Adding new Tosca and deployment config files
Change-Id: I77b8a78a7bdf0dffb301d805a04f35e5d684231a
diff --git a/tosca-configs/rcord-zerotouch/flex-pod1-olt-fabric.yaml b/tosca-configs/rcord-zerotouch/flex-pod1-olt-fabric.yaml
new file mode 100755
index 0000000..bffd43e
--- /dev/null
+++ b/tosca-configs/rcord-zerotouch/flex-pod1-olt-fabric.yaml
@@ -0,0 +1,138 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @flex-pod1-olt-fabric.yaml http://10.192.4.241:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/switch.yaml
+ - custom_types/switchport.yaml
+ - custom_types/portinterface.yaml
+ - custom_types/vrouterserviceinstance.yaml
+ - custom_types/vrouterstaticroute.yaml
+ - custom_types/hippieossservice.yaml
+ - custom_types/servicedependency.yaml
+ - custom_types/voltservice.yaml
+
+description: Configures the ONF SEBA POD with AT&T workflow
+
+topology_template:
+ node_templates:
+ # Fabric configuration
+ switch#leaf_1:
+ type: tosca.nodes.Switch
+ properties:
+ driver: ofdpa3
+ ipv4Loopback: 192.168.9.24
+ ipv4NodeSid: 17
+ isEdgeRouter: false
+ name: Fabric Switch - 1
+ ofId: of:0000cc37ab5b6da8
+ routerMac: 00:00:00:00:00:03
+
+ # Setup the OLT switch port
+ port#olt_port:
+ type: tosca.nodes.SwitchPort
+ properties:
+ portId: 7
+ host_learning: false
+ requirements:
+ - switch:
+ node: switch#leaf_1
+ relationship: tosca.relationships.BelongsToOne
+
+ # Setup the OLT switch port interface
+ interface#olt_interface:
+ type: tosca.nodes.PortInterface
+ properties:
+ ips: 10.8.2.254/24
+ name: olt_interface
+ requirements:
+ - port:
+ node: port#olt_port
+ relationship: tosca.relationships.BelongsToOne
+
+ # Setup the fabric switch port where the external
+ # router is connected to
+ port#upstream_port:
+ type: tosca.nodes.SwitchPort
+ properties:
+ portId: 8
+ requirements:
+ - switch:
+ node: switch#leaf_1
+ relationship: tosca.relationships.BelongsToOne
+
+ # Setup the fabric switch port interface where the
+ # external router is connected to
+ interface#upstream_interface:
+ type: tosca.nodes.PortInterface
+ properties:
+ name: upstream_interface
+ vlanUntagged: 40
+ ips: 10.8.3.254/24
+ requirements:
+ - port:
+ node: port#upstream_port
+ relationship: tosca.relationships.BelongsToOne
+
+ # Add a vRouter (ONOS)
+ vrouter#my_vrouter:
+ type: tosca.nodes.VRouterServiceInstance
+ properties:
+ name: my_vrouter
+
+ # Add a static route to the vRouter (ONOS)
+ route#my_route:
+ type: tosca.nodes.VRouterStaticRoute
+ properties:
+ prefix: "0.0.0.0/0"
+ next_hop: "10.8.3.1"
+ requirements:
+ - vrouter:
+ node: vrouter#my_vrouter
+ relationship: tosca.relationships.BelongsToOne
+
+ service#volt:
+ type: tosca.nodes.VOLTService
+ properties:
+ name: volt
+ must-exist: true
+
+ service#oss:
+ type: tosca.nodes.HippieOSSService
+ properties:
+ name: hippie-oss
+ kind: oss
+
+ ALPHe3d1cfa7:
+ type: tosca.nodes.HippieOSSWhiteListEntry
+ properties:
+ serial_number: ALPHe3d1cfa7
+ requirements:
+ - owner:
+ node: service#oss
+ relationship: tosca.relationships.BelongsToOne
+
+ service_dependency#oss_volt:
+ type: tosca.nodes.ServiceDependency
+ properties:
+ connect_method: None
+ requirements:
+ - subscriber_service:
+ node: service#oss
+ relationship: tosca.relationships.BelongsToOne
+ - provider_service:
+ node: service#volt
+ relationship: tosca.relationships.BelongsToOne