Merge "adding "1.0" deployment/tosca configs"
diff --git a/deployment-configs/flex-pod1-olt-1.0.yaml b/deployment-configs/flex-pod1-olt-1.0.yaml
new file mode 100644
index 0000000..f8d0d23
--- /dev/null
+++ b/deployment-configs/flex-pod1-olt-1.0.yaml
@@ -0,0 +1,68 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Automated deployment configuration for Flex POD 1 , olt/onu are connected to this
+
+---
+
+kube_config: 'flex-pod1-olt-voltha16.conf'
+
+nodes:
+ -
+ ip: '10.192.4.241'
+ user: 'cord'
+ pass: 'cord'
+ -
+ ip: '10.192.4.242'
+ user: 'cord'
+ pass: 'cord'
+ -
+ ip: '10.192.4.243'
+ user: 'cord'
+ pass: 'cord'
+ -
+ ip: '10.192.4.244'
+ user: 'cord'
+ pass: 'cord'
+
+fabric_switches:
+ -
+ mac: 'cc:37:ab:5b:6d:a8'
+ ip: '10.192.4.217'
+ user: 'root'
+ pass: 'onl'
+
+olts:
+ -
+ ip: '10.192.4.206'
+ user: 'root'
+ pass: 'onl'
+ fortygig: 'true'
+
+hosts:
+ src:
+ ip: '10.192.4.61'
+ user: 'cluser'
+ pass: 'cloudlabs'
+ dp_iface_name: 'enp4s0f1'
+ dp_iface_ip: '10.8.2.1'
+ dp_iface_gateway: '10.8.2.254'
+ dst:
+ ip: '10.192.4.62'
+ user: 'cord'
+ pass: 'cord'
+ dp_iface_name: 'ens3'
+ dp_iface_ip_qinq: '10.8.2.100'
+ dp_iface_ip: '10.8.3.1'
+ dp_iface_gateway: '10.8.3.254'
diff --git a/deployment-configs/onlab-pod1-1.0.yaml b/deployment-configs/onlab-pod1-1.0.yaml
new file mode 100644
index 0000000..4eece97
--- /dev/null
+++ b/deployment-configs/onlab-pod1-1.0.yaml
@@ -0,0 +1,70 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Automated deployment configuration for ONF/ON.Lab physical POD 1
+
+---
+
+kube_config: '/var/new_jenkins_home/workspace/admin.conf'
+
+nodes:
+ -
+ ip: '10.90.0.101'
+ user: 'cord'
+ pass: 'cord'
+ -
+ ip: '10.90.0.102'
+ user: 'cord'
+ pass: 'cord'
+ -
+ ip: '10.90.0.103'
+ user: 'cord'
+ pass: 'cord'
+
+fabric_switches:
+ -
+ mac: 'cc:37:ab:61:80:ca'
+ ip: '10.90.0.111'
+ user: 'root'
+ pass: 'onl'
+
+olts:
+ -
+ ip: '10.90.0.114'
+ user: 'root'
+ pass: 'onl'
+ fortygig: 'true'
+
+onus:
+ -
+ serial: 'BRCM22222222'
+ -
+ serial: 'ISKT71e801a0'
+ -
+ serial: 'ALPHe3d1cfde'
+
+srcHost:
+ ip: '10.0.3.56'
+ user: 'root'
+ pass: 'root'
+
+hosts:
+ src:
+ ip: '10.90.0.51'
+ user: 'ubuntu'
+ dp_iface_name: 'eth1'
+ container_type: 'LXC'
+ container_name: 'ALPHe3d1cfde'
+ dst:
+ dp_iface_ip_qinq: '8.8.8.8'
diff --git a/kubernetes-configs/flex-pod1-olt-1.0.yml b/kubernetes-configs/flex-pod1-olt-1.0.yml
new file mode 100644
index 0000000..84e0687
--- /dev/null
+++ b/kubernetes-configs/flex-pod1-olt-1.0.yml
@@ -0,0 +1,19 @@
+---
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Automated deployment configuration for Flex POD 1 , olt/onu are connected to this
+
+# This file is used to optionally customize helm charts installations
+
diff --git a/kubernetes-configs/onlab-pod1-1.0.yml b/kubernetes-configs/onlab-pod1-1.0.yml
new file mode 100644
index 0000000..442c036
--- /dev/null
+++ b/kubernetes-configs/onlab-pod1-1.0.yml
@@ -0,0 +1,18 @@
+---
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Automated deployment configuration for onlab-pod1, olt/onu are connected to this
+
+# This file is used to optionally customize helm charts installations
diff --git a/tosca-configs/att-workflow/flex-pod1-olt-1.0-fabric.yaml b/tosca-configs/att-workflow/flex-pod1-olt-1.0-fabric.yaml
new file mode 100755
index 0000000..3064223
--- /dev/null
+++ b/tosca-configs/att-workflow/flex-pod1-olt-1.0-fabric.yaml
@@ -0,0 +1,112 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @flex-pod1-olt-fabric.yaml http://10.192.4.241:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/switch.yaml
