[isisd] Add support for Solaris DLPI

2007-08-07 James Carlson <james.d.carlson@sun.com>

	* configure.ac: Added support for separate link-layer access
	  mechanisms in isisd.
	* isis_network.c: split up into isis_bpf.c, isis_dlpi.c, and
	  isis_pfpacket.c, selected by autoconf, and added DLPI support.
	* (general) Fixed to allow compilation and use on Solaris.
diff --git a/ChangeLog b/ChangeLog
index 38ea66d..ad1c40c 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,8 @@
+2007-08-07 James Carlson <james.d.carlson@sun.com>
+
+	* configure.ac: Added support for separate link-layer access
+	  mechanisms in isisd.
+
 2007-07-27 Paul Jakma <paul.jakma@sun.com>
 
 	* configure.ac: Bump version to 0.99.8
diff --git a/configure.ac b/configure.ac
index 857f415..437767e 100755
--- a/configure.ac
+++ b/configure.ac
@@ -752,6 +752,35 @@
 AC_SUBST(KERNEL_METHOD)
 AC_SUBST(OTHER_METHOD)
 
+dnl --------------------------
+dnl Determine IS-IS I/O method
+dnl --------------------------
+AC_CHECK_HEADER(net/bpf.h)
+AC_CHECK_HEADER(sys/dlpi.h)
+AC_MSG_CHECKING(zebra IS-IS I/O method)
+if test x"$opsys" = x"gnu-linux"; then
+  AC_MSG_RESULT(pfpacket)
+  ISIS_METHOD=isis_pfpacket.o
+elif test x"$opsys" = x"sol2-6" -o x"$opsys" = x"sol8"; then
+  AC_MSG_RESULT(DLPI)
+  ISIS_METHOD="isis_dlpi.o"
+else
+  if test $ac_cv_header_net_bpf_h = no; then
+    if test $ac_cv_header_sys_dlpi_h = no; then
+      AC_MSG_RESULT(none)
+      AC_MSG_WARN([*** IS-IS support will not be built ***])
+      ISISD=""
+    else
+      AC_MSG_RESULT(DLPI)
+    fi
+    ISIS_METHOD="isis_dlpi.o"
+  else
+    AC_MSG_RESULT(BPF)
+    ISIS_METHOD="isis_bpf.o"
+  fi
+fi
+AC_SUBST(ISIS_METHOD)
+
 dnl ------------------------------------
 dnl check for broken CMSG_FIRSTHDR macro
 dnl ------------------------------------
diff --git a/isisd/ChangeLog b/isisd/ChangeLog
index 8797af1..c2482f0 100644
--- a/isisd/ChangeLog
+++ b/isisd/ChangeLog
@@ -1,3 +1,9 @@
+2007-07-18 James Carlson <james.d.carlson@sun.com>
+
+	* isis_network.c: split up into isis_bpf.c, isis_dlpi.c, and
+	  isis_pfpacket.c, selected by autoconf, and added DLPI support.
+	* (general) Fixed to allow compilation and use on Solaris.
+
 2006-12-08 Hannes Gredler <hannes@gredler.at>
 
 	* isis_adjacency.c: (isis_new_adj) Allow NULL snpa argument.
diff --git a/isisd/Makefile.am b/isisd/Makefile.am
index 1dd5493..859facd 100644
--- a/isisd/Makefile.am
+++ b/isisd/Makefile.am
@@ -9,9 +9,11 @@
 sbin_PROGRAMS = isisd 
 SUBDIRS = topology
 
+isis_method = @ISIS_METHOD@
+
 libisis_a_SOURCES = \
 	isis_adjacency.c isis_lsp.c dict.c isis_circuit.c isis_pdu.c \
-	isis_tlv.c isisd.c isis_misc.c isis_network.c isis_zebra.c isis_dr.c \
+	isis_tlv.c isisd.c isis_misc.c isis_zebra.c isis_dr.c \
 	isis_flags.c isis_dynhn.c iso_checksum.c isis_csm.c isis_events.c \
 	isis_spf.c isis_route.c isis_routemap.c
 
@@ -26,7 +28,11 @@
 isisd_SOURCES = \
 	isis_main.c $(libisis_a_SOURCES)
 
