babeld: Replace the babeld.conf.sample file by one that actually works.
diff --git a/babeld/babeld.conf.sample b/babeld/babeld.conf.sample
index bb2c1db..e1585c1 100644
--- a/babeld/babeld.conf.sample
+++ b/babeld/babeld.conf.sample
@@ -1,31 +1,13 @@
-# placeholder
-# This is an example. See documentation for more results.
-#
-# let 'eth0' be an interface.
-#
-# Remark: '#' and '!' are comments.
-# NB, just for this example:
-# each line at the same indentation is only dependant of the less level
-# line. BUT the quagga parser is insensitive.
+router babel
+! network eth0
+! redistribute kernel
+! no redistribute static
+!interface eth0
+! wired
+! wireless
+! babel split-horizon
+! no babel split-horizon
-# setup the routing for Babel.
-router babel #activate the Babel routing babeld.c
- network eth0 #eth0 is match interface.c
- redistribute kernel #(kernel|connected|static|ospf6|bgp) babel_zebra.c
- no redistribute static #...
-
-
-# setup each interface, one by one...
-Interface eth0 #Set eth0 options interface.c
-! wired #with wire interface.c
- wireless #without wire (défaut) interface.c
-! babel split-horizon #with Split-horizon interface.c
- no babel split-horizon #without (defaut) interface.c
- hello interval 4096 #default = 4096 (in miliseconds) interface.c
-
-
-# setup the log destination.
-# log stdout
-# log stdout debugging
-log file /var/log/quagga/babeld.log
\ No newline at end of file
+! log file /var/log/quagga/babeld.log
+log stdout
\ No newline at end of file