diff --git a/lib/regex-gnu.h b/lib/regex-gnu.h
new file mode 100644
index 0000000..d88ab92
--- /dev/null
+++ b/lib/regex-gnu.h
@@ -0,0 +1,542 @@
+/* Definitions for data structures and routines for the regular
+   expression library, version 0.12.
+   Copyright (C) 1985,89,90,91,92,93,95,96,97,98 Free Software Foundation, Inc.
+
+   This file is part of the GNU C Library.  Its master source is NOT part of
+   the C library, however.  The master source lives in /gd/gnu/lib.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef _REGEX_H
+#define _REGEX_H 1
+
+/* Allow the use in C++ code.  */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* POSIX says that <sys/types.h> must be included (by the caller) before
+   <regex.h>.  */
+
+#if !defined _POSIX_C_SOURCE && !defined _POSIX_SOURCE && defined VMS
+/* VMS doesn't have `size_t' in <sys/types.h>, even though POSIX says it
+   should be there.  */
+# include <stddef.h>
+#endif
+
+/* The following two types have to be signed and unsigned integer type
+   wide enough to hold a value of a pointer.  For most ANSI compilers
+   ptrdiff_t and size_t should be likely OK.  Still size of these two
+   types is 2 for Microsoft C.  Ugh... */
+typedef long int s_reg_t;
+typedef unsigned long int active_reg_t;
+
+/* The following bits are used to determine the regexp syntax we
+   recognize.  The set/not-set meanings are chosen so that Emacs syntax
+   remains the value 0.  The bits are given in alphabetical order, and
+   the definitions shifted by one from the previous bit; thus, when we
+   add or remove a bit, only one other definition need change.  */
+typedef unsigned long int reg_syntax_t;
+
+/* If this bit is not set, then \ inside a bracket expression is literal.
+   If set, then such a \ quotes the following character.  */
+#define RE_BACKSLASH_ESCAPE_IN_LISTS ((unsigned long int) 1)
+
+/* If this bit is not set, then + and ? are operators, and \+ and \? are
+     literals.
+   If set, then \+ and \? are operators and + and ? are literals.  */
+#define RE_BK_PLUS_QM (RE_BACKSLASH_ESCAPE_IN_LISTS << 1)
+
+/* If this bit is set, then character classes are supported.  They are:
+     [:alpha:], [:upper:], [:lower:],  [:digit:], [:alnum:], [:xdigit:],
+     [:space:], [:print:], [:punct:], [:graph:], and [:cntrl:].
+   If not set, then character classes are not supported.  */
+#define RE_CHAR_CLASSES (RE_BK_PLUS_QM << 1)
+
+/* If this bit is set, then ^ and $ are always anchors (outside bracket
+     expressions, of course).
+   If this bit is not set, then it depends:
+        ^  is an anchor if it is at the beginning of a regular
+           expression or after an open-group or an alternation operator;
+        $  is an anchor if it is at the end of a regular expression, or
+           before a close-group or an alternation operator.
+
+   This bit could be (re)combined with RE_CONTEXT_INDEP_OPS, because
+   POSIX draft 11.2 says that * etc. in leading positions is undefined.
+   We already implemented a previous draft which made those constructs
+   invalid, though, so we haven't changed the code back.  */
+#define RE_CONTEXT_INDEP_ANCHORS (RE_CHAR_CLASSES << 1)
+
+/* If this bit is set, then special characters are always special
+     regardless of where they are in the pattern.
+   If this bit is not set, then special characters are special only in
+     some contexts; otherwise they are ordinary.  Specifically,
+     * + ? and intervals are only special when not after the beginning,
+     open-group, or alternation operator.  */
+#define RE_CONTEXT_INDEP_OPS (RE_CONTEXT_INDEP_ANCHORS << 1)
+
+/* If this bit is set, then *, +, ?, and { cannot be first in an re or
+     immediately after an alternation or begin-group operator.  */
+#define RE_CONTEXT_INVALID_OPS (RE_CONTEXT_INDEP_OPS << 1)
+
+/* If this bit is set, then . matches newline.