-isisd_LDADD = @ISIS_TOPOLOGY_LIB@ ../lib/libzebra.la @LIBCAP@
+isisd_LDADD = $(isis_method) @ISIS_TOPOLOGY_LIB@ ../lib/libzebra.la @LIBCAP@
+
+isisd_DEPENDENCIES = $(isis_method)
+
+EXTRA_DIST = isis_bpf.c isis_dlpi.c isis_pfpacket.c
 
 examplesdir = $(exampledir)
 dist_examples_DATA = isisd.conf.sample
diff --git a/isisd/dict.c b/isisd/dict.c
index a333d3e..6c3e1e7 100644
--- a/isisd/dict.c
+++ b/isisd/dict.c
@@ -14,12 +14,13 @@
  * into proprietary software; there is no requirement for such software to
  * contain a copyright notice related to this source.
  *
- * $Id: dict.c,v 1.4 2005/09/25 12:04:25 hasso Exp $
- * $Name:  $
+ * $Id$
+ * $Name$
  */
 
 #include <stdlib.h>
 #include <stddef.h>
+#include "zebra.h"
 #include "zassert.h"
 #define DICT_IMPLEMENTATION
 #include "dict.h"
diff --git a/isisd/include-netbsd/iso.h b/isisd/include-netbsd/iso.h
index 714b42d..1a80aec 100644
--- a/isisd/include-netbsd/iso.h
+++ b/isisd/include-netbsd/iso.h
@@ -192,7 +192,13 @@
 #else
 /* user utilities definitions from the iso library */
 
+#ifdef SUNOS_5
+#define	__P(x)	x
+#define	__BEGIN_DECLS
+#define	__END_DECLS
+#else
 #include <sys/cdefs.h>
+#endif
 
 __BEGIN_DECLS
 struct iso_addr *iso_addr __P((const char *));
diff --git a/isisd/isis_circuit.c b/isisd/isis_circuit.c
index fe3eb82..af24988 100644
--- a/isisd/isis_circuit.c
+++ b/isisd/isis_circuit.c
@@ -26,6 +26,10 @@
 #include <netinet/if_ether.h>
 #endif
 
+#ifndef ETHER_ADDR_LEN
+#define	ETHER_ADDR_LEN	ETHERADDRL
+#endif
+
 #include "log.h"
 #include "memory.h"
 #include "if.h"
@@ -381,11 +385,13 @@
        * Get the Hardware Address
        */
 #ifdef HAVE_STRUCT_SOCKADDR_DL
+#ifndef SUNOS_5
       if (circuit->interface->sdl.sdl_alen != ETHER_ADDR_LEN)
 	zlog_warn ("unsupported link layer");
       else
 	memcpy (circuit->u.bc.snpa, LLADDR (&circuit->interface->sdl),
 		ETH_ALEN);
+#endif
 #else
       if (circuit->interface->hw_addr_len != ETH_ALEN)
 	{
@@ -447,10 +453,12 @@
    * Get the Hardware Address
    */
 #ifdef HAVE_STRUCT_SOCKADDR_DL
+#ifndef SUNOS_5
   if (circuit->interface->sdl.sdl_alen != ETHER_ADDR_LEN)
     zlog_warn ("unsupported link layer");
   else
     memcpy (circuit->u.bc.snpa, LLADDR (&circuit->interface->sdl), ETH_ALEN);
+#endif
 #else
   if (circuit->interface->hw_addr_len != ETH_ALEN)
     {
diff --git a/isisd/isis_circuit.h b/isisd/isis_circuit.h
index b5ef269..a7e719f 100644
--- a/isisd/isis_circuit.h
+++ b/isisd/isis_circuit.h
@@ -69,6 +69,7 @@
   struct isis_area *area;	/* back pointer to the area */
   struct interface *interface;	/* interface info from z */
   int fd;			/* IS-IS l1/2 socket */
+  int sap_length;		/* SAP length for DLPI */
   struct nlpids nlpids;
   /*
    * Threads
diff --git a/isisd/isis_network.c b/isisd/isis_network.c
deleted file mode 100644
index 56459ec..0000000
--- a/isisd/isis_network.c
+++ /dev/null
@@ -1,643 +0,0 @@
-/*
- * IS-IS Rout(e)ing protocol - isis_network.c   
- *
- * Copyright (C) 2001,2002    Sampo Saaristo
- *                            Tampere University of Technology      
- *                            Institute of Communications Engineering
- *
- * This program is free software; you can redistribute it and/or modify it 
- * under the terms of the GNU General Public Licenseas published by the Free 
- * Software Foundation; either version 2 of the License, or (at your option) 
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,but WITHOUT 
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for 
- * more details.
-
- * You should have received a copy of the GNU General Public License along 
- * with this program; if not, write to the Free Software Foundation, Inc., 
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#include <zebra.h>
-#ifdef GNU_LINUX
-#include <net/ethernet.h>	/* the L2 protocols */
-#else
-#include <net/if.h>
-#include <netinet/if_ether.h>
-#endif
-
-#include "log.h"
-#include "stream.h"
-#include "if.h"
-
-#include "isisd/dict.h"
-#include "isisd/include-netbsd/iso.h"
-#include "isisd/isis_constants.h"
-#include "isisd/isis_common.h"
-#include "isisd/isis_circuit.h"
-#include "isisd/isis_flags.h"
-#include "isisd/isisd.h"
-#include "isisd/isis_constants.h"
-#include "isisd/isis_circuit.h"
-#include "isisd/isis_network.h"
-
-#include "privs.h"
-
-extern struct zebra_privs_t isisd_privs;
-
-/*
- * On linux we can use the packet(7) sockets, in other OSs we have to do with
- * Berkley Packet Filter (BPF). Please tell me if you can think of a better 
- * way...
- */
-#ifdef GNU_LINUX
-#include <netpacket/packet.h>
-#else
-#include <sys/time.h>
-#include <sys/ioctl.h>
-#include <net/bpf.h>
-struct bpf_insn llcfilter[] = {
-  BPF_STMT (BPF_LD + BPF_B + BPF_ABS, ETHER_HDR_LEN),	/* check first byte */
