Adding new Tosca and deployment config files
Change-Id: I77b8a78a7bdf0dffb301d805a04f35e5d684231a
diff --git a/deployment-configs/flex-pod1-olt.yml b/deployment-configs/flex-pod1-olt.yml
index d3f4670..1c89c55 100644
--- a/deployment-configs/flex-pod1-olt.yml
+++ b/deployment-configs/flex-pod1-olt.yml
@@ -43,16 +43,19 @@
pass: 'onl'
fortygig: 'true'
-srcHost:
- ip: '10.192.4.61'
- user: 'cluser'
- pass: 'cloudlabs'
- gateway: '10.8.2.254'
- public_iface: 'enp4s0f1'
-
-dstHost:
- ip: '10.192.4.62'
- hostIp: '10.8.3.100'
- user: 'cord'
- pass: 'cord'
- gateway: '10.8.3.254'
+hosts:
+ src:
+ ip: '10.192.4.61'
+ user: 'cluser'
+ pass: 'cloudlabs'
+ dp_iface_name: 'enp4s0f1'
+ dp_iface_ip: '10.8.2.1'
+ dp_iface_gateway: '10.8.2.254'
+ dst:
+ ip: '10.192.4.62'
+ user: 'cord'
+ pass: 'cord'
+ dp_iface_name: 'ens3'
+ dp_iface_ip_qinq: '10.8.2.254'
+ dp_iface_ip: '10.8.3.1'
+ dp_iface_gateway: '10.8.3.254'
diff --git a/tosca-configs/att-workflow/edgecore-pod1-fabric.yaml b/tosca-configs/att-workflow/edgecore-pod1-fabric.yaml
new file mode 100755
index 0000000..c437171
--- /dev/null
+++ b/tosca-configs/att-workflow/edgecore-pod1-fabric.yaml
@@ -0,0 +1,88 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @onlab-pod1-fabric.yaml http://10.90.0.101:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/switch.yaml
+ - custom_types/switchport.yaml
+ - custom_types/portinterface.yaml
+ - custom_types/bngportmapping.yaml
+ - custom_types/attworkflowdriverwhitelistentry.yaml
+ - custom_types/attworkflowdriverservice.yaml
+
+description: Configures the ONF SEBA POD with AT&T workflow
+
+topology_template:
+ node_templates:
+ # Fabric configuration
+ switch#leaf_1:
+ type: tosca.nodes.Switch
+ properties:
+ driver: ofdpa3
+ ipv4Loopback: 192.168.0.201
+ ipv4NodeSid: 17
+ isEdgeRouter: True
+ name: leaf_1
+ ofId: of:0000000000000001
+ routerMac: 00:00:02:01:06:01
+
+ # Setup the OLT switch port
+ port#olt_port:
+ type: tosca.nodes.SwitchPort
+ properties:
+ portId: 1
+ host_learning: false
+ requirements:
+ - switch:
+ node: switch#leaf_1
+ relationship: tosca.relationships.BelongsToOne
+
+ # Port connected to the BNG
+ port#bng_port:
+ type: tosca.nodes.SwitchPort
+ properties:
+ portId: 1
+ host_learning: false
+ requirements:
+ - switch:
+ node: switch#leaf_1
+ relationship: tosca.relationships.BelongsToOne
+
+ # Setup the fabric switch port where the external
+ # router is connected to
+ bngmapping:
+ type: tosca.nodes.BNGPortMapping
+ properties:
+ s_tag: any
+ switch_port: 1
+
+ # ONU Whitelist
+ service#att:
+ type: tosca.nodes.AttWorkflowDriverService
+ properties:
+ name: att-workflow-driver
+ must-exist: true
+
+ ISKT71E810C0:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: ISKT71E810C0
+ pon_port_id: 536870912
+ device_id: of:000000000a5a0072
+ requirements:
+ - owner:
+ node: service#att
+ relationship: tosca.relationships.BelongsToOne
diff --git a/tosca-configs/att-workflow/edgecore-pod1-olt.yaml b/tosca-configs/att-workflow/edgecore-pod1-olt.yaml
new file mode 100755
index 0000000..4f1680b
--- /dev/null
+++ b/tosca-configs/att-workflow/edgecore-pod1-olt.yaml
@@ -0,0 +1,47 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @onlab-pod1-olt.yaml http://10.90.0.101:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/oltdevice.yaml
+ - custom_types/onudevice.yaml
+ - custom_types/voltservice.yaml
+description: Create a simulated OLT Device in VOLTHA
+topology_template:
+ node_templates:
+
+ service#volt:
+ type: tosca.nodes.VOLTService
+ properties:
+ name: volt
+ must-exist: true
+
+ olt_device:
+ type: tosca.nodes.OLTDevice
+ properties:
+ name: ONF OLT
+ device_type: openolt
+ host: 192.168.99.182
+ port: 9191
