Merge "[VOL-4298] Added menlo-certification-pod-radisys-3200g DT job configs" into voltha-2.8
diff --git a/deployment-configs/menlo-certification-pod-radisys-3200g-DT.yaml b/deployment-configs/menlo-certification-pod-radisys-3200g-DT.yaml
new file mode 100644
index 0000000..51022f7
--- /dev/null
+++ b/deployment-configs/menlo-certification-pod-radisys-3200g-DT.yaml
@@ -0,0 +1,147 @@
+---
+
+ # Copyright 2020-present Open Networking Foundation
+ #
+ # Licensed under the Apache License, Version 2.0 (the "License");
+ # you may not use this file except in compliance with the License.
+ # You may obtain a copy of the License at
+ #
+ # http://www.apache.org/licenses/LICENSE-2.0
+ #
+ # Unless required by applicable law or agreed to in writing, software
+ # distributed under the License is distributed on an "AS IS" BASIS,
+ # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ # See the License for the specific language governing permissions and
+ # limitations under the License.
+
+ # Automated deployment configuration for Tucson pod
+
+ # Change default values in tests
+ ONOS_REST_PORT: 30120
+ ONOS_SSH_PORT: 30115
+ OLT_PORT: 9191
+ KUBERNETES_CONF: $HOME/.kube/kind-config-voltha-minimal
+
+# This tells the control node how to reach the Kubernetes nodes.
+ nodes:
+ -
+ ip: '10.90.0.240'
+ user: 'cord'
+ pass: 'cord'
+ -
+ ip: '10.90.0.241'
+ user: 'cord'
+ pass: 'cord'
+
+ fabric_switches:
+ -
+ mac: '8c:ea:1b:a7:29:72'
+ ip: 10.90.0.243
+ user: root
+ pass: onl
+ bngPort: 31
+ device_id: 'of:0000000000000001'
+
+ olts:
+ # Gpon OLT
+ -
+ ip: 10.90.0.244
+ sship: 10.90.0.244
+ user: root
+ pass: onl
+ fortygig: True
+ aggPort: 1
+ serial: 722033538840
+ oltDebVersion: openolt_rlt-3200g-w-40g-3.5.1-dev-262b6293cdeda78317dda9d3a6cfab0e7ebfbf05.deb
+ board_technology: GPON
+
+ hosts:
+ src:
+ # 3200G ONU
+ -
+ ip: 10.90.0.241
+ user: cord
+ pass: cord
+ dp_iface_name: eth1.111
+ container_type: LXC
+ container_name: SCOM00001c7f
+ onu: SCOM00001c7f
+ olt: 722033538840
+ c_tag: 111
+ s_tag: 11
+ power_switch_port: 2
+ uni_id: 1
+
+ - ip: 10.90.0.240
+ user: cord
+ pass: cord
+ dp_iface_name: eth1.41
+ container_type: LXC
+ container_name: SCOMa0108af9
+ onu: SCOMa0108af9
+ olt: 722033538840
+ c_tag: 41
+ s_tag: 54
+ power_switch_port: 6
+ uni_id: 1
+
+ - ip: 10.90.0.240
+ user: cord
+ pass: cord
+ dp_iface_name: eth1.42
+ container_type: LXC
+ container_name: SCOMa0108aea
+ onu: SCOMa0108aea
+ olt: 722033538840
+ c_tag: 42
+ s_tag: 55
+ power_switch_port: 5
+ uni_id: 1
+
+ dst:
+ # 3200G OLT
+ -
+ dp_iface_ip_qinq: 10.11.11.254
