redhat/zebra.spec - quagga - Gitiles

 # conditionals
 %define 	with_snmp	0
 %define		with_vtysh	1
 %define		with_ospf_te	1
 %define		with_nssa	1
 %define		with_opaque_lsa 1
 %define		with_tcp_zebra	0
 %define		with_vtysh	1
 %define		with_pam	1
 %define		with_ipv6	1
 %define		with_multipath	64

 # path defines
 %define		_sysconfdir	/etc/zebra
 %define		zeb_src		%{_builddir}/%{name}-%{version}
 %define		zeb_rh_src	%{zeb_src}/redhat
 %define		zeb_docs	%{zeb_src}/doc

 Summary: Routing daemon
 Name:		zebra
 Version:	0.93b
 Release:	2003012001
 License:	GPL
 Group: System Environment/Daemons
 Source0:	ftp://ftp.zebra.org/pub/zebra/%{name}-%{version}.tar.gz
 URL:		http://www.zebra.org/
 %if %with_snmp
 BuildRequires:	ucd-snmp-devel
 Prereq:		ucd-snmp
 %endif
 %if %with_vtysh
 BuildRequires:	readline readline-devel ncurses ncurses-devel
 Prereq:		readline ncurses
 %endif
 BuildRequires:	texinfo tetex autoconf openssl-devel pam-devel patch
 # Initscripts > 5.60 is required for IPv6 support
 Prereq:		initscripts >= 5.60
 Prereq:		openssl ncurses readline pam
 Prereq:		/sbin/install-info
 Provides:	routingdaemon
 BuildRoot:	%{_tmppath}/%{name}-%{version}-root
 Obsoletes:	bird gated mrt

 %description
 GNU Zebra is a free software that manages TCP/IP based routing
 protocol. It takes multi-server and multi-thread approach to resolve
 the current complexity of the Internet.

 GNU Zebra supports BGP4, BGP4+, OSPFv2, OSPFv3, RIPv1, RIPv2, and RIPng.

 GNU Zebra is intended to be used as a Route Server and a Route
 Reflector. It is not a toolkit, it provides full routing power under
 a new architecture. GNU Zebra is unique in design in that it has a
 process for each protocol.

 %prep
 %setup  -q

 %build
 %configure \
 	--with-cflags="-O2" \
 	--enable-netlink \
 %if %with_ipv6
 	--enable-ipv6 \
 %endif
 %if %with_snmp
 	--enable-snmp \
 %endif
 %if %with_multipath
 	--enable-multipath=%with_multipath \
 %endif
 %if %with_tcp_zebra
 	--enable-tcp-zebra \
 %endif
 %if %with_nssa
 	--enable-nssa \
 %endif
 %if %with_opaque_lsa
 	--enable-opaque-lsa \
 %endif
 %if %with_ospf_te
 	--enable-ospf-te \
 %endif
 %if %with_vtysh
 	--enable-vtysh \
 %endif
 %if %with_pam
 	--with-libpam
 %endif

 pushd vtysh
 make %{?_smp_mflags} rebuild
 popd

 make %{?_smp_mflags} MAKEINFO="makeinfo --no-split"

 pushd doc
 texi2html zebra.texi
 popd

 %install
 rm -rf $RPM_BUILD_ROOT

 install -d $RPM_BUILD_ROOT/etc/{rc.d/init.d,sysconfig,logrotate.d,pam.d} \
 	$RPM_BUILD_ROOT/var/log/zebra $RPM_BUILD_ROOT%{_infodir}

