new openonu go ATT job - flex pod

Change-Id: Iddc578df73c1b2331a5cdce5e34c4feb1cb03939
diff --git a/deployment-configs/flex-ocp-cord-openonugo.yaml b/deployment-configs/flex-ocp-cord-openonugo.yaml
new file mode 100644
index 0000000..066970d
--- /dev/null
+++ b/deployment-configs/flex-ocp-cord-openonugo.yaml
@@ -0,0 +1,121 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Automated deployment configuration for Flex POD 1 , olt/onu are connected to this
+
+---
+
+kube_config: 'flex-ocp-cord-voltha-master.conf'
+
+nodes:
+  -
+    ip: '10.192.20.45'
+    user: 'cord'
+    pass: 'cord'
+  -
+    ip: '10.192.20.46'
+    user: 'cord'
+    pass: 'cord'
+  -
+    ip: '10.192.20.47'
+    user: 'cord'
+    pass: 'cord'
+
+fabric_switches:
+  -
+    mac: 'cc:37:ab:5b:6d:a8'
+    ip: '10.192.20.217'
+    user: 'root'
+    pass: 'onl'
+    bngPort: '3'
+    device_id: 'of:0000000000000001'
+
+olts:
+  -
+    ip: '10.192.20.206'
+    sship: '10.192.20.206'
+    user: 'root'
+    pass: 'onl'
+    fortygig: 'true'
+    aggPort: '10'
+    serial: 'EC1838000853'
+    oltDebVersion: openolt_asfvolt16-3.1.0-812c1126ece038da5c40d0830a09cb67ca36ea07.deb
+    oltDebVersion23: openolt_asfvolt16-2.4.9-dev-d4aeca5a2094f7dc7c519913ab1558348c546dab.deb
+
+onus:
+  -
+    serial: 'ALPHe3d1cfa7'
+
+hosts:
+  src:
+    -
+      ip: '10.192.20.61'
+      user: 'cord'
+      pass: 'cord'
+      dp_iface_name: 'ens2f0'
+      container_type: null
+      container_name: null
+      onu: 'ALPHe3d1cea3'
+      olt: 'EC1838000853'
+      c_tag: '801'
+      s_tag: '111'
+      power_switch_port: 1
+      onu_type: 'alpha'
+    -
+      ip: '10.192.20.46'
+      user: 'cord'
+      pass: 'cord'
+      dp_iface_name: 'ens2f1'
+      container_type: null
+      container_name: null
+      onu: 'ALPHe3d1ceb7'
+      olt: 'EC1838000853'
+      c_tag: '101'
+      s_tag: '222'
+      power_switch_port: 2
+      onu_type: 'alpha'
+
+  dst:
+    -
+      ip: null
+      user: null
+      pass: null
+      noroot_ip: '10.192.20.47'
+      noroot_user: cord
+      noroot_pass: cord
+      dp_iface_name: ens3d1
+      dp_iface_ip_qinq: '10.8.8.100'
+      dp_iface_ip: null
+      dp_iface_gateway: null
+      container_type: null
+      container_name: null
+    -
+      ip: null
+      user: null
+      pass: null
+      noroot_ip: '10.192.20.47'
+      noroot_user: cord
+      noroot_pass: cord
+      dp_iface_name: ens3d1
+      dp_iface_ip_qinq: '10.8.7.100'
+      dp_iface_ip: null
+      dp_iface_gateway: null
+      container_type: null
+      container_name: null
+
+web_power_switch:
+  ip: '10.192.20.56'
+  user: 'admin'
+  password: '1234'
+  type: 'DLI'
diff --git a/kubernetes-configs/flex-ocp-cord-openonugo.conf b/kubernetes-configs/flex-ocp-cord-openonugo.conf
new file mode 100644
index 0000000..0d43443
--- /dev/null
+++ b/kubernetes-configs/flex-ocp-cord-openonugo.conf
@@ -0,0 +1,38 @@
+apiVersion: v1
+kind: Config
+clusters:
+- name: "flex-ocp-cord"
+  cluster:
+    server: "https://10.192.20.45:6443"
+    certificate-authority-data: "LS0tLS1CRUdJTiBDRVJUSUZJQ0FURS0tLS0tCk1JSUN3akNDQ\
+      WFxZ0F3SUJBZ0lCQURBTkJna3Foa2lHOXcwQkFRc0ZBREFTTVJBd0RnWURWUVFERXdkcmRXSmwKT\
+      FdOaE1CNFhEVEl3TURneU56RTNNall3TkZvWERUTXdNRGd5TlRFM01qWXdORm93RWpFUU1BNEdBM\
+      VVFQXhNSAphM1ZpWlMxallUQ0NBU0l3RFFZSktvWklodmNOQVFFQkJRQURnZ0VQQURDQ0FRb0NnZ\
+      0VCQU5BcFpLOWczYUVFCmJvbWs4TjhUV09lQXZnbVdEMHl0NFkrNjhOVnpzS010UHhEcm9najVuN\
+      2FTbGRCVDZlWUo1c255d1lOd1ZvVG4KYThPUmlrdmVNODR0OGlrWEFpcDgwdHVDc1NCK0ZVU1RQN\
+      zlXTjZsV29COThlTStlSjFqRHZaVmxCRldienpXTwo5TmVnaHZhQ3Z3QjlQcEJVZktmdGlIT1EwS\
+      TdtR2dxQVQrUTY2MXk3OFo2WmNXandCanl5eGdwMUt3U3JOaHZuCnVSK0FiWGkvWGM4SEI1OGw1d\
