paul | 718e374 | 2002-12-13 20:15:29 +0000 | [diff] [blame] | 1 | /* RIPng daemon |
| 2 | * Copyright (C) 1998, 1999 Kunihiro Ishiguro |
| 3 | * |
| 4 | * This file is part of GNU Zebra. |
| 5 | * |
| 6 | * GNU Zebra is free software; you can redistribute it and/or modify it |
| 7 | * under the terms of the GNU General Public License as published by the |
| 8 | * Free Software Foundation; either version 2, or (at your option) any |
| 9 | * later version. |
| 10 | * |
| 11 | * GNU Zebra is distributed in the hope that it will be useful, but |
| 12 | * WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 14 | * General Public License for more details. |
| 15 | * |
| 16 | * You should have received a copy of the GNU General Public License |
| 17 | * along with GNU Zebra; see the file COPYING. If not, write to the Free |
| 18 | * Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA |
| 19 | * 02111-1307, USA. |
| 20 | */ |
| 21 | |
| 22 | #include <zebra.h> |
| 23 | |
| 24 | /* For struct udphdr. */ |
| 25 | #include <netinet/udp.h> |
| 26 | |
| 27 | #include "prefix.h" |
| 28 | #include "filter.h" |
| 29 | #include "log.h" |
| 30 | #include "thread.h" |
| 31 | #include "memory.h" |
| 32 | #include "if.h" |
| 33 | #include "stream.h" |
| 34 | #include "table.h" |
| 35 | #include "command.h" |
| 36 | #include "sockopt.h" |
| 37 | #include "distribute.h" |
| 38 | #include "plist.h" |
| 39 | #include "routemap.h" |
paul | 718e374 | 2002-12-13 20:15:29 +0000 | [diff] [blame] | 40 | |
| 41 | #include "ripngd/ripngd.h" |
| 42 | #include "ripngd/ripng_route.h" |
| 43 | #include "ripngd/ripng_debug.h" |
paul | 41ce926 | 2003-04-19 15:54:03 +0000 | [diff] [blame] | 44 | #include "ripngd/ripng_ifrmap.h" |
paul | 718e374 | 2002-12-13 20:15:29 +0000 | [diff] [blame] | 45 | |
| 46 | #define min(a, b) ((a) < (b) ? (a) : (b)) |
| 47 | |
| 48 | /* RIPng structure which includes many parameters related to RIPng |
| 49 | protocol. If ripng couldn't active or ripng doesn't configured, |
| 50 | ripng->fd must be negative value. */ |
| 51 | struct ripng *ripng = NULL; |
| 52 | |
| 53 | enum |
| 54 | { |
| 55 | ripng_all_route, |
| 56 | ripng_changed_route, |
| 57 | ripng_split_horizon, |
| 58 | ripng_no_split_horizon |
| 59 | }; |
| 60 | |
| 61 | /* Prototypes. */ |
| 62 | void |
| 63 | ripng_output_process (struct interface *, struct sockaddr_in6 *, int, int); |
| 64 | |
| 65 | int |
| 66 | ripng_triggered_update (struct thread *); |
| 67 | |
| 68 | /* RIPng next hop specification. */ |
| 69 | struct ripng_nexthop |
| 70 | { |
| 71 | enum ripng_nexthop_type |
| 72 | { |
| 73 | RIPNG_NEXTHOP_UNSPEC, |
| 74 | RIPNG_NEXTHOP_ADDRESS |
| 75 | } flag; |
| 76 | struct in6_addr address; |
| 77 | }; |
| 78 | |
| 79 | /* Utility function for making IPv6 address string. */ |
| 80 | const char * |
| 81 | inet6_ntop (struct in6_addr *p) |
| 82 | { |
| 83 | static char buf[INET6_ADDRSTRLEN]; |
| 84 | |
| 85 | inet_ntop (AF_INET6, p, buf, INET6_ADDRSTRLEN); |
| 86 | |
| 87 | return buf; |
| 88 | } |
| 89 | |
| 90 | /* Allocate new ripng information. */ |
| 91 | struct ripng_info * |
| 92 | ripng_info_new () |
| 93 | { |
| 94 | struct ripng_info *new; |
| 95 | |
| 96 | new = XCALLOC (MTYPE_RIPNG_ROUTE, sizeof (struct ripng_info)); |
| 97 | return new; |
| 98 | } |
| 99 | |
| 100 | /* Free ripng information. */ |
| 101 | void |
| 102 | ripng_info_free (struct ripng_info *rinfo) |
| 103 | { |
| 104 | XFREE (MTYPE_RIPNG_ROUTE, rinfo); |
| 105 | } |
| 106 | |
| 107 | static int |
| 108 | setsockopt_so_recvbuf (int sock, int size) |
| 109 | { |
| 110 | int ret; |
| 111 | |
| 112 | ret = setsockopt (sock, SOL_SOCKET, SO_RCVBUF, (char *) &size, sizeof (int)); |
| 113 | if (ret < 0) |
| 114 | zlog (NULL, LOG_ERR, "can't setsockopt SO_RCVBUF"); |
| 115 | return ret; |
| 116 | } |
| 117 | |
| 118 | /* Create ripng socket. */ |
| 119 | int |
| 120 | ripng_make_socket (void) |
| 121 | { |
| 122 | int ret; |
| 123 | int sock; |
| 124 | struct sockaddr_in6 ripaddr; |
| 125 | |
| 126 | sock = socket (AF_INET6, SOCK_DGRAM, 0); |
| 127 | if (sock < 0) |
| 128 | { |
| 129 | zlog (NULL, LOG_ERR, "Can't make ripng socket"); |
| 130 | return sock; |
| 131 | } |
| 132 | |
| 133 | ret = setsockopt_so_recvbuf (sock, 8096); |
| 134 | if (ret < 0) |
| 135 | return ret; |
| 136 | ret = setsockopt_ipv6_pktinfo (sock, 1); |
| 137 | if (ret < 0) |
| 138 | return ret; |
| 139 | ret = setsockopt_ipv6_multicast_hops (sock, 255); |
| 140 | if (ret < 0) |
| 141 | return ret; |
| 142 | ret = setsockopt_ipv6_multicast_loop (sock, 0); |
| 143 | if (ret < 0) |
| 144 | return ret; |
| 145 | ret = setsockopt_ipv6_hoplimit (sock, 1); |
| 146 | if (ret < 0) |
| 147 | return ret; |
| 148 | |
| 149 | memset (&ripaddr, 0, sizeof (ripaddr)); |
| 150 | ripaddr.sin6_family = AF_INET6; |
| 151 | #ifdef SIN6_LEN |
| 152 | ripaddr.sin6_len = sizeof (struct sockaddr_in6); |
| 153 | #endif /* SIN6_LEN */ |
| 154 | ripaddr.sin6_port = htons (RIPNG_PORT_DEFAULT); |
| 155 | |
| 156 | ret = bind (sock, (struct sockaddr *) &ripaddr, sizeof (ripaddr)); |
| 157 | if (ret < 0) |
| 158 | { |
| 159 | zlog (NULL, LOG_ERR, "Can't bind ripng socket: %s.", strerror (errno)); |
| 160 | return ret; |
| 161 | } |
| 162 | return sock; |
| 163 | } |
| 164 | |
| 165 | /* Send RIPng packet. */ |
| 166 | int |
| 167 | ripng_send_packet (caddr_t buf, int bufsize, struct sockaddr_in6 *to, |
| 168 | struct interface *ifp) |
| 169 | { |
| 170 | int ret; |
| 171 | struct msghdr msg; |
| 172 | struct iovec iov; |
| 173 | struct cmsghdr *cmsgptr; |
| 174 | char adata [256]; |
| 175 | struct in6_pktinfo *pkt; |
| 176 | struct sockaddr_in6 addr; |
| 177 | |
| 178 | #ifdef DEBUG |
| 179 | if (to) |
| 180 | zlog_info ("DEBUG RIPng: send to %s", inet6_ntop (&to->sin6_addr)); |
| 181 | zlog_info ("DEBUG RIPng: send if %s", ifp->name); |
| 182 | zlog_info ("DEBUG RIPng: send packet size %d", bufsize); |
| 183 | #endif /* DEBUG */ |
| 184 | |
| 185 | memset (&addr, 0, sizeof (struct sockaddr_in6)); |
| 186 | addr.sin6_family = AF_INET6; |
| 187 | #ifdef SIN6_LEN |
| 188 | addr.sin6_len = sizeof (struct sockaddr_in6); |
| 189 | #endif /* SIN6_LEN */ |
| 190 | addr.sin6_flowinfo = htonl (RIPNG_PRIORITY_DEFAULT); |
| 191 | |
| 192 | /* When destination is specified. */ |
| 193 | if (to != NULL) |
| 194 | { |
| 195 | addr.sin6_addr = to->sin6_addr; |
| 196 | addr.sin6_port = to->sin6_port; |
| 197 | } |
| 198 | else |
| 199 | { |
| 200 | inet_pton(AF_INET6, RIPNG_GROUP, &addr.sin6_addr); |
| 201 | addr.sin6_port = htons (RIPNG_PORT_DEFAULT); |
| 202 | } |
| 203 | |
| 204 | msg.msg_name = (void *) &addr; |
| 205 | msg.msg_namelen = sizeof (struct sockaddr_in6); |
| 206 | msg.msg_iov = &iov; |
| 207 | msg.msg_iovlen = 1; |
| 208 | msg.msg_control = (void *) adata; |
| 209 | msg.msg_controllen = CMSG_SPACE(sizeof(struct in6_pktinfo)); |
| 210 | |
| 211 | iov.iov_base = buf; |
| 212 | iov.iov_len = bufsize; |
| 213 | |
| 214 | cmsgptr = (struct cmsghdr *)adata; |
| 215 | cmsgptr->cmsg_len = CMSG_LEN(sizeof (struct in6_pktinfo)); |
| 216 | cmsgptr->cmsg_level = IPPROTO_IPV6; |
| 217 | cmsgptr->cmsg_type = IPV6_PKTINFO; |
| 218 | |
| 219 | pkt = (struct in6_pktinfo *) CMSG_DATA (cmsgptr); |
| 220 | memset (&pkt->ipi6_addr, 0, sizeof (struct in6_addr)); |
| 221 | pkt->ipi6_ifindex = ifp->ifindex; |
| 222 | |
| 223 | ret = sendmsg (ripng->sock, &msg, 0); |
| 224 | |
| 225 | if (ret < 0) |
| 226 | zlog_warn ("RIPng send fail on %s: %s", ifp->name, strerror (errno)); |
| 227 | |
| 228 | return ret; |
| 229 | } |
| 230 | |
| 231 | /* Receive UDP RIPng packet from socket. */ |
| 232 | int |
| 233 | ripng_recv_packet (int sock, u_char *buf, int bufsize, |
| 234 | struct sockaddr_in6 *from, unsigned int *ifindex, |
| 235 | int *hoplimit) |
| 236 | { |
| 237 | int ret; |
| 238 | struct msghdr msg; |
| 239 | struct iovec iov; |
| 240 | struct cmsghdr *cmsgptr; |
| 241 | struct in6_addr dst; |
| 242 | |
| 243 | /* Ancillary data. This store cmsghdr and in6_pktinfo. But at this |
| 244 | point I can't determine size of cmsghdr */ |
| 245 | char adata[1024]; |
| 246 | |
| 247 | /* Fill in message and iovec. */ |
| 248 | msg.msg_name = (void *) from; |
| 249 | msg.msg_namelen = sizeof (struct sockaddr_in6); |
| 250 | msg.msg_iov = &iov; |
| 251 | msg.msg_iovlen = 1; |
| 252 | msg.msg_control = (void *) adata; |
| 253 | msg.msg_controllen = sizeof adata; |
| 254 | iov.iov_base = buf; |
| 255 | iov.iov_len = bufsize; |
| 256 | |
| 257 | /* If recvmsg fail return minus value. */ |
| 258 | ret = recvmsg (sock, &msg, 0); |
| 259 | if (ret < 0) |
| 260 | return ret; |
| 261 | |
| 262 | for (cmsgptr = CMSG_FIRSTHDR(&msg); cmsgptr != NULL; |
| 263 | cmsgptr = CMSG_NXTHDR(&msg, cmsgptr)) |
| 264 | { |
| 265 | /* I want interface index which this packet comes from. */ |
| 266 | if (cmsgptr->cmsg_level == IPPROTO_IPV6 && |
| 267 | cmsgptr->cmsg_type == IPV6_PKTINFO) |
| 268 | { |
| 269 | struct in6_pktinfo *ptr; |
| 270 | |
| 271 | ptr = (struct in6_pktinfo *) CMSG_DATA (cmsgptr); |
| 272 | *ifindex = ptr->ipi6_ifindex; |
| 273 | dst = ptr->ipi6_addr; |
| 274 | |
| 275 | if (*ifindex == 0) |
| 276 | zlog_warn ("Interface index returned by IPV6_PKTINFO is zero"); |
| 277 | } |
| 278 | |
| 279 | /* Incoming packet's multicast hop limit. */ |
| 280 | if (cmsgptr->cmsg_level == IPPROTO_IPV6 && |
| 281 | cmsgptr->cmsg_type == IPV6_HOPLIMIT) |
| 282 | *hoplimit = *((int *) CMSG_DATA (cmsgptr)); |
| 283 | } |
| 284 | |
| 285 | /* Hoplimit check shold be done when destination address is |
| 286 | multicast address. */ |
| 287 | if (! IN6_IS_ADDR_MULTICAST (&dst)) |
| 288 | *hoplimit = -1; |
| 289 | |
| 290 | return ret; |
| 291 | } |
| 292 | |
| 293 | /* Dump rip packet */ |
| 294 | void |
| 295 | ripng_packet_dump (struct ripng_packet *packet, int size, char *sndrcv) |
| 296 | { |
| 297 | caddr_t lim; |
| 298 | struct rte *rte; |
| 299 | char *command_str; |
| 300 | |
| 301 | /* Set command string. */ |
| 302 | if (packet->command == RIPNG_REQUEST) |
| 303 | command_str = "request"; |
| 304 | else if (packet->command == RIPNG_RESPONSE) |
| 305 | command_str = "response"; |
| 306 | else |
| 307 | command_str = "unknown"; |
| 308 | |
| 309 | /* Dump packet header. */ |
| 310 | zlog_info ("%s %s version %d packet size %d", |
| 311 | sndrcv, command_str, packet->version, size); |
| 312 | |
| 313 | /* Dump each routing table entry. */ |
| 314 | rte = packet->rte; |
| 315 | |
| 316 | for (lim = (caddr_t) packet + size; (caddr_t) rte < lim; rte++) |
| 317 | { |
| 318 | if (rte->metric == RIPNG_METRIC_NEXTHOP) |
| 319 | zlog_info (" nexthop %s/%d", inet6_ntop (&rte->addr), rte->prefixlen); |
| 320 | else |
| 321 | zlog_info (" %s/%d metric %d tag %d", |
| 322 | inet6_ntop (&rte->addr), rte->prefixlen, |