 make install \
 	DESTDIR=$RPM_BUILD_ROOT

 install %{zeb_rh_src}/zebra.init $RPM_BUILD_ROOT/etc/rc.d/init.d/zebra
 install %{zeb_rh_src}/bgpd.init $RPM_BUILD_ROOT/etc/rc.d/init.d/bgpd
 %if %with_ipv6
 install %{zeb_rh_src}/ospf6d.init $RPM_BUILD_ROOT/etc/rc.d/init.d/ospf6d
 install %{zeb_rh_src}/ripngd.init $RPM_BUILD_ROOT/etc/rc.d/init.d/ripngd
 %endif
 install %{zeb_rh_src}/ospfd.init $RPM_BUILD_ROOT/etc/rc.d/init.d/ospfd
 install %{zeb_rh_src}/ripd.init $RPM_BUILD_ROOT/etc/rc.d/init.d/ripd
 install -m644 %{zeb_rh_src}/zebra.pam $RPM_BUILD_ROOT/etc/pam.d/zebra
 install -m644 %{zeb_rh_src}/zebra.logrotate $RPM_BUILD_ROOT/etc/logrotate.d/zebra

 %post
 # zebra_spec_add_service <service name> <port/proto> <comment>
 # e.g. zebra_spec_add_service zebrasrv 2600/tcp "zebra service"

 zebra_spec_add_service ()
 {
   # Add port /etc/services entry if it isn't already there
   if [ -f /etc/services ] && ! grep -q "^$1[^a-zA-Z0-9]" /etc/services ; then
     echo "$1		$2			# $3"  >> /etc/services
   fi
 }

 zebra_spec_add_service zebrasrv 2600/tcp "zebra service"
 zebra_spec_add_service zebra    2601/tcp "zebra vty"
 zebra_spec_add_service ripd     2602/tcp "RIPd vty"
 %if %with_ipv6
 zebra_spec_add_service ripngd   2603/tcp "RIPngd vty"
 %endif
 zebra_spec_add_service ospfd    2604/tcp "OSPFd vty"
 zebra_spec_add_service bgpd     2605/tcp "BGPd vty"
 %if %with_ipv6
 zebra_spec_add_service ospf6d   2606/tcp "OSPF6d vty"
 %endif

 /sbin/chkconfig --add zebra
 /sbin/chkconfig --add ripd
 %if %with_ipv6
 /sbin/chkconfig --add ripngd
 /sbin/chkconfig --add ospf6d
 %endif
 /sbin/chkconfig --add ospfd
 /sbin/chkconfig --add bgpd

 /sbin/install-info %{_infodir}/zebra.info.gz %{_infodir}/dir

 # Create dummy files if they don't exist so basic functions can be used.
 if [ ! -e %{_sysconfdir}/zebra.conf ]; then
 	echo "hostname `hostname`" > %{_sysconfdir}/zebra.conf
 	chmod 640 %{_sysconfdir}/zebra.conf
 fi
 if [ ! -e %{_sysconfdir}/vtysh.conf ]; then
 	touch %{_sysconfdir}/vtysh.conf
 	chmod 640 %{_sysconfdir}/vtysh.conf
 fi

 %postun
 if [ "$1" -ge  "1" ]; then
 	/etc/rc.d/init.d/zebra  condrestart >/dev/null 2>&1
 	/etc/rc.d/init.d/ripd   condrestart >/dev/null 2>&1
 %if %with_ipv6
 	/etc/rc.d/init.d/ripngd condrestart >/dev/null 2>&1
 %endif
 	/etc/rc.d/init.d/ospfd  condrestart >/dev/null 2>&1
 %if %with_ipv6
 	/etc/rc.d/init.d/ospf6d condrestart >/dev/null 2>&1
 %endif
 	/etc/rc.d/init.d/bgpd   condrestart >/dev/null 2>&1
 fi
 /sbin/install-info --delete %{_infodir}/zebra.info.gz %{_infodir}/dir

 %preun
 if [ "$1" = "0" ]; then
         /sbin/chkconfig --del zebra
 	/sbin/chkconfig --del ripd
 %if %with_ipv6
 	/sbin/chkconfig --del ripngd
 %endif
 	/sbin/chkconfig --del ospfd
 %if %with_ipv6
 	/sbin/chkconfig --del ospf6d
 %endif
 	/sbin/chkconfig --del bgpd
 fi

 %clean
 #rm -rf $RPM_BUILD_ROOT

 %files
 %defattr(-,root,root)
 %doc */*.sample* tools AUTHORS COPYING
 %doc doc/zebra.html
 %doc doc/mpls
 %doc ChangeLog INSTALL NEWS README REPORTING-BUGS SERVICES TODO
 %dir %attr(750,root,root) %{_sysconfdir}
 %dir %attr(750,root,root) /var/log/zebra
 %dir %attr(755,root,root) /usr/share/info
 %{_infodir}/*info*
 %{_mandir}/man*/*
 %{_sbindir}/*
 %if %with_vtysh
 %{_bindir}/*
 %endif
 %config /etc/zebra/*
 %config /etc/rc.d/init.d/*
 %config(noreplace) /etc/pam.d/zebra
 %config(noreplace) %attr(640,root,root) /etc/logrotate.d/*

 %changelog
 * Mon Jan 20 2003 Paul Jakma <paul@dishone.st>
 - update to latest cvs
 - Yon's "show thread cpu" patch - 17217
 - walk up tree - 17218
 - ospfd NSSA fixes - 16681
 - ospfd nsm fixes - 16824
 - ospfd OLSA fixes and new feature - 16823
 - KAME and ifindex fixes - 16525
 - spec file changes to allow redhat files to be in tree

 * Sat Dec 28 2002 Alexander Hoogerhuis <alexh@ihatent.com>
 - Added conditionals for building with(out) IPv6, vtysh, RIP, BGP
 - Fixed up some build requirements (patch)
 - Added conditional build requirements for vtysh / snmp
 - Added conditional to %files for %_bindir depending on vtysh

 * Mon Nov 11 2002 Paul Jakma <paulj@alphyra.ie>
 - update to latest CVS
 - add Greg Troxel's md5 buffer copy/dup fix
 - add RIPv1 fix
 - add Frank's multicast flag fix

 * Wed Oct 09 2002 Paul Jakma <paulj@alphyra.ie>
 - update to latest CVS
 - timestamped crypt_seqnum patch
 - oi->on_write_q fix

 * Mon Sep 30 2002 Paul Jakma <paulj@alphyra.ie>
 - update to latest CVS
 - add vtysh 'write-config (integrated|daemon)' patch
 - always 'make rebuild' in vtysh/ to catch new commands

 * Fri Sep 13 2002 Paul Jakma <paulj@alphyra.ie>
 - update to 0.93b

 * Wed Sep 11 2002 Paul Jakma <paulj@alphyra.ie>
 - update to latest CVS
 - add "/sbin/ip route flush proto zebra" to zebra RH init on startup

 * Sat Aug 24 2002 Paul Jakma <paulj@alphyra.ie>
 - update to current CVS
 - add OSPF point to multipoint patch
 - add OSPF bugfixes
 - add BGP hash optimisation patch

 * Fri Jun 14 2002 Paul Jakma <paulj@alphyra.ie>
 - update to 0.93-pre1 / CVS
 - add link state detection support
 - add generic PtP and RFC3021 support
 - various bug fixes

 * Thu Aug 09 2001 Elliot Lee <sopwith@redhat.com> 0.91a-6
 - Fix bug #51336

 * Wed Aug  1 2001 Trond Eivind Glomsrød <teg@redhat.com> 0.91a-5
 - Use generic initscript strings instead of initscript specific
   ( "Starting foo: " -> "Starting $prog:" )

 * Fri Jul 27 2001 Elliot Lee <sopwith@redhat.com> 0.91a-4
 - Bump the release when rebuilding into the dist.

