ospfd: Fix maxage/flush to not try flood twice, remember maxages for longer
2006-05-30 Paul Jakma <paul.jakma@sun.com>
* (general) Fix confusion around MaxAge-ing and problem with
high-latency networks. Analysis and suggested fixes by
Phillip Spagnolo, in [quagga-dev 4132], on which this commit
expands slightly.
* ospf_flood.{c,h}: (ospf_lsa_flush) new function.
Scope-general form of existing flush functions, essentially
the dormant ospf_maxage_flood() but without the ambiguity of
whether it is responsible for flooding.
* ospf_lsa.c: (ospf_lsa_maxage) Role minimised to simply setup
LSA on the Maxage list and schedule removal - no more.
ospf_lsa_flush* being the primary way to kick-off flushes
of LSAs.
Don't hardcode the remover-timer value, which was too
short for very high-latency networks.
(ospf_maxage_lsa_remover) Just do what needs to be done to
remove maxage LSAs from the maxage list, remove the call
to ospf_flood_through().
Don't hardcode remove-timer value.
(ospf_lsa_{install,flush_schedule}) ospf_lsa_flush is the correct
entrypoint to flushing maxaged LSAs.
(lsa_header_set) Use a define for the initial age, useful for
testing.
* ospf_opaque.c: (ospf_opaque_lsa_refresh) ditto.
(ospf_opaque_lsa_flush_schedule) ditto.
* ospfd.h: ({struct ospf,ospf_new}) Add maxage_delay parameter,
interval to wait before running the maxage_remover. Supply a
suitable default.
Add a define for OSPF_LSA_INITIAL_AGE, see lsa_header_set().
diff --git a/ospfd/ospf_lsa.c b/ospfd/ospf_lsa.c
index bdc4015..6f5ee3d 100644
--- a/ospfd/ospf_lsa.c
+++ b/ospfd/ospf_lsa.c
@@ -372,7 +372,7 @@
lsah = (struct lsa_header *) STREAM_DATA (s);
- lsah->ls_age = htons (0);
+ lsah->ls_age = htons (OSPF_LSA_INITIAL_AGE);
lsah->options = options;
lsah->type = type;
lsah->id = id;
@@ -2762,7 +2762,7 @@
new->data->type,
inet_ntoa (new->data->id),
lsa);
- ospf_lsa_maxage (ospf, lsa);
+ ospf_lsa_flush (ospf, lsa);
}
return new;
@@ -2794,35 +2794,6 @@
}
-#ifdef ORIGINAL_CODING
-/* This function flood the maxaged LSA to DR. */
-void
-ospf_maxage_flood (struct ospf_lsa *lsa)
-{
- switch (lsa->data->type)
- {
- case OSPF_ROUTER_LSA:
- case OSPF_NETWORK_LSA:
- case OSPF_SUMMARY_LSA:
- case OSPF_ASBR_SUMMARY_LSA:
- case OSPF_AS_NSSA_LSA:
-#ifdef HAVE_OPAQUE_LSA
- case OSPF_OPAQUE_LINK_LSA:
- case OSPF_OPAQUE_AREA_LSA:
-#endif /* HAVE_OPAQUE_LSA */
- ospf_flood_through_area (lsa->area, NULL, lsa);
- break;
- case OSPF_AS_EXTERNAL_LSA:
-#ifdef HAVE_OPAQUE_LSA
- case OSPF_OPAQUE_AS_LSA:
-#endif /* HAVE_OPAQUE_LSA */
- ospf_flood_through_as (NULL, lsa);
- break;
- default:
- break;
- }
-}
-#endif /* ORIGINAL_CODING */
static int
ospf_maxage_lsa_remover (struct thread *thread)
@@ -2862,13 +2833,6 @@
zlog_debug ("LSA[Type%d:%s]: MaxAge LSA removed from list",
lsa->data->type, inet_ntoa (lsa->data->id));
- /* Flood max age LSA. */
-#ifdef ORIGINAL_CODING
- ospf_maxage_flood (lsa);
-#else /* ORIGINAL_CODING */
- ospf_flood_through (ospf, NULL, lsa);
-#endif /* ORIGINAL_CODING */
-
if (CHECK_FLAG (lsa->flags, OSPF_LSA_PREMATURE_AGE))
{
if (IS_DEBUG_OSPF (lsa, LSA_FLOODING))
@@ -2892,7 +2856,8 @@
neighbor Link state retransmission lists and b) none of the router's
neighbors are in states Exchange or Loading. */
if (reschedule)
- OSPF_TIMER_ON (ospf->t_maxage, ospf_maxage_lsa_remover, 2);
+ OSPF_TIMER_ON (ospf->t_maxage, ospf_maxage_lsa_remover,
+ ospf->maxage_delay);
return 0;
}
@@ -2910,6 +2875,11 @@
}
}
+/* Add LSA onto the MaxAge list, and schedule for removal.
+ * This does *not* lead to the LSA being flooded, that must be taken
+ * care of elsewhere, see, e.g., ospf_lsa_flush* (which are callers of this
+ * function).
+ */
void
ospf_lsa_maxage (struct ospf *ospf, struct ospf_lsa *lsa)
{
@@ -2929,7 +2899,8 @@
if (IS_DEBUG_OSPF (lsa, LSA_FLOODING))
zlog_debug ("LSA[%s]: MaxAge LSA remover scheduled.", dump_lsa_key (lsa));
- OSPF_TIMER_ON (ospf->t_maxage, ospf_maxage_lsa_remover, 2);
+ OSPF_TIMER_ON (ospf->t_maxage, ospf_maxage_lsa_remover,
+ ospf->maxage_delay);
}
static int
@@ -3296,6 +3267,7 @@
switch (lsa->data->type)
{
#ifdef HAVE_OPAQUE_LSA
+ /* Opaque wants to be notified of flushes */
case OSPF_OPAQUE_LINK_LSA:
case OSPF_OPAQUE_AREA_LSA:
case OSPF_OPAQUE_AS_LSA:
@@ -3303,7 +3275,7 @@
break;
#endif /* HAVE_OPAQUE_LSA */
default:
- ospf_lsa_maxage (ospf, lsa);
+ ospf_lsa_flush (ospf, lsa);
break;
}