-  BPF_JUMP (BPF_JMP + BPF_JEQ + BPF_K, ISO_SAP, 0, 5),
-  BPF_STMT (BPF_LD + BPF_B + BPF_ABS, ETHER_HDR_LEN + 1),
-  BPF_JUMP (BPF_JMP + BPF_JEQ + BPF_K, ISO_SAP, 0, 3),	/* check second byte */
-  BPF_STMT (BPF_LD + BPF_B + BPF_ABS, ETHER_HDR_LEN + 2),
-  BPF_JUMP (BPF_JMP + BPF_JEQ + BPF_K, 0x03, 0, 1),	/* check third byte */
-  BPF_STMT (BPF_RET + BPF_K, (u_int) - 1),
-  BPF_STMT (BPF_RET + BPF_K, 0)
-};
-int readblen = 0;
-u_char *readbuff = NULL;
-#endif /* GNU_LINUX */
-
-/*
- * Table 9 - Architectural constans for use with ISO 8802 subnetworks
- * ISO 10589 - 8.4.8
- */
-
-u_char ALL_L1_ISS[6] = { 0x01, 0x80, 0xC2, 0x00, 0x00, 0x14 };
-u_char ALL_L2_ISS[6] = { 0x01, 0x80, 0xC2, 0x00, 0x00, 0x15 };
-u_char ALL_ISS[6] = { 0x09, 0x00, 0x2B, 0x00, 0x00, 0x05 };
-u_char ALL_ESS[6] = { 0x09, 0x00, 0x2B, 0x00, 0x00, 0x04 };
-
-#ifdef GNU_LINUX
-static char discard_buff[8192];
-#endif
-static char sock_buff[8192];
-
-/*
- * if level is 0 we are joining p2p multicast
- * FIXME: and the p2p multicast being ???
- */
-#ifdef GNU_LINUX
-static int
-isis_multicast_join (int fd, int registerto, int if_num)
-{
-  struct packet_mreq mreq;
-
-  memset (&mreq, 0, sizeof (mreq));
-  mreq.mr_ifindex = if_num;
-  if (registerto)
-    {
-      mreq.mr_type = PACKET_MR_MULTICAST;
-      mreq.mr_alen = ETH_ALEN;
-      if (registerto == 1)
-	memcpy (&mreq.mr_address, ALL_L1_ISS, ETH_ALEN);
-      else if (registerto == 2)
-	memcpy (&mreq.mr_address, ALL_L2_ISS, ETH_ALEN);
-      else if (registerto == 3)
-	memcpy (&mreq.mr_address, ALL_ISS, ETH_ALEN);
-      else
-	memcpy (&mreq.mr_address, ALL_ESS, ETH_ALEN);
-
-    }
-  else
-    {
-      mreq.mr_type = PACKET_MR_ALLMULTI;
-    }
-#ifdef EXTREME_DEBUG
-  zlog_debug ("isis_multicast_join(): fd=%d, reg_to=%d, if_num=%d, "
-	      "address = %02x:%02x:%02x:%02x:%02x:%02x",
-	      fd, registerto, if_num, mreq.mr_address[0], mreq.mr_address[1],
-	      mreq.mr_address[2], mreq.mr_address[3], mreq.mr_address[4],
-	      mreq.mr_address[5]);
-#endif /* EXTREME_DEBUG */
-  if (setsockopt (fd, SOL_PACKET, PACKET_ADD_MEMBERSHIP, &mreq,
-		  sizeof (struct packet_mreq)))
-    {
-      zlog_warn ("isis_multicast_join(): setsockopt(): %s", safe_strerror (errno));
-      return ISIS_WARNING;
-    }
-
-  return ISIS_OK;
-}
-
-static int
-open_packet_socket (struct isis_circuit *circuit)
-{
-  struct sockaddr_ll s_addr;
-  int fd, retval = ISIS_OK;
-
-  fd = socket (PF_PACKET, SOCK_DGRAM, htons (ETH_P_ALL));
-  if (fd < 0)
-    {
-      zlog_warn ("open_packet_socket(): socket() failed %s",
-		 safe_strerror (errno));
-      return ISIS_WARNING;
-    }
-
-  /*
-   * Bind to the physical interface
-   */
-  memset (&s_addr, 0, sizeof (struct sockaddr_ll));
-  s_addr.sll_family = AF_PACKET;
-  s_addr.sll_protocol = htons (ETH_P_ALL);
-  s_addr.sll_ifindex = circuit->interface->ifindex;
-
-  if (bind (fd, (struct sockaddr *) (&s_addr),
-	    sizeof (struct sockaddr_ll)) < 0)
-    {
-      zlog_warn ("open_packet_socket(): bind() failed: %s", safe_strerror (errno));
-      return ISIS_WARNING;
-    }
-
-  circuit->fd = fd;
-
-  if (circuit->circ_type == CIRCUIT_T_BROADCAST)
-    {
-      /*
-       * Join to multicast groups
-       * according to
-       * 8.4.2 - Broadcast subnetwork IIH PDUs