+ ip: null
+ user: null
+ pass: null
+ noroot_ip: 10.90.0.241
+ noroot_user: cord
+ noroot_pass: cord
+ dp_iface_name: enp3s0d1
+ dp_iface_ip: null
+ dp_iface_gateway: null
+ container_type: null
+ container_name: null
+
+ - dp_iface_ip_qinq: 10.54.41.254
+ ip: null
+ user: null
+ pass: null
+ noroot_ip: 10.90.0.241
+ noroot_user: cord
+ noroot_pass: cord
+ dp_iface_name: enp3s0d1
+ dp_iface_ip: null
+ dp_iface_gateway: null
+ container_type: null
+ container_name: null
+
+ - dp_iface_ip_qinq: 10.55.42.254
+ ip: null
+ user: null
+ pass: null
+ noroot_ip: 10.90.0.241
+ noroot_user: cord
+ noroot_pass: cord
+ dp_iface_name: enp3s0d1
+ dp_iface_ip: null
+ dp_iface_gateway: null
+ container_type: null
+ container_name: null
+
+ web_power_switch:
+ ip: '10.90.0.250'
+ user: 'cord'
+ password: 'cord'
+ type: 'DLI'
diff --git a/kubernetes-configs/menlo-certification-pod-radisys-3200g.conf b/kubernetes-configs/menlo-certification-pod-radisys-3200g.conf
new file mode 100644
index 0000000..8ca460c
--- /dev/null
+++ b/kubernetes-configs/menlo-certification-pod-radisys-3200g.conf
@@ -0,0 +1,39 @@
+apiVersion: v1
+kind: Config
+clusters:
+- name: "voltha-certification-pod"
+ cluster:
+ server: "https://10.90.0.240:6443"
+ certificate-authority-data: "LS0tLS1CRUdJTiBDRVJUSUZJQ0FURS0tLS0tCk1JSUN3akNDQ\
+ WFxZ0F3SUJBZ0lCQURBTkJna3Foa2lHOXcwQkFRc0ZBREFTTVJBd0RnWURWUVFERXdkcmRXSmwKT\
+ FdOaE1CNFhEVEl4TURVeE1URTRNemt3TkZvWERUTXhNRFV3T1RFNE16a3dORm93RWpFUU1BNEdBM\
+ VVFQXhNSAphM1ZpWlMxallUQ0NBU0l3RFFZSktvWklodmNOQVFFQkJRQURnZ0VQQURDQ0FRb0NnZ\
+ 0VCQUw5WFFneUc4cjA0CjN5VzFCbDZwVUhKKzBPQ1RUdWhQWUo1czQwektTMzZpc1pXWS82Z21YN\
+ llMd1J5ZnYxellubDc0WWxCNGRJQXoKdXVVd2NTVFoyS3V3b25aQXNLc2NSNWJZOG53UEJUMEdRR\
+ k9QbWNEbDk0YXQ4ZGxYVzRoOHNUN1NueU01VGJHUQp2c0dHUmZWdmZUdGpPMWtML2V6VDZGSHRVM\
+ DlOamd0Z1oxam9RU21pNVp4eU1RbER0RlE4UmZWb003VnhxS1hUCjhYaTIzRlh5N3kxWGRaNVJHS\
+ WV1UVpGUUg4cUtRdEVBQVB0dG9zcGoxNVRkZlZIQndhd2EyNG00OEEweDF6aDMKRzQvaXMxZ0VFV\
+ TBmT2RGdXdNL2wyaVpZLzk4ZjhROGY2NTVMNmR6TWhEbHp0VVRnby9TbGxBWE9BdXhqTnc0cAoyQ\
+ TZ5R1VyUW9DVUNBd0VBQWFNak1DRXdEZ1lEVlIwUEFRSC9CQVFEQWdLa01BOEdBMVVkRXdFQi93U\
+ UZNQU1CCkFmOHdEUVlKS29aSWh2Y05BUUVMQlFBRGdnRUJBRWM5ZUF5RlRBbE0wTmprL2M4dWtWY\
+ jBLNzVzMGM1ZnRKbUsKc2xmeDNnUnBtamR6WUc4NWRQM3lDOVVLZnVsOFNXMUNraVc0aFljZmpST\
+ mVNTnA3MXlkWGw5Qk9DT3p2QmU1bgppZHhSR0pwaXE4RWEzWDM0SkVWMlhnNnQ2U0MvME9XampBM\
+ DUvdlI3czRKekJWUkhQMDl5STA5eVBtaHhNWlAvCkhzbSs4NWNPSDVyY09xanFGVElZK3JMUGZFd\
+ k9rNUk3OFZ0WU5pS1B2bEtnSXdJV1NJdTFyMytocnl5ZERrRHAKRkRYVFNFWlJQTzRWQTdhazhQS\
+ mNzc0FOZ1RKVlVBMTVUM1F1VW1pcDB6c0t5UGZiYVp4VzN3Qk1nc2t4K0xKUAp6dy83NmFEbk5jZ\
