diff --git a/tosca-configs/att-workflow/flex-ocp-cord-fabric.yaml b/tosca-configs/att-workflow/flex-ocp-cord-fabric.yaml
new file mode 100755
index 0000000..af051bd
--- /dev/null
+++ b/tosca-configs/att-workflow/flex-ocp-cord-fabric.yaml
@@ -0,0 +1,175 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @flex-pod1-olt-fabric.yaml http://10.192.20.45:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+  - custom_types/switch.yaml
+  - custom_types/switchport.yaml
+  - custom_types/portinterface.yaml
+  - custom_types/bngportmapping.yaml
+  - custom_types/attworkflowdriverwhitelistentry.yaml
+  - custom_types/attworkflowdriverservice.yaml
+  - custom_types/serviceinstanceattribute.yaml
+  - custom_types/onosapp.yaml
+  - custom_types/technologyprofile.yaml
+
+description: Configures the Flex POD with AT&T workflow
+
+topology_template:
+  node_templates:
+    # Fabric configuration
+    switch#leaf_1:
+      type: tosca.nodes.Switch
+      properties:
+        driver: ofdpa3
+        ipv4Loopback: 192.168.9.24
+        ipv4NodeSid: 19
+        isEdgeRouter: false
+        name: Fabric Switch - 1
+        ofId: of:0000cc37ab5b6da8
+        routerMac: 00:00:00:00:00:03
+
+    # Setup the OLT switch port
+    port#olt_port:
+      type: tosca.nodes.SwitchPort
+      properties:
+        portId: 10
+        host_learning: false
+      requirements:
+        - switch:
+            node: switch#leaf_1
+            relationship: tosca.relationships.BelongsToOne
+
+    # Port connected to the BNG
+    port#bng_port:
+      type: tosca.nodes.SwitchPort
+      properties:
+        portId: 3
+      requirements:
+        - switch:
+            node: switch#leaf_1
+            relationship: tosca.relationships.BelongsToOne
+
+    # Setup the fabric switch port where the external
+    # router is connected to
+    bngmapping:
+      type: tosca.nodes.BNGPortMapping
+      properties:
+        s_tag: any
+        switch_port: 3
+
+    # DHCP L2 Relay config
+    onos_app#dhcpl2relay:
+      type: tosca.nodes.ONOSApp
+      properties:
+        name: dhcpl2relay
+        must-exist: true
+
+    dhcpl2relay-config-attr:
+      type: tosca.nodes.ServiceInstanceAttribute
+      properties:
+        name: /onos/v1/network/configuration/apps/org.opencord.dhcpl2relay
+        value: >
+          {
+            "dhcpl2relay" : {
+              "useOltUplinkForServerPktInOut" : false,
+              "dhcpServerConnectPoints" : [ "of:0000cc37ab5b6da8/3" ]
+            }
+          }
+      requirements:
+        - service_instance:
+            node: onos_app#dhcpl2relay
+            relationship: tosca.relationships.BelongsToOne
+
+    # ONU Whitelist
+    service#att:
+      type: tosca.nodes.AttWorkflowDriverService
+      properties:
+        name: att-workflow-driver
+        must-exist: true
+
+    ALPHe3d1cfa7:
+      type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+      properties:
+        serial_number: ALPHe3d1cfa7
+        pon_port_id: 536870912
+        device_id: of:000000000ac014ce
+      requirements:
+        - owner:
+            node: service#att
+            relationship: tosca.relationships.BelongsToOne
+
+    technologyProfile:
+      type: tosca.nodes.TechnologyProfile
+      properties:
+        profile_id: 64
+        technology: xgspon
+        profile_value: >
+          {
+            "name": "4QueueHybridProfileMap1",
+            "profile_type": "XPON",
+            "version": 1.0,
+            "num_gem_ports": 1,
+            "instance_control": {
+              "onu": "multi-instance",
+              "uni": "single-instance",
+              "max_gem_payload_size": "auto"
+            },
+            "us_scheduler": {
+              "additional_bw": "auto",
+              "direction": "UPSTREAM",
+              "priority": 0,
+              "weight": 0,
+              "q_sched_policy": "hybrid"
+            },
+            "ds_scheduler": {
+              "additional_bw": "auto",
+              "direction": "DOWNSTREAM",
+              "priority": 0,
+              "weight": 0,
+              "q_sched_policy": "hybrid"
+            },
+            "upstream_gem_port_attribute_list": [{
+                "pbit_map": "0b11111111",
+                "aes_encryption": "True",
+                "scheduling_policy": "StrictPriority",
+                "priority_q": 1,
+                "weight": 0,
+                "discard_policy": "TailDrop",
+                "max_q_size": "auto",
+                "discard_config": {
+                  "min_threshold": 0,
+                  "max_threshold": 0,
+                  "max_probability": 0
+                }
+              }
+            ],
+            "downstream_gem_port_attribute_list": [{
+                "pbit_map": "0b11111111",
+                "aes_encryption": "True",
+                "scheduling_policy": "StrictPriority",
+                "priority_q": 1,
+                "weight": 0,
+                "discard_policy": "TailDrop",
+                "max_q_size": "auto",
+                "discard_config": {
+                  "min_threshold": 0,
+                  "max_threshold": 0,
+                  "max_probability": 0
+                }
+              }
+            ]
+          }