-       * FIXME: is there a case only one will fail??
-       */
-      if (circuit->circuit_is_type & IS_LEVEL_1)
-	{
-	  /* joining ALL_L1_ISS */
-	  retval = isis_multicast_join (circuit->fd, 1,
-					circuit->interface->ifindex);
-	  /* joining ALL_ISS */
-	  retval = isis_multicast_join (circuit->fd, 3,
-					circuit->interface->ifindex);
-	}
-      if (circuit->circuit_is_type & IS_LEVEL_2)
-	/* joining ALL_L2_ISS */
-	retval = isis_multicast_join (circuit->fd, 2,
-				      circuit->interface->ifindex);
-    }
-  else
-    {
-      retval =
-	isis_multicast_join (circuit->fd, 0, circuit->interface->ifindex);
-    }
-
-  return retval;
-}
-
-#else
-
-static int
-open_bpf_dev (struct isis_circuit *circuit)
-{
-  int i = 0, fd;
-  char bpfdev[128];
-  struct ifreq ifr;
-  u_int16_t blen;
-  int true = 1, false = 0;
-  struct timeval timeout;
-  struct bpf_program bpf_prog;
-
-  do
-    {
-      (void) snprintf (bpfdev, sizeof (bpfdev), "/dev/bpf%d", i++);
-      fd = open (bpfdev, O_RDWR);
-    }
-  while (fd < 0 && errno == EBUSY);
-
-  if (fd < 0)
-    {
-      zlog_warn ("open_bpf_dev(): failed to create bpf socket: %s",
-		 safe_strerror (errno));
-      return ISIS_WARNING;
-    }
-
-  zlog_debug ("Opened BPF device %s", bpfdev);
-
-  memcpy (ifr.ifr_name, circuit->interface->name, sizeof (ifr.ifr_name));
-  if (ioctl (fd, BIOCSETIF, (caddr_t) & ifr) < 0)
-    {
-      zlog_warn ("open_bpf_dev(): failed to bind to interface: %s",
-		 safe_strerror (errno));
-      return ISIS_WARNING;
-    }
-
-  if (ioctl (fd, BIOCGBLEN, (caddr_t) & blen) < 0)
-    {
-      zlog_warn ("failed to get BPF buffer len");
-      blen = circuit->interface->mtu;
-    }
-
-  readblen = blen;
-
-  if (readbuff == NULL)
-    readbuff = malloc (blen);
-
-  zlog_debug ("BPF buffer len = %u", blen);
-
-  /*  BPF(4): reads return immediately upon packet reception.
-   *  Otherwise, a read will block until either the kernel
-   *  buffer becomes full or a timeout occurs. 
-   */
-  if (ioctl (fd, BIOCIMMEDIATE, (caddr_t) & true) < 0)
-    {
-      zlog_warn ("failed to set BPF dev to immediate mode");
-    }
-
-#ifdef BIOCSSEESENT
-  /*
-   * We want to see only incoming packets
-   */
-  if (ioctl (fd, BIOCSSEESENT, (caddr_t) & false) < 0)
-    {
-      zlog_warn ("failed to set BPF dev to incoming only mode");
-    }
-#endif
-
-  /*
-   * ...but all of them
-   */
-  if (ioctl (fd, BIOCPROMISC, (caddr_t) & true) < 0)
-    {
-      zlog_warn ("failed to set BPF dev to promiscuous mode");
-    }
-
-  /*
-   * If the buffer length is smaller than our mtu, lets try to increase it
-   */
-  if (blen < circuit->interface->mtu)
-    {
-      if (ioctl (fd, BIOCSBLEN, &circuit->interface->mtu) < 0)
-	{
-	  zlog_warn ("failed to set BPF buffer len (%u to %u)", blen,
-		     circuit->interface->mtu);
-	}
-    }
-
-  /*
-   * Set a timeout parameter - hope this helps select()
-   */
-  timeout.tv_sec = 600;
-  timeout.tv_usec = 0;
-  if (ioctl (fd, BIOCSRTIMEOUT, (caddr_t) & timeout) < 0)
-    {
-      zlog_warn ("failed to set BPF device timeout");
-    }
-
-  /*
-   * And set the filter
-   */
-  memset (&bpf_prog, 0, sizeof (struct bpf_program));
-  bpf_prog.bf_len = 8;
-  bpf_prog.bf_insns = &(llcfilter[0]);
-  if (ioctl (fd, BIOCSETF, (caddr_t) & bpf_prog) < 0)
-    {