+      TVKN0oyV0xMa3Q2eVdLVklHcFVmZEZxSllzN3ZOaXpIZFR1VklLRGFsOXdVb0EKWmNMN1krTVplb\
+      XY0YWd1eElvZGg1b1o4V1RqcEpDNW1tSXNIZkJ5RkJaTjNwRncyU2N5bnVjVkxHL0tyN0F5TApve\
+      FUwY20vaGZEc0NBd0VBQWFNak1DRXdEZ1lEVlIwUEFRSC9CQVFEQWdLa01BOEdBMVVkRXdFQi93U\
+      UZNQU1CCkFmOHdEUVlKS29aSWh2Y05BUUVMQlFBRGdnRUJBSUZWVTZPUEpneGhacEJTNHRPTlBCT\
+      FJDVTJnZmgrMHB6YUoKU3grTUpubG1wOWMxL29qaHh5ZmtvT3BUOEhReU8wb0FlaDJaMUVZNzVMO\
+      XhxZlAydU56N2xRM0d6WCtMSHlUVwpZYW43em1obkd5cXdrMmNyRmRXSUcxZ21TSG5USzQwbmpDV\
+      FBYeFdVRTQxdXEybkt3cG5wWk85QktWZUtVVUVICm9IWndrNHZMTGo0cForRmp3Qi9XcGt2dWlFZ\
+      U5POHhYMjlOQkdEVnhubVJ3SWVxRUFTbG10TFpyNFl5ZTIvcFQKNm8yd2lwcjlDNERzd1VWWkhJZ\
+      3JBM1J3WjU0czRBSWlVc1FaZ3QrTDI3K2Y4RzhRSHdOMWtVaVNPSjFuMzVkagpscTJMMW1jMHRnN\
+      UJvU1lLcGhHZEZVdWN2c0Qxd0RqRG9jelcyOS8yNDR3eno4Zk5mcDA9Ci0tLS0tRU5EIENFUlRJR\
+      klDQVRFLS0tLS0K"
+
+users:
+- name: "flex-ocp-cord"
+  user:
+    token: "kubeconfig-user-cvpsj.c-xvwg9:xcjwk4h2l8826w9ck4h6jwxkfqfq8g6zbmmrcr27gxbjznwkcdhg42"
+
+contexts:
+- name: "flex-ocp-cord"
+  context:
+    user: "flex-ocp-cord"
+    cluster: "flex-ocp-cord"
+
+current-context: "flex-ocp-cord"
diff --git a/kubernetes-configs/voltha/flex-ocp-cord-openonugo.yml b/kubernetes-configs/voltha/flex-ocp-cord-openonugo.yml
new file mode 100644
index 0000000..95b18f3
--- /dev/null
+++ b/kubernetes-configs/voltha/flex-ocp-cord-openonugo.yml
@@ -0,0 +1,78 @@
+# Copyright 2019 Ciena Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+defaults:
+  image_tag: master
+  image_pullPolicy: Always
+
+onosSshPort: 30115
+onosApiPort: 30120
+onosOfPort: 31653
+
+individualOpenFlowNodePorts: true
+
+#images:
+#  onos:
+#    repository: voltha/voltha-onos@sha256
+#    tag: 9f781ace4c6f4bf3b2e5ff9cb9f26aa4b328284da1d6b6523636dca1375d7666
+#  adapter_open_onu:
+#     repository: gcgirish/voltha-openonu-adapter
+#     tag: ttfix
+#  adapter_open_olt:
+#    repository: gcgirish/voltha-openolt-adapter
+#    tag: fixAction
+#  rw_core:
+#    repository: gcgirish/voltha-rw-core
+#    tag: delete-device
+deployments:
+  etcdOperator: true
+  backupOperator: false
+  restoreOperator: false
+
+voltha-etcd-cluster:
+  clusterSize: 1
+onos_env:
+- name: POD_IP
+  valueFrom:
+  fieldRef:
+    fieldPath: status.podIP
+- name: NAMESPACE
+  valueFrom:
+  fieldRef:
+    fieldPath: metadata.namespace
+- name: ONOS_APPS
+  value: "drivers,openflow-base,hostprovider"
+
+apps:
+  - org.onosproject.lldpprovider
+  - org.onosproject.openflow-base
+  - org.onosproject.gui2
+  - org.onosproject.drivers
+  - org.onosproject.mcast
+  - org.opencord.kafka
+  - org.opencord.sadis
+  - org.opencord.dhcpl2relay
+  - org.opencord.igmpproxy
+  - org.opencord.mcast
+  - org.opencord.olt
+  - org.opencord.aaa
+
+atomix:
+  persistence:
+    enabled: false
+
+# Customization for BBSIM
+kafka_broker: 'voltha-kafka.voltha.svc.cluster.local:9092'
+pon_ports: 1
+onus_per_pon_port: 1
diff --git a/tosca-configs/voltha/flex-ocp-cord-openonugo-onos-netcfg-switch.json b/tosca-configs/voltha/flex-ocp-cord-openonugo-onos-netcfg-switch.json
new file mode 100644
index 0000000..42a4c20
--- /dev/null
+++ b/tosca-configs/voltha/flex-ocp-cord-openonugo-onos-netcfg-switch.json
@@ -0,0 +1,24 @@
+{
+  "devices": {
+    "of:0000000000000001" : {
+      "segmentrouting" : {
+        "name" : "Leaf-R1",
+        "ipv4NodeSid" : 101,
+        "ipv4Loopback" : "10.6.1.254",
+        "routerMac" : "00:00:00:00:01:80",
+        "isEdgeRouter" : true,
+        "adjacencySids" : []
+      },
+      "basic" : {
+        "driver" : "ofdpa3"
+      }
+    }
+  },
+  "apps": {
+    "org.opencord.dhcpl2relay" : {
+      "dhcpl2relay" : {
+        "useOltUplinkForServerPktInOut" : true
+      }
+    }
+  }
+}