[pim] Initial pim 0.155
diff --git a/pimd/README b/pimd/README
new file mode 100644
index 0000000..e42ceda
--- /dev/null
+++ b/pimd/README
@@ -0,0 +1,157 @@
+#
+# $QuaggaId: $Format:%an, %ai, %h$ $
+#
+
+INTRODUCTION
+
+ qpimd aims to implement a PIM (Protocol Independent Multicast)
+ daemon for the Quagga Routing Suite.
+
+ Initially qpimd targets only PIM SSM (Source-Specific
+ Multicast) mode as defined in section 4.8.2 (PIM-SSM-Only
+ Routers) of RFC 4601.
+
+ In order to deliver end-to-end multicast routing control
+ plane, qpimd includes the router-side of IGMPv3 (RFC 3376).
+
+LICENSE
+
+ qpimd - pimd for quagga
+ Copyright (C) 2008 Everton da Silva Marques
+
+ qpimd is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as
+ published by the Free Software Foundation; either version 2,
+ or (at your option) any later version.
+
+ qpimd is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public
+ License along with qpimd; see the file COPYING. If not, write
+ to the Free Software Foundation, Inc., 59 Temple Place - Suite
+ 330, Boston, MA 02111-1307, USA.
+
+HOME SITE
+
+ qpimd lives at:
+
+ http://savannah.nongnu.org/projects/qpimd
+
+PLATFORMS
+
+ qpimd has been tested with Debian Lenny under Linux 2.6.
+
+REQUIREMENTS
+
+ qpimd requires Quagga (0.99.11 or higher from http://www.quagga.net)
+
+ The GNU Build System (Autotools) is required to build from
+ source code repository.
+
+ gawk is also needed to build with Autotools. Any other awk
+ usually won't work.
+
+BUILDING FROM QUAGGA GIT REPOSITORY
+
+ 1) Get the latest quagga source tree
+
+ # git clone git://code.quagga.net/quagga.git quagga
+
+ 2) Apply qpimd patch into quagga source tree
+
+ # patch -p1 -d quagga < pimd-0.153-quagga-git20090623.patch
+
+ 3) Compile and install quagga
+
+ # cd quagga
+ # ./bootstrap.sh
+ # ./configure --prefix=/usr/local/quagga --enable-pimd
+ # make
+ # make install
+
+BUILDING FROM QUAGGA TARBALL
+
+ 1) Get the latest quagga tarball
+
+ # wget http://www.quagga.net/download/quagga-0.99.13.tar.gz
+
+ 2) Unpack the quagga tarball
+
+ # tar xzf quagga-0.99.13.tar.gz
+
+ 3) Apply qpimd patch into quagga source tree
+
+ # patch -p1 -d quagga-0.99.13 < pimd-0.153-quagga-0.99.13.patch
+
+ 4) Compile and install quagga
+
+ # cd quagga-0.99.13
+ # ./configure --prefix=/usr/local/quagga --enable-pimd
+ # make
+ # make install
+
+USAGE
+
+ 1) Configure and start the zebra daemon
+
+ # cp /usr/local/quagga/etc/zebra.conf.sample /usr/local/quagga/etc/zebra.conf
+ # vi /usr/local/quagga/etc/zebra.conf
+ # /usr/local/quagga/sbin/zebra
+
+ 2) Configure and start the pimd daemon
+
+ # cp /usr/local/quagga/etc/pimd.conf.sample /usr/local/quagga/etc/pimd.conf
+ # vi /usr/local/quagga/etc/pimd.conf
+ # /usr/local/quagga/sbin/pimd
+
+ 3) Access pimd vty interface at port TCP 2611
+
+ # telnet localhost 2611
+
+CONFIGURATION COMMANDS
+
+ See available commands in the file pimd/COMMANDS.
+
+KNOWN CAVEATS
+
+ See list of known caveats in the file pimd/CAVEATS.
+
+SUPPORT
+
+ Please post comments, questions, patches, bug reports at the
+ support site:
+
+ http://savannah.nongnu.org/projects/qpimd
+
+RELATED WORK
+
+ igmprt: An IGMPv3-router implementation
+ - http://www.loria.fr/~lahmadi/igmpv3-router.html
+
+ pimd: PIMv2-SM daemon
+ - http://netweb.usc.edu/pim/pimd (URL broken in 2008-12-23)
+ - http://packages.debian.org/source/sid/pimd (from Debian)
+
+ zpimd: zpimd is not dependent of zebra or any other routing daemon
+ - ftp://robur.slu.se/pub/Routing/Zebra
+ - http://sunsite2.icm.edu.pl/pub/unix/routing/zpimd
+
+ mrd6: an IPv6 Multicast Router for Linux systems
+ - http://fivebits.net/proj/mrd6/
+
+ MBGP: Implementation of RFC 2858 for Quagga
+ - git://git.coplanar.net/~balajig/quagga
+ - http://www.gossamer-threads.com/lists/quagga/dev/18000
+
+REFERENCES
+
+ IANA Protocol Independent Multicast (PIM) Parameters
+ http://www.iana.org/assignments/pim-parameters/pim-parameters.txt
+
+ Address Family Numbers
+ http://www.iana.org/assignments/address-family-numbers
+
+ -- END --