Adding config for ONF-p4-demo-pod and att-workflow
Change-Id: I77c88c67faf589e2fe437dc75db4cc3fff74841a
diff --git a/tosca-configs/att-workflow/onf-p4-demo-pod-fabric.yaml b/tosca-configs/att-workflow/onf-p4-demo-pod-fabric.yaml
new file mode 100644
index 0000000..92aa0b5
--- /dev/null
+++ b/tosca-configs/att-workflow/onf-p4-demo-pod-fabric.yaml
@@ -0,0 +1,129 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @onf-demo-pod-fabric.yaml http://192.168.100.1:30007/run
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+imports:
+ - custom_types/switch.yaml
+ - custom_types/switchport.yaml
+ - custom_types/portinterface.yaml
+ - custom_types/fabricipaddress.yaml
+ - custom_types/serviceinstanceattribute.yaml
+ - custom_types/onosapp.yaml
+ - custom_types/vrouterserviceinstance.yaml
+ - custom_types/vrouterstaticroute.yaml
+ - custom_types/servicegraphconstraint.yaml
+ - custom_types/attworkflowdriverwhitelistentry.yaml
+ - custom_types/attworkflowdriverservice.yaml
+
+description: Configures the fabric and the whitelist
+
+topology_template:
+ node_templates:
+
+ # Fabric configuration
+ switch#leaf_1:
+ type: tosca.nodes.Switch
+ properties:
+ driver: ofdpa3
+ ipv4Loopback: 192.168.0.201
+ ipv4NodeSid: 17
+ isEdgeRouter: True
+ name: AGG_SWITCH
+ ofId: of:0000000000000001
+ routerMac: 00:00:02:01:06:01
+
+ # Setup the OLT switch port
+ port#olt_port:
+ type: tosca.nodes.SwitchPort
+ properties:
+ portId: 1
+ host_learning: false
+ requirements:
+ - switch:
+ node: switch#leaf_1
+ relationship: tosca.relationships.BelongsToOne
+
+
+ # Port connected to the BNG
+ port#bng_port:
+ type: tosca.nodes.SwitchPort
+ properties:
+ portId: 31
+ requirements:
+ - switch:
+ node: switch#leaf_1
+ relationship: tosca.relationships.BelongsToOne
+
+ # Setup the fabric switch port where the external
+ # router is connected to
+ bngmapping:
+ type: tosca.nodes.BNGPortMapping
+ properties:
+ s_tag: any
+ switch_port: 31
+
+
+ # DHCP L2 Relay config
+ onos_app#dhcpl2relay:
+ type: tosca.nodes.ONOSApp
+ properties:
+ name: dhcpl2relay
+ must-exist: true
+
+ dhcpl2relay-config-attr:
+ type: tosca.nodes.ServiceInstanceAttribute
+ properties:
+ name: /onos/v1/network/configuration/apps/org.opencord.dhcpl2relay
+ value: >
+ {
+ "dhcpl2relay" : {
+ "useOltUplinkForServerPktInOut" : false,
+ "dhcpServerConnectPoints" : [ "of:0000000000000001/31" ]
+ }
+ }
+ requirements:
+ - service_instance:
+ node: onos_app#dhcpl2relay
+ relationship: tosca.relationships.BelongsToOne
+
+ # ONU Whitelist
+ service#attworkflow:
+ type: tosca.nodes.AttWorkflowDriverService
+ properties:
+ name: att-workflow-driver
+ must-exist: true
+
+ ALPHe3d1cfe3:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: ALPHe3d1cfe3
+ pon_port_id: 536870912
+ device_id: of:00000000c0a86470
+ requirements:
+ - owner:
+ node: service#attworkflow
+ relationship: tosca.relationships.BelongsToOne
+
+ ISKT71e80080:
+ type: tosca.nodes.AttWorkflowDriverWhiteListEntry
+ properties:
+ serial_number: ISKT71e80080
+ pon_port_id: 536870912
+ device_id: of:00000000c0a86470
+ requirements:
+ - owner:
+ node: service#attworkflow
+ relationship: tosca.relationships.BelongsToOne