Update qct-pod config to master syntax
Change-Id: I425df51d98316141de097eb0287f2b4768c66853
diff --git a/qct-pod1.yml b/qct-pod1.yml
index 255ec01..5c684df 100644
--- a/qct-pod1.yml
+++ b/qct-pod1.yml
@@ -1,32 +1,64 @@
-# Deployment configuration for a phyical hardware POD
+# Deployment configuration for a physical hardware POD
---
-seedServer:
- # IP address of the head node
- ip: '10.201.101.11'
-
- # User name and password used by Ansible to connect to the host for remote
- # provisioning
- user: 'ubuntu'
- password: 'ubuntu'
+# this is used to generate the genconfig/cord-inv file
+headnode:
+ ip: '10.201.101.11'
+ ansible_user: 'cord'
+ ansible_ssh_pass: 'cord'
+ ansible_ssh_port: 22
+
+common:
+
+ # set to the profile of cord you want to install
+ cord_profile: 'rcord'
+
+ # directories on the head node that the cord dir is copied to, and profile is created in
+ cord_dir: '/opt/cord'
+ cord_profile_dir: '/opt/cord_profile'
+
+
+ # all of these are written to genconfig/config.yml, and needs a rework
+
+ # Network address information for the head node:
+ #
+ # fabric_ip - the IP address and mask bits to be used to configure the network
+ # interface connected to the leaf - spine fabric
+ #
+ # management_ip - the IP address and mask bits to be used to configure the network
+ # interface connecting the head node to the POD internal
+ # management network. The head node will deliver DHCP addresses to
+ # the other compute nodes over this interface
+ #
+ # external_ip - the IP address and mask bits to be used to configure the network
+ # interface connecting the head node (and the POD) to the
+ # Internet. All traffic in the POD to external hosts will be
+ # NAT-ed through this interface
fabric_ip: '10.6.1.1/24'
management_ip: '10.6.0.1/24'
external_ip: '10.201.101.11/24'
- #external_iface: 'eth2'
- management_network: 10.6.0.0/24
-
+ external_iface: 'eth2'
+ external_gw: '10.201.101.1'
skipTags:
- # - 'reboot'
- extraVars:
- - 'management_ignore_names=eth2'
- - 'fabric_ignore_names=eth2'
+extraVars:
+ - 'management_ignore_names=eth0'
-# If passwords are not set, random passwords will be generated
passwords:
- #compute_node: ubuntu
- #maas_admin: admin
- #maas_user: cord
+ compute_node: "ubuntu"
+ maas_admin: "admin"
+ maas_user: "cord"
docker:
imageVersion: candidate
+
+otherNodes:
+ # Experimental
+ #
+ # Specifies the subnet and address range that will be used to allocate IP addresses
+ # to the compute nodes as they are deployed into the POD.
+ fabric:
+ network: 10.6.1.1/24
+ range_low: 10.6.1.2
+ range_high: 10.6.1.253
+