| 323 | rte->metric, ntohs (rte->tag)); |
| 324 | } |
| 325 | } |
| 326 | |
| 327 | /* RIPng next hop address RTE (Route Table Entry). */ |
| 328 | void |
| 329 | ripng_nexthop_rte (struct rte *rte, |
| 330 | struct sockaddr_in6 *from, |
| 331 | struct ripng_nexthop *nexthop) |
| 332 | { |
| 333 | char buf[INET6_BUFSIZ]; |
| 334 | |
| 335 | /* Logging before checking RTE. */ |
| 336 | if (IS_RIPNG_DEBUG_RECV) |
| 337 | zlog_info ("RIPng nexthop RTE address %s tag %d prefixlen %d", |
| 338 | inet6_ntop (&rte->addr), ntohs (rte->tag), rte->prefixlen); |
| 339 | |
| 340 | /* RFC2080 2.1.1 Next Hop: |
| 341 | The route tag and prefix length in the next hop RTE must be |
| 342 | set to zero on sending and ignored on receiption. */ |
| 343 | if (ntohs (rte->tag) != 0) |
| 344 | zlog_warn ("RIPng nexthop RTE with non zero tag value %d from %s", |
| 345 | ntohs (rte->tag), inet6_ntop (&from->sin6_addr)); |
| 346 | |
| 347 | if (rte->prefixlen != 0) |
| 348 | zlog_warn ("RIPng nexthop RTE with non zero prefixlen value %d from %s", |
| 349 | rte->prefixlen, inet6_ntop (&from->sin6_addr)); |
| 350 | |
| 351 | /* Specifying a value of 0:0:0:0:0:0:0:0 in the prefix field of a |
| 352 | next hop RTE indicates that the next hop address should be the |
| 353 | originator of the RIPng advertisement. An address specified as a |
| 354 | next hop must be a link-local address. */ |
| 355 | if (IN6_IS_ADDR_UNSPECIFIED (&rte->addr)) |
| 356 | { |
| 357 | nexthop->flag = RIPNG_NEXTHOP_UNSPEC; |
| 358 | memset (&nexthop->address, 0, sizeof (struct in6_addr)); |
| 359 | return; |
| 360 | } |
| 361 | |
| 362 | if (IN6_IS_ADDR_LINKLOCAL (&rte->addr)) |
| 363 | { |
| 364 | nexthop->flag = RIPNG_NEXTHOP_ADDRESS; |
| 365 | IPV6_ADDR_COPY (&nexthop->address, &rte->addr); |
| 366 | return; |
| 367 | } |
| 368 | |
| 369 | /* The purpose of the next hop RTE is to eliminate packets being |
| 370 | routed through extra hops in the system. It is particularly useful |
| 371 | when RIPng is not being run on all of the routers on a network. |
| 372 | Note that next hop RTE is "advisory". That is, if the provided |
| 373 | information is ignored, a possibly sub-optimal, but absolutely |
| 374 | valid, route may be taken. If the received next hop address is not |
| 375 | a link-local address, it should be treated as 0:0:0:0:0:0:0:0. */ |
| 376 | zlog_warn ("RIPng nexthop RTE with non link-local address %s from %s", |
| 377 | inet6_ntop (&rte->addr), |
| 378 | inet_ntop (AF_INET6, &from->sin6_addr, buf, INET6_BUFSIZ)); |
| 379 | |
| 380 | nexthop->flag = RIPNG_NEXTHOP_UNSPEC; |
| 381 | memset (&nexthop->address, 0, sizeof (struct in6_addr)); |
| 382 | |
| 383 | return; |
| 384 | } |
| 385 | |
| 386 | /* If ifp has same link-local address then return 1. */ |
| 387 | int |
| 388 | ripng_lladdr_check (struct interface *ifp, struct in6_addr *addr) |
| 389 | { |
| 390 | listnode listnode; |
| 391 | struct connected *connected; |
| 392 | struct prefix *p; |
| 393 | |
| 394 | for (listnode = listhead (ifp->connected); listnode; nextnode (listnode)) |
| 395 | if ((connected = getdata (listnode)) != NULL) |
| 396 | { |
| 397 | p = connected->address; |
| 398 | |
| 399 | if (p->family == AF_INET6 && |
| 400 | IN6_IS_ADDR_LINKLOCAL (&p->u.prefix6) && |
| 401 | IN6_ARE_ADDR_EQUAL (&p->u.prefix6, addr)) |
| 402 | return 1; |
| 403 | } |
| 404 | return 0; |
| 405 | } |
| 406 | |
| 407 | /* RIPng route garbage collect timer. */ |
| 408 | int |
| 409 | ripng_garbage_collect (struct thread *t) |
| 410 | { |
| 411 | struct ripng_info *rinfo; |
| 412 | struct route_node *rp; |
| 413 | |
| 414 | rinfo = THREAD_ARG (t); |
| 415 | rinfo->t_garbage_collect = NULL; |
| 416 | |
| 417 | /* Off timeout timer. */ |
| 418 | RIPNG_TIMER_OFF (rinfo->t_timeout); |
| 419 | |
| 420 | /* Get route_node pointer. */ |
| 421 | rp = rinfo->rp; |
| 422 | |
| 423 | /* Delete this route from the kernel. */ |
| 424 | ripng_zebra_ipv6_delete ((struct prefix_ipv6 *)&rp->p, |
| 425 | &rinfo->nexthop, rinfo->ifindex); |
| 426 | rinfo->flags &= ~RIPNG_RTF_FIB; |
| 427 | |
| 428 | /* Aggregate count decrement. */ |
| 429 | ripng_aggregate_decrement (rp, rinfo); |
| 430 | |
| 431 | /* Unlock route_node. */ |
| 432 | rp->info = NULL; |
| 433 | route_unlock_node (rp); |
| 434 | |
| 435 | /* Free RIPng routing information. */ |
| 436 | ripng_info_free (rinfo); |
| 437 | |
| 438 | return 0; |
| 439 | } |
| 440 | |
| 441 | /* Timeout RIPng routes. */ |
| 442 | int |
| 443 | ripng_timeout (struct thread *t) |
| 444 | { |
| 445 | struct ripng_info *rinfo; |
| 446 | struct route_node *rp; |
| 447 | |
| 448 | rinfo = THREAD_ARG (t); |
| 449 | rinfo->t_timeout = NULL; |
| 450 | |
| 451 | /* Get route_node pointer. */ |
| 452 | rp = rinfo->rp; |
| 453 | |
| 454 | /* - The garbage-collection timer is set for 120 seconds. */ |
| 455 | RIPNG_TIMER_ON (rinfo->t_garbage_collect, ripng_garbage_collect, |
| 456 | ripng->garbage_time); |
| 457 | |
| 458 | /* - The metric for the route is set to 16 (infinity). This causes |
| 459 | the route to be removed from service. */ |
| 460 | rinfo->metric = RIPNG_METRIC_INFINITY; |
| 461 | |
| 462 | /* - The route change flag is to indicate that this entry has been |
| 463 | changed. */ |
| 464 | rinfo->flags |= RIPNG_RTF_CHANGED; |
| 465 | |
| 466 | /* - The output process is signalled to trigger a response. */ |
| 467 | ripng_event (RIPNG_TRIGGERED_UPDATE, 0); |
| 468 | |
| 469 | return 0; |
| 470 | } |
| 471 | |
| 472 | void |
| 473 | ripng_timeout_update (struct ripng_info *rinfo) |
| 474 | { |
| 475 | if (rinfo->metric != RIPNG_METRIC_INFINITY) |
| 476 | { |
| 477 | RIPNG_TIMER_OFF (rinfo->t_timeout); |
| 478 | RIPNG_TIMER_ON (rinfo->t_timeout, ripng_timeout, ripng->timeout_time); |
| 479 | } |
| 480 | } |
| 481 | |
| 482 | /* Process RIPng route according to RFC2080. */ |
| 483 | void |
| 484 | ripng_route_process (struct rte *rte, struct sockaddr_in6 *from, |
| 485 | struct ripng_nexthop *ripng_nexthop, |
| 486 | struct interface *ifp) |
| 487 | { |
| 488 | struct prefix_ipv6 p; |
| 489 | struct route_node *rp; |
| 490 | struct ripng_info *rinfo; |
| 491 | struct ripng_interface *ri; |
| 492 | struct in6_addr *nexthop; |
| 493 | u_char oldmetric; |
| 494 | int same = 0; |
| 495 | |
| 496 | /* Make prefix structure. */ |
| 497 | memset (&p, 0, sizeof (struct prefix_ipv6)); |
| 498 | p.family = AF_INET6; |
| 499 | /* p.prefix = rte->addr; */ |
| 500 | IPV6_ADDR_COPY (&p.prefix, &rte->addr); |
| 501 | p.prefixlen = rte->prefixlen; |
| 502 | |
| 503 | /* Make sure mask is applied. */ |
| 504 | /* XXX We have to check the prefix is valid or not before call |
| 505 | apply_mask_ipv6. */ |
| 506 | apply_mask_ipv6 (&p); |
| 507 | |
| 508 | /* Apply input filters. */ |
| 509 | ri = ifp->info; |
| 510 | |
| 511 | if (ri->list[RIPNG_FILTER_IN]) |
| 512 | { |
| 513 | if (access_list_apply (ri->list[RIPNG_FILTER_IN], &p) == FILTER_DENY) |
| 514 | { |
| 515 | if (IS_RIPNG_DEBUG_PACKET) |
| 516 | zlog_info ("RIPng %s/%d is filtered by distribute in", |
| 517 | inet6_ntop (&p.prefix), p.prefixlen); |
| 518 | return; |
| 519 | } |
| 520 | } |
| 521 | if (ri->prefix[RIPNG_FILTER_IN]) |
| 522 | { |
| 523 | if (prefix_list_apply (ri->prefix[RIPNG_FILTER_IN], &p) == PREFIX_DENY) |
| 524 | { |
| 525 | if (IS_RIPNG_DEBUG_PACKET) |
| 526 | zlog_info ("RIPng %s/%d is filtered by prefix-list in", |
| 527 | inet6_ntop (&p.prefix), p.prefixlen); |
| 528 | return; |
| 529 | } |
| 530 | } |
| 531 | |
| 532 | /* Modify entry. */ |
| 533 | if (ri->routemap[RIPNG_FILTER_IN]) |
| 534 | { |
| 535 | int ret; |
| 536 | struct ripng_info newinfo; |
| 537 | |
paul | 41ce926 | 2003-04-19 15:54:03 +0000 | [diff] [blame] | 538 | memset (&newinfo, 0, sizeof (struct ripng_info)); |
paul | 718e374 | 2002-12-13 20:15:29 +0000 | [diff] [blame] | 539 | newinfo.metric = rte->metric; |
| 540 | |
| 541 | ret = route_map_apply (ri->routemap[RIPNG_FILTER_IN], |
| 542 | (struct prefix *)&p, RMAP_RIPNG, &newinfo); |
| 543 | |
| 544 | if (ret == RMAP_DENYMATCH) |
| 545 | { |
| 546 | if (IS_RIPNG_DEBUG_PACKET) |
| 547 | zlog_info ("RIPng %s/%d is filtered by route-map in", |
| 548 | inet6_ntop (&p.prefix), p.prefixlen); |
| 549 | return; |
| 550 | } |
| 551 | |
| 552 | rte->metric = newinfo.metric; |
| 553 | } |
| 554 | |
| 555 | /* Set nexthop pointer. */ |
| 556 | if (ripng_nexthop->flag == RIPNG_NEXTHOP_ADDRESS) |
| 557 | nexthop = &ripng_nexthop->address; |
| 558 | else |
| 559 | nexthop = &from->sin6_addr; |
| 560 | |
| 561 | /* Lookup RIPng routing table. */ |
| 562 | rp = route_node_get (ripng->table, (struct prefix *) &p); |
| 563 | |
| 564 | if (rp->info == NULL) |
| 565 | { |
| 566 | /* Now, check to see whether there is already an explicit route |
| 567 | for the destination prefix. If there is no such route, add |
| 568 | this route to the routing table, unless the metric is |
| 569 | infinity (there is no point in adding a route which |
| 570 | unusable). */ |
| 571 | if (rte->metric != RIPNG_METRIC_INFINITY) |
| 572 | { |
| 573 | rinfo = ripng_info_new (); |
| 574 | |
| 575 | /* - Setting the destination prefix and length to those in |
| 576 | the RTE. */ |
| 577 | rp->info = rinfo; |
| 578 | rinfo->rp = rp; |
| 579 | |
| 580 | /* - Setting the metric to the newly calculated metric (as |
| 581 | described above). */ |
| 582 | rinfo->metric = rte->metric; |
| 583 | rinfo->tag = ntohs (rte->tag); |
| 584 | |
| 585 | /* - Set the next hop address to be the address of the router |
| 586 | from which the datagram came or the next hop address |
| 587 | specified by a next hop RTE. */ |
| 588 | IPV6_ADDR_COPY (&rinfo->nexthop, nexthop); |
| 589 | IPV6_ADDR_COPY (&rinfo->from, &from->sin6_addr); |
| 590 | rinfo->ifindex = ifp->ifindex; |
| 591 | |
| 592 | /* - Initialize the timeout for the route. If the |
| 593 | garbage-collection timer is running for this route, stop it. */ |
| 594 | ripng_timeout_update (rinfo); |
| 595 | |
| 596 | /* - Set the route change flag. */ |
| 597 | rinfo->flags |= RIPNG_RTF_CHANGED; |
| 598 | |
| 599 | /* - Signal the output process to trigger an update (see section |
| 600 | 2.5). */ |
| 601 | ripng_event (RIPNG_TRIGGERED_UPDATE, 0); |
| 602 | |
| 603 | /* Finally, route goes into the kernel. */ |
| 604 | rinfo->type = ZEBRA_ROUTE_RIPNG; |
| 605 | rinfo->sub_type = RIPNG_ROUTE_RTE; |
| 606 | |
| 607 | ripng_zebra_ipv6_add (&p, &rinfo->nexthop, rinfo->ifindex); |
| 608 | rinfo->flags |= RIPNG_RTF_FIB; |
| 609 | |
| 610 | /* Aggregate check. */ |
| 611 | ripng_aggregate_increment (rp, rinfo); |
| 612 | } |
| 613 | } |
| 614 | else |
| 615 | { |
| 616 | rinfo = rp->info; |
| 617 | |
| 618 | /* If there is an existing route, compare the next hop address |
| 619 | to the address of the router from which the datagram came. |