 * Tue Feb  6 2001 Tim Powers <timp@redhat.com>
 - built for Powertools

 * Sun Feb  4 2001 Pekka Savola <pekkas@netcore.fi>
 - Hacked up from PLD Linux 0.90-1, Mandrake 0.90-1mdk and one from zebra.org.
 - Update to 0.91a
 - Very heavy modifications to init.d/*, .spec, pam, i18n, logrotate, etc.
 - Should be quite Red Hat'isque now.
	# conditionals
	%define with_snmp 0
	%define with_vtysh 1
	%define with_ospf_te 1
	%define with_nssa 1
	%define with_opaque_lsa 1
	%define with_tcp_zebra 0
	%define with_vtysh 1
	%define with_pam 1
	%define with_ipv6 1
	%define with_multipath 64

	# path defines
	%define _sysconfdir /etc/zebra
	%define zeb_src %{_builddir}/%{name}-%{version}
	%define zeb_rh_src %{zeb_src}/redhat
	%define zeb_docs %{zeb_src}/doc

	Summary: Routing daemon
	Name: zebra
	Version: 0.93b
	Release: 2003012001
	License: GPL
	Group: System Environment/Daemons
	Source0: ftp://ftp.zebra.org/pub/zebra/%{name}-%{version}.tar.gz
	URL: http://www.zebra.org/
	%if %with_snmp
	BuildRequires: ucd-snmp-devel
	Prereq: ucd-snmp
	%endif
	%if %with_vtysh
	BuildRequires: readline readline-devel ncurses ncurses-devel
	Prereq: readline ncurses
	%endif
	BuildRequires: texinfo tetex autoconf openssl-devel pam-devel patch
	# Initscripts > 5.60 is required for IPv6 support
	Prereq: initscripts >= 5.60
	Prereq: openssl ncurses readline pam
	Prereq: /sbin/install-info
	Provides: routingdaemon
	BuildRoot: %{_tmppath}/%{name}-%{version}-root
	Obsoletes: bird gated mrt

	%description
	GNU Zebra is a free software that manages TCP/IP based routing
	protocol. It takes multi-server and multi-thread approach to resolve
	the current complexity of the Internet.

	GNU Zebra supports BGP4, BGP4+, OSPFv2, OSPFv3, RIPv1, RIPv2, and RIPng.

	GNU Zebra is intended to be used as a Route Server and a Route
	Reflector. It is not a toolkit, it provides full routing power under
	a new architecture. GNU Zebra is unique in design in that it has a
	process for each protocol.

	%prep
	%setup -q

	%build
	%configure \
	--with-cflags="-O2" \
	--enable-netlink \
	%if %with_ipv6
	--enable-ipv6 \
	%endif
	%if %with_snmp
	--enable-snmp \
	%endif
	%if %with_multipath
	--enable-multipath=%with_multipath \
	%endif
	%if %with_tcp_zebra
	--enable-tcp-zebra \
	%endif
	%if %with_nssa
	--enable-nssa \
	%endif
	%if %with_opaque_lsa
	--enable-opaque-lsa \
	%endif
	%if %with_ospf_te
	--enable-ospf-te \
	%endif
	%if %with_vtysh
	--enable-vtysh \
	%endif
	%if %with_pam
	--with-libpam
	%endif

	pushd vtysh
	make %{?_smp_mflags} rebuild
	popd

	make %{?_smp_mflags} MAKEINFO="makeinfo --no-split"

	pushd doc
	texi2html zebra.texi
	popd

	%install
	rm -rf $RPM_BUILD_ROOT

	install -d $RPM_BUILD_ROOT/etc/{rc.d/init.d,sysconfig,logrotate.d,pam.d} \
	$RPM_BUILD_ROOT/var/log/zebra $RPM_BUILD_ROOT%{_infodir}

