I am bored. But I hate questions why there are man pages from version 0.88.
Vtysh man page looks already how it should look IMHO, the rest need more
work.
diff --git a/doc/ripd.8 b/doc/ripd.8
index 90b75b9..2f38682 100644
--- a/doc/ripd.8
+++ b/doc/ripd.8
@@ -1,229 +1,107 @@
-.TH RIPD 8 "July 2000" "Zebra" "Version 0.88"
-
+.TH RIPD 8 "10 August 2004" "Quagga RIP daemon" "Version 0.96.5"
.SH NAME
-ripd \- a RIP routing engine for use with Zebra
-
+ripd \- a RIP routing engine for use with Quagga routing software.
.SH SYNOPSIS
.B ripd
[
.B \-dhrv
+] [
+.B \-f
+.I config-file
+] [
+.B \-i
+.I pid-file
+] [
+.B \-P
+.I port-number
+] [
+.B \-A
+.I vty-address
+] [
+.B \-u
+.I user
]
-[
-.B \-f config-file
-]
-[
-.B \-i pid-file
-]
-[
-.B \-P port-number
-]
-[
-.B \-A vty-address
-]
-[
-.B \-u user
-]
-
-
.SH DESCRIPTION
-.B ripd
-is a routing component that supports the
-.B zebra
-route engine.
-.B ripd
-supports RIPv1, RIPv2, and so forth.
-
-
+.B ripd
+is a routing component that works with the
+.B Quagga
+routing engine.
.SH OPTIONS
-
+Options available for the
+.B ripd
+command:
+.SH OPTIONS
.TP
\fB\-d\fR, \fB\-\-daemon\fR
Runs in daemon mode, forking and exiting from tty.
-
.TP
\fB\-f\fR, \fB\-\-config-file \fR\fIconfig-file\fR
Specifies the config file to use for startup. If not specified this option will likely default to \fB\fI/usr/local/etc/ripd.conf\fR.
-
.TP
\fB\-h\fR, \fB\-\-help\fR
A brief message.
-
.TP
\fB\-i\fR, \fB\-\-pid_file \fR\fIpid-file\fR
When ripd starts its process idenifier is written to
\fB\fIpid-file\fR. The init system uses the recorded PID to stop or
restart ripd. The likely default is \fB\fI/var/run/ripd.pid\fR.
-
.TP
\fB\-P\fR, \fB\-\-vty_port \fR\fIport-number\fR
Specify the port that the ripd VTY will listen on. This defaults to
2602, as specified in \fB\fI/etc/services\fR.
-
.TP
\fB\-A\fR, \fB\-\-vty_addr \fR\fIvty-address\fR
Specify the address that the ripd VTY will listen on. Default is all
intrefaces.
-
.TP
\fB\-u\fR, \fB\-\-user \fR\fIuser\fR
Specify the user and group to run as. User and group have to have same
name at the moment. Default is \fIquagga\fR.
-
.TP
\fB\-r\fR, \fB\-\-retain\fR
When the program terminates, retain routes added by \fBripd\fR.
-
.TP
\fB\-v\fR, \fB\-\-version\fR
Print the version and exit.
-
-
-.SH COMMANDS
-
-\fB router rip \fR
-\fB no router rip \fR
-
-\fB rip version [1|2] \fR
-\fB no rip version [1|2] \fR
-
-\fB network [A.B.C.D/M] \fR
-\fB no network [A.B.C.D/M] \fR
-
-\fB network [IFNAME] \fR
-\fB no network [IFNAME] \fR
-
-\fB neighbor [A.B.C.D] \fR
-\fB no neighbor [A.B.C.D] \fR
-
-\fB redistribute kernel \fR
-\fB redistribute kernel metric [METRIC]\fR
-\fB redistribute kernel route-map [ROUTE-MAP]\fR
-\fB no redistribute kernel \fR
-
-\fB redistribute static \fR
-\fB redistribute static metric [METRIC]\fR
-\fB redistribute static route-map [ROUTE-MAP]\fR
-\fB no redistribute static \fR
-
-\fB redistribute connected \fR
-\fB redistribute connected metric [METRIC]\fR
-\fB redistribute connected route-map [ROUTE-MAP]\fR
-\fB no redistribute connected \fR
-
-\fB redistribute ospf \fR
-\fB redistribute ospf metric [METRIC]\fR
-\fB redistribute ospf route-map [ROUTE-MAP]\fR
-\fB no redistribute ospf \fR
-
-\fB redistribute bgp \fR
-\fB redistribute bgp metric [METRIC]\fR
-\fB redistribute bgp route-map [ROUTE-MAP]\fR
-\fB no redistribute bgp \fR
-
-\fB route [A.B.C.D/M] \fR