| 620 | If this datagram is from the same router as the existing |
| 621 | route, reinitialize the timeout. */ |
| 622 | same = (IN6_ARE_ADDR_EQUAL (&rinfo->from, &from->sin6_addr) |
| 623 | && (rinfo->ifindex == ifp->ifindex)); |
| 624 | |
| 625 | if (same) |
| 626 | ripng_timeout_update (rinfo); |
| 627 | |
| 628 | /* Next, compare the metrics. If the datagram is from the same |
| 629 | router as the existing route, and the new metric is different |
| 630 | than the old one; or, if the new metric is lower than the old |
| 631 | one; do the following actions: */ |
| 632 | if ((same && rinfo->metric != rte->metric) || |
| 633 | rte->metric < rinfo->metric) |
| 634 | { |
| 635 | /* - Adopt the route from the datagram. That is, put the |
| 636 | new metric in, and adjust the next hop address (if |
| 637 | necessary). */ |
| 638 | oldmetric = rinfo->metric; |
| 639 | rinfo->metric = rte->metric; |
| 640 | rinfo->tag = ntohs (rte->tag); |
| 641 | |
| 642 | if (! IN6_ARE_ADDR_EQUAL (&rinfo->nexthop, nexthop)) |
| 643 | { |
| 644 | ripng_zebra_ipv6_delete (&p, &rinfo->nexthop, rinfo->ifindex); |
| 645 | ripng_zebra_ipv6_add (&p, nexthop, ifp->ifindex); |
| 646 | rinfo->flags |= RIPNG_RTF_FIB; |
| 647 | |
| 648 | IPV6_ADDR_COPY (&rinfo->nexthop, nexthop); |
| 649 | } |
| 650 | IPV6_ADDR_COPY (&rinfo->from, &from->sin6_addr); |
| 651 | rinfo->ifindex = ifp->ifindex; |
| 652 | |
| 653 | /* - Set the route change flag and signal the output process |
| 654 | to trigger an update. */ |
| 655 | rinfo->flags |= RIPNG_RTF_CHANGED; |
| 656 | ripng_event (RIPNG_TRIGGERED_UPDATE, 0); |
| 657 | |
| 658 | /* - If the new metric is infinity, start the deletion |
| 659 | process (described above); */ |
| 660 | if (rinfo->metric == RIPNG_METRIC_INFINITY) |
| 661 | { |
| 662 | /* If the new metric is infinity, the deletion process |
| 663 | begins for the route, which is no longer used for |
| 664 | routing packets. Note that the deletion process is |
| 665 | started only when the metric is first set to |
| 666 | infinity. If the metric was already infinity, then a |
| 667 | new deletion process is not started. */ |
| 668 | if (oldmetric != RIPNG_METRIC_INFINITY) |
| 669 | { |
| 670 | /* - The garbage-collection timer is set for 120 seconds. */ |
| 671 | RIPNG_TIMER_ON (rinfo->t_garbage_collect, |
| 672 | ripng_garbage_collect, ripng->garbage_time); |
| 673 | RIPNG_TIMER_OFF (rinfo->t_timeout); |
| 674 | |
| 675 | /* - The metric for the route is set to 16 |
| 676 | (infinity). This causes the route to be removed |
| 677 | from service.*/ |
| 678 | /* - The route change flag is to indicate that this |
| 679 | entry has been changed. */ |
| 680 | /* - The output process is signalled to trigger a |
| 681 | response. */ |
| 682 | ; /* Above processes are already done previously. */ |
| 683 | } |
| 684 | } |
| 685 | else |
| 686 | { |
| 687 | /* otherwise, re-initialize the timeout. */ |
| 688 | ripng_timeout_update (rinfo); |
| 689 | |
| 690 | /* Should a new route to this network be established |
| 691 | while the garbage-collection timer is running, the |
| 692 | new route will replace the one that is about to be |
| 693 | deleted. In this case the garbage-collection timer |
| 694 | must be cleared. */ |
| 695 | RIPNG_TIMER_OFF (rinfo->t_garbage_collect); |
| 696 | } |
| 697 | } |
| 698 | /* Unlock tempolary lock of the route. */ |
| 699 | route_unlock_node (rp); |
| 700 | } |
| 701 | } |
| 702 | |
| 703 | /* Add redistributed route to RIPng table. */ |
| 704 | void |
| 705 | ripng_redistribute_add (int type, int sub_type, struct prefix_ipv6 *p, |
| 706 | unsigned int ifindex) |
| 707 | { |
| 708 | struct route_node *rp; |
| 709 | struct ripng_info *rinfo; |
| 710 | |
| 711 | /* Redistribute route */ |
| 712 | if (IN6_IS_ADDR_LINKLOCAL (&p->prefix)) |
| 713 | return; |
| 714 | if (IN6_IS_ADDR_LOOPBACK (&p->prefix)) |
| 715 | return; |
| 716 | |
| 717 | rp = route_node_get (ripng->table, (struct prefix *) p); |
| 718 | rinfo = rp->info; |
| 719 | |
| 720 | if (rinfo) |
| 721 | { |
| 722 | RIPNG_TIMER_OFF (rinfo->t_timeout); |
| 723 | RIPNG_TIMER_OFF (rinfo->t_garbage_collect); |
| 724 | route_unlock_node (rp); |
| 725 | } |
| 726 | else |
| 727 | { |
| 728 | rinfo = ripng_info_new (); |
| 729 | ripng_aggregate_increment (rp, rinfo); |
| 730 | } |
| 731 | |
| 732 | rinfo->type = type; |
| 733 | rinfo->sub_type = sub_type; |
| 734 | rinfo->ifindex = ifindex; |
| 735 | rinfo->metric = 1; |
| 736 | rinfo->flags |= RIPNG_RTF_FIB; |
| 737 | |
| 738 | rinfo->rp = rp; |
| 739 | rp->info = rinfo; |
| 740 | } |
| 741 | |
| 742 | /* Delete redistributed route to RIPng table. */ |
| 743 | void |
| 744 | ripng_redistribute_delete (int type, int sub_type, struct prefix_ipv6 *p, |
| 745 | unsigned int ifindex) |
| 746 | { |
| 747 | struct route_node *rp; |
| 748 | struct ripng_info *rinfo; |
| 749 | |
| 750 | if (IN6_IS_ADDR_LINKLOCAL (&p->prefix)) |
| 751 | return; |
| 752 | if (IN6_IS_ADDR_LOOPBACK (&p->prefix)) |
| 753 | return; |
| 754 | |
| 755 | rp = route_node_lookup (ripng->table, (struct prefix *) p); |
| 756 | |
| 757 | if (rp) |
| 758 | { |
| 759 | rinfo = rp->info; |
| 760 | |
| 761 | if (rinfo != NULL |
| 762 | && rinfo->type == type |
| 763 | && rinfo->sub_type == sub_type |
| 764 | && rinfo->ifindex == ifindex) |
| 765 | { |
| 766 | rp->info = NULL; |
| 767 | |
| 768 | RIPNG_TIMER_OFF (rinfo->t_timeout); |
| 769 | RIPNG_TIMER_OFF (rinfo->t_garbage_collect); |
| 770 | |
| 771 | ripng_info_free (rinfo); |
| 772 | |
| 773 | route_unlock_node (rp); |
| 774 | } |
| 775 | |
| 776 | /* For unlock route_node_lookup (). */ |
| 777 | route_unlock_node (rp); |
| 778 | } |
| 779 | } |
| 780 | |
| 781 | /* Withdraw redistributed route. */ |
| 782 | void |
| 783 | ripng_redistribute_withdraw (int type) |
| 784 | { |
| 785 | struct route_node *rp; |
| 786 | struct ripng_info *rinfo; |
| 787 | |
| 788 | for (rp = route_top (ripng->table); rp; rp = route_next (rp)) |
| 789 | if ((rinfo = rp->info) != NULL) |
| 790 | { |
| 791 | if (rinfo->type == type) |
| 792 | { |
| 793 | rp->info = NULL; |
| 794 | |
| 795 | RIPNG_TIMER_OFF (rinfo->t_timeout); |
| 796 | RIPNG_TIMER_OFF (rinfo->t_garbage_collect); |
| 797 | |
| 798 | ripng_info_free (rinfo); |
| 799 | |
| 800 | route_unlock_node (rp); |
| 801 | } |
| 802 | } |
| 803 | } |
| 804 | |
| 805 | /* RIP routing information. */ |
| 806 | void |
| 807 | ripng_response_process (struct ripng_packet *packet, int size, |
| 808 | struct sockaddr_in6 *from, struct interface *ifp, |
| 809 | int hoplimit) |
| 810 | { |
| 811 | caddr_t lim; |
| 812 | struct rte *rte; |
| 813 | struct ripng_nexthop nexthop; |
| 814 | |
| 815 | /* RFC2080 2.4.2 Response Messages: |
| 816 | The Response must be ignored if it is not from the RIPng port. */ |
| 817 | if (ntohs (from->sin6_port) != RIPNG_PORT_DEFAULT) |
| 818 | { |
| 819 | zlog_warn ("RIPng packet comes from non RIPng port %d from %s", |
| 820 | ntohs (from->sin6_port), inet6_ntop (&from->sin6_addr)); |
| 821 | return; |
| 822 | } |
| 823 | |
| 824 | /* The datagram's IPv6 source address should be checked to see |
| 825 | whether the datagram is from a valid neighbor; the source of the |
| 826 | datagram must be a link-local address. */ |
| 827 | if (! IN6_IS_ADDR_LINKLOCAL(&from->sin6_addr)) |
| 828 | { |
| 829 | zlog_warn ("RIPng packet comes from non link local address %s", |
| 830 | inet6_ntop (&from->sin6_addr)); |
| 831 | return; |
| 832 | } |
| 833 | |
| 834 | /* It is also worth checking to see whether the response is from one |
| 835 | of the router's own addresses. Interfaces on broadcast networks |
| 836 | may receive copies of their own multicasts immediately. If a |
| 837 | router processes its own output as new input, confusion is likely, |
| 838 | and such datagrams must be ignored. */ |
| 839 | if (ripng_lladdr_check (ifp, &from->sin6_addr)) |
| 840 | { |
| 841 | zlog_warn ("RIPng packet comes from my own link local address %s", |
| 842 | inet6_ntop (&from->sin6_addr)); |
| 843 | return; |
| 844 | } |
| 845 | |
| 846 | /* As an additional check, periodic advertisements must have their |
| 847 | hop counts set to 255, and inbound, multicast packets sent from the |
| 848 | RIPng port (i.e. periodic advertisement or triggered update |
| 849 | packets) must be examined to ensure that the hop count is 255. */ |
| 850 | if (hoplimit >= 0 && hoplimit != 255) |
| 851 | { |
| 852 | zlog_warn ("RIPng packet comes with non 255 hop count %d from %s", |
| 853 | hoplimit, inet6_ntop (&from->sin6_addr)); |
| 854 | return; |
| 855 | } |
| 856 | |
| 857 | /* Reset nexthop. */ |
| 858 | memset (&nexthop, 0, sizeof (struct ripng_nexthop)); |
| 859 | nexthop.flag = RIPNG_NEXTHOP_UNSPEC; |
| 860 | |
| 861 | /* Set RTE pointer. */ |
| 862 | rte = packet->rte; |
| 863 | |
| 864 | for (lim = ((caddr_t) packet) + size; (caddr_t) rte < lim; rte++) |
| 865 | { |
| 866 | /* First of all, we have to check this RTE is next hop RTE or |
| 867 | not. Next hop RTE is completely different with normal RTE so |
| 868 | we need special treatment. */ |
| 869 | if (rte->metric == RIPNG_METRIC_NEXTHOP) |
| 870 | { |
| 871 | ripng_nexthop_rte (rte, from, &nexthop); |
| 872 | continue; |
| 873 | } |
| 874 | |
| 875 | /* RTE information validation. */ |
| 876 | |
| 877 | /* - is the destination prefix valid (e.g., not a multicast |
| 878 | prefix and not a link-local address) A link-local address |
| 879 | should never be present in an RTE. */ |
| 880 | if (IN6_IS_ADDR_MULTICAST (&rte->addr)) |
| 881 | { |
| 882 | zlog_warn ("Destination prefix is a multicast address %s/%d [%d]", |
| 883 | inet6_ntop (&rte->addr), rte->prefixlen, rte->metric); |
| 884 | continue; |
| 885 | } |
| 886 | if (IN6_IS_ADDR_LINKLOCAL (&rte->addr)) |
| 887 | { |
| 888 | zlog_warn ("Destination prefix is a link-local address %s/%d [%d]", |
| 889 | inet6_ntop (&rte->addr), rte->prefixlen, rte->metric); |
| 890 | continue; |
| 891 | } |
| 892 | if (IN6_IS_ADDR_LOOPBACK (&rte->addr)) |
| 893 | { |
| 894 | zlog_warn ("Destination prefix is a loopback address %s/%d [%d]", |
| 895 | inet6_ntop (&rte->addr), rte->prefixlen, rte->metric); |
| 896 | continue; |
| 897 | } |
| 898 | |
| 899 | /* - is the prefix length valid (i.e., between 0 and 128, |
| 900 | inclusive) */ |
| 901 | if (rte->prefixlen > 128) |
| 902 | { |
| 903 | zlog_warn ("Invalid prefix length %s/%d from %s%%%s", |
| 904 | inet6_ntop (&rte->addr), rte->prefixlen, |
| 905 | inet6_ntop (&from->sin6_addr), ifp->name); |
| 906 | continue; |
| 907 | } |
| 908 | |
| 909 | /* - is the metric valid (i.e., between 1 and 16, inclusive) */ |
| 910 | if (! (rte->metric >= 1 && rte->metric <= 16)) |
| 911 | { |
| 912 | zlog_warn ("Invalid metric %d from %s%%%s", rte->metric, |
| 913 | inet6_ntop (&from->sin6_addr), ifp->name); |
| 914 | continue; |
| 915 | } |
| 916 | |
| 917 | /* Metric calculation. */ |
| 918 | rte->metric += ifp->metric; |
| 919 | if (rte->metric > RIPNG_METRIC_INFINITY) |
| 920 | rte->metric = RIPNG_METRIC_INFINITY; |
| 921 | |
| 922 | /* Routing table updates. */ |
| 923 | ripng_route_process (rte, from, &nexthop, ifp); |
| 924 | } |
| 925 | } |
| 926 | |
| 927 | /* Response to request message. */ |
| 928 | void |
| 929 | ripng_request_process (struct ripng_packet *packet,int size, |
| 930 | struct sockaddr_in6 *from, struct interface *ifp) |
| 931 | { |
| 932 | caddr_t lim; |
| 933 | struct rte *rte; |
| 934 | struct prefix_ipv6 p; |
| 935 | struct route_node *rp; |
| 936 | struct ripng_info *rinfo; |
| 937 | struct ripng_interface *ri; |
| 938 | |
| 939 | /* Check RIPng process is enabled on this interface. */ |
| 940 | ri = ifp->info; |
| 941 | if (! ri->running) |
| 942 | return; |
| 943 | |
| 944 | /* When passive interface is specified, suppress responses */ |
| 945 | if (ri->passive) |
| 946 | return; |
| 947 | |
| 948 | lim = ((caddr_t) packet) + size; |
| 949 | rte = packet->rte; |
| 950 | |
| 951 | /* The Request is processed entry by entry. If there are no |
| 952 | entries, no response is given. */ |
| 953 | if (lim == (caddr_t) rte) |
| 954 | return; |
| 955 | |
| 956 | /* There is one special case. If there is exactly one entry in the |
| 957 | request, and it has a destination prefix of zero, a prefix length |
| 958 | of zero, and a metric of infinity (i.e., 16), then this is a |
| 959 | request to send the entire routing table. In that case, a call |
| 960 | is made to the output process to send the routing table to the |
| 961 | requesting address/port. */ |
| 962 | if (lim == ((caddr_t) (rte + 1)) && |
| 963 | IN6_IS_ADDR_UNSPECIFIED (&rte->addr) && |
| 964 | rte->prefixlen == 0 && |
| 965 | rte->metric == RIPNG_METRIC_INFINITY) |
| 966 | { |
| 967 | /* All route with split horizon */ |
| 968 | ripng_output_process (ifp, from, ripng_all_route, ripng_split_horizon); |
| 969 | } |
| 970 | else |
| 971 | { |
| 972 | /* Except for this special case, processing is quite simple. |
| 973 | Examine the list of RTEs in the Request one by one. For each |
| 974 | entry, look up the destination in the router's routing |
| 975 | database and, if there is a route, put that route's metric in |
| 976 | the metric field of the RTE. If there is no explicit route |
| 977 | to the specified destination, put infinity in the metric |
| 978 | field. Once all the entries have been filled in, change the |
| 979 | command from Request to Response and send the datagram back |
| 980 | to the requestor. */ |
| 981 | memset (&p, 0, sizeof (struct prefix_ipv6)); |
| 982 | p.family = AF_INET6; |
| 983 | |
| 984 | for (; ((caddr_t) rte) < lim; rte++) |
| 985 | { |
| 986 | p.prefix = rte->addr; |
| 987 | p.prefixlen = rte->prefixlen; |
| 988 | apply_mask_ipv6 (&p); |
| 989 | |
| 990 | rp = route_node_lookup (ripng->table, (struct prefix *) &p); |
| 991 | |
| 992 | if (rp) |
| 993 | { |
| 994 | rinfo = rp->info; |
| 995 | rte->metric = rinfo->metric; |
| 996 | route_unlock_node (rp); |
| 997 | } |
| 998 | else |
| 999 | rte->metric = RIPNG_METRIC_INFINITY; |
| 1000 | } |
| 1001 | packet->command = RIPNG_RESPONSE; |
| 1002 | |
| 1003 | ripng_send_packet ((caddr_t) packet, size, from, ifp); |
| 1004 | } |
| 1005 | } |
| 1006 | |
| 1007 | /* First entry point of reading RIPng packet. */ |
| 1008 | int |
| 1009 | ripng_read (struct thread *thread) |
| 1010 | { |
| 1011 | int len; |
| 1012 | int sock; |
| 1013 | struct sockaddr_in6 from; |
| 1014 | struct ripng_packet *packet; |
| 1015 | unsigned int ifindex; |
| 1016 | struct interface *ifp; |
| 1017 | int hoplimit = -1; |
| 1018 | |
| 1019 | /* Check ripng is active and alive. */ |
| 1020 | assert (ripng != NULL); |
| 1021 | assert (ripng->sock >= 0); |
| 1022 | |
| 1023 | /* Fetch thread data and set read pointer to empty for event |
| 1024 | managing. `sock' sould be same as ripng->sock. */ |
| 1025 | sock = THREAD_FD (thread); |
| 1026 | ripng->t_read = NULL; |
| 1027 | |
| 1028 | /* Add myself to the next event. */ |
| 1029 | ripng_event (RIPNG_READ, sock); |
| 1030 | |
| 1031 | /* Read RIPng packet. */ |
| 1032 | len = ripng_recv_packet (sock, STREAM_DATA (ripng->ibuf), |
| 1033 | STREAM_SIZE (ripng->ibuf), &from, &ifindex, |
| 1034 | &hoplimit); |
| 1035 | if (len < 0) |
| 1036 | { |
| 1037 | zlog_warn ("RIPng recvfrom failed: %s.", strerror (errno)); |
| 1038 | return len; |
| 1039 | } |
| 1040 | |
| 1041 | /* Check RTE boundary. RTE size (Packet length - RIPng header size |
| 1042 | (4)) must be multiple size of one RTE size (20). */ |
| 1043 | if (((len - 4) % 20) != 0) |
| 1044 | { |
| 1045 | zlog_warn ("RIPng invalid packet size %d from %s", len, |
| 1046 | inet6_ntop (&from.sin6_addr)); |
| 1047 | return 0; |
| 1048 | } |
| 1049 | |
| 1050 | packet = (struct ripng_packet *) STREAM_DATA (ripng->ibuf); |
| 1051 | ifp = if_lookup_by_index (ifindex); |
| 1052 | |
| 1053 | /* RIPng packet received. */ |
| 1054 | if (IS_RIPNG_DEBUG_EVENT) |
| 1055 | zlog_info ("RIPng packet received from %s port %d on %s", |
| 1056 | inet6_ntop (&from.sin6_addr), ntohs (from.sin6_port), |
| 1057 | ifp ? ifp->name : "unknown"); |
| 1058 | |
| 1059 | /* Logging before packet checking. */ |
| 1060 | if (IS_RIPNG_DEBUG_RECV) |
| 1061 | ripng_packet_dump (packet, len, "RECV"); |
| 1062 | |
| 1063 | /* Packet comes from unknown interface. */ |
| 1064 | if (ifp == NULL) |
| 1065 | { |
| 1066 | zlog_warn ("RIPng packet comes from unknown interface %d", ifindex); |
| 1067 | return 0; |
| 1068 | } |
| 1069 | |
| 1070 | /* Packet version mismatch checking. */ |
| 1071 | if (packet->version != ripng->version) |
| 1072 | { |
| 1073 | zlog_warn ("RIPng packet version %d doesn't fit to my version %d", |
| 1074 | packet->version, ripng->version); |
| 1075 | return 0; |
| 1076 | } |
| 1077 | |
| 1078 | /* Process RIPng packet. */ |
| 1079 | switch (packet->command) |
| 1080 | { |
| 1081 | case RIPNG_REQUEST: |
| 1082 | ripng_request_process (packet, len, &from, ifp); |
| 1083 | break; |
| 1084 | case RIPNG_RESPONSE: |
| 1085 | ripng_response_process (packet, len, &from, ifp, hoplimit); |
| 1086 | break; |
| 1087 | default: |
| 1088 | zlog_warn ("Invalid RIPng command %d", packet->command); |
| 1089 | break; |
| 1090 | } |
| 1091 | return 0; |
| 1092 | } |
| 1093 | |
| 1094 | /* Walk down the RIPng routing table then clear changed flag. */ |
| 1095 | void |
| 1096 | ripng_clear_changed_flag () |
| 1097 | { |
| 1098 | struct route_node *rp; |
| 1099 | struct ripng_info *rinfo; |
| 1100 | |
| 1101 | for (rp = route_top (ripng->table); rp; rp = route_next (rp)) |
| 1102 | if ((rinfo = rp->info) != NULL) |
| 1103 | if (rinfo->flags & RIPNG_RTF_CHANGED) |
| 1104 | rinfo->flags &= ~RIPNG_RTF_CHANGED; |
| 1105 | } |
| 1106 | |
| 1107 | /* Regular update of RIPng route. Send all routing formation to RIPng |
| 1108 | enabled interface. */ |
| 1109 | int |
| 1110 | ripng_update (struct thread *t) |
| 1111 | { |
| 1112 | listnode node; |
| 1113 | struct interface *ifp; |
| 1114 | struct ripng_interface *ri; |
| 1115 | |
| 1116 | /* Clear update timer thread. */ |
| 1117 | ripng->t_update = NULL; |
| 1118 | |
| 1119 | /* Logging update event. */ |
| 1120 | if (IS_RIPNG_DEBUG_EVENT) |
| 1121 | zlog_info ("RIPng update timer expired!"); |
| 1122 | |
| 1123 | /* Supply routes to each interface. */ |
| 1124 | for (node = listhead (iflist); node; nextnode (node)) |
| 1125 | { |
| 1126 | ifp = getdata (node); |
| 1127 | ri = ifp->info; |
| 1128 | |
| 1129 | if (if_is_loopback (ifp) || ! if_is_up (ifp)) |
| 1130 | continue; |
| 1131 | |
| 1132 | if (! ri->running) |
| 1133 | continue; |
| 1134 | |
| 1135 | /* When passive interface is specified, suppress announce to the |
| 1136 | interface. */ |
| 1137 | if (ri->passive) |
| 1138 | continue; |
| 1139 | |
| 1140 | #if RIPNG_ADVANCED |
| 1141 | if (ri->ri_send == RIPNG_SEND_OFF) |
| 1142 | { |
| 1143 | if (IS_RIPNG_DEBUG_EVENT) |
| 1144 | zlog (NULL, LOG_INFO, |
| 1145 | "[Event] RIPng send to if %d is suppressed by config", |
| 1146 | ifp->ifindex); |
| 1147 | continue; |
| 1148 | } |
| 1149 | #endif /* RIPNG_ADVANCED */ |
| 1150 | |
| 1151 | ripng_output_process (ifp, NULL, ripng_all_route, ripng_split_horizon); |
| 1152 | } |
| 1153 | |
| 1154 | /* Triggered updates may be suppressed if a regular update is due by |
| 1155 | the time the triggered update would be sent. */ |
| 1156 | if (ripng->t_triggered_interval) |
| 1157 | { |
| 1158 | thread_cancel (ripng->t_triggered_interval); |
| 1159 | ripng->t_triggered_interval = NULL; |
| 1160 | } |
| 1161 | ripng->trigger = 0; |
| 1162 | |
| 1163 | /* Reset flush event. */ |
| 1164 | ripng_event (RIPNG_UPDATE_EVENT, 0); |
| 1165 | |
| 1166 | return 0; |
| 1167 | } |
| 1168 | |
| 1169 | /* Triggered update interval timer. */ |
| 1170 | int |
| 1171 | ripng_triggered_interval (struct thread *t) |
| 1172 | { |
| 1173 | ripng->t_triggered_interval = NULL; |
| 1174 | |
| 1175 | if (ripng->trigger) |
| 1176 | { |
| 1177 | ripng->trigger = 0; |
| 1178 | ripng_triggered_update (t); |
| 1179 | } |
| 1180 | return 0; |
| 1181 | } |
| 1182 | |
| 1183 | /* Execute triggered update. */ |
| 1184 | int |
| 1185 | ripng_triggered_update (struct thread *t) |
| 1186 | { |
| 1187 | listnode node; |
| 1188 | struct interface *ifp; |
| 1189 | struct ripng_interface *ri; |
| 1190 | int interval; |
| 1191 | |
| 1192 | ripng->t_triggered_update = NULL; |
| 1193 | |
| 1194 | /* Cancel interval timer. */ |
| 1195 | if (ripng->t_triggered_interval) |
| 1196 | { |
| 1197 | thread_cancel (ripng->t_triggered_interval); |
| 1198 | ripng->t_triggered_interval = NULL; |
| 1199 | } |
| 1200 | ripng->trigger = 0; |
| 1201 | |
| 1202 | /* Logging triggered update. */ |
| 1203 | if (IS_RIPNG_DEBUG_EVENT) |
| 1204 | zlog_info ("RIPng triggered update!"); |
| 1205 | |
| 1206 | /* Split Horizon processing is done when generating triggered |
| 1207 | updates as well as normal updates (see section 2.6). */ |
| 1208 | for (node = listhead (iflist); node; nextnode (node)) |
| 1209 | { |
| 1210 | ifp = getdata (node); |
| 1211 | ri = ifp->info; |
| 1212 | |
| 1213 | if (if_is_loopback (ifp) || ! if_is_up (ifp)) |
| 1214 | continue; |
| 1215 | |
| 1216 | if (! ri->running) |
| 1217 | continue; |
| 1218 | |
| 1219 | /* When passive interface is specified, suppress announce to the |
| 1220 | interface. */ |
| 1221 | if (ri->passive) |
| 1222 | continue; |
| 1223 | |
| 1224 | ripng_output_process (ifp, NULL, ripng_changed_route, |
| 1225 | ripng_split_horizon); |
| 1226 | } |
| 1227 | |
| 1228 | /* Once all of the triggered updates have been generated, the route |
