ospf6d supports SNMP as well now.
diff --git a/doc/ChangeLog b/doc/ChangeLog
index 07e27b6..736f7f6 100644
--- a/doc/ChangeLog
+++ b/doc/ChangeLog
@@ -1,3 +1,7 @@
+2004-10-12 Hasso Tepper <hasso at quagga.net>
+
+ * snmp.texi: ospf6d supports SNMP as well now.
+
2004-10-11 Hasso Tepper <hasso at quagga.net>
* ospfd.8: Update manpage: add info about new -a/--apiserver command
diff --git a/doc/snmp.texi b/doc/snmp.texi
index 3b6ba8a..b573b6a 100644
--- a/doc/snmp.texi
+++ b/doc/snmp.texi
@@ -95,18 +95,20 @@
the Quagga daemons. Sadly, SNMP has not been implemented in all daemons yet.
@example
(OIDs below .iso.org.dod.internet.private.enterprises)
-zebra .1.3.6.1.4.1.3317.1.2.1 .gnome.gnomeProducts.zebra.zserv
-bgpd .1.3.6.1.4.1.3317.1.2.2 .gnome.gnomeProducts.zebra.bgpd
-ripd .1.3.6.1.4.1.3317.1.2.3 .gnome.gnomeProducts.zebra.ripd
-ospfd .1.3.6.1.4.1.3317.1.2.5 .gnome.gnomeProducts.zebra.ospfd
+zebra .1.3.6.1.4.1.3317.1.2.1 .gnome.gnomeProducts.zebra.zserv
+bgpd .1.3.6.1.4.1.3317.1.2.2 .gnome.gnomeProducts.zebra.bgpd
+ripd .1.3.6.1.4.1.3317.1.2.3 .gnome.gnomeProducts.zebra.ripd
+ospfd .1.3.6.1.4.1.3317.1.2.5 .gnome.gnomeProducts.zebra.ospfd
+ospf6d .1.3.6.1.4.1.3317.1.2.6 .gnome.gnomeProducts.zebra.ospf6d
@end example
The following OID numbers are used for querying the SNMP daemon by a client:
@example
-zebra .1.3.6.1.2.1.4.24 .iso.org.dot.internet.mgmt.mib-2.ip.ipForward
-ospfd .1.3.6.1.2.1.14 .iso.org.dot.internet.mgmt.mib-2.ospf
-bgpd .1.3.6.1.2.1.15 .iso.org.dot.internet.mgmt.mib-2.bgp
-ripd .1.3.6.1.2.1.23 .iso.org.dot.internet.mgmt.mib-2.rip2
+zebra .1.3.6.1.2.1.4.24 .iso.org.dot.internet.mgmt.mib-2.ip.ipForward
+ospfd .1.3.6.1.2.1.14 .iso.org.dot.internet.mgmt.mib-2.ospf
+bgpd .1.3.6.1.2.1.15 .iso.org.dot.internet.mgmt.mib-2.bgp
+ripd .1.3.6.1.2.1.23 .iso.org.dot.internet.mgmt.mib-2.rip2
+ospf6d .1.3.6.1.3.102 .iso.org.dod.internet.experimental.ospfv3
@end example
The following syntax is understood by the Quagga daemons for configuring SNMP: