[pim] Initial pim 0.155
diff --git a/pimd/DEBUG b/pimd/DEBUG
new file mode 100644
index 0000000..aeed9da
--- /dev/null
+++ b/pimd/DEBUG
@@ -0,0 +1,49 @@
+# $QuaggaId: $Format:%an, %ai, %h$ $
+
+DEBUG HINTS
+
+ - Check the source is issuing multicast packets with TTL high enough
+ to reach the recipients.
+
+ - Check the multicast packets are not being dropped due to
+ fragmentation problems.
+
+ - The following command generates a 100-kbps multicast stream for
+ channel 1.1.1.1,239.1.1.1 with TTL 10 and 1000-byte payload per UDP
+ packet (to avoid fragmentation):
+
+ nepim -b 1.1.1.1 -c 239.1.1.1 -T 10 -W 1000 -r 100k -a 1d
+
+ - Remotely you can receive that stream by running:
+
+ nepim -j 1.1.1.1+239.1.1.1@eth0
+ (Remember of enabling both "ip pim ssm" and "ip igmp" under eth0.)
+
+
+SAMPLE DEBUG COMMANDS
+
+ conf t
+ int eth0
+ ip pim ssm
+
+ test pim receive hello eth0 192.168.0.2 600 10 111 1000 3000 0
+ test pim receive join eth0 600 192.168.0.1 192.168.0.2 239.1.1.1 1.1.1.1
+
+ show ip pim join
+
+
+INTEROPERABILITY WITH CISCO
+
+ ! Cisco IP Multicast command reference:
+ ! ftp://ftpeng.cisco.com/ipmulticast/Multicast-Commands
+ !
+ ip pim ssm default ! enable SSM mode for groups 232.0.0.0/8
+ ip multicast-routing
+ ip pim state-refresh disable
+ no ip pim dm-fallback
+ !
+ interface FastEthernet0
+ ip pim sparse-mode
+ ip igmp version 3
+
+-x-