+ - custom_types/switchport.yaml
+ - custom_types/portinterface.yaml
+ - custom_types/bngportmapping.yaml
+ - custom_types/attworkflowdriverwhitelistentry.yaml
+ - custom_types/attworkflowdriverservice.yaml
+ - custom_types/serviceinstanceattribute.yaml
+ - custom_types/onosapp.yaml
+
+description: Configures the Flex POD with AT&T workflow
+
+topology_template:
+ node_templates:
+ # Fabric configuration
+ switch#leaf_1:
+ type: tosca.nodes.Switch
+ properties:
+ driver: ofdpa3
+ ipv4Loopback: 192.168.9.24
+ ipv4NodeSid: 19
+ isEdgeRouter: false
+ name: Fabric Switch - 1
+ ofId: of:0000cc37ab5b6da8
+ routerMac: 00:00:00:00:00:03
+
+ # Setup the OLT switch port
+ port#olt_port:
+ type: tosca.nodes.SwitchPort
+ properties:
+ portId: 7
+ host_learning: false
+ requirements:
+ - switch:
+ node: switch#leaf_1
+ relationship: tosca.relationships.BelongsToOne
+
+ # Port connected to the BNG
+ port#bng_port:
+ type: tosca.nodes.SwitchPort
+ properties:
+ portId: 8
+ requirements:
+ - switch:
+ node: switch#leaf_1
+ relationship: tosca.relationships.BelongsToOne
+
+ # Setup the fabric switch port where the external
+ # router is connected to
+ bngmapping:
+ type: tosca.nodes.BNGPortMapping
+ properties:
+ s_tag: any
+ switch_port: 8
+
+ # DHCP L2 Relay config
+ onos_app#dhcpl2relay:
+ type: tosca.nodes.ONOSApp
+ properties:
+ name: dhcpl2relay
+ must-exist: true
+
+ dhcpl2relay-config-attr:
+ type: tosca.nodes.ServiceInstanceAttribute
+ properties:
+ name: /onos/v1/network/configuration/apps/org.opencord.dhcpl2relay
+ value: >
+ {
+ "dhcpl2relay" : {
+ "useOltUplinkForServerPktInOut" : false,
+ "dhcpServerConnectPoints" : [ "of:0000cc37ab5b6da8/8" ]
+ }
+ }
+ requirements:
+ - service_instance:
+ node: onos_app#dhcpl2relay
+ relationship: tosca.relationships.BelongsToOne
+
+ # ONU Whitelist
+ service#att:
+ type: tosca.nodes.AttWorkflowDriverService
+ properties:
+ name: att-workflow-driver
+ must-exist: true
+
+ ALPHe3d1cfa7:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: ALPHe3d1cfa7
+ pon_port_id: 536870912
+ device_id: of:000000000ac004ce
+ requirements:
+ - owner:
+ node: service#att
+ relationship: tosca.relationships.BelongsToOne
diff --git a/tosca-configs/att-workflow/flex-pod1-olt-1.0-olt.yaml b/tosca-configs/att-workflow/flex-pod1-olt-1.0-olt.yaml
new file mode 100755
index 0000000..a00311b
--- /dev/null
+++ b/tosca-configs/att-workflow/flex-pod1-olt-1.0-olt.yaml
@@ -0,0 +1,47 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @flex-pod1-olt-olt.yaml http://10.192.4.241:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/oltdevice.yaml
+ - custom_types/onudevice.yaml
+ - custom_types/voltservice.yaml
+description: Create a simulated OLT Device in VOLTHA
+topology_template:
+ node_templates:
+
+ service#volt:
+ type: tosca.nodes.VOLTService
+ properties:
+ name: volt
+ must-exist: true
+
+ olt_device:
+ type: tosca.nodes.OLTDevice
+ properties:
+ name: olt-1
+ device_type: openolt
+ host: 10.192.4.206
+ port: 9191
+ switch_datapath_id: of:0000cc37ab5b6da8
+ switch_port: "7"
+ outer_tpid: "0x8100"
+ uplink: "65536"
+ nas_id: "NAS_ID"
+ requirements:
+ - volt_service:
+ node: service#volt
+ relationship: tosca.relationships.BelongsToOne
diff --git a/tosca-configs/att-workflow/flex-pod1-olt-1.0-subscriber.yaml b/tosca-configs/att-workflow/flex-pod1-olt-1.0-subscriber.yaml
new file mode 100755
index 0000000..4914bfd
--- /dev/null
+++ b/tosca-configs/att-workflow/flex-pod1-olt-1.0-subscriber.yaml
@@ -0,0 +1,37 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @onlab-pod1-subscriber.yaml http://10.90.0.101:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/rcordsubscriber.yaml
+
+description: Pre-provsion a subscriber
+
+topology_template:
+ node_templates:
+
+ # Pre-provision the subscriber the subscriber
+ my_house:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: My House-305
+ status: pre-provisioned
+ s_tag: 111
+ c_tag: 999
+ onu_device: ALPHe3d1cfa7
+ nas_port_id : "PON 1/1/03/1:1.1.1"
+ circuit_id: foo1
+ remote_id: bar1
diff --git a/tosca-configs/att-workflow/onlab-pod1-1.0-fabric.yaml b/tosca-configs/att-workflow/onlab-pod1-1.0-fabric.yaml
new file mode 100755
index 0000000..0f9ddb0
--- /dev/null
+++ b/tosca-configs/att-workflow/onlab-pod1-1.0-fabric.yaml
@@ -0,0 +1,135 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @onlab-pod1-fabric.yaml http://10.90.0.101:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/switch.yaml
+ - custom_types/switchport.yaml
+ - custom_types/portinterface.yaml
+ - custom_types/bngportmapping.yaml
+ - custom_types/attworkflowdriverwhitelistentry.yaml
+ - custom_types/attworkflowdriverservice.yaml
+ - custom_types/serviceinstanceattribute.yaml
+ - custom_types/onosapp.yaml
+
+description: Configures the ONF SEBA POD with AT&T workflow
+
+topology_template:
+ node_templates:
+ # Fabric configuration
+ switch#leaf_1:
+ type: tosca.nodes.Switch
+ properties:
+ driver: ofdpa3
+ ipv4Loopback: 192.168.0.201
+ ipv4NodeSid: 17
+ isEdgeRouter: True
+ name: AGG_SWITCH
+ ofId: of:0000000000000001
+ routerMac: 00:00:02:01:06:01
+
+ # Setup the OLT switch port
+ port#olt_port:
+ type: tosca.nodes.SwitchPort
+ properties:
+ portId: 1
+ host_learning: false
+ requirements:
+ - switch:
+ node: switch#leaf_1
+ relationship: tosca.relationships.BelongsToOne
+
+ # Port connected to the BNG
+ port#bng_port:
+ type: tosca.nodes.SwitchPort
+ properties:
+ portId: 31
+ requirements:
+ - switch:
+ node: switch#leaf_1
+ relationship: tosca.relationships.BelongsToOne
+
+ # Setup the fabric switch port where the external
+ # router is connected to
+ bngmapping:
+ type: tosca.nodes.BNGPortMapping
+ properties:
+ s_tag: any
+ switch_port: 31
+
+ # DHCP L2 Relay config
+ onos_app#dhcpl2relay:
+ type: tosca.nodes.ONOSApp
+ properties:
+ name: dhcpl2relay
+ must-exist: true
+
+ dhcpl2relay-config-attr:
+ type: tosca.nodes.ServiceInstanceAttribute
+ properties:
+ name: /onos/v1/network/configuration/apps/org.opencord.dhcpl2relay
+ value: >
+ {
+ "dhcpl2relay" : {
+ "useOltUplinkForServerPktInOut" : false,
+ "dhcpServerConnectPoints" : [ "of:0000000000000001/31" ]
+ }
+ }
+ requirements:
+ - service_instance:
+ node: onos_app#dhcpl2relay
+ relationship: tosca.relationships.BelongsToOne
+
+ # ONU Whitelist
+ service#att:
+ type: tosca.nodes.AttWorkflowDriverService
+ properties:
+ name: att-workflow-driver
+ must-exist: true
+
+ BRCM22222222:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: BRCM22222222
+ # pon_port_id: 536870912
+ pon_port_id: 12345678
+ device_id: of:000000000a5a0072
+ requirements:
+ - owner:
+ node: service#att
+ relationship: tosca.relationships.BelongsToOne
+
+ ALPHe3d1cfde:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: ALPHe3d1cfde
+ pon_port_id: 536870912
+ device_id: of:000000000a5a0072
+ requirements:
+ - owner:
+ node: service#att
+ relationship: tosca.relationships.BelongsToOne
+
+ ISKT71e801a0:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: ISKT71e801a0
+ pon_port_id: 536870912
+ device_id: of:000000000a5a0072
+ requirements:
+ - owner:
+ node: service#att