+   If not set, then it doesn't.  */
+#define RE_DOT_NEWLINE (RE_CONTEXT_INVALID_OPS << 1)
+
+/* If this bit is set, then . doesn't match NUL.
+   If not set, then it does.  */
+#define RE_DOT_NOT_NULL (RE_DOT_NEWLINE << 1)
+
+/* If this bit is set, nonmatching lists [^...] do not match newline.
+   If not set, they do.  */
+#define RE_HAT_LISTS_NOT_NEWLINE (RE_DOT_NOT_NULL << 1)
+
+/* If this bit is set, either \{...\} or {...} defines an
+     interval, depending on RE_NO_BK_BRACES.
+   If not set, \{, \}, {, and } are literals.  */
+#define RE_INTERVALS (RE_HAT_LISTS_NOT_NEWLINE << 1)
+
+/* If this bit is set, +, ? and | aren't recognized as operators.
+   If not set, they are.  */
+#define RE_LIMITED_OPS (RE_INTERVALS << 1)
+
+/* If this bit is set, newline is an alternation operator.
+   If not set, newline is literal.  */
+#define RE_NEWLINE_ALT (RE_LIMITED_OPS << 1)
+
+/* If this bit is set, then `{...}' defines an interval, and \{ and \}
+     are literals.
+  If not set, then `\{...\}' defines an interval.  */
+#define RE_NO_BK_BRACES (RE_NEWLINE_ALT << 1)
+
+/* If this bit is set, (...) defines a group, and \( and \) are literals.
+   If not set, \(...\) defines a group, and ( and ) are literals.  */
+#define RE_NO_BK_PARENS (RE_NO_BK_BRACES << 1)
+
+/* If this bit is set, then \<digit> matches <digit>.
+   If not set, then \<digit> is a back-reference.  */
+#define RE_NO_BK_REFS (RE_NO_BK_PARENS << 1)
+
+/* If this bit is set, then | is an alternation operator, and \| is literal.
+   If not set, then \| is an alternation operator, and | is literal.  */
+#define RE_NO_BK_VBAR (RE_NO_BK_REFS << 1)
+
+/* If this bit is set, then an ending range point collating higher
+     than the starting range point, as in [z-a], is invalid.
+   If not set, then when ending range point collates higher than the
+     starting range point, the range is ignored.  */
+#define RE_NO_EMPTY_RANGES (RE_NO_BK_VBAR << 1)
+
+/* If this bit is set, then an unmatched ) is ordinary.
+   If not set, then an unmatched ) is invalid.  */
+#define RE_UNMATCHED_RIGHT_PAREN_ORD (RE_NO_EMPTY_RANGES << 1)
+
+/* If this bit is set, succeed as soon as we match the whole pattern,
+   without further backtracking.  */
+#define RE_NO_POSIX_BACKTRACKING (RE_UNMATCHED_RIGHT_PAREN_ORD << 1)
+
+/* If this bit is set, do not process the GNU regex operators.
+   If not set, then the GNU regex operators are recognized. */
+#define RE_NO_GNU_OPS (RE_NO_POSIX_BACKTRACKING << 1)
+
+/* If this bit is set, turn on internal regex debugging.
+   If not set, and debugging was on, turn it off.
+   This only works if regex.c is compiled -DDEBUG.
+   We define this bit always, so that all that's needed to turn on
+   debugging is to recompile regex.c; the calling code can always have
+   this bit set, and it won't affect anything in the normal case. */
+#define RE_DEBUG (RE_NO_GNU_OPS << 1)
+
+/* This global variable defines the particular regexp syntax to use (for
+   some interfaces).  When a regexp is compiled, the syntax used is
+   stored in the pattern buffer, so changing this does not affect
+   already-compiled regexps.  */
+extern reg_syntax_t re_syntax_options;
+
+/* Define combinations of the above bits for the standard possibilities.