+ switch_datapath_id: of:0000000000000001
+ switch_port: "1"
+ outer_tpid: "0x8100"
+ uplink: "65536"
+ nas_id: "NAS_ID"
+ requirements:
+ - volt_service:
+ node: service#volt
+ relationship: tosca.relationships.BelongsToOne
diff --git a/tosca-configs/att-workflow/edgecore-pod1-subscriber.yaml b/tosca-configs/att-workflow/edgecore-pod1-subscriber.yaml
new file mode 100755
index 0000000..8e6d73b
--- /dev/null
+++ b/tosca-configs/att-workflow/edgecore-pod1-subscriber.yaml
@@ -0,0 +1,36 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @onlab-pod1-subscriber.yaml http://10.90.0.101:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/rcordsubscriber.yaml
+
+description: Pre-provsion a subscriber
+
+topology_template:
+ node_templates:
+
+ ISK1:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: Client1
+ status: pre-provisioned
+ c_tag: 112
+ s_tag: 111
+ onu_device: ISKT71E810C0
+ nas_port_id : "PON 1/1/04/1:1.1.1"
+ circuit_id: foo1
+ remote_id: bar1
diff --git a/tosca-configs/att-workflow/flex-pod1-olt-fabric.yaml b/tosca-configs/att-workflow/flex-pod1-olt-fabric.yaml
index 10c339f..5aeb5c1 100755
--- a/tosca-configs/att-workflow/flex-pod1-olt-fabric.yaml
+++ b/tosca-configs/att-workflow/flex-pod1-olt-fabric.yaml
@@ -23,7 +23,7 @@
- custom_types/attworkflowdriverwhitelistentry.yaml
- custom_types/attworkflowdriverservice.yaml
-description: Configures the ONF SEBA POD with AT&T workflow
+description: Configures the Flex POD with AT&T workflow
topology_template:
node_templates:
diff --git a/tosca-configs/att-workflow/flex-pod1-olt-olt.yaml b/tosca-configs/att-workflow/flex-pod1-olt-olt.yaml
index 79afe17..0a27c2b 100755
--- a/tosca-configs/att-workflow/flex-pod1-olt-olt.yaml
+++ b/tosca-configs/att-workflow/flex-pod1-olt-olt.yaml
@@ -39,7 +39,7 @@
switch_datapath_id: of:0000cc37ab5b6da8
switch_port: "7"
outer_tpid: "0x8100"
- uplink: "128"
+ uplink: "65536"
nas_id: "NAS_ID"
requirements:
- volt_service:
diff --git a/tosca-configs/rcord-topdown/flex-pod1-olt-fabric.yaml b/tosca-configs/rcord-topdown/flex-pod1-olt-fabric.yaml
new file mode 100755
index 0000000..7fa0838
--- /dev/null
+++ b/tosca-configs/rcord-topdown/flex-pod1-olt-fabric.yaml
@@ -0,0 +1,102 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @flex-pod1-olt-fabric.yaml http://10.192.4.241:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/switch.yaml
+ - custom_types/switchport.yaml
+ - custom_types/portinterface.yaml
+ - custom_types/vrouterserviceinstance.yaml
+ - custom_types/vrouterstaticroute.yaml
+
+description: Configures the ONF SEBA POD with AT&T workflow
+
+topology_template:
+ node_templates:
+ # Fabric configuration
+ switch#leaf_1:
+ type: tosca.nodes.Switch
+ properties:
+ driver: ofdpa3
+ ipv4Loopback: 192.168.9.24
+ ipv4NodeSid: 17
+ isEdgeRouter: false
+ name: Fabric Switch - 1
+ ofId: of:0000cc37ab5b6da8
+ routerMac: 00:00:00:00:00:03
+
+ # Setup the OLT switch port
+ port#olt_port:
+ type: tosca.nodes.SwitchPort
+ properties:
+ portId: 7
+ host_learning: false
+ requirements:
+ - switch:
+ node: switch#leaf_1
+ relationship: tosca.relationships.BelongsToOne
+
+ # Setup the OLT switch port interface
+ interface#olt_interface:
+ type: tosca.nodes.PortInterface
+ properties:
+ ips: 10.8.2.254/24
+ name: olt_interface
+ requirements:
+ - port:
+ node: port#olt_port
+ relationship: tosca.relationships.BelongsToOne
+
+ # Setup the fabric switch port where the external
+ # router is connected to
+ port#upstream_port:
+ type: tosca.nodes.SwitchPort
+ properties:
+ portId: 8
+ requirements:
+ - switch:
+ node: switch#leaf_1
+ relationship: tosca.relationships.BelongsToOne
+
+ # Setup the fabric switch port interface where the
+ # external router is connected to
+ interface#upstream_interface:
+ type: tosca.nodes.PortInterface
+ properties:
+ name: upstream_interface
+ vlanUntagged: 40
+ ips: 10.8.3.254/24
+ requirements:
+ - port:
+ node: port#upstream_port
+ relationship: tosca.relationships.BelongsToOne
+
+ # Add a vRouter (ONOS)
+ vrouter#my_vrouter:
+ type: tosca.nodes.VRouterServiceInstance
+ properties:
+ name: my_vrouter
+
+ # Add a static route to the vRouter (ONOS)
+ route#my_route:
+ type: tosca.nodes.VRouterStaticRoute
+ properties:
+ prefix: "0.0.0.0/0"
+ next_hop: "10.8.3.1"
+ requirements:
+ - vrouter:
+ node: vrouter#my_vrouter
+ relationship: tosca.relationships.BelongsToOne
diff --git a/tosca-configs/rcord-topdown/flex-pod1-olt-olt.yaml b/tosca-configs/rcord-topdown/flex-pod1-olt-olt.yaml
new file mode 100755
index 0000000..0a3057e
--- /dev/null
+++ b/tosca-configs/rcord-topdown/flex-pod1-olt-olt.yaml
@@ -0,0 +1,47 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @flex-pod1-olt-olt.yaml http://10.192.4.241:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/oltdevice.yaml
+ - custom_types/onudevice.yaml
+ - custom_types/voltservice.yaml
+
+description: Create a simulated OLT Device in VOLTHA
+topology_template:
+ node_templates:
+
+ service#volt:
+ type: tosca.nodes.VOLTService
+ properties:
+ name: volt
+ must-exist: true
+
+ olt_device:
+ type: tosca.nodes.OLTDevice
+ properties:
+ name: olt-1
+ device_type: openolt
+ host: 10.192.4.218
+ port: 9191
+ switch_datapath_id: of:0000cc37ab5b6da8
+ switch_port: "7"
+ outer_tpid: "0x8100"
+ uplink: "65536"
+ requirements:
+ - volt_service:
+ node: service#volt
+ relationship: tosca.relationships.BelongsToOne
diff --git a/tosca-configs/rcord-topdown/flex-pod1-olt-subscriber.yaml b/tosca-configs/rcord-topdown/flex-pod1-olt-subscriber.yaml
new file mode 100755
index 0000000..3d4b64e
--- /dev/null
+++ b/tosca-configs/rcord-topdown/flex-pod1-olt-subscriber.yaml
@@ -0,0 +1,34 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @flex-pod1-olt-subscriber.yaml http://10.90.0.101:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/rcordsubscriber.yaml
+
+description: Pre-provsion a subscriber
+
+topology_template:
+ node_templates:
+
+ # Pre-provision the subscriber the subscriber
+ my_house:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: My House-305
+ status: pre-provisioned
+ s_tag: 111
+ c_tag: 999
+ onu_device: ALPHe3d1cfa7
diff --git a/tosca-configs/rcord-zerotouch/flex-pod1-olt-fabric.yaml b/tosca-configs/rcord-zerotouch/flex-pod1-olt-fabric.yaml
new file mode 100755
index 0000000..bffd43e
--- /dev/null
+++ b/tosca-configs/rcord-zerotouch/flex-pod1-olt-fabric.yaml
@@ -0,0 +1,138 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @flex-pod1-olt-fabric.yaml http://10.192.4.241:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/switch.yaml
+ - custom_types/switchport.yaml
+ - custom_types/portinterface.yaml
+ - custom_types/vrouterserviceinstance.yaml
+ - custom_types/vrouterstaticroute.yaml
+ - custom_types/hippieossservice.yaml
+ - custom_types/servicedependency.yaml
+ - custom_types/voltservice.yaml
+
+description: Configures the ONF SEBA POD with AT&T workflow
+
+topology_template:
+ node_templates:
+ # Fabric configuration
+ switch#leaf_1:
+ type: tosca.nodes.Switch
+ properties:
+ driver: ofdpa3
+ ipv4Loopback: 192.168.9.24
+ ipv4NodeSid: 17
+ isEdgeRouter: false
+ name: Fabric Switch - 1
+ ofId: of:0000cc37ab5b6da8
+ routerMac: 00:00:00:00:00:03
+
+ # Setup the OLT switch port
+ port#olt_port:
+ type: tosca.nodes.SwitchPort
+ properties:
+ portId: 7
+ host_learning: false
+ requirements:
+ - switch:
+ node: switch#leaf_1
+ relationship: tosca.relationships.BelongsToOne
+