+ relationship: tosca.relationships.BelongsToOne
diff --git a/tosca-configs/att-workflow/onlab-pod1-1.0-olt.yaml b/tosca-configs/att-workflow/onlab-pod1-1.0-olt.yaml
new file mode 100755
index 0000000..c94b5e1
--- /dev/null
+++ b/tosca-configs/att-workflow/onlab-pod1-1.0-olt.yaml
@@ -0,0 +1,100 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @onlab-pod1-olt.yaml http://10.90.0.101:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/oltdevice.yaml
+ - custom_types/onudevice.yaml
+ - custom_types/voltservice.yaml
+ - custom_types/attworkflowdriverwhitelistentry.yaml
+ - custom_types/attworkflowdriverservice.yaml
+ - custom_types/rcordsubscriber.yaml
+ - custom_types/switch.yaml
+ - custom_types/switchport.yaml
+description: Create a simulated OLT Device in VOLTHA
+topology_template:
+ node_templates:
+
+ service#volt:
+ type: tosca.nodes.VOLTService
+ properties:
+ name: volt
+ must-exist: true
+
+ # CIG
+ olt_device:
+ type: tosca.nodes.OLTDevice
+ properties:
+ name: CIG
+ device_type: openolt
+ host: 10.90.0.115
+ port: 10400
+ switch_datapath_id: of:0000000000000001
+ switch_port: "4"
+ outer_tpid: "0x8100"
+ uplink: "65536"
+ nas_id: "NAS_ID"
+ requirements:
+ - volt_service:
+ node: service#volt
+ relationship: tosca.relationships.BelongsToOne
+
+ # Whitelist
+ service#att:
+ type: tosca.nodes.AttWorkflowDriverService
+ properties:
+ name: att-workflow-driver
+ must-exist: true
+
+ CIG:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: CIGG70606829
+ pon_port_id: 536870913
+ device_id: of:000000000a5a0073
+ requirements:
+ - owner:
+ node: service#att
+ relationship: tosca.relationships.BelongsToOne
+
+ # Pre-provision the subscriber
+ cig_subscriber_1:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: Sub_CIGG70606829
+ status: pre-provisioned
+ c_tag: 444
+ s_tag: 444
+ onu_device: CIGG70606829
+ nas_port_id : "PON 1/1/03/1:1.1.1"
+ circuit_id: foo1
+ remote_id: bar1
+
+ switch#leaf_1:
+ type: tosca.nodes.Switch
+ properties:
+ name: AGG_SWITCH
+ must-exist: true
+
+ port#cig_olt_port:
+ type: tosca.nodes.SwitchPort
+ properties:
+ portId: 4
+ host_learning: false
+ requirements:
+ - switch:
+ node: switch#leaf_1
+ relationship: tosca.relationships.BelongsToOne
\ No newline at end of file
diff --git a/tosca-configs/att-workflow/onlab-pod1-1.0-subscriber.yaml b/tosca-configs/att-workflow/onlab-pod1-1.0-subscriber.yaml
new file mode 100755
index 0000000..5ee3c0c
--- /dev/null
+++ b/tosca-configs/att-workflow/onlab-pod1-1.0-subscriber.yaml
@@ -0,0 +1,61 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @onlab-pod1-subscriber.yaml http://10.90.0.101:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/rcordsubscriber.yaml
+
+description: Pre-provsion a subscriber
+
+topology_template:
+ node_templates:
+
+ # Pre-provision the subscriber the subscriber
+ onf_subscriber_1:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: Sub_BRCM22222222
+ status: pre-provisioned
+ c_tag: 111
+ s_tag: 111
+ onu_device: BRCM22222222
+ nas_port_id : "PON 1/1/03/1:1.1.1"
+ circuit_id: foo1
+ remote_id: bar1
+
+ onf_subscriber_2:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: Sub_ALPHe3d1cfde
+ status: pre-provisioned
+ c_tag: 112
+ s_tag: 111
+ onu_device: ALPHe3d1cfde
+ nas_port_id : "PON 1/1/04/1:1.1.1"
+ circuit_id: foo2
+ remote_id: bar2
+
+ onf_subscriber_3:
+ type: tosca.nodes.RCORDSubscriber
+ properties:
+ name: Sub_ISKT71e801a0
+ status: pre-provisioned
+ c_tag: 113
+ s_tag: 111
+ onu_device: ISKT71e801a0
+ nas_port_id : "PON 1/1/05/1:1.1.1"
+ circuit_id: foo3
+ remote_id: bar3