+   (The [[[ comments delimit what gets put into the Texinfo file, so
+   don't delete them!)  */
+/* [[[begin syntaxes]]] */
+#define RE_SYNTAX_EMACS 0
+
+#define RE_SYNTAX_AWK							\
+  (RE_BACKSLASH_ESCAPE_IN_LISTS   | RE_DOT_NOT_NULL			\
+   | RE_NO_BK_PARENS              | RE_NO_BK_REFS			\
+   | RE_NO_BK_VBAR                | RE_NO_EMPTY_RANGES			\
+   | RE_DOT_NEWLINE		  | RE_CONTEXT_INDEP_ANCHORS		\
+   | RE_UNMATCHED_RIGHT_PAREN_ORD | RE_NO_GNU_OPS)
+
+#define RE_SYNTAX_GNU_AWK						\
+  ((RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS | RE_DEBUG)	\
+   & ~(RE_DOT_NOT_NULL | RE_INTERVALS | RE_CONTEXT_INDEP_OPS))
+
+#define RE_SYNTAX_POSIX_AWK 						\
+  (RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS		\
+   | RE_INTERVALS	    | RE_NO_GNU_OPS)
+
+#define RE_SYNTAX_GREP							\
+  (RE_BK_PLUS_QM              | RE_CHAR_CLASSES				\
+   | RE_HAT_LISTS_NOT_NEWLINE | RE_INTERVALS				\
+   | RE_NEWLINE_ALT)
+
+#define RE_SYNTAX_EGREP							\
+  (RE_CHAR_CLASSES        | RE_CONTEXT_INDEP_ANCHORS			\
+   | RE_CONTEXT_INDEP_OPS | RE_HAT_LISTS_NOT_NEWLINE			\
+   | RE_NEWLINE_ALT       | RE_NO_BK_PARENS				\
+   | RE_NO_BK_VBAR)
+
+#define RE_SYNTAX_POSIX_EGREP						\
+  (RE_SYNTAX_EGREP | RE_INTERVALS | RE_NO_BK_BRACES)
+
+/* P1003.2/D11.2, section 4.20.7.1, lines 5078ff.  */
+#define RE_SYNTAX_ED RE_SYNTAX_POSIX_BASIC
+
+#define RE_SYNTAX_SED RE_SYNTAX_POSIX_BASIC
+
+/* Syntax bits common to both basic and extended POSIX regex syntax.  */
+#define _RE_SYNTAX_POSIX_COMMON						\
+  (RE_CHAR_CLASSES | RE_DOT_NEWLINE      | RE_DOT_NOT_NULL		\
+   | RE_INTERVALS  | RE_NO_EMPTY_RANGES)
+
+#define RE_SYNTAX_POSIX_BASIC						\
+  (_RE_SYNTAX_POSIX_COMMON | RE_BK_PLUS_QM)
+
+/* Differs from ..._POSIX_BASIC only in that RE_BK_PLUS_QM becomes
+   RE_LIMITED_OPS, i.e., \? \+ \| are not recognized.  Actually, this
+   isn't minimal, since other operators, such as \`, aren't disabled.  */
+#define RE_SYNTAX_POSIX_MINIMAL_BASIC					\
+  (_RE_SYNTAX_POSIX_COMMON | RE_LIMITED_OPS)
+
+#define RE_SYNTAX_POSIX_EXTENDED					\
+  (_RE_SYNTAX_POSIX_COMMON | RE_CONTEXT_INDEP_ANCHORS			\
+   | RE_CONTEXT_INDEP_OPS  | RE_NO_BK_BRACES				\
+   | RE_NO_BK_PARENS       | RE_NO_BK_VBAR				\
+   | RE_UNMATCHED_RIGHT_PAREN_ORD)
+
+/* Differs from ..._POSIX_EXTENDED in that RE_CONTEXT_INVALID_OPS
+   replaces RE_CONTEXT_INDEP_OPS and RE_NO_BK_REFS is added.  */
+#define RE_SYNTAX_POSIX_MINIMAL_EXTENDED				\
+  (_RE_SYNTAX_POSIX_COMMON  | RE_CONTEXT_INDEP_ANCHORS			\
+   | RE_CONTEXT_INVALID_OPS | RE_NO_BK_BRACES				\
+   | RE_NO_BK_PARENS        | RE_NO_BK_REFS				\
+   | RE_NO_BK_VBAR	    | RE_UNMATCHED_RIGHT_PAREN_ORD)
+/* [[[end syntaxes]]] */
+
+/* Maximum number of duplicates an interval can allow.  Some systems
+   (erroneously) define this in other header files, but we want our
+   value, so remove any previous define.  */
+#ifdef RE_DUP_MAX
+# undef RE_DUP_MAX
+#endif
+/* If sizeof(int) == 2, then ((1 << 15) - 1) overflows.  */
+#define RE_DUP_MAX (0x7fff)
+
+
+/* POSIX `cflags' bits (i.e., information for `regcomp').  */
+
+/* If this bit is set, then use extended regular expression syntax.