| 1229 | change flags should be cleared. */ |
| 1230 | ripng_clear_changed_flag (); |
| 1231 | |
| 1232 | /* After a triggered update is sent, a timer should be set for a |
| 1233 | random interval between 1 and 5 seconds. If other changes that |
| 1234 | would trigger updates occur before the timer expires, a single |
| 1235 | update is triggered when the timer expires. */ |
| 1236 | interval = (random () % 5) + 1; |
| 1237 | |
| 1238 | ripng->t_triggered_interval = |
| 1239 | thread_add_timer (master, ripng_triggered_interval, NULL, interval); |
| 1240 | |
| 1241 | return 0; |
| 1242 | } |
| 1243 | |
| 1244 | /* Write routing table entry to the stream and return next index of |
| 1245 | the routing table entry in the stream. */ |
| 1246 | int |
| 1247 | ripng_write_rte (int num, struct stream *s, struct prefix_ipv6 *p, |
| 1248 | u_int16_t tag, u_char metric) |
| 1249 | { |
| 1250 | /* RIPng packet header. */ |
| 1251 | if (num == 0) |
| 1252 | { |
| 1253 | stream_putc (s, RIPNG_RESPONSE); |
| 1254 | stream_putc (s, RIPNG_V1); |
| 1255 | stream_putw (s, 0); |
| 1256 | } |
| 1257 | |
| 1258 | /* Write routing table entry. */ |
| 1259 | stream_write (s, (caddr_t) &p->prefix, sizeof (struct in6_addr)); |
| 1260 | stream_putw (s, tag); |
| 1261 | stream_putc (s, p->prefixlen); |
| 1262 | stream_putc (s, metric); |
| 1263 | |
| 1264 | return ++num; |
| 1265 | } |
| 1266 | |
| 1267 | /* Send RESPONSE message to specified destination. */ |
| 1268 | void |
| 1269 | ripng_output_process (struct interface *ifp, struct sockaddr_in6 *to, |
| 1270 | int route_type, int split_horizon) |
| 1271 | { |
| 1272 | int ret; |
| 1273 | struct stream *s; |
| 1274 | struct route_node *rp; |
| 1275 | struct ripng_info *rinfo; |
| 1276 | struct ripng_interface *ri; |
| 1277 | struct ripng_aggregate *aggregate; |
| 1278 | struct prefix_ipv6 *p; |
| 1279 | int num; |
| 1280 | int mtu; |
| 1281 | int rtemax; |
| 1282 | u_char metric; |
| 1283 | u_char metric_set; |
| 1284 | |
| 1285 | if (IS_RIPNG_DEBUG_EVENT) |
| 1286 | zlog_info ("RIPng update routes on interface %s", ifp->name); |
| 1287 | |
| 1288 | /* Output stream get from ripng structre. XXX this should be |
| 1289 | interface structure. */ |
| 1290 | s = ripng->obuf; |
| 1291 | |
| 1292 | /* Reset stream and RTE counter. */ |
| 1293 | stream_reset (s); |
| 1294 | num = 0; |
| 1295 | |
| 1296 | mtu = ifp->mtu; |
| 1297 | if (mtu < 0) |
| 1298 | mtu = IFMINMTU; |
| 1299 | |
| 1300 | rtemax = (min (mtu, RIPNG_MAX_PACKET_SIZE) - |
| 1301 | IPV6_HDRLEN - |
| 1302 | sizeof (struct udphdr) - |
| 1303 | sizeof (struct ripng_packet) + |
| 1304 | sizeof (struct rte)) / sizeof (struct rte); |
| 1305 | |
| 1306 | #ifdef DEBUG |
| 1307 | zlog_info ("DEBUG RIPng: ifmtu is %d", ifp->mtu); |
| 1308 | zlog_info ("DEBUG RIPng: rtemax is %d", rtemax); |
| 1309 | #endif /* DEBUG */ |
| 1310 | |
| 1311 | /* Get RIPng interface. */ |
| 1312 | ri = ifp->info; |
| 1313 | |
| 1314 | for (rp = route_top (ripng->table); rp; rp = route_next (rp)) |
| 1315 | { |
| 1316 | if ((rinfo = rp->info) != NULL && rinfo->suppress == 0) |
| 1317 | { |
| 1318 | p = (struct prefix_ipv6 *) &rp->p; |
| 1319 | metric = rinfo->metric; |
| 1320 | |
| 1321 | /* Changed route only output. */ |
| 1322 | if (route_type == ripng_changed_route && |
| 1323 | (! (rinfo->flags & RIPNG_RTF_CHANGED))) |
| 1324 | continue; |
| 1325 | |
| 1326 | /* Split horizon. */ |
| 1327 | if (split_horizon == ripng_split_horizon && |
| 1328 | rinfo->ifindex == ifp->ifindex) |
| 1329 | continue; |
| 1330 | |
| 1331 | /* Apply output filters.*/ |
| 1332 | if (ri->list[RIPNG_FILTER_OUT]) |
| 1333 | { |
| 1334 | if (access_list_apply (ri->list[RIPNG_FILTER_OUT], |
| 1335 | (struct prefix *) p) == FILTER_DENY) |
| 1336 | { |
| 1337 | if (IS_RIPNG_DEBUG_PACKET) |
| 1338 | zlog_info ("RIPng %s/%d is filtered by distribute out", |
| 1339 | inet6_ntop (&p->prefix), p->prefixlen); |
| 1340 | continue; |
| 1341 | } |
| 1342 | } |
| 1343 | if (ri->prefix[RIPNG_FILTER_OUT]) |
| 1344 | { |
| 1345 | if (prefix_list_apply (ri->prefix[RIPNG_FILTER_OUT], |
| 1346 | (struct prefix *) p) == PREFIX_DENY) |
| 1347 | { |
| 1348 | if (IS_RIPNG_DEBUG_PACKET) |
| 1349 | zlog_info ("RIPng %s/%d is filtered by prefix-list out", |
| 1350 | inet6_ntop (&p->prefix), p->prefixlen); |
| 1351 | continue; |
| 1352 | } |
| 1353 | } |
| 1354 | |
| 1355 | /* Preparation for route-map. */ |
| 1356 | metric_set = 0; |
| 1357 | |
| 1358 | /* Route-map */ |
| 1359 | if (ri->routemap[RIPNG_FILTER_OUT]) |
| 1360 | { |
| 1361 | int ret; |
| 1362 | struct ripng_info newinfo; |
| 1363 | |
| 1364 | memset (&newinfo, 0, sizeof (struct ripng_info)); |
| 1365 | newinfo.metric = metric; |
| 1366 | |
| 1367 | ret = route_map_apply (ri->routemap[RIPNG_FILTER_OUT], |
| 1368 | (struct prefix *) p, RMAP_RIPNG, |
| 1369 | &newinfo); |
| 1370 | |
| 1371 | if (ret == RMAP_DENYMATCH) |
| 1372 | { |
| 1373 | if (IS_RIPNG_DEBUG_PACKET) |
| 1374 | zlog_info ("RIPng %s/%d is filtered by route-map out", |
| 1375 | inet6_ntop (&p->prefix), p->prefixlen); |
| 1376 | return; |
| 1377 | } |
| 1378 | |
| 1379 | metric = newinfo.metric; |
| 1380 | metric_set = newinfo.metric_set; |
| 1381 | } |
| 1382 | |
| 1383 | /* When the interface route-map does not set metric */ |
| 1384 | if (! metric_set) |
| 1385 | { |
| 1386 | /* and the redistribute route-map is set. */ |
| 1387 | if (ripng->route_map[rinfo->type].name) |
| 1388 | { |
| 1389 | int ret; |
| 1390 | struct ripng_info newinfo; |
| 1391 | |
| 1392 | memset (&newinfo, 0, sizeof (struct ripng_info)); |
| 1393 | newinfo.metric = metric; |
| 1394 | |
| 1395 | ret = route_map_apply (ripng->route_map[rinfo->type].map, |
| 1396 | (struct prefix *) p, RMAP_RIPNG, |
| 1397 | &newinfo); |
| 1398 | |
| 1399 | if (ret == RMAP_DENYMATCH) |
| 1400 | { |
| 1401 | if (IS_RIPNG_DEBUG_PACKET) |
| 1402 | zlog_info ("RIPng %s/%d is filtered by route-map", |
| 1403 | inet6_ntop (&p->prefix), p->prefixlen); |
| 1404 | continue; |
| 1405 | } |
| 1406 | |
| 1407 | metric = newinfo.metric; |
| 1408 | metric_set = newinfo.metric_set; |
| 1409 | } |
| 1410 | |
| 1411 | /* When the redistribute route-map does not set metric. */ |
| 1412 | if (! metric_set) |
| 1413 | { |
| 1414 | /* If the redistribute metric is set. */ |
| 1415 | if (ripng->route_map[rinfo->type].metric_config |
| 1416 | && rinfo->metric != RIPNG_METRIC_INFINITY) |
| 1417 | { |
| 1418 | metric = ripng->route_map[rinfo->type].metric; |
| 1419 | } |
| 1420 | else |
| 1421 | { |
| 1422 | /* If the route is not connected or localy generated |
| 1423 | one, use default-metric value */ |
| 1424 | if (rinfo->type != ZEBRA_ROUTE_RIPNG |
| 1425 | && rinfo->type != ZEBRA_ROUTE_CONNECT |
| 1426 | && rinfo->metric != RIPNG_METRIC_INFINITY) |
| 1427 | metric = ripng->default_metric; |
| 1428 | } |
| 1429 | } |
| 1430 | } |
| 1431 | |
| 1432 | /* Write RTE to the stream. */ |
| 1433 | num = ripng_write_rte (num, s, p, rinfo->tag, metric); |
| 1434 | if (num == rtemax) |
| 1435 | { |
| 1436 | ret = ripng_send_packet (STREAM_DATA (s), stream_get_endp (s), |
| 1437 | to, ifp); |
| 1438 | |
| 1439 | if (ret >= 0 && IS_RIPNG_DEBUG_SEND) |
| 1440 | ripng_packet_dump ((struct ripng_packet *)STREAM_DATA (s), |
| 1441 | stream_get_endp(s), "SEND"); |
| 1442 | num = 0; |
| 1443 | stream_reset (s); |
| 1444 | } |
| 1445 | } |
| 1446 | if ((aggregate = rp->aggregate) != NULL && |
| 1447 | aggregate->count > 0 && |
| 1448 | aggregate->suppress == 0) |
| 1449 | { |
| 1450 | p = (struct prefix_ipv6 *) &rp->p; |
| 1451 | metric = aggregate->metric; |
| 1452 | |
| 1453 | /* Apply output filters.*/ |
| 1454 | if (ri->list[RIPNG_FILTER_OUT]) |
| 1455 | { |
| 1456 | if (access_list_apply (ri->list[RIPNG_FILTER_OUT], |
| 1457 | (struct prefix *) p) == FILTER_DENY) |
| 1458 | { |
| 1459 | if (IS_RIPNG_DEBUG_PACKET) |
| 1460 | zlog_info ("RIPng %s/%d is filtered by distribute out", |
| 1461 | inet6_ntop (&p->prefix), p->prefixlen); |
| 1462 | continue; |
| 1463 | } |
| 1464 | } |
| 1465 | if (ri->prefix[RIPNG_FILTER_OUT]) |
| 1466 | { |
| 1467 | if (prefix_list_apply (ri->prefix[RIPNG_FILTER_OUT], |
| 1468 | (struct prefix *) p) == PREFIX_DENY) |
| 1469 | { |
| 1470 | if (IS_RIPNG_DEBUG_PACKET) |
| 1471 | zlog_info ("RIPng %s/%d is filtered by prefix-list out", |
| 1472 | inet6_ntop (&p->prefix), p->prefixlen); |
| 1473 | continue; |
| 1474 | } |
| 1475 | } |
| 1476 | |
| 1477 | /* Route-map */ |
| 1478 | if (ri->routemap[RIPNG_FILTER_OUT]) |
| 1479 | { |
| 1480 | int ret; |
| 1481 | struct ripng_info newinfo; |
| 1482 | |
| 1483 | memset (&newinfo, 0, sizeof (struct ripng_info)); |
| 1484 | newinfo.metric = metric; |
| 1485 | |
| 1486 | ret = route_map_apply (ri->routemap[RIPNG_FILTER_OUT], |
| 1487 | (struct prefix *) p, RMAP_RIPNG, |
| 1488 | &newinfo); |
| 1489 | |
| 1490 | if (ret == RMAP_DENYMATCH) |
| 1491 | { |
| 1492 | if (IS_RIPNG_DEBUG_PACKET) |
| 1493 | zlog_info ("RIPng %s/%d is filtered by route-map out", |
| 1494 | inet6_ntop (&p->prefix), p->prefixlen); |
| 1495 | return; |
| 1496 | } |
| 1497 | |
| 1498 | metric = newinfo.metric; |
| 1499 | } |
| 1500 | |
| 1501 | /* Changed route only output. */ |
| 1502 | if (route_type == ripng_changed_route) |
| 1503 | continue; |
| 1504 | |
| 1505 | /* Write RTE to the stream. */ |
| 1506 | num = ripng_write_rte (num, s, p, aggregate->tag, metric); |
| 1507 | if (num == rtemax) |
| 1508 | { |
| 1509 | ret = ripng_send_packet (STREAM_DATA (s), stream_get_endp (s), |
| 1510 | to, ifp); |
| 1511 | |
| 1512 | if (ret >= 0 && IS_RIPNG_DEBUG_SEND) |
| 1513 | ripng_packet_dump ((struct ripng_packet *)STREAM_DATA (s), |
| 1514 | stream_get_endp(s), "SEND"); |
| 1515 | num = 0; |
| 1516 | stream_reset (s); |
| 1517 | } |
| 1518 | } |
| 1519 | |
| 1520 | } |
| 1521 | |
| 1522 | /* If unwritten RTE exist, flush it. */ |
| 1523 | if (num != 0) |
| 1524 | { |
| 1525 | ret = ripng_send_packet (STREAM_DATA (s), stream_get_endp (s), |
| 1526 | to, ifp); |
| 1527 | |
| 1528 | if (ret >= 0 && IS_RIPNG_DEBUG_SEND) |
| 1529 | ripng_packet_dump ((struct ripng_packet *)STREAM_DATA (s), |
| 1530 | stream_get_endp (s), "SEND"); |
| 1531 | num = 0; |
| 1532 | stream_reset (s); |
| 1533 | } |
| 1534 | } |
| 1535 | |
| 1536 | /* Create new RIPng instance and set it to global variable. */ |
| 1537 | int |
| 1538 | ripng_create () |
| 1539 | { |
| 1540 | /* ripng should be NULL. */ |
| 1541 | assert (ripng == NULL); |
| 1542 | |
| 1543 | /* Allocaste RIPng instance. */ |
| 1544 | ripng = XMALLOC (0, sizeof (struct ripng)); |
| 1545 | memset (ripng, 0, sizeof (struct ripng)); |
| 1546 | |
| 1547 | /* Default version and timer values. */ |
| 1548 | ripng->version = RIPNG_V1; |
| 1549 | ripng->update_time = RIPNG_UPDATE_TIMER_DEFAULT; |
| 1550 | ripng->timeout_time = RIPNG_TIMEOUT_TIMER_DEFAULT; |
| 1551 | ripng->garbage_time = RIPNG_GARBAGE_TIMER_DEFAULT; |
| 1552 | ripng->default_metric = RIPNG_DEFAULT_METRIC_DEFAULT; |
| 1553 | |
| 1554 | /* Make buffer. */ |
| 1555 | ripng->ibuf = stream_new (RIPNG_MAX_PACKET_SIZE * 5); |
| 1556 | ripng->obuf = stream_new (RIPNG_MAX_PACKET_SIZE); |
| 1557 | |
| 1558 | /* Initialize RIPng routig table. */ |
| 1559 | ripng->table = route_table_init (); |
| 1560 | ripng->route = route_table_init (); |
| 1561 | ripng->aggregate = route_table_init (); |
| 1562 | |
| 1563 | /* Make socket. */ |
| 1564 | ripng->sock = ripng_make_socket (); |
| 1565 | if (ripng->sock < 0) |
| 1566 | return ripng->sock; |
| 1567 | |
| 1568 | /* Threads. */ |
| 1569 | ripng_event (RIPNG_READ, ripng->sock); |
| 1570 | ripng_event (RIPNG_UPDATE_EVENT, 1); |
| 1571 | |
| 1572 | return 0; |
| 1573 | } |
| 1574 | |
| 1575 | /* Sned RIPng request to the interface. */ |
| 1576 | int |
| 1577 | ripng_request (struct interface *ifp) |
| 1578 | { |
| 1579 | struct rte *rte; |
| 1580 | struct ripng_packet ripng_packet; |
| 1581 | |
| 1582 | if (IS_RIPNG_DEBUG_EVENT) |
| 1583 | zlog_info ("RIPng send request to %s", ifp->name); |
| 1584 | |
| 1585 | memset (&ripng_packet, 0, sizeof (ripng_packet)); |
| 1586 | ripng_packet.command = RIPNG_REQUEST; |
| 1587 | ripng_packet.version = RIPNG_V1; |
| 1588 | rte = ripng_packet.rte; |
| 1589 | rte->metric = RIPNG_METRIC_INFINITY; |
| 1590 | |
| 1591 | return ripng_send_packet ((caddr_t) &ripng_packet, sizeof (ripng_packet), |
| 1592 | NULL, ifp); |
| 1593 | } |
| 1594 | |
| 1595 | /* Clean up installed RIPng routes. */ |
| 1596 | void |
| 1597 | ripng_terminate () |
| 1598 | { |
| 1599 | struct route_node *rp; |
| 1600 | struct ripng_info *rinfo; |
| 1601 | |
| 1602 | for (rp = route_top (ripng->table); rp; rp = route_next (rp)) |
| 1603 | if ((rinfo = rp->info) != NULL) |
| 1604 | { |
| 1605 | if (rinfo->type == ZEBRA_ROUTE_RIPNG && |
| 1606 | rinfo->sub_type == RIPNG_ROUTE_RTE) |
| 1607 | ripng_zebra_ipv6_delete ((struct prefix_ipv6 *)&rp->p, |
| 1608 | &rinfo->nexthop, rinfo->ifindex); |
| 1609 | } |
| 1610 | } |
| 1611 | |
| 1612 | int |
| 1613 | ripng_update_jitter (int time) |
| 1614 | { |
| 1615 | return ((rand () % (time + 1)) - (time / 2)); |
| 1616 | } |
| 1617 | |
| 1618 | void |
| 1619 | ripng_event (enum ripng_event event, int sock) |
| 1620 | { |
| 1621 | int ripng_request_all (struct thread *); |
| 1622 | int jitter = 0; |
| 1623 | |
| 1624 | switch (event) |
| 1625 | { |
| 1626 | case RIPNG_READ: |
| 1627 | if (!ripng->t_read) |
| 1628 | ripng->t_read = thread_add_read (master, ripng_read, NULL, sock); |
| 1629 | break; |
| 1630 | case RIPNG_UPDATE_EVENT: |
| 1631 | if (ripng->t_update) |
| 1632 | { |
| 1633 | thread_cancel (ripng->t_update); |
| 1634 | ripng->t_update = NULL; |
| 1635 | } |
| 1636 | /* Update timer jitter. */ |
| 1637 | jitter = ripng_update_jitter (ripng->update_time); |
| 1638 | |
| 1639 | ripng->t_update = |
| 1640 | thread_add_timer (master, ripng_update, NULL, |
| 1641 | sock ? 2 : ripng->update_time + jitter); |
| 1642 | break; |
| 1643 | case RIPNG_TRIGGERED_UPDATE: |
| 1644 | if (ripng->t_triggered_interval) |
| 1645 | ripng->trigger = 1; |
| 1646 | else if (! ripng->t_triggered_update) |
| 1647 | ripng->t_triggered_update = |
| 1648 | thread_add_event (master, ripng_triggered_update, NULL, 0); |
| 1649 | break; |
| 1650 | default: |
| 1651 | break; |
| 1652 | } |
| 1653 | } |
| 1654 | |
| 1655 | /* Each route type's strings and default preference. */ |
| 1656 | struct |
| 1657 | { |
| 1658 | int key; |
| 1659 | char *str; |
| 1660 | char *str_long; |
| 1661 | int distance; |
| 1662 | } route_info[] = |
| 1663 | { |
| 1664 | { ZEBRA_ROUTE_SYSTEM, "X", "system", 10}, |
| 1665 | { ZEBRA_ROUTE_KERNEL, "K", "kernel", 20}, |
| 1666 | { ZEBRA_ROUTE_CONNECT, "C", "connected", 30}, |
| 1667 | { ZEBRA_ROUTE_STATIC, "S", "static", 40}, |
| 1668 | { ZEBRA_ROUTE_RIP, "R", "rip", 50}, |
| 1669 | { ZEBRA_ROUTE_RIPNG, "R", "ripng", 50}, |
| 1670 | { ZEBRA_ROUTE_OSPF, "O", "ospf", 60}, |
| 1671 | { ZEBRA_ROUTE_OSPF6, "O", "ospf6", 60}, |
| 1672 | { ZEBRA_ROUTE_BGP, "B", "bgp", 70}, |
| 1673 | }; |
| 1674 | |
| 1675 | /* For messages. */ |
| 1676 | struct message ripng_route_info[] = |
| 1677 | { |
| 1678 | { RIPNG_ROUTE_RTE, " "}, |
| 1679 | { RIPNG_ROUTE_STATIC, "S"}, |
| 1680 | { RIPNG_ROUTE_AGGREGATE, "a"} |
| 1681 | }; |
| 1682 | |
| 1683 | /* Print out routes update time. */ |
| 1684 | static void |
| 1685 | ripng_vty_out_uptime (struct vty *vty, struct ripng_info *rinfo) |
| 1686 | { |
| 1687 | struct timeval timer_now; |
| 1688 | time_t clock; |
| 1689 | struct tm *tm; |
| 1690 | #define TIME_BUF 25 |
| 1691 | char timebuf [TIME_BUF]; |
| 1692 | struct thread *thread; |
| 1693 | |
| 1694 | gettimeofday (&timer_now, NULL); |
| 1695 | |
| 1696 | if ((thread = rinfo->t_timeout) != NULL) |
| 1697 | { |
| 1698 | clock = thread->u.sands.tv_sec - timer_now.tv_sec; |
| 1699 | tm = gmtime (&clock); |
| 1700 | strftime (timebuf, TIME_BUF, "%M:%S", tm); |
| 1701 | vty_out (vty, "%5s", timebuf); |
| 1702 | } |
| 1703 | else if ((thread = rinfo->t_garbage_collect) != NULL) |
| 1704 | { |
| 1705 | clock = thread->u.sands.tv_sec - timer_now.tv_sec; |
| 1706 | tm = gmtime (&clock); |
| 1707 | strftime (timebuf, TIME_BUF, "%M:%S", tm); |
| 1708 | vty_out (vty, "%5s", timebuf); |
| 1709 | } |
| 1710 | } |
| 1711 | |
| 1712 | DEFUN (show_ipv6_ripng, |
| 1713 | show_ipv6_ripng_cmd, |
| 1714 | "show ipv6 ripng", |
| 1715 | SHOW_STR |
| 1716 | IP_STR |
| 1717 | "Show RIPng routes\n") |
| 1718 | { |
| 1719 | struct route_node *rp; |
| 1720 | struct ripng_info *rinfo; |
| 1721 | struct ripng_aggregate *aggregate; |
| 1722 | struct prefix_ipv6 *p; |
| 1723 | int len; |
| 1724 | |
| 1725 | /* Header of display. */ |
| 1726 | vty_out (vty, "%sCodes: R - RIPng%s%s" |
| 1727 | " Network " |
| 1728 | "Next Hop If Met Tag Time%s", VTY_NEWLINE, |
| 1729 | VTY_NEWLINE, VTY_NEWLINE, VTY_NEWLINE); |
| 1730 | |
| 1731 | for (rp = route_top (ripng->table); rp; rp = route_next (rp)) |
| 1732 | { |
| 1733 | if ((aggregate = rp->aggregate) != NULL) |
| 1734 | { |
| 1735 | p = (struct prefix_ipv6 *) &rp->p; |
| 1736 | |
| 1737 | #ifdef DEBUG |
| 1738 | len = vty_out (vty, "Ra %d/%d %s/%d ", |
| 1739 | aggregate->count, aggregate->suppress, |
| 1740 | inet6_ntop (&p->prefix), p->prefixlen); |
| 1741 | #else |
| 1742 | len = vty_out (vty, "Ra %s/%d ", |
| 1743 | inet6_ntop (&p->prefix), p->prefixlen); |
| 1744 | #endif /* DEBUG */ |
| 1745 | |
| 1746 | len = 37 - len; |
| 1747 | if (len > 0) |
| 1748 | vty_out (vty, "%*s", len, " "); |
| 1749 | |
| 1750 | vty_out (vty, "%*s", 26, " "); |
| 1751 | vty_out (vty, "%4d %3d%s", aggregate->metric, |
| 1752 | aggregate->tag, |
| 1753 | VTY_NEWLINE); |
| 1754 | } |
| 1755 | |
| 1756 | if ((rinfo = rp->info) != NULL) |
| 1757 | { |
| 1758 | p = (struct prefix_ipv6 *) &rp->p; |
| 1759 | |
| 1760 | #ifdef DEBUG |
| 1761 | len = vty_out (vty, "%s%s 0/%d %s/%d ", |
| 1762 | route_info[rinfo->type].str, |
| 1763 | rinfo->suppress ? "s" : " ", |
| 1764 | rinfo->suppress, |
| 1765 | inet6_ntop (&p->prefix), p->prefixlen); |
| 1766 | #else |
| 1767 | len = vty_out (vty, "%s%s %s/%d ", |
| 1768 | route_info[rinfo->type].str, |
| 1769 | rinfo->suppress ? "s" : " ", |
| 1770 | inet6_ntop (&p->prefix), p->prefixlen); |
| 1771 | #endif /* DEBUG */ |
| 1772 | len = 37 - len; |
| 1773 | if (len > 0) |
| 1774 | vty_out (vty, "%*s", len, " "); |
| 1775 | |
| 1776 | len = vty_out (vty, "%s", inet6_ntop (&rinfo->nexthop)); |
| 1777 | |
| 1778 | len = 26 - len; |
| 1779 | if (len > 0) |
| 1780 | vty_out (vty, "%*s", len, " "); |
| 1781 | |
| 1782 | vty_out (vty, "%2d %2d %3d ", |
| 1783 | rinfo->ifindex, rinfo->metric, rinfo->tag); |
| 1784 | |
| 1785 | if (rinfo->sub_type == RIPNG_ROUTE_RTE) |
| 1786 | ripng_vty_out_uptime (vty, rinfo); |
| 1787 | |
| 1788 | vty_out (vty, "%s", VTY_NEWLINE); |
| 1789 | } |
| 1790 | } |
| 1791 | |
| 1792 | return CMD_SUCCESS; |
| 1793 | } |
| 1794 | |
| 1795 | DEFUN (router_ripng, |
| 1796 | router_ripng_cmd, |
| 1797 | "router ripng", |
| 1798 | "Enable a routing process\n" |
| 1799 | "Make RIPng instance command\n") |
| 1800 | { |
| 1801 | int ret; |
| 1802 | |
| 1803 | vty->node = RIPNG_NODE; |
| 1804 | |
| 1805 | if (!ripng) |
| 1806 | { |
| 1807 | ret = ripng_create (); |
| 1808 | |
| 1809 | /* Notice to user we couldn't create RIPng. */ |
| 1810 | if (ret < 0) |
| 1811 | { |
| 1812 | zlog_warn ("can't create RIPng"); |
| 1813 | return CMD_WARNING; |
| 1814 | } |
| 1815 | } |
| 1816 | |
| 1817 | return CMD_SUCCESS; |
| 1818 | } |
| 1819 | |
| 1820 | DEFUN (ripng_route, |
| 1821 | ripng_route_cmd, |
| 1822 | "route IPV6ADDR", |
| 1823 | "Static route setup\n" |
| 1824 | "Set static RIPng route announcement\n") |
| 1825 | { |
| 1826 | int ret; |
| 1827 | struct prefix_ipv6 p; |
| 1828 | struct route_node *rp; |
| 1829 | |
| 1830 | ret = str2prefix_ipv6 (argv[0], (struct prefix_ipv6 *)&p); |
| 1831 | if (ret <= 0) |
| 1832 | { |
| 1833 | vty_out (vty, "Malformed address%s", VTY_NEWLINE); |
| 1834 | return CMD_WARNING; |
| 1835 | } |
| 1836 | apply_mask_ipv6 (&p); |
| 1837 | |
| 1838 | rp = route_node_get (ripng->route, (struct prefix *) &p); |
| 1839 | if (rp->info) |
| 1840 | { |
| 1841 | vty_out (vty, "There is already same static route.%s", VTY_NEWLINE); |
| 1842 | route_unlock_node (rp); |
| 1843 | return CMD_WARNING; |
| 1844 | } |
| 1845 | rp->info = (void *)1; |
| 1846 | |
| 1847 | ripng_redistribute_add (ZEBRA_ROUTE_RIPNG, RIPNG_ROUTE_STATIC, &p, 0); |
| 1848 | |
| 1849 | return CMD_SUCCESS; |
| 1850 | } |
| 1851 | |
| 1852 | DEFUN (no_ripng_route, |
| 1853 | no_ripng_route_cmd, |
| 1854 | "no route IPV6ADDR", |
| 1855 | NO_STR |
| 1856 | "Static route setup\n" |
| 1857 | "Delete static RIPng route announcement\n") |
| 1858 | { |
| 1859 | int ret; |
| 1860 | struct prefix_ipv6 p; |
| 1861 | struct route_node *rp; |
| 1862 | |
| 1863 | ret = str2prefix_ipv6 (argv[0], (struct prefix_ipv6 *)&p); |
| 1864 | if (ret <= 0) |
| 1865 | { |
| 1866 | vty_out (vty, "Malformed address%s", VTY_NEWLINE); |
| 1867 | return CMD_WARNING; |
| 1868 | } |
| 1869 | apply_mask_ipv6 (&p); |
| 1870 | |
| 1871 | rp = route_node_lookup (ripng->route, (struct prefix *) &p); |
| 1872 | if (! rp) |
| 1873 | { |
| 1874 | vty_out (vty, "Can't find static route.%s", VTY_NEWLINE); |
| 1875 | return CMD_WARNING; |
| 1876 | } |
| 1877 | |
| 1878 | ripng_redistribute_delete (ZEBRA_ROUTE_RIPNG, RIPNG_ROUTE_STATIC, &p, 0); |
| 1879 | route_unlock_node (rp); |
| 1880 | |
| 1881 | rp->info = NULL; |
| 1882 | route_unlock_node (rp); |
| 1883 | |
| 1884 | return CMD_SUCCESS; |
| 1885 | } |
| 1886 | |
| 1887 | DEFUN (ripng_aggregate_address, |
| 1888 | ripng_aggregate_address_cmd, |
| 1889 | "aggregate-address X:X::X:X/M", |
| 1890 | "Set aggregate RIPng route announcement\n" |
| 1891 | "Aggregate network\n") |
| 1892 | { |
| 1893 | int ret; |
| 1894 | struct prefix p; |
| 1895 | struct route_node *node; |
| 1896 | |
| 1897 | ret = str2prefix_ipv6 (argv[0], (struct prefix_ipv6 *)&p); |
| 1898 | if (ret <= 0) |
| 1899 | { |
| 1900 | vty_out (vty, "Malformed address%s", VTY_NEWLINE); |
| 1901 | return CMD_WARNING; |
| 1902 | } |
| 1903 | |
| 1904 | /* Check aggregate alredy exist or not. */ |
| 1905 | node = route_node_get (ripng->aggregate, &p); |
| 1906 | if (node->info) |
| 1907 | { |
| 1908 | vty_out (vty, "There is already same aggregate route.%s", VTY_NEWLINE); |
| 1909 | route_unlock_node (node); |
| 1910 | return CMD_WARNING; |
| 1911 | } |
| 1912 | node->info = (void *)1; |
| 1913 | |
| 1914 | ripng_aggregate_add (&p); |
| 1915 | |
| 1916 | return CMD_SUCCESS; |
| 1917 | } |
| 1918 | |
| 1919 | DEFUN (no_ripng_aggregate_address, |
| 1920 | no_ripng_aggregate_address_cmd, |
| 1921 | "no aggregate-address X:X::X:X/M", |
| 1922 | NO_STR |
| 1923 | "Delete aggregate RIPng route announcement\n" |
| 1924 | "Aggregate network") |
| 1925 | { |
| 1926 | int ret; |
| 1927 | struct prefix p; |
| 1928 | struct route_node *rn; |
| 1929 | |
| 1930 | ret = str2prefix_ipv6 (argv[0], (struct prefix_ipv6 *) &p); |
| 1931 | if (ret <= 0) |
| 1932 | { |
| 1933 | vty_out (vty, "Malformed address%s", VTY_NEWLINE); |
| 1934 | return CMD_WARNING; |
| 1935 | } |
| 1936 | |
| 1937 | rn = route_node_lookup (ripng->aggregate, &p); |
| 1938 | if (! rn) |
| 1939 | { |
| 1940 | vty_out (vty, "Can't find aggregate route.%s", VTY_NEWLINE); |
| 1941 | return CMD_WARNING; |
| 1942 | } |
| 1943 | route_unlock_node (rn); |
| 1944 | rn->info = NULL; |
| 1945 | route_unlock_node (rn); |
| 1946 | |
| 1947 | ripng_aggregate_delete (&p); |
| 1948 | |
| 1949 | return CMD_SUCCESS; |
| 1950 | } |
| 1951 | |
| 1952 | DEFUN (ripng_default_metric, |
| 1953 | ripng_default_metric_cmd, |
| 1954 | "default-metric <1-16>", |
| 1955 | "Set a metric of redistribute routes\n" |
| 1956 | "Default metric\n") |
| 1957 | { |
| 1958 | if (ripng) |
| 1959 | { |
| 1960 | ripng->default_metric = atoi (argv[0]); |
| 1961 | } |
| 1962 | return CMD_SUCCESS; |
| 1963 | } |
| 1964 | |
| 1965 | DEFUN (no_ripng_default_metric, |
| 1966 | no_ripng_default_metric_cmd, |
| 1967 | "no default-metric", |
| 1968 | NO_STR |
| 1969 | "Set a metric of redistribute routes\n" |
| 1970 | "Default metric\n") |
| 1971 | { |
| 1972 | if (ripng) |
| 1973 | { |
| 1974 | ripng->default_metric = RIPNG_DEFAULT_METRIC_DEFAULT; |
| 1975 | } |
| 1976 | return CMD_SUCCESS; |
| 1977 | } |
| 1978 | |
| 1979 | ALIAS (no_ripng_default_metric, |
| 1980 | no_ripng_default_metric_val_cmd, |
| 1981 | "no default-metric <1-16>", |
| 1982 | NO_STR |
| 1983 | "Set a metric of redistribute routes\n" |
| 1984 | "Default metric\n") |
| 1985 | |
| 1986 | #if 0 |
| 1987 | /* RIPng update timer setup. */ |
| 1988 | DEFUN (ripng_update_timer, |
| 1989 | ripng_update_timer_cmd, |
| 1990 | "update-timer SECOND", |
| 1991 | "Set RIPng update timer in seconds\n" |
| 1992 | "Seconds\n") |
| 1993 | { |
| 1994 | unsigned long update; |
| 1995 | char *endptr = NULL; |
| 1996 | |
| 1997 | update = strtoul (argv[0], &endptr, 10); |
| 1998 | if (update == ULONG_MAX || *endptr != '\0') |
| 1999 | { |
| 2000 | vty_out (vty, "update timer value error%s", VTY_NEWLINE); |
| 2001 | return CMD_WARNING; |
| 2002 | } |
| 2003 | |
| 2004 | ripng->update_time = update; |
| 2005 | |
| 2006 | ripng_event (RIPNG_UPDATE_EVENT, 0); |
| 2007 | return CMD_SUCCESS; |
| 2008 | } |
| 2009 | |
| 2010 | DEFUN (no_ripng_update_timer, |
| 2011 | no_ripng_update_timer_cmd, |
| 2012 | "no update-timer SECOND", |
| 2013 | NO_STR |
| 2014 | "Unset RIPng update timer in seconds\n" |
| 2015 | "Seconds\n") |
| 2016 | { |
| 2017 | ripng->update_time = RIPNG_UPDATE_TIMER_DEFAULT; |
| 2018 | ripng_event (RIPNG_UPDATE_EVENT, 0); |
| 2019 | return CMD_SUCCESS; |
| 2020 | } |
| 2021 | |
| 2022 | /* RIPng timeout timer setup. */ |
| 2023 | DEFUN (ripng_timeout_timer, |
| 2024 | ripng_timeout_timer_cmd, |
| 2025 | "timeout-timer SECOND", |
| 2026 | "Set RIPng timeout timer in seconds\n" |
| 2027 | "Seconds\n") |
| 2028 | { |
| 2029 | unsigned long timeout; |
| 2030 | char *endptr = NULL; |
| 2031 | |
| 2032 | timeout = strtoul (argv[0], &endptr, 10); |
| 2033 | if (timeout == ULONG_MAX || *endptr != '\0') |
| 2034 | { |
| 2035 | vty_out (vty, "timeout timer value error%s", VTY_NEWLINE); |
| 2036 | return CMD_WARNING; |
| 2037 | } |
| 2038 | |
| 2039 | ripng->timeout_time = timeout; |
| 2040 | |
| 2041 | return CMD_SUCCESS; |
| 2042 | } |
| 2043 | |
| 2044 | DEFUN (no_ripng_timeout_timer, |
| 2045 | no_ripng_timeout_timer_cmd, |
| 2046 | "no timeout-timer SECOND", |
| 2047 | NO_STR |
| 2048 | "Unset RIPng timeout timer in seconds\n" |
| 2049 | "Seconds\n") |
| 2050 | { |
| 2051 | ripng->timeout_time = RIPNG_TIMEOUT_TIMER_DEFAULT; |
| 2052 | return CMD_SUCCESS; |
| 2053 | } |
| 2054 | |
| 2055 | /* RIPng garbage timer setup. */ |
| 2056 | DEFUN (ripng_garbage_timer, |
| 2057 | ripng_garbage_timer_cmd, |
| 2058 | "garbage-timer SECOND", |
| 2059 | "Set RIPng garbage timer in seconds\n" |
| 2060 | "Seconds\n") |
| 2061 | { |
| 2062 | unsigned long garbage; |
| 2063 | char *endptr = NULL; |
| 2064 | |
| 2065 | garbage = strtoul (argv[0], &endptr, 10); |
| 2066 | if (garbage == ULONG_MAX || *endptr != '\0') |
| 2067 | { |
| 2068 | vty_out (vty, "garbage timer value error%s", VTY_NEWLINE); |
| 2069 | return CMD_WARNING; |
| 2070 | } |
| 2071 | |
| 2072 | ripng->garbage_time = garbage; |
| 2073 | |
| 2074 | return CMD_SUCCESS; |
| 2075 | } |
| 2076 | |
| 2077 | DEFUN (no_ripng_garbage_timer, |
| 2078 | no_ripng_garbage_timer_cmd, |
| 2079 | "no garbage-timer SECOND", |
| 2080 | NO_STR |
| 2081 | "Unset RIPng garbage timer in seconds\n" |
| 2082 | "Seconds\n") |
| 2083 | { |
| 2084 | ripng->garbage_time = RIPNG_GARBAGE_TIMER_DEFAULT; |
| 2085 | return CMD_SUCCESS; |
| 2086 | } |
| 2087 | #endif /* 0 */ |
| 2088 | |
| 2089 | DEFUN (ripng_timers, |
| 2090 | ripng_timers_cmd, |
| 2091 | "timers basic <0-65535> <0-65535> <0-65535>", |
| 2092 | "RIPng timers setup\n" |
| 2093 | "Basic timer\n" |
| 2094 | "Routing table update timer value in second. Default is 30.\n" |
| 2095 | "Routing information timeout timer. Default is 180.\n" |
| 2096 | "Garbage collection timer. Default is 120.\n") |
| 2097 | { |
| 2098 | unsigned long update; |
| 2099 | unsigned long timeout; |
| 2100 | unsigned long garbage; |
| 2101 | char *endptr = NULL; |
| 2102 | |
| 2103 | update = strtoul (argv[0], &endptr, 10); |
| 2104 | if (update == ULONG_MAX || *endptr != '\0') |
| 2105 | { |
| 2106 | vty_out (vty, "update timer value error%s", VTY_NEWLINE); |
| 2107 | return CMD_WARNING; |
| 2108 | } |
| 2109 | |
| 2110 | timeout = strtoul (argv[1], &endptr, 10); |
| 2111 | if (timeout == ULONG_MAX || *endptr != '\0') |
| 2112 | { |
| 2113 | vty_out (vty, "timeout timer value error%s", VTY_NEWLINE); |
| 2114 | return CMD_WARNING; |
| 2115 | } |
| 2116 | |
| 2117 | garbage = strtoul (argv[2], &endptr, 10); |
| 2118 | if (garbage == ULONG_MAX || *endptr != '\0') |
| 2119 | { |
| 2120 | vty_out (vty, "garbage timer value error%s", VTY_NEWLINE); |
| 2121 | return CMD_WARNING; |
| 2122 | } |
| 2123 | |
| 2124 | /* Set each timer value. */ |
| 2125 | ripng->update_time = update; |
| 2126 | ripng->timeout_time = timeout; |
| 2127 | ripng->garbage_time = garbage; |
| 2128 | |
| 2129 | /* Reset update timer thread. */ |
| 2130 | ripng_event (RIPNG_UPDATE_EVENT, 0); |
| 2131 | |
| 2132 | return CMD_SUCCESS; |
| 2133 | } |
| 2134 | |
| 2135 | DEFUN (no_ripng_timers, |
| 2136 | no_ripng_timers_cmd, |
| 2137 | "no timers basic", |
| 2138 | NO_STR |
| 2139 | "RIPng timers setup\n" |
| 2140 | "Basic timer\n") |
| 2141 | { |
| 2142 | /* Set each timer value to the default. */ |
| 2143 | ripng->update_time = RIPNG_UPDATE_TIMER_DEFAULT; |
| 2144 | ripng->timeout_time = RIPNG_TIMEOUT_TIMER_DEFAULT; |
| 2145 | ripng->garbage_time = RIPNG_GARBAGE_TIMER_DEFAULT; |
| 2146 | |
| 2147 | /* Reset update timer thread. */ |
| 2148 | ripng_event (RIPNG_UPDATE_EVENT, 0); |
| 2149 | |
| 2150 | return CMD_SUCCESS; |
| 2151 | } |
| 2152 | |
| 2153 | |
| 2154 | DEFUN (show_ipv6_protocols, show_ipv6_protocols_cmd, |
| 2155 | "show ipv6 protocols", |
| 2156 | SHOW_STR |
| 2157 | IP_STR |
| 2158 | "Routing protocol information") |
| 2159 | { |
| 2160 | if (! ripng) |
| 2161 | return CMD_SUCCESS; |
| 2162 | |
| 2163 | vty_out (vty, "Routing Protocol is \"ripng\"%s", VTY_NEWLINE); |
| 2164 | |
| 2165 | vty_out (vty, "Sending updates every %ld seconds, next due in %d seconds%s", |
| 2166 | ripng->update_time, 0, |
| 2167 | VTY_NEWLINE); |
| 2168 | |
| 2169 | vty_out (vty, "Timerout after %ld seconds, garbage correct %ld%s", |
| 2170 | ripng->timeout_time, |
| 2171 | ripng->garbage_time, |
| 2172 | VTY_NEWLINE); |
| 2173 | |
| 2174 | vty_out (vty, "Outgoing update filter list for all interfaces is not set"); |
| 2175 | vty_out (vty, "Incoming update filter list for all interfaces is not set"); |
| 2176 | |
| 2177 | return CMD_SUCCESS; |
| 2178 | } |
| 2179 | |
| 2180 | /* Please be carefull to use this command. */ |
paul | a2c6283 | 2003-04-23 17:01:31 +0000 | [diff] [blame] | 2181 | DEFUN (ripng_default_information_originate, |
| 2182 | ripng_default_information_originate_cmd, |
paul | 718e374 | 2002-12-13 20:15:29 +0000 | [diff] [blame] | 2183 | "default-information originate", |
| 2184 | "Default route information\n" |
| 2185 | "Distribute default route\n") |
| 2186 | { |
| 2187 | struct prefix_ipv6 p; |
| 2188 | |
| 2189 | ripng->default_information = 1; |
| 2190 | |
| 2191 | str2prefix_ipv6 ("::/0", &p); |
| 2192 | ripng_redistribute_add (ZEBRA_ROUTE_RIPNG, RIPNG_ROUTE_STATIC, &p, 0); |
| 2193 | |
| 2194 | return CMD_SUCCESS; |
| 2195 | } |
| 2196 | |
paul | a2c6283 | 2003-04-23 17:01:31 +0000 | [diff] [blame] | 2197 | DEFUN (no_ripng_default_information_originate, |
| 2198 | no_ripng_default_information_originate_cmd, |
paul | 718e374 | 2002-12-13 20:15:29 +0000 | [diff] [blame] | 2199 | "no default-information originate", |
| 2200 | NO_STR |
| 2201 | "Default route information\n" |
| 2202 | "Distribute default route\n") |
| 2203 | { |
| 2204 | struct prefix_ipv6 p; |
| 2205 | |
| 2206 | ripng->default_information = 0; |
| 2207 | |
| 2208 | str2prefix_ipv6 ("::/0", &p); |
| 2209 | ripng_redistribute_delete (ZEBRA_ROUTE_RIPNG, RIPNG_ROUTE_STATIC, &p, 0); |
| 2210 | |
| 2211 | return CMD_SUCCESS; |
| 2212 | } |
| 2213 | |
| 2214 | /* RIPng configuration write function. */ |
