diff --git a/tosca-configs/att-workflow/onlab-pod1-1.0-olt.yaml b/tosca-configs/att-workflow/onlab-pod1-1.0-olt.yaml
new file mode 100755
index 0000000..c94b5e1
--- /dev/null
+++ b/tosca-configs/att-workflow/onlab-pod1-1.0-olt.yaml
@@ -0,0 +1,100 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @onlab-pod1-olt.yaml http://10.90.0.101:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+  - custom_types/oltdevice.yaml
+  - custom_types/onudevice.yaml
+  - custom_types/voltservice.yaml
+  - custom_types/attworkflowdriverwhitelistentry.yaml
+  - custom_types/attworkflowdriverservice.yaml
+  - custom_types/rcordsubscriber.yaml
+  - custom_types/switch.yaml
+  - custom_types/switchport.yaml
+description: Create a simulated OLT Device in VOLTHA
+topology_template:
+  node_templates:
+
+    service#volt:
+      type: tosca.nodes.VOLTService
+      properties:
+        name: volt
+        must-exist: true
+
+    # CIG
+    olt_device:
+      type: tosca.nodes.OLTDevice
+      properties:
+        name: CIG
+        device_type: openolt
+        host: 10.90.0.115
+        port: 10400
+        switch_datapath_id: of:0000000000000001
+        switch_port: "4"
+        outer_tpid: "0x8100"
+        uplink: "65536"
+        nas_id: "NAS_ID"
+      requirements:
+        - volt_service:
+            node: service#volt
+            relationship: tosca.relationships.BelongsToOne
+
+    # Whitelist
+    service#att:
+      type: tosca.nodes.AttWorkflowDriverService
+      properties:
+        name: att-workflow-driver
+        must-exist: true
+
+    CIG:
+      type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+      properties:
+        serial_number: CIGG70606829
+        pon_port_id: 536870913
+        device_id: of:000000000a5a0073
+      requirements:
+        - owner:
+            node: service#att
+            relationship: tosca.relationships.BelongsToOne
+
+    # Pre-provision the subscriber
+    cig_subscriber_1:
+      type: tosca.nodes.RCORDSubscriber
+      properties:
+        name: Sub_CIGG70606829
+        status: pre-provisioned
+        c_tag: 444
+        s_tag: 444
+        onu_device: CIGG70606829
+        nas_port_id : "PON 1/1/03/1:1.1.1"
+        circuit_id: foo1
+        remote_id: bar1
+
+    switch#leaf_1:
+      type: tosca.nodes.Switch
+      properties:
+        name: AGG_SWITCH
+        must-exist: true
+
+    port#cig_olt_port:
+      type: tosca.nodes.SwitchPort
+      properties:
+        portId: 4
+        host_learning: false
+      requirements:
+        - switch:
+            node: switch#leaf_1
+            relationship: tosca.relationships.BelongsToOne
\ No newline at end of file