+   If not set, then use basic regular expression syntax.  */
+#define REG_EXTENDED 1
+
+/* If this bit is set, then ignore case when matching.
+   If not set, then case is significant.  */
+#define REG_ICASE (REG_EXTENDED << 1)
+
+/* If this bit is set, then anchors do not match at newline
+     characters in the string.
+   If not set, then anchors do match at newlines.  */
+#define REG_NEWLINE (REG_ICASE << 1)
+
+/* If this bit is set, then report only success or fail in regexec.
+   If not set, then returns differ between not matching and errors.  */
+#define REG_NOSUB (REG_NEWLINE << 1)
+
+
+/* POSIX `eflags' bits (i.e., information for regexec).  */
+
+/* If this bit is set, then the beginning-of-line operator doesn't match
+     the beginning of the string (presumably because it's not the
+     beginning of a line).
+   If not set, then the beginning-of-line operator does match the
+     beginning of the string.  */
+#define REG_NOTBOL 1
+
+/* Like REG_NOTBOL, except for the end-of-line.  */
+#define REG_NOTEOL (1 << 1)
+
+
+/* If any error codes are removed, changed, or added, update the
+   `re_error_msg' table in regex.c.  */
+typedef enum
+{
+#ifdef _XOPEN_SOURCE
+  REG_ENOSYS = -1,	/* This will never happen for this implementation.  */
+#endif
+
+  REG_NOERROR = 0,	/* Success.  */
+  REG_NOMATCH,		/* Didn't find a match (for regexec).  */
+
+  /* POSIX regcomp return error codes.  (In the order listed in the
+     standard.)  */
+  REG_BADPAT,		/* Invalid pattern.  */
+  REG_ECOLLATE,		/* Not implemented.  */
+  REG_ECTYPE,		/* Invalid character class name.  */
+  REG_EESCAPE,		/* Trailing backslash.  */
+  REG_ESUBREG,		/* Invalid back reference.  */
+  REG_EBRACK,		/* Unmatched left bracket.  */
+  REG_EPAREN,		/* Parenthesis imbalance.  */
+  REG_EBRACE,		/* Unmatched \{.  */
+  REG_BADBR,		/* Invalid contents of \{\}.  */
+  REG_ERANGE,		/* Invalid range end.  */
+  REG_ESPACE,		/* Ran out of memory.  */
+  REG_BADRPT,		/* No preceding re for repetition op.  */
+
+  /* Error codes we've added.  */
+  REG_EEND,		/* Premature end.  */
+  REG_ESIZE,		/* Compiled pattern bigger than 2^16 bytes.  */
+  REG_ERPAREN		/* Unmatched ) or \); not returned from regcomp.  */
+} reg_errcode_t;
+
+/* This data structure represents a compiled pattern.  Before calling
+   the pattern compiler, the fields `buffer', `allocated', `fastmap',
+   `translate', and `no_sub' can be set.  After the pattern has been
+   compiled, the `re_nsub' field is available.  All other fields are
+   private to the regex routines.  */
+
+#ifndef RE_TRANSLATE_TYPE
+# define RE_TRANSLATE_TYPE char *
+#endif
+
+struct re_pattern_buffer
+{
+/* [[[begin pattern_buffer]]] */
+	/* Space that holds the compiled pattern.  It is declared as
+          `unsigned char *' because its elements are
+           sometimes used as array indexes.  */
+  unsigned char *buffer;
+
+	/* Number of bytes to which `buffer' points.  */
+  unsigned long int allocated;
+
+	/* Number of bytes actually used in `buffer'.  */
+  unsigned long int used;
+
+        /* Syntax setting with which the pattern was compiled.  */
+  reg_syntax_t syntax;
+
+        /* Pointer to a fastmap, if any, otherwise zero.  re_search uses
+           the fastmap, if there is one, to skip over impossible
+           starting points for matches.  */
+  char *fastmap;
+
+        /* Either a translate table to apply to all characters before
+           comparing them, or zero for no translation.  The translation
+           is applied to a pattern when it is compiled and to a string
+           when it is matched.  */
+  RE_TRANSLATE_TYPE translate;
+
+	/* Number of subexpressions found by the compiler.  */
+  size_t re_nsub;
+
+        /* Zero if this pattern cannot match the empty string, one else.