+ m9EbUo1SzhFYUQ4ZFUrUGJlbjVhMzUvY3pPd0pKVkxSdm83YXZlMUk9Ci0tLS0tRU5EIENFUlRJR\
+ klDQVRFLS0tLS0K"
+
+users:
+- name: "voltha-certification-pod"
+ user:
+ token: "kubeconfig-user-cvpsj.c-9j2w8:nbh49pk45tp5kwb9fbzr6fthtf6kbpdvlv8k85vbbg4x9jjcfsnn5f"
+
+
+contexts:
+- name: "voltha-certification-pod"
+ context:
+ user: "voltha-certification-pod"
+ cluster: "voltha-certification-pod"
+
+current-context: "voltha-certification-pod"
diff --git a/kubernetes-configs/voltha/menlo-certification-pod-radisys-3200g.yml b/kubernetes-configs/voltha/menlo-certification-pod-radisys-3200g.yml
new file mode 100644
index 0000000..79a9d27
--- /dev/null
+++ b/kubernetes-configs/voltha/menlo-certification-pod-radisys-3200g.yml
@@ -0,0 +1,68 @@
+# Copyright 2019 Ciena Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+global:
+ image_pullPolicy: Always
+
+onosSshPort: 30115
+onosApiPort: 30120
+onosOfPort: 31653
+
+individualOpenFlowNodePorts: true
+
+#images:
+# onos:
+# repository: "andreacampanella/voltha-onos"
+# tag: "app-update-sadis"
+
+network:
+ netconfUserSecret: ''
+
+
+deployments:
+ etcdOperator: true
+ backupOperator: false
+ restoreOperator: false
+
+voltha-etcd-cluster:
+ clusterSize: 1
+onos_env:
+- name: POD_IP
+ valueFrom:
+ fieldRef:
+ fieldPath: status.podIP
+- name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ fieldPath: metadata.namespace
+- name: ONOS_APPS
+ value: "drivers,openflow-base,hostprovider"
+
+apps:
+ - org.onosproject.lldpprovider
+ - org.onosproject.openflow-base
+ - org.onosproject.gui2
+ - org.onosproject.drivers
+ - org.onosproject.mcast
+ - org.opencord.kafka
+ - org.opencord.sadis
+ - org.opencord.dhcpl2relay
+ - org.opencord.igmpproxy
+ - org.opencord.mcast
+ - org.opencord.olt
+ - org.opencord.aaa
+
+atomix:
+ persistence:
+ enabled: false
diff --git a/tosca-configs/voltha/menlo-certification-pod-radisys-3200g-onos-netcfg-switch.json b/tosca-configs/voltha/menlo-certification-pod-radisys-3200g-onos-netcfg-switch.json
new file mode 100644
index 0000000..5ddbebd
--- /dev/null
+++ b/tosca-configs/voltha/menlo-certification-pod-radisys-3200g-onos-netcfg-switch.json
@@ -0,0 +1,24 @@
+{
+ "devices": {
+ "of:0000000000000001" : {
+ "segmentrouting" : {
+ "name" : "agg-switch",
+ "ipv4NodeSid" : 101,
+ "ipv4Loopback" : "10.6.1.254",
+ "routerMac" : "00:00:00:00:01:80",
+ "isEdgeRouter" : true,
+ "adjacencySids" : []
+ },
+ "basic" : {
+ "driver" : "ofdpa3"
+ }
+ }
+ },
+ "apps": {
+ "org.opencord.dhcpl2relay" : {
+ "dhcpl2relay" : {
+ "useOltUplinkForServerPktInOut" : true
+ }
+ }
+ }
+}