adding flex-ocp-cord pod toscas
Change-Id: Ic46e90a8b4d43da088b8215048212b1e344b6d81
diff --git a/tosca-configs/att-workflow/flex-ocp-cord-fabric.yaml b/tosca-configs/att-workflow/flex-ocp-cord-fabric.yaml
new file mode 100755
index 0000000..af051bd
--- /dev/null
+++ b/tosca-configs/att-workflow/flex-ocp-cord-fabric.yaml
@@ -0,0 +1,175 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @flex-pod1-olt-fabric.yaml http://10.192.20.45:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/switch.yaml
+ - custom_types/switchport.yaml
+ - custom_types/portinterface.yaml
+ - custom_types/bngportmapping.yaml
+ - custom_types/attworkflowdriverwhitelistentry.yaml
+ - custom_types/attworkflowdriverservice.yaml
+ - custom_types/serviceinstanceattribute.yaml
+ - custom_types/onosapp.yaml
+ - custom_types/technologyprofile.yaml
+
+description: Configures the Flex POD with AT&T workflow
+
+topology_template:
+ node_templates:
+ # Fabric configuration
+ switch#leaf_1:
+ type: tosca.nodes.Switch
+ properties:
+ driver: ofdpa3
+ ipv4Loopback: 192.168.9.24
+ ipv4NodeSid: 19
+ isEdgeRouter: false
+ name: Fabric Switch - 1
+ ofId: of:0000cc37ab5b6da8
+ routerMac: 00:00:00:00:00:03
+
+ # Setup the OLT switch port
+ port#olt_port:
+ type: tosca.nodes.SwitchPort
+ properties:
+ portId: 10
+ host_learning: false
+ requirements:
+ - switch:
+ node: switch#leaf_1
+ relationship: tosca.relationships.BelongsToOne
+
+ # Port connected to the BNG
+ port#bng_port:
+ type: tosca.nodes.SwitchPort
+ properties:
+ portId: 3
+ requirements:
+ - switch:
+ node: switch#leaf_1
+ relationship: tosca.relationships.BelongsToOne
+
+ # Setup the fabric switch port where the external
+ # router is connected to
+ bngmapping:
+ type: tosca.nodes.BNGPortMapping
+ properties:
+ s_tag: any
+ switch_port: 3
+
+ # DHCP L2 Relay config
+ onos_app#dhcpl2relay:
+ type: tosca.nodes.ONOSApp
+ properties:
+ name: dhcpl2relay
+ must-exist: true
+
+ dhcpl2relay-config-attr:
+ type: tosca.nodes.ServiceInstanceAttribute
+ properties:
+ name: /onos/v1/network/configuration/apps/org.opencord.dhcpl2relay
+ value: >
+ {
+ "dhcpl2relay" : {
+ "useOltUplinkForServerPktInOut" : false,
+ "dhcpServerConnectPoints" : [ "of:0000cc37ab5b6da8/3" ]
+ }
+ }
+ requirements:
+ - service_instance:
+ node: onos_app#dhcpl2relay
+ relationship: tosca.relationships.BelongsToOne
+
+ # ONU Whitelist
+ service#att:
+ type: tosca.nodes.AttWorkflowDriverService
+ properties:
+ name: att-workflow-driver
+ must-exist: true
+
+ ALPHe3d1cfa7:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: ALPHe3d1cfa7
+ pon_port_id: 536870912
+ device_id: of:000000000ac014ce
+ requirements:
+ - owner:
+ node: service#att
+ relationship: tosca.relationships.BelongsToOne
+
+ technologyProfile:
+ type: tosca.nodes.TechnologyProfile
+ properties:
+ profile_id: 64
+ technology: xgspon
+ profile_value: >
+ {
+ "name": "4QueueHybridProfileMap1",
+ "profile_type": "XPON",
+ "version": 1.0,
+ "num_gem_ports": 1,
+ "instance_control": {
+ "onu": "multi-instance",
+ "uni": "single-instance",
+ "max_gem_payload_size": "auto"
+ },
+ "us_scheduler": {
+ "additional_bw": "auto",
+ "direction": "UPSTREAM",
+ "priority": 0,
+ "weight": 0,
+ "q_sched_policy": "hybrid"
+ },
+ "ds_scheduler": {
+ "additional_bw": "auto",
+ "direction": "DOWNSTREAM",
+ "priority": 0,
+ "weight": 0,
+ "q_sched_policy": "hybrid"
+ },
+ "upstream_gem_port_attribute_list": [{
+ "pbit_map": "0b11111111",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 1,
+ "weight": 0,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "min_threshold": 0,
+ "max_threshold": 0,
+ "max_probability": 0
+ }
+ }
+ ],
+ "downstream_gem_port_attribute_list": [{
+ "pbit_map": "0b11111111",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 1,
+ "weight": 0,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "min_threshold": 0,
+ "max_threshold": 0,
+ "max_probability": 0
+ }
+ }
+ ]
+ }
diff --git a/tosca-configs/att-workflow/flex-ocp-cord-olt.yaml b/tosca-configs/att-workflow/flex-ocp-cord-olt.yaml
new file mode 100755
index 0000000..8372eff
--- /dev/null
+++ b/tosca-configs/att-workflow/flex-ocp-cord-olt.yaml
@@ -0,0 +1,111 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @flex-pod1-olt-olt.yaml http://10.192.20.45:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/oltdevice.yaml
+ - custom_types/onudevice.yaml
+ - custom_types/voltservice.yaml
+ - custom_types/technologyprofile.yaml
+description: Create a simulated OLT Device in VOLTHA
+topology_template:
+ node_templates:
+
+ service#volt:
+ type: tosca.nodes.VOLTService
+ properties:
+ name: volt
+ must-exist: true
+
+ olt_device:
+ type: tosca.nodes.OLTDevice
+ properties:
+ name: olt-1
+ device_type: openolt
+ host: 10.192.20.206
+ port: 9191
+ switch_datapath_id: of:0000cc37ab5b6da8
+ switch_port: "10"
+ outer_tpid: "0x8100"
+ uplink: "65536"
+ nas_id: "NAS_ID"
+ serial_number: "EC1838000853"
+ requirements:
+ - volt_service:
+ node: service#volt
+ relationship: tosca.relationships.BelongsToOne
+
+ technologyProfile:
+ type: tosca.nodes.TechnologyProfile
+ properties:
+ profile_id: 64
+ technology: xgspon
+ profile_value: >
+ {
+ "name": "4QueueHybridProfileMap1",
+ "profile_type": "XPON",
+ "version": 1.0,
+ "num_gem_ports": 1,
+ "instance_control": {
+ "onu": "multi-instance",
+ "uni": "single-instance",
+ "max_gem_payload_size": "auto"
+ },
+ "us_scheduler": {
+ "additional_bw": "auto",
+ "direction": "UPSTREAM",
+ "priority": 0,
+ "weight": 0,
+ "q_sched_policy": "hybrid"
+ },
+ "ds_scheduler": {
+ "additional_bw": "auto",
+ "direction": "DOWNSTREAM",
+ "priority": 0,
+ "weight": 0,
+ "q_sched_policy": "hybrid"
+ },
+ "upstream_gem_port_attribute_list": [{
+ "pbit_map": "0b11111111",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 1,
+ "weight": 0,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "min_threshold": 0,
+ "max_threshold": 0,
+ "max_probability": 0
+ }
+ }
+ ],
+ "downstream_gem_port_attribute_list": [{
+ "pbit_map": "0b11111111",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 1,
+ "weight": 0,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "min_threshold": 0,
+ "max_threshold": 0,
+ "max_probability": 0
+ }
+ }
+ ]
+ }
diff --git a/tosca-configs/att-workflow/flex-ocp-cord-subscriber.yaml b/tosca-configs/att-workflow/flex-ocp-cord-subscriber.yaml
new file mode 100755
index 0000000..ac9eb6d
--- /dev/null
+++ b/tosca-configs/att-workflow/flex-ocp-cord-subscriber.yaml
@@ -0,0 +1,63 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @onlab-pod1-subscriber.yaml http://10.192.20.45:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/rcordsubscriber.yaml
+ - custom_types/bandwidthprofile.yaml
+
+description: Pre-provsion a subscriber
+
+topology_template:
+ node_templates:
+
+ default_bp:
+ type: tosca.nodes.BandwidthProfile
+ properties:
+ name: Default
+ must-exist: true
+
+ # bandwidth2 bandwidthprofile for subscriber
+ bandwidth2_bp:
+ type: tosca.nodes.BandwidthProfile
+ properties:
+ air: 100000
+ cbs: 10000
+ cir: 5000
+ ebs: 10000
+ eir: 5000
+ name: bandwidth2
+
+ # Pre-provision the subscriber the subscriber
+ my_house:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: My House-305
+ status: pre-provisioned
+ s_tag: 111
+ c_tag: 999
+ onu_device: ALPHe3d1cfa7
+ nas_port_id : "PON 1/1/03/1:1.1.1"
+ circuit_id: foo1
+ remote_id: bar1
+ tech_profile_id: 64
+ requirements:
+ - upstream_bps:
+ node: bandwidth2_bp
+ relationship: tosca.relationships.BelongsToOne
+ - downstream_bps:
+ node: bandwidth2_bp
+ relationship: tosca.relationships.BelongsToOne