	make install \
	DESTDIR=$RPM_BUILD_ROOT

	install %{zeb_rh_src}/zebra.init $RPM_BUILD_ROOT/etc/rc.d/init.d/zebra
	install %{zeb_rh_src}/bgpd.init $RPM_BUILD_ROOT/etc/rc.d/init.d/bgpd
	%if %with_ipv6
	install %{zeb_rh_src}/ospf6d.init $RPM_BUILD_ROOT/etc/rc.d/init.d/ospf6d
	install %{zeb_rh_src}/ripngd.init $RPM_BUILD_ROOT/etc/rc.d/init.d/ripngd
	%endif
	install %{zeb_rh_src}/ospfd.init $RPM_BUILD_ROOT/etc/rc.d/init.d/ospfd
	install %{zeb_rh_src}/ripd.init $RPM_BUILD_ROOT/etc/rc.d/init.d/ripd
	install -m644 %{zeb_rh_src}/zebra.pam $RPM_BUILD_ROOT/etc/pam.d/zebra
	install -m644 %{zeb_rh_src}/zebra.logrotate $RPM_BUILD_ROOT/etc/logrotate.d/zebra

	%post
	# zebra_spec_add_service <service name> <port/proto> <comment>
	# e.g. zebra_spec_add_service zebrasrv 2600/tcp "zebra service"

	zebra_spec_add_service ()
	{
	# Add port /etc/services entry if it isn't already there
	if [ -f /etc/services ] && ! grep -q "^$1[^a-zA-Z0-9]" /etc/services ; then
	echo "$1 $2 # $3" >> /etc/services
	fi
	}

	zebra_spec_add_service zebrasrv 2600/tcp "zebra service"
	zebra_spec_add_service zebra 2601/tcp "zebra vty"
	zebra_spec_add_service ripd 2602/tcp "RIPd vty"
	%if %with_ipv6
	zebra_spec_add_service ripngd 2603/tcp "RIPngd vty"
	%endif
	zebra_spec_add_service ospfd 2604/tcp "OSPFd vty"
	zebra_spec_add_service bgpd 2605/tcp "BGPd vty"
	%if %with_ipv6
	zebra_spec_add_service ospf6d 2606/tcp "OSPF6d vty"
	%endif

	/sbin/chkconfig --add zebra
	/sbin/chkconfig --add ripd
	%if %with_ipv6
	/sbin/chkconfig --add ripngd
	/sbin/chkconfig --add ospf6d
	%endif
	/sbin/chkconfig --add ospfd
	/sbin/chkconfig --add bgpd

	/sbin/install-info %{_infodir}/zebra.info.gz %{_infodir}/dir

	# Create dummy files if they don't exist so basic functions can be used.
	if [ ! -e %{_sysconfdir}/zebra.conf ]; then
	echo "hostname `hostname`" > %{_sysconfdir}/zebra.conf
	chmod 640 %{_sysconfdir}/zebra.conf
	fi
	if [ ! -e %{_sysconfdir}/vtysh.conf ]; then
	touch %{_sysconfdir}/vtysh.conf
	chmod 640 %{_sysconfdir}/vtysh.conf
	fi

	%postun
	if [ "$1" -ge "1" ]; then
	/etc/rc.d/init.d/zebra condrestart >/dev/null 2>&1
	/etc/rc.d/init.d/ripd condrestart >/dev/null 2>&1
	%if %with_ipv6
	/etc/rc.d/init.d/ripngd condrestart >/dev/null 2>&1
	%endif
	/etc/rc.d/init.d/ospfd condrestart >/dev/null 2>&1
	%if %with_ipv6
	/etc/rc.d/init.d/ospf6d condrestart >/dev/null 2>&1
	%endif
	/etc/rc.d/init.d/bgpd condrestart >/dev/null 2>&1
	fi
	/sbin/install-info --delete %{_infodir}/zebra.info.gz %{_infodir}/dir

	%preun
	if [ "$1" = "0" ]; then
	/sbin/chkconfig --del zebra
	/sbin/chkconfig --del ripd
	%if %with_ipv6
	/sbin/chkconfig --del ripngd
	%endif
	/sbin/chkconfig --del ospfd
	%if %with_ipv6
	/sbin/chkconfig --del ospf6d
	%endif
	/sbin/chkconfig --del bgpd
	fi

	%clean
	#rm -rf $RPM_BUILD_ROOT

	%files
	%defattr(-,root,root)
	%doc /.sample* tools AUTHORS COPYING
	%doc doc/zebra.html
	%doc doc/mpls
	%doc ChangeLog INSTALL NEWS README REPORTING-BUGS SERVICES TODO
	%dir %attr(750,root,root) %{_sysconfdir}
	%dir %attr(750,root,root) /var/log/zebra
	%dir %attr(755,root,root) /usr/share/info
	%{_infodir}/info
	%{_mandir}/man/
	%{_sbindir}/*
	%if %with_vtysh
	%{_bindir}/*
	%endif
	%config /etc/zebra/*
	%config /etc/rc.d/init.d/*
	%config(noreplace) /etc/pam.d/zebra
	%config(noreplace) %attr(640,root,root) /etc/logrotate.d/*

	%changelog
	* Mon Jan 20 2003 Paul Jakma <paul@dishone.st>
	- update to latest cvs
	- Yon's "show thread cpu" patch - 17217
	- walk up tree - 17218
	- ospfd NSSA fixes - 16681
	- ospfd nsm fixes - 16824
	- ospfd OLSA fixes and new feature - 16823
	- KAME and ifindex fixes - 16525
	- spec file changes to allow redhat files to be in tree

	* Sat Dec 28 2002 Alexander Hoogerhuis <alexh@ihatent.com>
	- Added conditionals for building with(out) IPv6, vtysh, RIP, BGP
	- Fixed up some build requirements (patch)
	- Added conditional build requirements for vtysh / snmp
	- Added conditional to %files for %_bindir depending on vtysh

	* Mon Nov 11 2002 Paul Jakma <paulj@alphyra.ie>
	- update to latest CVS
	- add Greg Troxel's md5 buffer copy/dup fix
	- add RIPv1 fix
	- add Frank's multicast flag fix

	* Wed Oct 09 2002 Paul Jakma <paulj@alphyra.ie>
	- update to latest CVS
	- timestamped crypt_seqnum patch
	- oi->on_write_q fix

	* Mon Sep 30 2002 Paul Jakma <paulj@alphyra.ie>
	- update to latest CVS
	- add vtysh 'write-config (integrated\|daemon)' patch
	- always 'make rebuild' in vtysh/ to catch new commands

	* Fri Sep 13 2002 Paul Jakma <paulj@alphyra.ie>
	- update to 0.93b

	* Wed Sep 11 2002 Paul Jakma <paulj@alphyra.ie>
	- update to latest CVS
	- add "/sbin/ip route flush proto zebra" to zebra RH init on startup

	* Sat Aug 24 2002 Paul Jakma <paulj@alphyra.ie>
	- update to current CVS
	- add OSPF point to multipoint patch
	- add OSPF bugfixes
	- add BGP hash optimisation patch

	* Fri Jun 14 2002 Paul Jakma <paulj@alphyra.ie>
	- update to 0.93-pre1 / CVS
	- add link state detection support
	- add generic PtP and RFC3021 support
	- various bug fixes

	* Thu Aug 09 2001 Elliot Lee <sopwith@redhat.com> 0.91a-6
	- Fix bug #51336

	* Wed Aug 1 2001 Trond Eivind Glomsrød <teg@redhat.com> 0.91a-5
	- Use generic initscript strings instead of initscript specific
	( "Starting foo: " -> "Starting $prog:" )

	* Fri Jul 27 2001 Elliot Lee <sopwith@redhat.com> 0.91a-4
	- Bump the release when rebuilding into the dist.

	* Tue Feb 6 2001 Tim Powers <timp@redhat.com>
	- built for Powertools

	* Sun Feb 4 2001 Pekka Savola <pekkas@netcore.fi>
	- Hacked up from PLD Linux 0.90-1, Mandrake 0.90-1mdk and one from zebra.org.
	- Update to 0.91a
	- Very heavy modifications to init.d/*, .spec, pam, i18n, logrotate, etc.
	- Should be quite Red Hat'isque now.