ON.Lab test POD config
Change-Id: I5438fb422c80fba88be99026aa46ca12175bc733
diff --git a/onlab.yml b/onlab.yml
new file mode 100644
index 0000000..bbe2b5e
--- /dev/null
+++ b/onlab.yml
@@ -0,0 +1,47 @@
+# Deployment configuration for a physical hardware POD
+---
+seedServer:
+ ip: '10.90.0.251'
+ # User name and password used by Ansible to connect to the host for remote
+ # provisioning. These default values are used for automated testing, change
+ # with care.
+ user: 'cord'
+ password: 'cord'
+ # Network address information for the head node:
+ #
+ # fabric_ip - the IP address and mask bits to be used to configure the network
+ # interface connected to the leaf - spine fabric
+ #
+ # management_ip - the IP address and mask bits to be used to configure the network
+ # interface connecting the head node to the POD internal
+ # management network. The head node will deliver DHCP addresses to
+ # the other compute nodes over this interface
+ #
+ # external_ip - the IP address and mask bits to be used to configure the network
+ # interface connecting the head node (and the POD) to the
+ # Internet. All traffic in the POD to external hosts will be
+ # NAT-ed through this interface
+ fabric_ip: '10.6.1.1/24'
+ management_ip: '10.6.0.1/24'
+ external_ip: '10.90.0.251/16'
+ external_iface: 'eth0'
+ external_gw: '10.90.0.1'
+ skipTags:
+
+passwords:
+ compute_node: "ubuntu"
+ maas_admin: "admin"
+ maas_user: "cord"
+
+docker:
+ imageVersion: candidate
+
+otherNodes:
+ # Experimental
+ #
+ # Specifies the subnet and address range that will be used to allocate IP addresses
+ # to the compute nodes as they are deployed into the POD.
+ fabric:
+ network: 10.6.1.1/24
+ range_low: 10.6.1.2
+ range_high: 10.6.1.253