subscriber_5:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: Sub_BBSM00000105
+ status: pre-provisioned
+ c_tag: 905
+ s_tag: 999
+ onu_device: BBSM00000105
+ circuit_id: circuit5
+ remote_id: remote5
+ nas_port_id: PON 2/1/01/1:1.1.5
+
+ bbsim_subscriber_6:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: Sub_BBSM00000106
+ status: pre-provisioned
+ c_tag: 906
+ s_tag: 999
+ onu_device: BBSM00000106
+ circuit_id: circuit6
+ remote_id: remote6
+ nas_port_id: PON 2/1/01/1:1.1.6
+
+ bbsim_subscriber_7:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: Sub_BBSM00000107
+ status: pre-provisioned
+ c_tag: 907
+ s_tag: 999
+ onu_device: BBSM00000107
+ circuit_id: circuit7
+ remote_id: remote7
+ nas_port_id: PON 2/1/01/1:1.1.7
+
+ bbsim_subscriber_8:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: Sub_BBSM00000108
+ status: pre-provisioned
+ c_tag: 908
+ s_tag: 999
+ onu_device: BBSM00000108
+ circuit_id: circuit8
+ remote_id: remote8
+ nas_port_id: PON 2/1/01/1:1.1.8
+
+ bbsim_subscriber_9:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: Sub_BBSM00000109
+ status: pre-provisioned
+ c_tag: 909
+ s_tag: 999
+ onu_device: BBSM00000109
+ circuit_id: circuit9
+ remote_id: remote9
+ nas_port_id: PON 2/1/01/1:1.1.9
+
+ bbsim_subscriber_a:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: Sub_BBSM0000010a
+ status: pre-provisioned
+ c_tag: 910
+ s_tag: 999
+ onu_device: BBSM0000010a
+ circuit_id: circuit10a
+ remote_id: remote10a
+ nas_port_id: PON 2/1/01/1:1.1.10a
+
+ bbsim_subscriber_b:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: Sub_BBSM0000010b
+ status: pre-provisioned
+ c_tag: 911
+ s_tag: 999
+ onu_device: BBSM0000010b
+ circuit_id: circuit10b
+ remote_id: remote10b
+ nas_port_id: PON 2/1/01/1:1.1.10b
+
+ bbsim_subscriber_c:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: Sub_BBSM0000010c
+ status: pre-provisioned
+ c_tag: 912
+ s_tag: 999
+ onu_device: BBSM0000010c
+ circuit_id: circuit10c
+ remote_id: remote10c
+ nas_port_id: PON 2/1/01/1:1.1.10c
+
+ bbsim_subscriber_d:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: Sub_BBSM0000010d
+ status: pre-provisioned
+ c_tag: 913
+ s_tag: 999
+ onu_device: BBSM0000010d
+ circuit_id: circuit10d
+ remote_id: remote10d
+ nas_port_id: PON 2/1/01/1:1.1.10d
+
+ bbsim_subscriber_e:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: Sub_BBSM0000010e
+ status: pre-provisioned
+ c_tag: 914
+ s_tag: 999
+ onu_device: BBSM0000010e
+ circuit_id: circuit10e
+ remote_id: remote10e
+ nas_port_id: PON 2/1/01/1:1.1.10e
+
+ bbsim_subscriber_f:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: Sub_BBSM0000010f
+ status: pre-provisioned
+ c_tag: 915
+ s_tag: 999
+ onu_device: BBSM0000010f
+ circuit_id: circuit10f
+ remote_id: remote10f
+ nas_port_id: PON 2/1/01/1:1.1.10f
diff --git a/tosca-configs/bbsim/onlab-pod2-bbsim-2.yaml b/tosca-configs/bbsim/onlab-pod2-bbsim-2.yaml
new file mode 100644
index 0000000..b5dd3cf
--- /dev/null
+++ b/tosca-configs/bbsim/onlab-pod2-bbsim-2.yaml
@@ -0,0 +1,124 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @onlab-pod2-bbsim-2.yaml http://10.90.0.120:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/oltdevice.yaml
+ - custom_types/onudevice.yaml
+ - custom_types/voltservice.yaml
+ - custom_types/bngportmapping.yaml
+ - custom_types/attworkflowdriverwhitelistentry.yaml
+ - custom_types/attworkflowdriverservice.yaml
+ - custom_types/rcordsubscriber.yaml
+ - custom_types/serviceinstanceattribute.yaml
+ - custom_types/onosapp.yaml
+description: Create a simulated OLT Device in VOLTHA
+topology_template:
+ node_templates:
+
+ service#volt:
+ type: tosca.nodes.VOLTService
+ properties:
+ name: volt
+ must-exist: true
+
+ olt_device:
+ type: tosca.nodes.OLTDevice
+ properties:
+ name: BBSIM_OLT
+ device_type: bbsimolt
+ host: bbsim.voltha.svc
+ port: 50060
+ switch_datapath_id: of:0000000000000002
+ switch_port: "3"
+ outer_tpid: "0x8100"
+ uplink: "65536"
+ nas_id: "NAS_ID"
+ serial_number: "bbsim.voltha.svc:50060"
+ requirements:
+ - volt_service:
+ node: service#volt
+ relationship: tosca.relationships.BelongsToOne
+
+ # link
+ onos_app#olt:
+ type: tosca.nodes.ONOSApp
+ properties:
+ name: olt
+ must-exist: true
+
+ olt-config-attr:
+ type: tosca.nodes.ServiceInstanceAttribute
+ properties:
+ name: /onos/v1/network/configuration/links
+ value: >
+ {
+ "of:0000000000000002/24-of:0000000000000012/65536": {
+ "basic": {}
+ }
+ }
+ requirements:
+ - service_instance:
+ node: onos_app#olt
+ relationship: tosca.relationships.BelongsToOne
+
+ # Whitelist
+ service#att:
+ type: tosca.nodes.AttWorkflowDriverService
+ properties:
+ name: att-workflow-driver
+ must-exist: true
+
+ BBSM00000100:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: BBSM00000100
+ pon_port_id: 536870913
+ device_id: of:0000000000000012
+ requirements:
+ - owner:
+ node: service#att
+ relationship: tosca.relationships.BelongsToOne
+
+ BBSM00000101:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: BBSM00000101
+ pon_port_id: 536870913
+ device_id: of:0000000000000012
+ requirements:
+ - owner:
+ node: service#att
+ relationship: tosca.relationships.BelongsToOne
+
+ # Pre-provision the subscriber
+ bbsim_subscriber_0:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: Sub_BBSM00000100
+ status: pre-provisioned
+ c_tag: 900
+ s_tag: 999
+ onu_device: BBSM00000100
+
+ bbsim_subscriber_1:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: Sub_BBSM00000101
+ status: pre-provisioned
+ c_tag: 901
+ s_tag: 999
+ onu_device: BBSM00000101