Adding config files for nttcomm deployment
Change-Id: I1197adbfcb25bdc1b9e7b7e9e24aeb27a510bccc
(cherry picked from commit 0a00e1d7f9856756ba49c20c5f3fe1dbce9a38e1)
(cherry picked from commit 1518c50a390f7eaeb275790b9c1471f95094d26e)
diff --git a/deployment-configs/nttcomm-pod1.yml b/deployment-configs/nttcomm-pod1.yml
new file mode 100644
index 0000000..0dca8db
--- /dev/null
+++ b/deployment-configs/nttcomm-pod1.yml
@@ -0,0 +1,76 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Automated deployment configuration for QCT POD 1
+
+---
+
+pod_config:
+ repo_url: 'https://gerrit.opencord.org/pod-configs'
+ file_name: 'nttcomm-pod1.yml'
+
+make_release: 'true'
+
+maas:
+ ip: '192.168.18.60'
+ api_key: 'aCdu75LWyhMqMX9C6g:q6s39tsvRzLesSUXa5:VgrbVQx5FpQwk3PmJLED82RVSn2AqpPS'
+ head_system_id: 'h4ecwg'
+
+dev_node:
+ name: 'nttcomm-cord-pod1'
+ user: 'cord'
+
+head:
+ ip: '192.168.18.61'
+ user: 'cord'
+ pass: 'cord'
+
+compute_nodes:
+ -
+ ipmi:
+ ip: '192.168.18.52'
+ user: 'OCPQ'
+ pass: 'OCPQ'
+ -
+ ipmi:
+ ip: '192.168.18.53'
+ user: 'OCPQ'
+ pass: 'OCPQ'
+ -
+ ipmi:
+ ip: '192.168.18.54'
+ user: 'OCPQ'
+ pass: 'OCPQ'
+
+fabric_switches:
+ -
+ mac: 'cc:37:ab:a0:e5:bd'
+ ip: '10.6.0.101'
+ user: 'root'
+ pass: 'onl'
+ -
+ mac: 'cc:37:ab:a0:e4:37'
+ ip: '10.6.0.102'
+ user: 'root'
+ pass: 'onl'
+ -
+ mac: 'cc:37:ab:a0:e3:b5'
+ ip: '10.6.0.103'
+ user: 'root'
+ pass: 'onl'
+ -
+ mac: 'cc:37:ab:a0:dd:9d'
+ ip: '10.6.0.104'
+ user: 'root'
+ pass: 'onl'
diff --git a/nttcomm-pod1.yml b/nttcomm-pod1.yml
new file mode 100644
index 0000000..14e2fb8
--- /dev/null
+++ b/nttcomm-pod1.yml
@@ -0,0 +1,77 @@
+
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+---
+
+cord_scenario: cord
+cord_profile: rcord
+
+vagrant_vms:
+ - 'corddev'
+
+# Variables
+credentials_dir: '/opt/credentials'
+pki_dir: '/opt/pki'
+ssh_pki_dir: '/opt/ssh_pki'
+
+fabric_ip: '10.6.1.1/24'
+management_ip: '10.6.0.1/24'
+external_ip: '192.168.18.61/24'
+external_gw: '192.168.18.251'
+external_iface: 'eno1'
+management_network: 10.6.0.0/24
+
+deploy_docker_registry: "192.168.18.61:5000"
+
+headnode: cord@192.168.18.61
+
+# NOTE: The `host_cord_profile_dir` variable below is the path to the cord_profile dir that
+# gets mounted to corddev VM.This `cord_profile` dir typically lives in a directory
+# one level up from the `cord` directory
+host_cord_profile_dir: "/var/jenkins_home/workspace/cord_profile"
+
+build_targets:
+ - 'setup-automation'
+
+copy_cord_prereqs:
+ - 'config-ssh-key'
+
+skipTags:
+ - 'set_compute_node_password'
+
+# Wait until headnode prepped before building containers, for consistent DNS
+docker_images_prereqs:
+ - 'prep-headnode'
+
+# node topology
+physical_node_list:
+ - name: head1
+ aliases:
+ - head
+
+# Inventory for ansible, used to generate inventory.ini
+inventory_groups:
+ config:
+ localhost:
+ ansible_connection: local
+ build:
+ corddev:
+ head:
+ head1:
+ ansible_host: 192.168.18.61
+ ansible_port: 22
+ ansible_user: cord
+ ansible_ssh_pass: cord
+ compute: