Adding shad olt to TOSCA
Change-Id: I9c579b435464fe93145f464cbd4d529759ea516b
diff --git a/tosca-configs/att-workflow/onlab-pod1-fabric.yaml b/tosca-configs/att-workflow/onlab-pod1-fabric.yaml
index a80552e..3386c33 100755
--- a/tosca-configs/att-workflow/onlab-pod1-fabric.yaml
+++ b/tosca-configs/att-workflow/onlab-pod1-fabric.yaml
@@ -88,28 +88,6 @@
node: service#att
relationship: tosca.relationships.BelongsToOne
- ALPHe3d1cfe3:
- type: tosca.nodes.AttWorkflowDriverWhiteListEntry
- properties:
- serial_number: ALPHe3d1cfe3
- pon_port_id: 536870912
- device_id: of:000000000a5a0097
- requirements:
- - owner:
- node: service#att
- relationship: tosca.relationships.BelongsToOne
-
- ISKT71E80080:
- type: tosca.nodes.AttWorkflowDriverWhiteListEntry
- properties:
- serial_number: ISKT71E80080
- pon_port_id: 536870912
- device_id: of:000000000a5a0097
- requirements:
- - owner:
- node: service#att
- relationship: tosca.relationships.BelongsToOne
-
ALPHe3d1cfde:
type: tosca.nodes.AttWorkflowDriverWhiteListEntry
properties:
diff --git a/tosca-configs/att-workflow/onlab-pod1-shad.yaml b/tosca-configs/att-workflow/onlab-pod1-shad.yaml
new file mode 100755
index 0000000..aa2991d
--- /dev/null
+++ b/tosca-configs/att-workflow/onlab-pod1-shad.yaml
@@ -0,0 +1,96 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @onlab-pod1-olt.yaml http://10.90.0.101:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/oltdevice.yaml
+ - custom_types/onudevice.yaml
+ - custom_types/voltservice.yaml
+description: Create a simulated OLT Device in VOLTHA
+topology_template:
+ node_templates:
+
+ service#volt:
+ type: tosca.nodes.VOLTService
+ properties:
+ name: volt
+ must-exist: true
+
+ # OLT ------------------------------------------------
+ olt_device:
+ type: tosca.nodes.OLTDevice
+ properties:
+ name: ONF OLT
+ device_type: openolt
+ host: 10.90.0.114
+ port: 9191
+ switch_datapath_id: of:0000000000000001
+ switch_port: "1"
+ outer_tpid: "0x8100"
+ uplink: "65536"
+ nas_id: "NAS_ID"
+ requirements:
+ - volt_service:
+ node: service#volt
+ relationship: tosca.relationships.BelongsToOne
+
+ # Whitelist ------------------------------------------------
+ ALPHe3d1cfe3:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: ALPHe3d1cfe3
+ pon_port_id: 536870912
+ device_id: of:000000000a5a0097
+ requirements:
+ - owner:
+ node: service#att
+ relationship: tosca.relationships.BelongsToOne
+
+ ISKT71E80080:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: ISKT71E80080
+ pon_port_id: 536870912
+ device_id: of:000000000a5a0097
+ requirements:
+ - owner:
+ node: service#att
+ relationship: tosca.relationships.BelongsToOne
+
+ # Subscriber ------------------------------------------------
+ shad_1:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: Sub_ALPHe3d1cfe3
+ status: pre-provisioned
+ c_tag: 111
+ s_tag: 222
+ onu_device: ALPHe3d1cfe3
+ nas_port_id : "PON 1/1/03/1:1.1.1"
+ circuit_id: foo1
+ remote_id: bar1
+
+ shad_2:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: Sub_ISKT71E80080
+ status: pre-provisioned
+ c_tag: 222
+ s_tag: 222
+ onu_device: ISKT71E80080
+ nas_port_id : "PON 1/1/04/1:1.1.1"
+ circuit_id: foo2
+ remote_id: bar2
\ No newline at end of file
diff --git a/tosca-configs/att-workflow/onlab-pod1-subscriber.yaml b/tosca-configs/att-workflow/onlab-pod1-subscriber.yaml
index 68a4bb1..5ee3c0c 100755
--- a/tosca-configs/att-workflow/onlab-pod1-subscriber.yaml
+++ b/tosca-configs/att-workflow/onlab-pod1-subscriber.yaml
@@ -24,10 +24,10 @@
node_templates:
# Pre-provision the subscriber the subscriber
- my_house:
+ onf_subscriber_1:
type: tosca.nodes.RCORDSubscriber
properties:
- name: QQClient
+ name: Sub_BRCM22222222
status: pre-provisioned
c_tag: 111
s_tag: 111
@@ -36,10 +36,10 @@
circuit_id: foo1
remote_id: bar1
- ISK1:
+ onf_subscriber_2:
type: tosca.nodes.RCORDSubscriber
properties:
- name: Client3
+ name: Sub_ALPHe3d1cfde
status: pre-provisioned
c_tag: 112
s_tag: 111
@@ -48,10 +48,10 @@
circuit_id: foo2
remote_id: bar2
- ISK2:
+ onf_subscriber_3:
type: tosca.nodes.RCORDSubscriber
properties:
- name: ISKClientA0
+ name: Sub_ISKT71e801a0
status: pre-provisioned
c_tag: 113
s_tag: 111