+ # Setup the OLT switch port interface
+ interface#olt_interface:
+ type: tosca.nodes.PortInterface
+ properties:
+ ips: 10.8.2.254/24
+ name: olt_interface
+ requirements:
+ - port:
+ node: port#olt_port
+ relationship: tosca.relationships.BelongsToOne
+
+ # Setup the fabric switch port where the external
+ # router is connected to
+ port#upstream_port:
+ type: tosca.nodes.SwitchPort
+ properties:
+ portId: 8
+ requirements:
+ - switch:
+ node: switch#leaf_1
+ relationship: tosca.relationships.BelongsToOne
+
+ # Setup the fabric switch port interface where the
+ # external router is connected to
+ interface#upstream_interface:
+ type: tosca.nodes.PortInterface
+ properties:
+ name: upstream_interface
+ vlanUntagged: 40
+ ips: 10.8.3.254/24
+ requirements:
+ - port:
+ node: port#upstream_port
+ relationship: tosca.relationships.BelongsToOne
+
+ # Add a vRouter (ONOS)
+ vrouter#my_vrouter:
+ type: tosca.nodes.VRouterServiceInstance
+ properties:
+ name: my_vrouter
+
+ # Add a static route to the vRouter (ONOS)
+ route#my_route:
+ type: tosca.nodes.VRouterStaticRoute
+ properties:
+ prefix: "0.0.0.0/0"
+ next_hop: "10.8.3.1"
+ requirements:
+ - vrouter:
+ node: vrouter#my_vrouter
+ relationship: tosca.relationships.BelongsToOne
+
+ service#volt:
+ type: tosca.nodes.VOLTService
+ properties:
+ name: volt
+ must-exist: true
+
+ service#oss:
+ type: tosca.nodes.HippieOSSService
+ properties:
+ name: hippie-oss
+ kind: oss
+
+ ALPHe3d1cfa7:
+ type: tosca.nodes.HippieOSSWhiteListEntry
+ properties:
+ serial_number: ALPHe3d1cfa7
+ requirements:
+ - owner:
+ node: service#oss
+ relationship: tosca.relationships.BelongsToOne
+
+ service_dependency#oss_volt:
+ type: tosca.nodes.ServiceDependency
+ properties:
+ connect_method: None
+ requirements:
+ - subscriber_service:
+ node: service#oss
+ relationship: tosca.relationships.BelongsToOne
+ - provider_service:
+ node: service#volt
+ relationship: tosca.relationships.BelongsToOne
diff --git a/tosca-configs/rcord-zerotouch/flex-pod1-olt-olt.yaml b/tosca-configs/rcord-zerotouch/flex-pod1-olt-olt.yaml
new file mode 100755
index 0000000..0a3057e
--- /dev/null
+++ b/tosca-configs/rcord-zerotouch/flex-pod1-olt-olt.yaml
@@ -0,0 +1,47 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @flex-pod1-olt-olt.yaml http://10.192.4.241:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/oltdevice.yaml
+ - custom_types/onudevice.yaml
+ - custom_types/voltservice.yaml
+
+description: Create a simulated OLT Device in VOLTHA
+topology_template:
+ node_templates:
+
+ service#volt:
+ type: tosca.nodes.VOLTService
+ properties:
+ name: volt
+ must-exist: true
+
+ olt_device:
+ type: tosca.nodes.OLTDevice
+ properties:
+ name: olt-1
+ device_type: openolt
+ host: 10.192.4.218
+ port: 9191
+ switch_datapath_id: of:0000cc37ab5b6da8
+ switch_port: "7"
+ outer_tpid: "0x8100"
+ uplink: "65536"
+ requirements:
+ - volt_service:
+ node: service#volt
+ relationship: tosca.relationships.BelongsToOne
diff --git a/tosca-configs/rcord-zerotouch/flex-pod1-olt-subscriber.yaml b/tosca-configs/rcord-zerotouch/flex-pod1-olt-subscriber.yaml
new file mode 100755
index 0000000..3d4b64e
--- /dev/null
+++ b/tosca-configs/rcord-zerotouch/flex-pod1-olt-subscriber.yaml
@@ -0,0 +1,34 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @flex-pod1-olt-subscriber.yaml http://10.90.0.101:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/rcordsubscriber.yaml
+
+description: Pre-provsion a subscriber
+
+topology_template:
+ node_templates:
+
+ # Pre-provision the subscriber the subscriber
+ my_house:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: My House-305
+ status: pre-provisioned
+ s_tag: 111
+ c_tag: 999
+ onu_device: ALPHe3d1cfa7