| 2215 | int |
| 2216 | ripng_config_write (struct vty *vty) |
| 2217 | { |
| 2218 | int ripng_network_write (struct vty *); |
| 2219 | void ripng_redistribute_write (struct vty *); |
| 2220 | int write = 0; |
| 2221 | struct route_node *rp; |
| 2222 | |
| 2223 | if (ripng) |
| 2224 | { |
| 2225 | |
| 2226 | /* RIPng router. */ |
| 2227 | vty_out (vty, "router ripng%s", VTY_NEWLINE); |
| 2228 | |
| 2229 | if (ripng->default_information) |
| 2230 | vty_out (vty, " default-information originate%s", VTY_NEWLINE); |
| 2231 | |
| 2232 | ripng_network_write (vty); |
| 2233 | |
| 2234 | /* RIPng default metric configuration */ |
| 2235 | if (ripng->default_metric != RIPNG_DEFAULT_METRIC_DEFAULT) |
| 2236 | vty_out (vty, " default-metric %d%s", |
| 2237 | ripng->default_metric, VTY_NEWLINE); |
| 2238 | |
| 2239 | ripng_redistribute_write (vty); |
| 2240 | |
| 2241 | /* RIPng aggregate routes. */ |
| 2242 | for (rp = route_top (ripng->aggregate); rp; rp = route_next (rp)) |
| 2243 | if (rp->info != NULL) |
| 2244 | vty_out (vty, " aggregate-address %s/%d%s", |
| 2245 | inet6_ntop (&rp->p.u.prefix6), |
| 2246 | rp->p.prefixlen, |
| 2247 | |
| 2248 | VTY_NEWLINE); |
| 2249 | |
| 2250 | /* RIPng static routes. */ |
| 2251 | for (rp = route_top (ripng->route); rp; rp = route_next (rp)) |
| 2252 | if (rp->info != NULL) |
| 2253 | vty_out (vty, " route %s/%d%s", inet6_ntop (&rp->p.u.prefix6), |
| 2254 | rp->p.prefixlen, |
| 2255 | VTY_NEWLINE); |
| 2256 | |
| 2257 | /* RIPng timers configuration. */ |
| 2258 | if (ripng->update_time != RIPNG_UPDATE_TIMER_DEFAULT || |
| 2259 | ripng->timeout_time != RIPNG_TIMEOUT_TIMER_DEFAULT || |
| 2260 | ripng->garbage_time != RIPNG_GARBAGE_TIMER_DEFAULT) |
| 2261 | { |
| 2262 | vty_out (vty, " timers basic %ld %ld %ld%s", |
| 2263 | ripng->update_time, |
| 2264 | ripng->timeout_time, |
| 2265 | ripng->garbage_time, |
| 2266 | VTY_NEWLINE); |
| 2267 | } |
| 2268 | #if 0 |
| 2269 | if (ripng->update_time != RIPNG_UPDATE_TIMER_DEFAULT) |
| 2270 | vty_out (vty, " update-timer %d%s", ripng->update_time, |
| 2271 | VTY_NEWLINE); |
| 2272 | if (ripng->timeout_time != RIPNG_TIMEOUT_TIMER_DEFAULT) |
| 2273 | vty_out (vty, " timeout-timer %d%s", ripng->timeout_time, |
| 2274 | VTY_NEWLINE); |
| 2275 | if (ripng->garbage_time != RIPNG_GARBAGE_TIMER_DEFAULT) |
| 2276 | vty_out (vty, " garbage-timer %d%s", ripng->garbage_time, |
| 2277 | VTY_NEWLINE); |
| 2278 | #endif /* 0 */ |
| 2279 | |
| 2280 | write += config_write_distribute (vty); |
| 2281 | |
| 2282 | write += config_write_if_rmap (vty); |
| 2283 | |
| 2284 | write++; |
| 2285 | } |
| 2286 | return write; |
| 2287 | } |
| 2288 | |
| 2289 | /* RIPng node structure. */ |
| 2290 | struct cmd_node cmd_ripng_node = |
| 2291 | { |
| 2292 | RIPNG_NODE, |
| 2293 | "%s(config-router)# ", |
| 2294 | 1, |
| 2295 | }; |
| 2296 | |
| 2297 | void |
| 2298 | ripng_distribute_update (struct distribute *dist) |
| 2299 | { |
| 2300 | struct interface *ifp; |
| 2301 | struct ripng_interface *ri; |
| 2302 | struct access_list *alist; |
| 2303 | struct prefix_list *plist; |
| 2304 | |
| 2305 | if (! dist->ifname) |
| 2306 | return; |
| 2307 | |
| 2308 | ifp = if_lookup_by_name (dist->ifname); |
| 2309 | if (ifp == NULL) |
| 2310 | return; |
| 2311 | |
| 2312 | ri = ifp->info; |
| 2313 | |
| 2314 | if (dist->list[DISTRIBUTE_IN]) |
| 2315 | { |
| 2316 | alist = access_list_lookup (AFI_IP6, dist->list[DISTRIBUTE_IN]); |
| 2317 | if (alist) |
| 2318 | ri->list[RIPNG_FILTER_IN] = alist; |
| 2319 | else |
| 2320 | ri->list[RIPNG_FILTER_IN] = NULL; |
| 2321 | } |
| 2322 | else |
| 2323 | ri->list[RIPNG_FILTER_IN] = NULL; |
| 2324 | |
| 2325 | if (dist->list[DISTRIBUTE_OUT]) |
| 2326 | { |
| 2327 | alist = access_list_lookup (AFI_IP6, dist->list[DISTRIBUTE_OUT]); |
| 2328 | if (alist) |
| 2329 | ri->list[RIPNG_FILTER_OUT] = alist; |
| 2330 | else |
| 2331 | ri->list[RIPNG_FILTER_OUT] = NULL; |
| 2332 | } |
| 2333 | else |
| 2334 | ri->list[RIPNG_FILTER_OUT] = NULL; |
| 2335 | |
| 2336 | if (dist->prefix[DISTRIBUTE_IN]) |
| 2337 | { |
| 2338 | plist = prefix_list_lookup (AFI_IP6, dist->prefix[DISTRIBUTE_IN]); |
| 2339 | if (plist) |
| 2340 | ri->prefix[RIPNG_FILTER_IN] = plist; |
| 2341 | else |
| 2342 | ri->prefix[RIPNG_FILTER_IN] = NULL; |
| 2343 | } |
| 2344 | else |
| 2345 | ri->prefix[RIPNG_FILTER_IN] = NULL; |
| 2346 | |
| 2347 | if (dist->prefix[DISTRIBUTE_OUT]) |
| 2348 | { |
| 2349 | plist = prefix_list_lookup (AFI_IP6, dist->prefix[DISTRIBUTE_OUT]); |
| 2350 | if (plist) |
| 2351 | ri->prefix[RIPNG_FILTER_OUT] = plist; |
| 2352 | else |
| 2353 | ri->prefix[RIPNG_FILTER_OUT] = NULL; |
| 2354 | } |
| 2355 | else |
| 2356 | ri->prefix[RIPNG_FILTER_OUT] = NULL; |
| 2357 | } |
| 2358 | void |
| 2359 | ripng_distribute_update_interface (struct interface *ifp) |
| 2360 | { |
| 2361 | struct distribute *dist; |
| 2362 | |
| 2363 | dist = distribute_lookup (ifp->name); |
| 2364 | if (dist) |
| 2365 | ripng_distribute_update (dist); |
| 2366 | } |
| 2367 | |
| 2368 | /* Update all interface's distribute list. */ |
| 2369 | void |
| 2370 | ripng_distribute_update_all () |
| 2371 | { |
| 2372 | struct interface *ifp; |
| 2373 | listnode node; |
| 2374 | |
| 2375 | for (node = listhead (iflist); node; nextnode (node)) |
| 2376 | { |
| 2377 | ifp = getdata (node); |
| 2378 | ripng_distribute_update_interface (ifp); |
| 2379 | } |
| 2380 | } |
| 2381 | |
| 2382 | void |
| 2383 | ripng_if_rmap_update (struct if_rmap *if_rmap) |
| 2384 | { |
| 2385 | struct interface *ifp; |
| 2386 | struct ripng_interface *ri; |
| 2387 | struct route_map *rmap; |
| 2388 | |
| 2389 | ifp = if_lookup_by_name (if_rmap->ifname); |
| 2390 | if (ifp == NULL) |
| 2391 | return; |
| 2392 | |
| 2393 | ri = ifp->info; |
| 2394 | |
| 2395 | if (if_rmap->routemap[IF_RMAP_IN]) |
| 2396 | { |
| 2397 | rmap = route_map_lookup_by_name (if_rmap->routemap[IF_RMAP_IN]); |
| 2398 | if (rmap) |
| 2399 | ri->routemap[IF_RMAP_IN] = rmap; |
| 2400 | else |
| 2401 | ri->routemap[IF_RMAP_IN] = NULL; |
| 2402 | } |
| 2403 | else |
| 2404 | ri->routemap[RIPNG_FILTER_IN] = NULL; |
| 2405 | |
| 2406 | if (if_rmap->routemap[IF_RMAP_OUT]) |
| 2407 | { |
| 2408 | rmap = route_map_lookup_by_name (if_rmap->routemap[IF_RMAP_OUT]); |
| 2409 | if (rmap) |
| 2410 | ri->routemap[IF_RMAP_OUT] = rmap; |
| 2411 | else |
| 2412 | ri->routemap[IF_RMAP_OUT] = NULL; |
| 2413 | } |
| 2414 | else |
| 2415 | ri->routemap[RIPNG_FILTER_OUT] = NULL; |
| 2416 | } |
| 2417 | |
| 2418 | void |
| 2419 | ripng_if_rmap_update_interface (struct interface *ifp) |
| 2420 | { |
| 2421 | struct if_rmap *if_rmap; |
| 2422 | |
| 2423 | if_rmap = if_rmap_lookup (ifp->name); |
| 2424 | if (if_rmap) |
| 2425 | ripng_if_rmap_update (if_rmap); |
| 2426 | } |
| 2427 | |
| 2428 | void |
| 2429 | ripng_routemap_update_redistribute (void) |
| 2430 | { |
| 2431 | int i; |
| 2432 | |
| 2433 | if (ripng) |
| 2434 | { |
| 2435 | for (i = 0; i < ZEBRA_ROUTE_MAX; i++) |
| 2436 | { |
| 2437 | if (ripng->route_map[i].name) |
| 2438 | ripng->route_map[i].map = |
| 2439 | route_map_lookup_by_name (ripng->route_map[i].name); |
| 2440 | } |
| 2441 | } |
| 2442 | } |
| 2443 | |
| 2444 | void |
| 2445 | ripng_routemap_update () |
| 2446 | { |
| 2447 | struct interface *ifp; |
| 2448 | listnode node; |
| 2449 | |
| 2450 | for (node = listhead (iflist); node; nextnode (node)) |
| 2451 | { |
| 2452 | ifp = getdata (node); |
| 2453 | ripng_if_rmap_update_interface (ifp); |
| 2454 | } |
| 2455 | |
| 2456 | ripng_routemap_update_redistribute (); |
| 2457 | } |
| 2458 | |
| 2459 | /* Initialize ripng structure and set commands. */ |
| 2460 | void |
| 2461 | ripng_init () |
| 2462 | { |
| 2463 | /* Randomize. */ |
| 2464 | srand (time (NULL)); |
| 2465 | |
| 2466 | /* Install RIPNG_NODE. */ |
| 2467 | install_node (&cmd_ripng_node, ripng_config_write); |
| 2468 | |
| 2469 | /* Install ripng commands. */ |
| 2470 | install_element (VIEW_NODE, &show_ipv6_ripng_cmd); |
| 2471 | |
| 2472 | install_element (ENABLE_NODE, &show_ipv6_ripng_cmd); |
| 2473 | |
| 2474 | install_element (CONFIG_NODE, &router_ripng_cmd); |
| 2475 | |
| 2476 | install_default (RIPNG_NODE); |
| 2477 | install_element (RIPNG_NODE, &ripng_route_cmd); |
| 2478 | install_element (RIPNG_NODE, &no_ripng_route_cmd); |
| 2479 | install_element (RIPNG_NODE, &ripng_aggregate_address_cmd); |
| 2480 | install_element (RIPNG_NODE, &no_ripng_aggregate_address_cmd); |
| 2481 | |
| 2482 | install_element (RIPNG_NODE, &ripng_default_metric_cmd); |
| 2483 | install_element (RIPNG_NODE, &no_ripng_default_metric_cmd); |
| 2484 | install_element (RIPNG_NODE, &no_ripng_default_metric_val_cmd); |
| 2485 | |
| 2486 | install_element (RIPNG_NODE, &ripng_timers_cmd); |
| 2487 | install_element (RIPNG_NODE, &no_ripng_timers_cmd); |
| 2488 | #if 0 |
| 2489 | install_element (RIPNG_NODE, &ripng_update_timer_cmd); |
| 2490 | install_element (RIPNG_NODE, &no_ripng_update_timer_cmd); |
| 2491 | install_element (RIPNG_NODE, &ripng_timeout_timer_cmd); |
| 2492 | install_element (RIPNG_NODE, &no_ripng_timeout_timer_cmd); |
| 2493 | install_element (RIPNG_NODE, &ripng_garbage_timer_cmd); |
| 2494 | install_element (RIPNG_NODE, &no_ripng_garbage_timer_cmd); |
| 2495 | #endif /* 0 */ |
| 2496 | |
paul | a2c6283 | 2003-04-23 17:01:31 +0000 | [diff] [blame] | 2497 | install_element (RIPNG_NODE, &ripng_default_information_originate_cmd); |
| 2498 | install_element (RIPNG_NODE, &no_ripng_default_information_originate_cmd); |
paul | 718e374 | 2002-12-13 20:15:29 +0000 | [diff] [blame] | 2499 | |
| 2500 | ripng_if_init (); |
| 2501 | ripng_debug_init (); |
| 2502 | |
| 2503 | /* Access list install. */ |
| 2504 | access_list_init (); |
| 2505 | access_list_add_hook (ripng_distribute_update_all); |
| 2506 | access_list_delete_hook (ripng_distribute_update_all); |
| 2507 | |
| 2508 | /* Prefix list initialize.*/ |
| 2509 | prefix_list_init (); |
| 2510 | prefix_list_add_hook (ripng_distribute_update_all); |
| 2511 | prefix_list_delete_hook (ripng_distribute_update_all); |
| 2512 | |
| 2513 | /* Distribute list install. */ |
| 2514 | distribute_list_init (RIPNG_NODE); |
| 2515 | distribute_list_add_hook (ripng_distribute_update); |
| 2516 | distribute_list_delete_hook (ripng_distribute_update); |
| 2517 | |
| 2518 | /* Route-map for interface. */ |
| 2519 | ripng_route_map_init (); |
| 2520 | route_map_add_hook (ripng_routemap_update); |
| 2521 | route_map_delete_hook (ripng_routemap_update); |
| 2522 | |
paul | 41ce926 | 2003-04-19 15:54:03 +0000 | [diff] [blame] | 2523 | if_rmap_init (); |
paul | 718e374 | 2002-12-13 20:15:29 +0000 | [diff] [blame] | 2524 | if_rmap_hook_add (ripng_if_rmap_update); |
| 2525 | if_rmap_hook_delete (ripng_if_rmap_update); |
| 2526 | } |