-      zlog_warn ("open_bpf_dev(): failed to install filter: %s",
-		 safe_strerror (errno));
-      return ISIS_WARNING;
-    }
-
-  assert (fd > 0);
-
-  circuit->fd = fd;
-
-  return ISIS_OK;
-}
-
-#endif /* GNU_LINUX */
-
-/*
- * Create the socket and set the tx/rx funcs
- */
-int
-isis_sock_init (struct isis_circuit *circuit)
-{
-  int retval = ISIS_OK;
-
-  if (isisd_privs.change (ZPRIVS_RAISE))
-    zlog_err ("%s: could not raise privs, %s", __func__, safe_strerror (errno));
-
-#ifdef GNU_LINUX
-  retval = open_packet_socket (circuit);
-#else
-  retval = open_bpf_dev (circuit);
-#endif
-
-  if (retval != ISIS_OK)
-    {
-      zlog_warn ("%s: could not initialize the socket", __func__);
-      goto end;
-    }
-
-  if (circuit->circ_type == CIRCUIT_T_BROADCAST)
-    {
-      circuit->tx = isis_send_pdu_bcast;
-      circuit->rx = isis_recv_pdu_bcast;
-    }
-  else if (circuit->circ_type == CIRCUIT_T_P2P)
-    {
-      circuit->tx = isis_send_pdu_p2p;
-      circuit->rx = isis_recv_pdu_p2p;
-    }
-  else
-    {
-      zlog_warn ("isis_sock_init(): unknown circuit type");
-      retval = ISIS_WARNING;
-      goto end;
-    }
-
-end:
-  if (isisd_privs.change (ZPRIVS_LOWER))
-    zlog_err ("%s: could not lower privs, %s", __func__, safe_strerror (errno));
-
-  return retval;
-}
-
-static inline int
-llc_check (u_char * llc)
-{
-  if (*llc != ISO_SAP || *(llc + 1) != ISO_SAP || *(llc + 2) != 3)
-    return 0;
-
-  return 1;
-}
-
-#ifdef GNU_LINUX
-int
-isis_recv_pdu_bcast (struct isis_circuit *circuit, u_char * ssnpa)
-{
-  int bytesread, addr_len;
-  struct sockaddr_ll s_addr;
-  u_char llc[LLC_LEN];
-
-  addr_len = sizeof (s_addr);
-
-  memset (&s_addr, 0, sizeof (struct sockaddr_ll));
-
-  bytesread = recvfrom (circuit->fd, (void *) &llc,
-			LLC_LEN, MSG_PEEK,
-			(struct sockaddr *) &s_addr, (socklen_t *) &addr_len);
-
-  if (bytesread < 0)
-    {
-      zlog_warn ("isis_recv_packet_bcast(): fd %d, recvfrom (): %s",
-		 circuit->fd, safe_strerror (errno));
-      zlog_warn ("circuit is %s", circuit->interface->name);
-      zlog_warn ("circuit fd %d", circuit->fd);
-      zlog_warn ("bytesread %d", bytesread);
-      /* get rid of the packet */
-      bytesread = read (circuit->fd, discard_buff, sizeof (discard_buff));
-      return ISIS_WARNING;
-    }
-  /*
-   * Filtering by llc field, discard packets sent by this host (other circuit)
-   */
-  if (!llc_check (llc) || s_addr.sll_pkttype == PACKET_OUTGOING)
-    {
-      /*  Read the packet into discard buff */
-      bytesread = read (circuit->fd, discard_buff, sizeof (discard_buff));
-      if (bytesread < 0)
-	zlog_warn ("isis_recv_pdu_bcast(): read() failed");
-      return ISIS_WARNING;
-    }
-
-  /* on lan we have to read to the static buff first */
-  bytesread = recvfrom (circuit->fd, sock_buff, circuit->interface->mtu, 0,
-			(struct sockaddr *) &s_addr, (socklen_t *) &addr_len);
-
-  /* then we lose the LLC */
-  stream_write (circuit->rcv_stream, sock_buff + LLC_LEN, bytesread - LLC_LEN);
-
-  memcpy (ssnpa, &s_addr.sll_addr, s_addr.sll_halen);
-
-  return ISIS_OK;
-}
-
-int
-isis_recv_pdu_p2p (struct isis_circuit *circuit, u_char * ssnpa)
-{
-  int bytesread, addr_len;
-  struct sockaddr_ll s_addr;
-
-  memset (&s_addr, 0, sizeof (struct sockaddr_ll));