+           Well, in truth it's used only in `re_search_2', to see
+           whether or not we should use the fastmap, so we don't set
+           this absolutely perfectly; see `re_compile_fastmap' (the
+           `duplicate' case).  */
+  unsigned can_be_null : 1;
+
+        /* If REGS_UNALLOCATED, allocate space in the `regs' structure
+             for `max (RE_NREGS, re_nsub + 1)' groups.
+           If REGS_REALLOCATE, reallocate space if necessary.
+           If REGS_FIXED, use what's there.  */
+#define REGS_UNALLOCATED 0
+#define REGS_REALLOCATE 1
+#define REGS_FIXED 2
+  unsigned regs_allocated : 2;
+
+        /* Set to zero when `regex_compile' compiles a pattern; set to one
+           by `re_compile_fastmap' if it updates the fastmap.  */
+  unsigned fastmap_accurate : 1;
+
+        /* If set, `re_match_2' does not return information about
+           subexpressions.  */
+  unsigned no_sub : 1;
+
+        /* If set, a beginning-of-line anchor doesn't match at the
+           beginning of the string.  */
+  unsigned not_bol : 1;
+
+        /* Similarly for an end-of-line anchor.  */
+  unsigned not_eol : 1;
+
+        /* If true, an anchor at a newline matches.  */
+  unsigned newline_anchor : 1;
+
+/* [[[end pattern_buffer]]] */
+};
+
+typedef struct re_pattern_buffer regex_t;
+
+/* Type for byte offsets within the string.  POSIX mandates this.  */
+typedef int regoff_t;
+
+
+/* This is the structure we store register match data in.  See
+   regex.texinfo for a full description of what registers match.  */
+struct re_registers
+{
+  unsigned num_regs;
+  regoff_t *start;
+  regoff_t *end;
+};
+
+
+/* If `regs_allocated' is REGS_UNALLOCATED in the pattern buffer,
+   `re_match_2' returns information about at least this many registers
+   the first time a `regs' structure is passed.  */
+#ifndef RE_NREGS
+# define RE_NREGS 30
+#endif
+
+
+/* POSIX specification for registers.  Aside from the different names than
+   `re_registers', POSIX uses an array of structures, instead of a
+   structure of arrays.  */
+typedef struct
+{
+  regoff_t rm_so;  /* Byte offset from string's start to substring's start.  */
+  regoff_t rm_eo;  /* Byte offset from string's start to substring's end.  */
+} regmatch_t;
+
+/* Declarations for routines.  */
+
+/* To avoid duplicating every routine declaration -- once with a
+   prototype (if we are ANSI), and once without (if we aren't) -- we
+   use the following macro to declare argument types.  This
+   unfortunately clutters up the declarations a bit, but I think it's
+   worth it.  */
+
+#if __STDC__
+
+# define _RE_ARGS(args) args
+
+#else /* not __STDC__ */
+
+# define _RE_ARGS(args) ()
+
+#endif /* not __STDC__ */
+
+/* Sets the current default syntax to SYNTAX, and return the old syntax.