-\fB no route [A.B.C.D/M] \fR
-
-\fB default-information originate \fR
-\fB no default-information originate \fR
-
-\fB default-metric [METRIC] \fR
-\fB no default-metric [METRIC] \fR
-
-\fB passive-interface [IFNAME] \fR
-\fB no passive-interface [IFNAME] \fR
-
-\fB offset-list [ACCESS-LIST] [in|out]\fR
-\fB offset-list [ACCESS-LIST] [in|out] [IFNAME]\fR
-\fB no offset-list [ACCESS-LIST] [in|out]\fR
-
-\fB timers basic [UPDATE-INTERVAL] [INVALID] [TIMEOUT] [GARBAGE-COLLECT] \fR
-\fB no timers basic \fR
-
-\fB distribute-list [ACCESS-LIST] [in|out] [IFNAME] \fR
-\fB no distribute-list [ACCESS-LIST] [in|out] [IFNAME] \fR
-
-\fB distribute-list prefix [PREFIX-LIST] [in|out] [IFNAME] \fR
-\fB no distribute-list prefix [PREFIX-LIST] [in|out] [IFNAME] \fR
-
-\fB distance [DISTANCE] \fR
-\fB no distance [DISTANCE] \fR
-
-\fB distance [DISTANCE] [A.B.C.D/M] \fR
-\fB no distance [DISTANCE] [A.B.C.D/M] \fR
-
-\fB distance [DISTANCE] [A.B.C.D/M] [ACCESS-LIST]\fR
-\fB no distance [DISTANCE] [A.B.C.D/M] [ACCESS-LIST]\fR
-
-\fB ip rip send version [VERSION] \fR
-\fB no ip rip send version [VERSION] \fR
-\fB ip rip receive version [VERSION] \fR
-\fB no ip rip receive version [VERSION] \fR
-
-\fB ip rip authentication mode [md5|text]\fR
-\fB no ip rip authentication mode [md5|text]\fR
-
-\fB ip rip authentication key-chain [KEY-CHAIN]\fR
-\fB no ip rip authentication key-chain [KEY-CHAIN]\fR
-
-\fB ip rip authentication string [STRING]\fR
-\fB no ip rip authentication string [STRING]\fR
-
-\fB ip spli-horizon\fR
-\fB no ip spli-horizon\fR
-
-\fB show ip rip \fR
-\fB show ip protocols \fR
-\fB show debugging rip \fR
-
-\fB debug rip \fR
-\fB debug rip events \fR
-\fB debug rip packet \fR
-\fB debug rip zebra \fR
-
.SH FILES
-
.TP
.BI /usr/local/sbin/ripd
The default location of the
.B ripd
binary.
-
.TP
.BI /usr/local/etc/ripd.conf
The default location of the
.B ripd
config file.
-
.TP
.BI $(PWD)/ripd.log
If the
.B ripd
process is config'd to output logs to a file, then you will find this
file in the directory where you started \fBripd\fR.
-
-
.SH WARNING
-This man page is intended as a quick reference for command line options, and for config file commands. The definitive document is the Info file \fBzebra\fR.
-
-
+This man page is intended to be a quick reference for command line
+options. The definitive document is the Info file \fBQuagga\fR.
.SH DIAGNOSTICS
-The ripd process may log to standard output, to a VTY, to a log file, or through syslog to the system logs.
-.B ripd
-supports many debugging options, see the Info file, or the source for details.
-
-
+The ripd process may log to standard output, to a VTY, to a log
+file, or through syslog to the system logs. \fBripd\fR supports many
+debugging options, see the Info file, or the source for details.
.SH "SEE ALSO"
-References to other related man pages:
-
-ripngd(8), ospfd(8), ospf6d(8), bgpd(8), zebra(8)
-
-
-
+.BR bgpd (8),
+.BR ripngd (8),
+.BR ospfd (8),
+.BR ospf6d (8),
+.BR isisd (8),
+.BR zebra (8),
+.BR vtysh (1)
.SH BUGS
.B ripd
-eats bugs for breakfast. If you have food for the maintainers try
+eats bugs for breakfast. If you have food for the maintainers try
.BI http://bugzilla.quagga.net
-
-
-.SH AUTHOR[S]
-See <\fBwww.zebra.org\fR>, or the Info file for an accurate list of authors.
+.SH AUTHORS
+See
+.BI http://www.zebra.org
+and
+.BI http://www.quagga.org
+or the Info file for an accurate list of authors.