-  addr_len = sizeof (s_addr);
-
-  /* we can read directly to the stream */
-  bytesread = stream_recvfrom (circuit->rcv_stream, circuit->fd,
-                               circuit->interface->mtu, 0,
-                               (struct sockaddr *) &s_addr, 
-                               (socklen_t *) &addr_len);
-
-  if (s_addr.sll_pkttype == PACKET_OUTGOING)
-    {
-      /*  Read the packet into discard buff */
-      bytesread = read (circuit->fd, discard_buff, sizeof (discard_buff));
-      if (bytesread < 0)
-	zlog_warn ("isis_recv_pdu_p2p(): read() failed");
-      return ISIS_WARNING;
-    }
-
-  /* If we don't have protocol type 0x00FE which is
-   * ISO over GRE we exit with pain :)
-   */
-  if (ntohs (s_addr.sll_protocol) != 0x00FE)
-    {
-      zlog_warn ("isis_recv_pdu_p2p(): protocol mismatch(): %X",
-		 ntohs (s_addr.sll_protocol));
-      return ISIS_WARNING;
-    }
-
-  memcpy (ssnpa, &s_addr.sll_addr, s_addr.sll_halen);
-
-  return ISIS_OK;
-}
-
-int
-isis_send_pdu_bcast (struct isis_circuit *circuit, int level)
-{
-  /* we need to do the LLC in here because of P2P circuits, which will
-   * not need it
-   */
-  int written = 1;
-  struct sockaddr_ll sa;
-
-  stream_set_getp (circuit->snd_stream, 0);
-  memset (&sa, 0, sizeof (struct sockaddr_ll));
-  sa.sll_family = AF_PACKET;
-  sa.sll_protocol = htons (stream_get_endp (circuit->snd_stream) + LLC_LEN);
-  sa.sll_ifindex = circuit->interface->ifindex;
-  sa.sll_halen = ETH_ALEN;
-  if (level == 1)
-    memcpy (&sa.sll_addr, ALL_L1_ISS, ETH_ALEN);
-  else
-    memcpy (&sa.sll_addr, ALL_L2_ISS, ETH_ALEN);
-
-  /* on a broadcast circuit */
-  /* first we put the LLC in */
-  sock_buff[0] = 0xFE;
-  sock_buff[1] = 0xFE;
-  sock_buff[2] = 0x03;
-
-  /* then we copy the data */
-  memcpy (sock_buff + LLC_LEN, circuit->snd_stream->data,
-	  stream_get_endp (circuit->snd_stream));
-
-  /* now we can send this */
-  written = sendto (circuit->fd, sock_buff,
-		    stream_get_endp(circuit->snd_stream) + LLC_LEN, 0,
-		    (struct sockaddr *) &sa, sizeof (struct sockaddr_ll));
-
-  return ISIS_OK;
-}
-
-int
-isis_send_pdu_p2p (struct isis_circuit *circuit, int level)
-{
-
-  int written = 1;
-  struct sockaddr_ll sa;
-
-  stream_set_getp (circuit->snd_stream, 0);
-  memset (&sa, 0, sizeof (struct sockaddr_ll));
-  sa.sll_family = AF_PACKET;
-  sa.sll_protocol = htons (stream_get_endp (circuit->snd_stream) + LLC_LEN);
-  sa.sll_ifindex = circuit->interface->ifindex;
-  sa.sll_halen = ETH_ALEN;
-  if (level == 1)
-    memcpy (&sa.sll_addr, ALL_L1_ISS, ETH_ALEN);
-  else
-    memcpy (&sa.sll_addr, ALL_L2_ISS, ETH_ALEN);
-
-
-  /* lets try correcting the protocol */
-  sa.sll_protocol = htons (0x00FE);
-  written = sendto (circuit->fd, circuit->snd_stream->data,
-		    stream_get_endp (circuit->snd_stream), 0, 
-		    (struct sockaddr *) &sa,
-		    sizeof (struct sockaddr_ll));
-
-  return ISIS_OK;
-}
-
-#else
-
-int
-isis_recv_pdu_bcast (struct isis_circuit *circuit, u_char * ssnpa)
-{
-  int bytesread = 0, bytestoread, offset, one = 1;
-  struct bpf_hdr *bpf_hdr;
-
-  assert (circuit->fd > 0);
-
-  if (ioctl (circuit->fd, FIONREAD, (caddr_t) & bytestoread) < 0)
-    {
-      zlog_warn ("ioctl() FIONREAD failed: %s", safe_strerror (errno));
-    }
-
-  if (bytestoread)
-    {
-      bytesread = read (circuit->fd, readbuff, readblen);
-    }
-  if (bytesread < 0)
-    {
-      zlog_warn ("isis_recv_pdu_bcast(): read() failed: %s",
-		 safe_strerror (errno));
-      return ISIS_WARNING;
-    }
-
-  if (bytesread == 0)
-    return ISIS_WARNING;
-
-  bpf_hdr = (struct bpf_hdr *) readbuff;
-
-  assert (bpf_hdr->bh_caplen == bpf_hdr->bh_datalen);
-
-  offset = bpf_hdr->bh_hdrlen + LLC_LEN + ETHER_HDR_LEN;
-
-  /* then we lose the BPF, LLC and ethernet headers */
-  stream_write (circuit->rcv_stream, readbuff + offset, 
-                bpf_hdr->bh_caplen - LLC_LEN - ETHER_HDR_LEN);
-  stream_set_getp (circuit->rcv_stream, 0);
-
-  memcpy (ssnpa, readbuff + bpf_hdr->bh_hdrlen + ETHER_ADDR_LEN,
-	  ETHER_ADDR_LEN);
-
-  if (ioctl (circuit->fd, BIOCFLUSH, &one) < 0)
-    zlog_warn ("Flushing failed: %s", safe_strerror (errno));
-
-  return ISIS_OK;
-}
-
-int
-isis_recv_pdu_p2p (struct isis_circuit *circuit, u_char * ssnpa)
-{
-  int bytesread;
-
-  bytesread = stream_read (circuit->rcv_stream, circuit->fd, 
-                           circuit->interface->mtu);
-
-  if (bytesread < 0)
-    {
-      zlog_warn ("isis_recv_pdu_p2p(): read () failed: %s", safe_strerror (errno));
-      return ISIS_WARNING;
-    }
-
-  return ISIS_OK;
-}
-
-int
-isis_send_pdu_bcast (struct isis_circuit *circuit, int level)
-{
-  struct ether_header *eth;
-  int written;
-
-  stream_set_getp (circuit->snd_stream, 0);
-
-  /*
-   * First the eth header
-   */
-  eth = (struct ether_header *) sock_buff;
-  if (level == 1)
-    memcpy (eth->ether_dhost, ALL_L1_ISS, ETHER_ADDR_LEN);
-  else
-    memcpy (eth->ether_dhost, ALL_L2_ISS, ETHER_ADDR_LEN);
-  memcpy (eth->ether_shost, circuit->u.bc.snpa, ETHER_ADDR_LEN);
-  eth->ether_type = htons (stream_get_endp (circuit->snd_stream) + LLC_LEN);
-
-  /*
-   * Then the LLC
-   */
-  sock_buff[ETHER_HDR_LEN] = ISO_SAP;
-  sock_buff[ETHER_HDR_LEN + 1] = ISO_SAP;
-  sock_buff[ETHER_HDR_LEN + 2] = 0x03;
-
-  /* then we copy the data */
-  memcpy (sock_buff + (LLC_LEN + ETHER_HDR_LEN), circuit->snd_stream->data,
-	  stream_get_endp (circuit->snd_stream));
-
-  /* now we can send this */
-  written = write (circuit->fd, sock_buff,
-		   stream_get_endp (circuit->snd_stream) 
-		    + LLC_LEN + ETHER_HDR_LEN);
-
-  return ISIS_OK;
-}
-
-int
-isis_send_pdu_p2p (struct isis_circuit *circuit, int level)
-{
-  return ISIS_OK;
-}
-
-#endif /* GNU_LINUX */
diff --git a/isisd/isis_pdu.h b/isisd/isis_pdu.h
index 29c7621..95c1ee4 100644
--- a/isisd/isis_pdu.h
+++ b/isisd/isis_pdu.h
@@ -24,6 +24,10 @@
 #ifndef _ZEBRA_ISIS_PDU_H
 #define _ZEBRA_ISIS_PDU_H
 
+#ifdef __SUNPRO_C
+#pragma pack(1)
+#endif
+
 /*
  *                    ISO 9542 - 7.5,7.6
  *
@@ -222,6 +226,10 @@
 };
 #define ISIS_PSNP_HDRLEN 9
 
+#ifdef __SUNPRO_C
+#pragma pack()
+#endif
+
 /*
  * Function for receiving IS-IS PDUs
  */
diff --git a/isisd/isis_tlv.h b/isisd/isis_tlv.h
index 951a254..fc9f35f 100644
--- a/isisd/isis_tlv.h
+++ b/isisd/isis_tlv.h
@@ -152,6 +152,10 @@
   u_char LAN_addr[6];
 };
 
+#ifdef __SUNPRO_C
+#pragma pack(1)
+#endif
+
 /* struct for LSP entry */
 struct lsp_entry
 {
@@ -161,6 +165,10 @@
   u_int16_t checksum;
 } __attribute__ ((packed));
 
+#ifdef __SUNPRO_C
+#pragma pack()
+#endif
+
 /* struct for checksum */
 struct checksum
 {