+   You can also simply assign to the `re_syntax_options' variable.  */
+extern reg_syntax_t re_set_syntax _RE_ARGS ((reg_syntax_t syntax));
+
+/* Compile the regular expression PATTERN, with length LENGTH
+   and syntax given by the global `re_syntax_options', into the buffer
+   BUFFER.  Return NULL if successful, and an error string if not.  */
+extern const char *re_compile_pattern
+  _RE_ARGS ((const char *pattern, size_t length,
+             struct re_pattern_buffer *buffer));
+
+
+/* Compile a fastmap for the compiled pattern in BUFFER; used to
+   accelerate searches.  Return 0 if successful and -2 if was an
+   internal error.  */
+extern int re_compile_fastmap _RE_ARGS ((struct re_pattern_buffer *buffer));
+
+
+/* Search in the string STRING (with length LENGTH) for the pattern
+   compiled into BUFFER.  Start searching at position START, for RANGE
+   characters.  Return the starting position of the match, -1 for no
+   match, or -2 for an internal error.  Also return register
+   information in REGS (if REGS and BUFFER->no_sub are nonzero).  */
+extern int re_search
+  _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string,
+            int length, int start, int range, struct re_registers *regs));
+
+
+/* Like `re_search', but search in the concatenation of STRING1 and
+   STRING2.  Also, stop searching at index START + STOP.  */
+extern int re_search_2
+  _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string1,
+             int length1, const char *string2, int length2,
+             int start, int range, struct re_registers *regs, int stop));
+
+
+/* Like `re_search', but return how many characters in STRING the regexp
+   in BUFFER matched, starting at position START.  */
+extern int re_match
+  _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string,
+             int length, int start, struct re_registers *regs));
+
+
+/* Relates to `re_match' as `re_search_2' relates to `re_search'.  */
+extern int re_match_2
+  _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string1,
+             int length1, const char *string2, int length2,
+             int start, struct re_registers *regs, int stop));
+
+
+/* Set REGS to hold NUM_REGS registers, storing them in STARTS and
+   ENDS.  Subsequent matches using BUFFER and REGS will use this memory
+   for recording register information.  STARTS and ENDS must be
+   allocated with malloc, and must each be at least `NUM_REGS * sizeof
+   (regoff_t)' bytes long.
+
+   If NUM_REGS == 0, then subsequent matches should allocate their own
+   register data.
+
+   Unless this function is called, the first search or match using
+   PATTERN_BUFFER will allocate its own register data, without
+   freeing the old data.  */
+extern void re_set_registers
+  _RE_ARGS ((struct re_pattern_buffer *buffer, struct re_registers *regs,
+             unsigned num_regs, regoff_t *starts, regoff_t *ends));
+
+#if defined _REGEX_RE_COMP || defined _LIBC
+# ifndef _CRAY
+/* 4.2 bsd compatibility.  */
+extern char *re_comp _RE_ARGS ((const char *));
+extern int re_exec _RE_ARGS ((const char *));
+# endif
+#endif
+
+/* POSIX compatibility.  */
+extern int regcomp _RE_ARGS ((regex_t *__preg, const char *__pattern,
+			      int __cflags));
+
+extern int regexec _RE_ARGS ((const regex_t *__preg,
+			      const char *__string, size_t __nmatch,
+			      regmatch_t __pmatch[], int __eflags));
+
+extern size_t regerror _RE_ARGS ((int __errcode, const regex_t *__preg,
+				  char *__errbuf, size_t __errbuf_size));
+
+extern void regfree _RE_ARGS ((regex_t *__preg));
+
+
+#ifdef __cplusplus
+}
+#endif	/* C++ */
+
+#endif /* regex.h */
+
+/*
+Local variables:
+make-backup-files: t
+version-control: t
+trim-versions-without-asking: nil
+End:
+*/