diff --git a/ports/Makefile b/ports/Makefile
new file mode 100644
index 0000000..d085d06
--- /dev/null
+++ b/ports/Makefile
@@ -0,0 +1,58 @@
+# New ports collection makefile for:	zebra
+# Version required:	2.1.5
+# Date created:		28 Feb 1998
+# Whom:			seirios@matrix.iri.co.jp
+#
+
+#DISTNAME=	zebra-980224
+DISTNAME=	zebra-current
+PKGNAME=	zebra
+CATEGORIES=	net
+MASTER_SITES=	ftp://ftp.zebra.org/pub/zebra/
+
+MAINTAINER=	seirios@matrix.iri.co.jp
+
+WRKSRC=		${WRKDIR}/zebra-current
+
+#### Under constructing, We cannot support md5
+NO_CHECKSUM=	yes
+
+do-build:
+	@(cd ${WRKSRC}; sh ./configure; make)
+
+post-install:
+	@if [ ! -f ${PREFIX}/etc/rc.d/zebra.sh ]; then \
+		echo "Installing ${PREFIX}/etc/rc.d/zebra.sh startup file."; \
+		echo "#!/bin/sh" > ${PREFIX}/etc/rc.d/zebra.sh; \
+		echo "# zebra" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+		echo "if [ -x /usr/local/sbin/zebra -a ! -f /var/run/zebra.pid -a -f /usr/local/etc/zebra.conf ]; then" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+		echo "	/usr/local/sbin/zebra -d -f /usr/local/etc/zebra.conf" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+		echo "	echo -n ' zebra'" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+		echo "fi" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+		echo "# bgpd" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+		echo "if [ -x /usr/local/sbin/bgpd -a ! -f /var/run/bgpd.pid -a -f /usr/local/etc/bgpd.conf ]; then" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+		echo "	/usr/local/sbin/bgpd -d -f /usr/local/etc/bgpd.conf" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+		echo "	echo -n ' bgpd'" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+		echo "fi" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+		echo "# ripd" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+		echo "if [ -x /usr/local/sbin/ripd -a ! -f /var/run/ripd.pid -a -f /usr/local/etc/ripd.conf ]; then" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+		echo "	/usr/local/sbin/ripd -d -f /usr/local/etc/ripd.conf" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+		echo "	echo -n ' ripd'" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+		echo "fi" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+		echo "# ripngd" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+		echo "if [ -x /usr/local/sbin/ripngd -a ! -f /var/run/ripd.pid -a -f /usr/local/etc/ripd.conf ]; then" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+		echo "	/usr/local/sbin/ripngd -d -f /usr/local/etc/ripd.conf" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+		echo "	echo -n ' ripngd'" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+		echo "fi" >> ${PREFIX}/etc/rc.d/zebra.sh; \
+		chmod 751 ${PREFIX}/etc/rc.d/zebra.sh; \
+	fi
+	@echo "If you will access zebra,bgpd,ripd,ripngd with telnet,";
+	@echo "then you add some line (written under this line) to /etc/services";
+	@echo "	zebrasrv      2600/tcp		  # zebra service";
+	@echo "	zebra	      2601/tcp		  # zebra vty";
+	@echo "	ripd	      2602/tcp		  # RIPd vty";
+	@echo "	ripngd	      2603/tcp		  # RIPngd vty";
+	@echo "	ospfd	      2604/tcp		  # OSPFd vty";
+	@echo "	bgpd	      2605/tcp		  # BGPd vty";
+
+.include <bsd.port.mk>
diff --git a/ports/README b/ports/README
new file mode 100644
index 0000000..a650eaa
--- /dev/null
+++ b/ports/README
@@ -0,0 +1 @@
+This directory contain files for making FreeBSD package.
diff --git a/ports/files/md5 b/ports/files/md5
new file mode 100644
index 0000000..520c348
--- /dev/null
+++ b/ports/files/md5
@@ -0,0 +1 @@
+MD5 (zebra-980224.tar.gz) = c6887645741200c43341156c168c7034
diff --git a/ports/pkg/COMMENT b/ports/pkg/COMMENT
new file mode 100644
index 0000000..53c55e3
--- /dev/null
+++ b/ports/pkg/COMMENT
@@ -0,0 +1 @@
+Zebra Routing protocol daemon
diff --git a/ports/pkg/DESCR b/ports/pkg/DESCR
new file mode 100644
index 0000000..0c8d01b
--- /dev/null
+++ b/ports/pkg/DESCR
@@ -0,0 +1,75 @@
+=============
+WHAT IS ZEBRA
+=============
+  Zebra is a free software that manages TCP/IP based routing protocol.
+  It takes multi-server and multi-thread approach to resolve the current
+complexity of the Internet.
+
+  Currently zebra is still under development, so If you want to use zebra,
+I strongly recommend you to get the latest version of zebra.
+  Zebra snapshot is released on every monday.
+
+===================
+SUPPORTED Protocols
+===================
+  Zebra supports both IPv4 and IPv6 :-)
+  For supporting IPv4 Routing protocols is here
+	RIP (both version1 and version2)
+		RIPv2 supports both Multicast and Broadcast
+	BGP (only support BGP4)
+
+  For supporting IPv6 Routing protocols is here
+	RIPng
+	BGP4+
+
+===================
+Supported plat-home
+===================
+  Now zebra is testing on 
+  o FreeBSD 2.2.8
+      -- without IPv6 ;-)
+      -- with KAME
+      -- with INRIA IPv6 protocol stack.
+
+  o GNU/Linux 2.2.2
+  o GNU/Linux 2.0.36
+
+===========
+ZEBRA Ports
+===========
+  Each daemon has each own terminal interface.  Also zebra has communication
+port which provides several services to other daemons.  Below is zebra ports
+list.
+
+zebrasrv      2600/tcp		  # zebra service
+zebra	      2601/tcp		  # zebra vty
+ripd	      2602/tcp		  # RIPd vty
+ripngd	      2603/tcp		  # RIPngd vty
+ospfd	      2604/tcp		  # OSPFd vty
+bgpd	      2605/tcp		  # BGPd vty
+
+I recommend you to add upper list to /etc/services.
+
+====================
+For More Information
+====================
+  Web page is located at:
+	http://www.zebra.org/
+
+  Alpha version source file can be found at:
+	ftp://ftp.zebra.org/pub/zebra/
+
+  Mailing List is here
+	zebra@zebra.org
+	zebra-jp@zebra.org
+
+    If you want to join zebra mailing list, mail to 
+	majordomo@zebra.org
+    and you write
+	subscribe zebra
+	  -- if you want to talk with English
+	subscribe zebra-jp
+	  -- if you want to talk with Japanese
+    on Mail BODY (Not Subject).
+
+Enjoy.
diff --git a/ports/pkg/PLIST b/ports/pkg/PLIST
new file mode 100644
index 0000000..ccc69eb
--- /dev/null
+++ b/ports/pkg/PLIST
@@ -0,0 +1,8 @@
+sbin/zebra
+sbin/bgpd
+sbin/ripd
+etc/bgpd.conf.sample
+etc/ripd.conf.sample
+etc/zebra.conf.sample
+etc/rc.d/zebra.sh
+info/zebra.info