Adding separated TOSCA for each OLT
Change-Id: Idae21d4b87121f4740906a7556e0eb52b3e314b1
diff --git a/tosca-configs/att-workflow/bbwf-adtran-olt.yaml b/tosca-configs/att-workflow/bbwf-adtran-olt.yaml
new file mode 100755
index 0000000..5e6efca
--- /dev/null
+++ b/tosca-configs/att-workflow/bbwf-adtran-olt.yaml
@@ -0,0 +1,48 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @bbwf-adtran-olt.yaml http://192.168.100.1:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/oltdevice.yaml
+ - custom_types/onudevice.yaml
+ - custom_types/voltservice.yaml
+description: Creates OLT devices
+topology_template:
+ node_templates:
+
+ service#volt:
+ type: tosca.nodes.VOLTService
+ properties:
+ name: volt
+ must-exist: true
+
+ adtran:
+ type: tosca.nodes.OLTDevice
+ properties:
+ name: Adtran OLT
+ device_type: adtran_olt
+ host: 192.168.100.112
+ port: 830
+ switch_datapath_id: of:0000000000000001
+ switch_port: "50"
+ outer_tpid: "0x8100"
+ uplink: "1"
+ nas_id: "NAS_ID"
+ requirements:
+ - volt_service:
+ node: service#volt
+ relationship: tosca.relationships.BelongsToOne
+
diff --git a/tosca-configs/att-workflow/bbwf-cig-olt.yaml b/tosca-configs/att-workflow/bbwf-cig-olt.yaml
new file mode 100755
index 0000000..fadcb71
--- /dev/null
+++ b/tosca-configs/att-workflow/bbwf-cig-olt.yaml
@@ -0,0 +1,48 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @bbwf-cig-olt.yaml http://192.168.100.1:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/oltdevice.yaml
+ - custom_types/onudevice.yaml
+ - custom_types/voltservice.yaml
+description: Creates OLT devices
+topology_template:
+ node_templates:
+
+ service#volt:
+ type: tosca.nodes.VOLTService
+ properties:
+ name: volt
+ must-exist: true
+
+ cig:
+ type: tosca.nodes.OLTDevice
+ properties:
+ name: CIG OLT
+ device_type: openolt
+ host: 192.168.100.113
+ port: 10400
+ switch_datapath_id: of:0000000000000001
+ switch_port: "51"
+ outer_tpid: "0x8100"
+ uplink: "65536"
+ nas_id: "NAS_ID"
+ requirements:
+ - volt_service:
+ node: service#volt
+ relationship: tosca.relationships.BelongsToOne
+
diff --git a/tosca-configs/att-workflow/bbwf-edgecore-olt.yaml b/tosca-configs/att-workflow/bbwf-edgecore-olt.yaml
new file mode 100755
index 0000000..678832a
--- /dev/null
+++ b/tosca-configs/att-workflow/bbwf-edgecore-olt.yaml
@@ -0,0 +1,48 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @bbwf-edgecore-olt.yaml http://192.168.100.1:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/oltdevice.yaml
+ - custom_types/onudevice.yaml
+ - custom_types/voltservice.yaml
+description: Creates OLT devices
+topology_template:
+ node_templates:
+
+ service#volt:
+ type: tosca.nodes.VOLTService
+ properties:
+ name: volt
+ must-exist: true
+
+ edgecore:
+ type: tosca.nodes.OLTDevice
+ properties:
+ name: EdgeCore OLT
+ device_type: openolt
+ host: 192.168.100.111
+ port: 9191
+ switch_datapath_id: of:0000000000000001
+ switch_port: "49"
+ outer_tpid: "0x8100"
+ uplink: "65536"
+ nas_id: "NAS_ID"
+ requirements:
+ - volt_service:
+ node: service#volt
+ relationship: tosca.relationships.BelongsToOne
+
diff --git a/tosca-configs/att-workflow/bbwf-fabric.yaml b/tosca-configs/att-workflow/bbwf-fabric.yaml
index 565ccd7..1d0de5b 100755
--- a/tosca-configs/att-workflow/bbwf-fabric.yaml
+++ b/tosca-configs/att-workflow/bbwf-fabric.yaml
@@ -12,7 +12,7 @@
# See the License for the specific language governing permissions and
# limitations under the License.
-# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @onlab-pod1-fabric.yaml http://10.90.0.101:30007/run
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @bbwf-fabric.yaml http://192.168.100.1:30007/run
tosca_definitions_version: tosca_simple_yaml_1_0
imports:
diff --git a/tosca-configs/att-workflow/bbwf-iskt-gpon-olt.yaml b/tosca-configs/att-workflow/bbwf-iskt-gpon-olt.yaml
new file mode 100755
index 0000000..b21fc2f
--- /dev/null
+++ b/tosca-configs/att-workflow/bbwf-iskt-gpon-olt.yaml
@@ -0,0 +1,48 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @bbwf-iskt-gpon-olt.yaml http://192.168.100.1:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/oltdevice.yaml
+ - custom_types/onudevice.yaml
+ - custom_types/voltservice.yaml
+description: Creates OLT devices
+topology_template:
+ node_templates:
+
+ service#volt:
+ type: tosca.nodes.VOLTService
+ properties:
+ name: volt
+ must-exist: true
+
+ iskratel-gpon:
+ type: tosca.nodes.OLTDevice
+ properties:
+ name: Iskratel GPON OLT
+ device_type: openolt
+ host: 192.168.100.115
+ port: 9191
+ switch_datapath_id: of:0000000000000001
+ switch_port: "47"
+ outer_tpid: "0x8100"
+ uplink: "65536"
+ nas_id: "NAS_ID"
+ requirements:
+ - volt_service:
+ node: service#volt
+ relationship: tosca.relationships.BelongsToOne
+
diff --git a/tosca-configs/att-workflow/bbwf-iskt-gxpon-olt.yaml b/tosca-configs/att-workflow/bbwf-iskt-gxpon-olt.yaml
new file mode 100755
index 0000000..392cddb
--- /dev/null
+++ b/tosca-configs/att-workflow/bbwf-iskt-gxpon-olt.yaml
@@ -0,0 +1,48 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @bbwf-iskt-gxpon-olt.yaml http://192.168.100.1:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/oltdevice.yaml
+ - custom_types/onudevice.yaml
+ - custom_types/voltservice.yaml
+description: Creates OLT devices
+topology_template:
+ node_templates:
+
+ service#volt:
+ type: tosca.nodes.VOLTService
+ properties:
+ name: volt
+ must-exist: true
+
+ iskratel-xgspon:
+ type: tosca.nodes.OLTDevice
+ properties:
+ name: Iskratel XGS-PON OLT
+ device_type: openolt
+ host: 192.168.100.114
+ port: 9191
+ switch_datapath_id: of:0000000000000001
+ switch_port: "46"
+ outer_tpid: "0x8100"
+ uplink: "65536"
+ nas_id: "NAS_ID"
+ requirements:
+ - volt_service:
+ node: service#volt
+ relationship: tosca.relationships.BelongsToOne
+
diff --git a/tosca-configs/att-workflow/bbwf-olt.yaml b/tosca-configs/att-workflow/bbwf-olt.yaml
index ccd218b..ae00a8b 100755
--- a/tosca-configs/att-workflow/bbwf-olt.yaml
+++ b/tosca-configs/att-workflow/bbwf-olt.yaml
@@ -12,7 +12,7 @@
# See the License for the specific language governing permissions and
# limitations under the License.
-# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @onlab-pod1-olt.yaml http://10.90.0.101:30007/run
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @bbwf-olt.yaml http://192.168.100.1:30007/run
tosca_definitions_version: tosca_simple_yaml_1_0
imports:
diff --git a/tosca-configs/att-workflow/bbwf-subscriber.yaml b/tosca-configs/att-workflow/bbwf-subscriber.yaml
index a0cf76e..a47e627 100755
--- a/tosca-configs/att-workflow/bbwf-subscriber.yaml
+++ b/tosca-configs/att-workflow/bbwf-subscriber.yaml
@@ -12,7 +12,7 @@
# See the License for the specific language governing permissions and
# limitations under the License.
-# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @onlab-pod1-subscriber.yaml http://10.90.0.101:30007/run
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @bbwf-subscriber.yaml http://192.168.100.1:30007/run
tosca_definitions_version: tosca_simple_yaml_1_0
imports: