diff --git a/config-models/aether-1.x/files/aether-1.0.0.tree b/config-models/aether-1.x/files/aether-1.0.0.tree
new file mode 100644
index 0000000..7c24828
--- /dev/null
+++ b/config-models/aether-1.x/files/aether-1.0.0.tree
@@ -0,0 +1,54 @@
+module: access-profile
+  +--rw access-profile
+     +--rw access-profile* [id]
+        +--rw id             access-profile-id
+        +--rw type?          string
+        +--rw filter?        string
+        +--rw description?   string
+
+module: aether-subscriber
+  +--rw subscriber
+     +--rw ue* [ueid]
+        +--rw ueid             ueid
+        +--rw serving-plmn
+        |  +--rw mcc?   mcc
+        |  +--rw mnc?   mnc
+        |  +--rw tac?   tac
+        +--rw requested-apn?   string
+        +--rw priority?        uint32
+        +--rw enabled?         boolean
+        +--rw profiles
+           +--rw apn-profile?      -> /apn:apn-profile/apn-profile/id
+           +--rw up-profile?       -> /up:up-profile/up-profile/id
+           +--rw qos-profile?      -> /qos:qos-profile/qos-profile/id
+           +--rw access-profile* [access-profile]
+              +--rw access-profile    -> /ap:access-profile/access-profile/id
+              +--rw allowed?          boolean
+
+module: apn-profile
+  +--rw apn-profile
+     +--rw apn-profile* [id]
+        +--rw id               apn-profile-id
+        +--rw apn-name?        string
+        +--rw dns-primary?     inet:ip-address
+        +--rw dns-secondary?   inet:ip-address
+        +--rw mtu?             uint32
+        +--rw gx-enabled?      boolean
+        +--rw description?     string
+
+module: qos-profile
+  +--rw qos-profile
+     +--rw qos-profile* [id]
+        +--rw id             qos-profile-id
+        +--rw apn-ambr
+        |  +--rw uplink?     uint32
+        |  +--rw downlink?   uint32
+        +--rw description?   string
+
+module: up-profile
+  +--rw up-profile
+     +--rw up-profile* [id]
+        +--rw id                up-profile-id
+        +--rw user-plane?       string
+        +--rw access-control?   string
+        +--rw description?      string
diff --git a/config-models/aether-1.x/files/yang/access-profile.yang b/config-models/aether-1.x/files/yang/access-profile.yang
new file mode 100755
index 0000000..29e10a1
--- /dev/null
+++ b/config-models/aether-1.x/files/yang/access-profile.yang
@@ -0,0 +1,64 @@
+// SPDX-FileCopyrightText: 2021 Open Networking Foundation
+//
+// SPDX-License-Identifier: LicenseRef-ONF-Member-Only-1.0
+
+module access-profile {
+  namespace "http://opennetworking.org/aether/access-profile";
+  prefix pro;
+
+  organization "Open Networking Foundation.";
+  contact "Scott Baker";
+  description "To generate JSON from this use command
+    pyang -f jtoxx test1.yang | python3 -m json.tool > test1.json
+    Copied from YangUIComponents project";
+
+  revision "2020-08-18" {
+    description "An Aether access Profile";
+    reference "RFC 6087";
+  }
+
+  // TODO: Think more on whether this should be a UUID or
+  // simply a unique name. If it's a UUID, could fix the 
+  // string length.
+  typedef access-profile-id {
+        type string {
+            length 1..32;
+        }
+  }
+
+  container access-profile {
+    description "The top level container";
+
+    list access-profile {
+      key "id";
+      description
+        "List of access profiles";
+
+      leaf id {
+        type access-profile-id;
+        description "ID for this access profile.";
+      }
+
+      leaf type {
+        type string {
+          length 1..32;
+        }
+        description "type of profile";
+      }
+  
+      leaf filter {
+        type string {
+          length 0..32;
+        }
+        description "filter";
+      }
+
+      leaf description {
+        type string {
+          length 1..100;
+        }
+        description "description of this profile";
+      }
+    }
+  } 
+}
diff --git a/config-models/aether-1.x/files/yang/aether-subscriber.yang b/config-models/aether-1.x/files/yang/aether-subscriber.yang
new file mode 100644
index 0000000..963217f
--- /dev/null
+++ b/config-models/aether-1.x/files/yang/aether-subscriber.yang
@@ -0,0 +1,147 @@
+// SPDX-FileCopyrightText: 2021 Open Networking Foundation
+//
+// SPDX-License-Identifier: LicenseRef-ONF-Member-Only-1.0
+
+module aether-subscriber {
+  namespace "http://opennetworking.org/aether/subscriber";
+  prefix sub;
+
+  import apn-profile{ prefix apn; }
+  import qos-profile{ prefix qos; }
+  import up-profile{ prefix up; }
+  import access-profile{ prefix ap; }
+
+  organization "Open Networking Foundation.";
+  contact "Scott Baker";
+  description "To generate JSON from this use command
+    pyang -f jtoxx test1.yang | python3 -m json.tool > test1.json
+    Copied from YangUIComponents project";
+
+  revision "2020-08-18" {
+    description "An Aether Subscriber";
+    reference "RFC 6087";
+  }
+
+  // User Equipment ID (UEID), Basically an IMSI range
+  // examples:
+  //    123456789???????  ... wildcard at the end
+  //    123456???0123455  ... wildcard in the middle
+  //    1234567890000000-123456789000005 ... range
+  typedef ueid {
+      type string {
+          length 1..31;
+      }
+  }
+
+  typedef mcc {
+      type uint32 {
+        range 0..999;
+      }
+  }
+
+  typedef mnc {
+      type uint32 {
+        range 0..999;
+      }
+  }
+
+  typedef tac {
+      type uint32 {
+        range 0..99999999;
+      }
+  }
+
+  container subscriber {
+    description "The top level container";
+
+    list ue {
+      key "ueid";
+      description
+        "List of subscriber devices";
+
+      leaf ueid {
+        description "identifier for this subscriber, may or may not be an IMSI";
+        type ueid;
+      }
+
+      container serving-plmn {
+        leaf mcc {
+          type mcc;
+          description "mobile country code";
+        }
+        leaf mnc {
+          type mnc;
+          description "mobile network code";
+        }
+        leaf tac {
+          type tac;
+          description "type allocation code";
+        }
+      }
+
+      leaf requested-apn {
+        type string {
+            length 1..31;
+        }
+        description "requested access point name";
+      }
+
+      leaf priority {
+        type uint32 {
+          range 0..1000;
+        }
+        default 0;
+        description
+          "Priority for this subscriber range";
+      }
+
+      leaf enabled {
+        type boolean;
+        default false;
+        description
+          "Enable or disable this ue";
+      }
+
+      container profiles {
+        leaf apn-profile {
+          type leafref {
+            path "/apn:apn-profile/apn:apn-profile/apn:id";
+          }
+          description
+            "Link to apn profile";
+        }
+        leaf up-profile {
+          type leafref {
+            path "/up:up-profile/up:up-profile/up:id";
+          }          
+          description
+            "Link to user plane profile";
+        }
+        leaf qos-profile {
+          type leafref {
+            path "/qos:qos-profile/qos:qos-profile/qos:id";
+          }              
+          description
+            "Link to qos profile";
+        }
+        list access-profile {
+          key "access-profile";
+          leaf access-profile {
+            type leafref {
+              path "/ap:access-profile/ap:access-profile/ap:id";
+            }            
+//            type ap:access-profile-id;
+            description
+                "Link to access profile";
+          }
+          leaf allowed {
+            type boolean;
+            default true;
+            description
+              "Allow or disallow this ue to use this access profile";
+          }
+        }
+      }
+    }
+  } 
+}
diff --git a/config-models/aether-1.x/files/yang/apn-profile.yang b/config-models/aether-1.x/files/yang/apn-profile.yang
new file mode 100755
index 0000000..20e1763
--- /dev/null
+++ b/config-models/aether-1.x/files/yang/apn-profile.yang
@@ -0,0 +1,84 @@
+// SPDX-FileCopyrightText: 2021 Open Networking Foundation
+//
+// SPDX-License-Identifier: LicenseRef-ONF-Member-Only-1.0
+
+module apn-profile {
+  namespace "http://opennetworking.org/aether/apn-profile";
+  prefix pro;
+
+  import ietf-inet-types { prefix inet; }
+
+  organization "Open Networking Foundation.";
+  contact "Scott Baker";
+  description "To generate JSON from this use command
+    pyang -f jtoxx test1.yang | python3 -m json.tool > test1.json
+    Copied from YangUIComponents project";
+
+  revision "2020-08-18" {
+    description "An Aether APN Profile";
+    reference "RFC 6087";
+  }
+
+  // TODO: Think more on whether this should be a UUID or
+  // simply a unique name. If it's a UUID, could fix the 
+  // string length.
+  typedef apn-profile-id {
+        type string {
+            length 1..32;
+        }
+  }
+
+  container apn-profile {
+    description "The top level container";
+
+    list apn-profile {
+      key "id";
+      description
+        "List of apn profiles";
+
+      leaf id {
+        type apn-profile-id;
+        description "ID for this apn profile.";
+      }
+
+      leaf apn-name {
+        type string {
+          length 1..32;
+        }
+        description "apn name";
+      }
+
+      leaf dns-primary {
+        type inet:ip-address;
+        description "primary dns server name";
+      }
+
+      leaf dns-secondary {
+        type inet:ip-address;
+        description "secondary dns server name";
+      }
+
+      leaf mtu {
+        type uint32 {
+          range 68..65535;
+        }
+        units bytes;
+        default 1460;
+        description "maximum transmission unit";
+      }
+
+      leaf gx-enabled {
+        type boolean;
+        default false;
+        description "enable gx interface";
+      }
+
+      leaf description {
+        type string {
+          length 1..100;
+        }
+        description "description of this profile";
+      }      
+    }
+  } 
+}
diff --git a/config-models/aether-1.x/files/yang/ietf-inet-types.yang b/config-models/aether-1.x/files/yang/ietf-inet-types.yang
new file mode 100644
index 0000000..eacefb6
--- /dev/null
+++ b/config-models/aether-1.x/files/yang/ietf-inet-types.yang
@@ -0,0 +1,458 @@
+module ietf-inet-types {
+
+  namespace "urn:ietf:params:xml:ns:yang:ietf-inet-types";
+  prefix "inet";
+
+  organization
+   "IETF NETMOD (NETCONF Data Modeling Language) Working Group";
+
+  contact
+   "WG Web:   <http://tools.ietf.org/wg/netmod/>
+    WG List:  <mailto:netmod@ietf.org>
+
+    WG Chair: David Kessens
+              <mailto:david.kessens@nsn.com>
+
+    WG Chair: Juergen Schoenwaelder
+              <mailto:j.schoenwaelder@jacobs-university.de>
+
+    Editor:   Juergen Schoenwaelder
+              <mailto:j.schoenwaelder@jacobs-university.de>";
+
+  description
+   "This module contains a collection of generally useful derived
+    YANG data types for Internet addresses and related things.
+
+    Copyright (c) 2013 IETF Trust and the persons identified as
+    authors of the code.  All rights reserved.
+
+    Redistribution and use in source and binary forms, with or
+    without modification, is permitted pursuant to, and subject
+    to the license terms contained in, the Simplified BSD License
+    set forth in Section 4.c of the IETF Trust's Legal Provisions
+    Relating to IETF Documents
+    (http://trustee.ietf.org/license-info).
+
+    This version of this YANG module is part of RFC 6991; see
+    the RFC itself for full legal notices.";
+
+  revision 2013-07-15 {
+    description
+     "This revision adds the following new data types:
+      - ip-address-no-zone
+      - ipv4-address-no-zone
+      - ipv6-address-no-zone";
+    reference
+     "RFC 6991: Common YANG Data Types";
+  }
+
+  revision 2010-09-24 {
+    description
+     "Initial revision.";
+    reference
+     "RFC 6021: Common YANG Data Types";
+  }
+
+  /*** collection of types related to protocol fields ***/
+
+  typedef ip-version {
+    type enumeration {
+      enum unknown {
+        value "0";
+        description
+         "An unknown or unspecified version of the Internet
+          protocol.";
+      }
+      enum ipv4 {
+        value "1";
+        description
+         "The IPv4 protocol as defined in RFC 791.";
+      }
+      enum ipv6 {
+        value "2";
+        description
+         "The IPv6 protocol as defined in RFC 2460.";
+      }
+    }
+    description
+     "This value represents the version of the IP protocol.
+
+      In the value set and its semantics, this type is equivalent
+      to the InetVersion textual convention of the SMIv2.";
+    reference
+     "RFC  791: Internet Protocol
+      RFC 2460: Internet Protocol, Version 6 (IPv6) Specification
+      RFC 4001: Textual Conventions for Internet Network Addresses";
+  }
+
+  typedef dscp {
+    type uint8 {
+      range "0..63";
+    }
+    description
+     "The dscp type represents a Differentiated Services Code Point
+      that may be used for marking packets in a traffic stream.
+      In the value set and its semantics, this type is equivalent
+      to the Dscp textual convention of the SMIv2.";
+    reference
+     "RFC 3289: Management Information Base for the Differentiated
+                Services Architecture
+      RFC 2474: Definition of the Differentiated Services Field
+                (DS Field) in the IPv4 and IPv6 Headers
+      RFC 2780: IANA Allocation Guidelines For Values In
+                the Internet Protocol and Related Headers";
+  }
+
+  typedef ipv6-flow-label {
+    type uint32 {
+      range "0..1048575";
+    }
+    description
+     "The ipv6-flow-label type represents the flow identifier or Flow
+      Label in an IPv6 packet header that may be used to
+      discriminate traffic flows.
+
+      In the value set and its semantics, this type is equivalent
+      to the IPv6FlowLabel textual convention of the SMIv2.";
+    reference
+     "RFC 3595: Textual Conventions for IPv6 Flow Label
+      RFC 2460: Internet Protocol, Version 6 (IPv6) Specification";
+  }
+
+  typedef port-number {
+    type uint16 {
+      range "0..65535";
+    }
+    description
+     "The port-number type represents a 16-bit port number of an
+      Internet transport-layer protocol such as UDP, TCP, DCCP, or
+      SCTP.  Port numbers are assigned by IANA.  A current list of
+      all assignments is available from <http://www.iana.org/>.
+
+      Note that the port number value zero is reserved by IANA.  In
+      situations where the value zero does not make sense, it can
+      be excluded by subtyping the port-number type.
+      In the value set and its semantics, this type is equivalent
+      to the InetPortNumber textual convention of the SMIv2.";
+    reference
+     "RFC  768: User Datagram Protocol
+      RFC  793: Transmission Control Protocol
+      RFC 4960: Stream Control Transmission Protocol
+      RFC 4340: Datagram Congestion Control Protocol (DCCP)
+      RFC 4001: Textual Conventions for Internet Network Addresses";
+  }
+
+  /*** collection of types related to autonomous systems ***/
+
+  typedef as-number {
+    type uint32;
+    description
+     "The as-number type represents autonomous system numbers
+      which identify an Autonomous System (AS).  An AS is a set
+      of routers under a single technical administration, using
+      an interior gateway protocol and common metrics to route
+      packets within the AS, and using an exterior gateway
+      protocol to route packets to other ASes.  IANA maintains
+      the AS number space and has delegated large parts to the
+      regional registries.
+
+      Autonomous system numbers were originally limited to 16
+      bits.  BGP extensions have enlarged the autonomous system
+      number space to 32 bits.  This type therefore uses an uint32
+      base type without a range restriction in order to support
+      a larger autonomous system number space.
+
+      In the value set and its semantics, this type is equivalent
+      to the InetAutonomousSystemNumber textual convention of
+      the SMIv2.";
+    reference
+     "RFC 1930: Guidelines for creation, selection, and registration
+                of an Autonomous System (AS)
+      RFC 4271: A Border Gateway Protocol 4 (BGP-4)
+      RFC 4001: Textual Conventions for Internet Network Addresses
+      RFC 6793: BGP Support for Four-Octet Autonomous System (AS)
+                Number Space";
+  }
+
+  /*** collection of types related to IP addresses and hostnames ***/
+
+  typedef ip-address {
+    type union {
+      type inet:ipv4-address;
+      type inet:ipv6-address;
+    }
+    description
+     "The ip-address type represents an IP address and is IP
+      version neutral.  The format of the textual representation
+      implies the IP version.  This type supports scoped addresses
+      by allowing zone identifiers in the address format.";
+    reference
+     "RFC 4007: IPv6 Scoped Address Architecture";
+  }
+
+  typedef ipv4-address {
+    type string {
+      pattern
+        '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}'
+      +  '([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])'
+      + '(%[\p{N}\p{L}]+)?';
+    }
+    description
+      "The ipv4-address type represents an IPv4 address in
+       dotted-quad notation.  The IPv4 address may include a zone
+       index, separated by a % sign.
+
+       The zone index is used to disambiguate identical address
+       values.  For link-local addresses, the zone index will
+       typically be the interface index number or the name of an
+       interface.  If the zone index is not present, the default
+       zone of the device will be used.
+
+       The canonical format for the zone index is the numerical
+       format";
+  }
+
+  typedef ipv6-address {
+    type string {
+      pattern '((:|[0-9a-fA-F]{0,4}):)([0-9a-fA-F]{0,4}:){0,5}'
+            + '((([0-9a-fA-F]{0,4}:)?(:|[0-9a-fA-F]{0,4}))|'
+            + '(((25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])\.){3}'
+            + '(25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])))'
+            + '(%[\p{N}\p{L}]+)?';
+      pattern '(([^:]+:){6}(([^:]+:[^:]+)|(.*\..*)))|'
+            + '((([^:]+:)*[^:]+)?::(([^:]+:)*[^:]+)?)'
+            + '(%.+)?';
+    }
+    description
+     "The ipv6-address type represents an IPv6 address in full,
+      mixed, shortened, and shortened-mixed notation.  The IPv6
+      address may include a zone index, separated by a % sign.
+
+      The zone index is used to disambiguate identical address
+      values.  For link-local addresses, the zone index will
+      typically be the interface index number or the name of an
+      interface.  If the zone index is not present, the default
+      zone of the device will be used.
+
+      The canonical format of IPv6 addresses uses the textual
+      representation defined in Section 4 of RFC 5952.  The
+      canonical format for the zone index is the numerical
+      format as described in Section 11.2 of RFC 4007.";
+    reference
+     "RFC 4291: IP Version 6 Addressing Architecture
+      RFC 4007: IPv6 Scoped Address Architecture
+      RFC 5952: A Recommendation for IPv6 Address Text
+                Representation";
+  }
+
+  typedef ip-address-no-zone {
+    type union {
+      type inet:ipv4-address-no-zone;
+      type inet:ipv6-address-no-zone;
+    }
+    description
+     "The ip-address-no-zone type represents an IP address and is
+      IP version neutral.  The format of the textual representation
+      implies the IP version.  This type does not support scoped
+      addresses since it does not allow zone identifiers in the
+      address format.";
+    reference
+     "RFC 4007: IPv6 Scoped Address Architecture";
+  }
+
+  typedef ipv4-address-no-zone {
+    type inet:ipv4-address {
+      pattern '[0-9\.]*';
+    }
+    description
+      "An IPv4 address without a zone index.  This type, derived from
+       ipv4-address, may be used in situations where the zone is
+       known from the context and hence no zone index is needed.";
+  }
+
+  typedef ipv6-address-no-zone {
+    type inet:ipv6-address {
+      pattern '[0-9a-fA-F:\.]*';
+    }
+    description
+      "An IPv6 address without a zone index.  This type, derived from
+       ipv6-address, may be used in situations where the zone is
+       known from the context and hence no zone index is needed.";
+    reference
+     "RFC 4291: IP Version 6 Addressing Architecture
+      RFC 4007: IPv6 Scoped Address Architecture
+      RFC 5952: A Recommendation for IPv6 Address Text
+                Representation";
+  }
+
+  typedef ip-prefix {
+    type union {
+      type inet:ipv4-prefix;
+      type inet:ipv6-prefix;
+    }
+    description
+     "The ip-prefix type represents an IP prefix and is IP
+      version neutral.  The format of the textual representations
+      implies the IP version.";
+  }
+
+  typedef ipv4-prefix {
+    type string {
+      pattern
+         '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}'
+       +  '([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])'
+       + '/(([0-9])|([1-2][0-9])|(3[0-2]))';
+    }
+    description
+     "The ipv4-prefix type represents an IPv4 address prefix.
+      The prefix length is given by the number following the
+      slash character and must be less than or equal to 32.
+
+      A prefix length value of n corresponds to an IP address
+      mask that has n contiguous 1-bits from the most
+      significant bit (MSB) and all other bits set to 0.
+
+      The canonical format of an IPv4 prefix has all bits of
+      the IPv4 address set to zero that are not part of the
+      IPv4 prefix.";
+  }
+
+  typedef ipv6-prefix {
+    type string {
+      pattern '((:|[0-9a-fA-F]{0,4}):)([0-9a-fA-F]{0,4}:){0,5}'
+            + '((([0-9a-fA-F]{0,4}:)?(:|[0-9a-fA-F]{0,4}))|'
+            + '(((25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])\.){3}'
+            + '(25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])))'
+            + '(/(([0-9])|([0-9]{2})|(1[0-1][0-9])|(12[0-8])))';
+      pattern '(([^:]+:){6}(([^:]+:[^:]+)|(.*\..*)))|'
+            + '((([^:]+:)*[^:]+)?::(([^:]+:)*[^:]+)?)'
+            + '(/.+)';
+    }
+
+    description
+     "The ipv6-prefix type represents an IPv6 address prefix.
+      The prefix length is given by the number following the
+      slash character and must be less than or equal to 128.
+
+      A prefix length value of n corresponds to an IP address
+      mask that has n contiguous 1-bits from the most
+      significant bit (MSB) and all other bits set to 0.
+
+      The IPv6 address should have all bits that do not belong
+      to the prefix set to zero.
+
+      The canonical format of an IPv6 prefix has all bits of
+      the IPv6 address set to zero that are not part of the
+      IPv6 prefix.  Furthermore, the IPv6 address is represented
+      as defined in Section 4 of RFC 5952.";
+    reference
+     "RFC 5952: A Recommendation for IPv6 Address Text
+                Representation";
+  }
+
+  /*** collection of domain name and URI types ***/
+
+  typedef domain-name {
+    type string {
+      pattern
+        '((([a-zA-Z0-9_]([a-zA-Z0-9\-_]){0,61})?[a-zA-Z0-9]\.)*'
+      + '([a-zA-Z0-9_]([a-zA-Z0-9\-_]){0,61})?[a-zA-Z0-9]\.?)'
+      + '|\.';
+      length "1..253";
+    }
+    description
+     "The domain-name type represents a DNS domain name.  The
+      name SHOULD be fully qualified whenever possible.
+
+      Internet domain names are only loosely specified.  Section
+      3.5 of RFC 1034 recommends a syntax (modified in Section
+      2.1 of RFC 1123).  The pattern above is intended to allow
+      for current practice in domain name use, and some possible
+      future expansion.  It is designed to hold various types of
+      domain names, including names used for A or AAAA records
+      (host names) and other records, such as SRV records.  Note
+      that Internet host names have a stricter syntax (described
+      in RFC 952) than the DNS recommendations in RFCs 1034 and
+      1123, and that systems that want to store host names in
+      schema nodes using the domain-name type are recommended to
+      adhere to this stricter standard to ensure interoperability.
+
+      The encoding of DNS names in the DNS protocol is limited
+      to 255 characters.  Since the encoding consists of labels
+      prefixed by a length bytes and there is a trailing NULL
+      byte, only 253 characters can appear in the textual dotted
+      notation.
+
+      The description clause of schema nodes using the domain-name
+      type MUST describe when and how these names are resolved to
+      IP addresses.  Note that the resolution of a domain-name value
+      may require to query multiple DNS records (e.g., A for IPv4
+      and AAAA for IPv6).  The order of the resolution process and
+      which DNS record takes precedence can either be defined
+      explicitly or may depend on the configuration of the
+      resolver.
+
+      Domain-name values use the US-ASCII encoding.  Their canonical
+      format uses lowercase US-ASCII characters.  Internationalized
+      domain names MUST be A-labels as per RFC 5890.";
+    reference
+     "RFC  952: DoD Internet Host Table Specification
+      RFC 1034: Domain Names - Concepts and Facilities
+      RFC 1123: Requirements for Internet Hosts -- Application
+                and Support
+      RFC 2782: A DNS RR for specifying the location of services
+                (DNS SRV)
+      RFC 5890: Internationalized Domain Names in Applications
+                (IDNA): Definitions and Document Framework";
+  }
+
+  typedef host {
+    type union {
+      type inet:ip-address;
+      type inet:domain-name;
+    }
+    description
+     "The host type represents either an IP address or a DNS
+      domain name.";
+  }
+
+  typedef uri {
+    type string;
+    description
+     "The uri type represents a Uniform Resource Identifier
+      (URI) as defined by STD 66.
+
+      Objects using the uri type MUST be in US-ASCII encoding,
+      and MUST be normalized as described by RFC 3986 Sections
+      6.2.1, 6.2.2.1, and 6.2.2.2.  All unnecessary
+      percent-encoding is removed, and all case-insensitive
+      characters are set to lowercase except for hexadecimal
+      digits, which are normalized to uppercase as described in
+      Section 6.2.2.1.
+
+      The purpose of this normalization is to help provide
+      unique URIs.  Note that this normalization is not
+      sufficient to provide uniqueness.  Two URIs that are
+      textually distinct after this normalization may still be
+      equivalent.
+
+      Objects using the uri type may restrict the schemes that
+      they permit.  For example, 'data:' and 'urn:' schemes
+      might not be appropriate.
+
+      A zero-length URI is not a valid URI.  This can be used to
+      express 'URI absent' where required.
+
+      In the value set and its semantics, this type is equivalent
+      to the Uri SMIv2 textual convention defined in RFC 5017.";
+    reference
+     "RFC 3986: Uniform Resource Identifier (URI): Generic Syntax
+      RFC 3305: Report from the Joint W3C/IETF URI Planning Interest
+                Group: Uniform Resource Identifiers (URIs), URLs,
+                and Uniform Resource Names (URNs): Clarifications
+                and Recommendations
+      RFC 5017: MIB Textual Conventions for Uniform Resource
+                Identifiers (URIs)";
+  }
+
+}
diff --git a/config-models/aether-1.x/files/yang/qos-profile.yang b/config-models/aether-1.x/files/yang/qos-profile.yang
new file mode 100755
index 0000000..257f4ff
--- /dev/null
+++ b/config-models/aether-1.x/files/yang/qos-profile.yang
@@ -0,0 +1,71 @@
+// SPDX-FileCopyrightText: 2021 Open Networking Foundation
+//
+// SPDX-License-Identifier: LicenseRef-ONF-Member-Only-1.0
+
+module qos-profile {
+  namespace "http://opennetworking.org/aether/qos-profile";
+  prefix pro;
+
+  organization "Open Networking Foundation.";
+  contact "Scott Baker";
+  description "To generate JSON from this use command
+    pyang -f jtoxx test1.yang | python3 -m json.tool > test1.json
+    Copied from YangUIComponents project";
+
+  revision "2020-08-18" {
+    description "An Aether qos Profile";
+    reference "RFC 6087";
+  }
+
+  // TODO: Think more on whether this should be a UUID or
+  // simply a unique name. If it's a UUID, could fix the 
+  // string length.
+  typedef qos-profile-id {
+        type string {
+            length 1..32;
+        }
+  }
+
+  container qos-profile {
+    description "The top level container";
+
+    list qos-profile {
+      key "id";
+      description
+        "List of qos profiles";
+
+      leaf id {
+        type qos-profile-id;
+        description "ID for this qos profile.";
+      }
+
+      container apn-ambr {
+        leaf uplink {
+          type uint32 {
+            range 0..4294967295;
+          }
+          default 0;
+          units bps;
+          description
+            "Upstream aggregate maximum bit rate";
+        }
+        leaf downlink {
+          type uint32 {
+            range 0..4294967295;
+          }
+          default 0;
+          units bps;
+          description
+            "Downstream aggregate maximum bit rate";
+        }        
+      }
+      
+      leaf description {
+        type string {
+          length 1..100;
+        }
+        description "description of this profile";
+      }
+    }
+  } 
+}
diff --git a/config-models/aether-1.x/files/yang/up-profile.yang b/config-models/aether-1.x/files/yang/up-profile.yang
new file mode 100755
index 0000000..6a43bf4
--- /dev/null
+++ b/config-models/aether-1.x/files/yang/up-profile.yang
@@ -0,0 +1,64 @@
+// SPDX-FileCopyrightText: 2021 Open Networking Foundation
+//
+// SPDX-License-Identifier: LicenseRef-ONF-Member-Only-1.0
+
+module up-profile {
+  namespace "http://opennetworking.org/aether/user-plane-profile";
+  prefix pro;
+
+  organization "Open Networking Foundation.";
+  contact "Scott Baker";
+  description "To generate JSON from this use command
+    pyang -f jtoxx test1.yang | python3 -m json.tool > test1.json
+    Copied from YangUIComponents project";
+
+  revision "2020-08-18" {
+    description "An Aether user plane Profile";
+    reference "RFC 6087";
+  }
+
+  // TODO: Think more on whether this should be a UUID or
+  // simply a unique name. If it's a UUID, could fix the 
+  // string length.
+  typedef up-profile-id {
+        type string {
+            length 1..32;
+        }
+  }
+
+  container up-profile {
+    description "The top level container";
+
+    list up-profile {
+      key "id";
+      description
+        "List of user plane profiles";
+
+      leaf id {
+        type up-profile-id;
+        description "ID for this user plane profile.";
+      }
+
+      leaf user-plane {
+        type string {
+          length 1..255;
+        }
+        description "user plane name";
+      }
+
+      leaf access-control {
+        type string {
+          length 1..32;
+        }
+        description "access control policy";
+      }
+
+      leaf description {
+        type string {
+          length 1..100;
+        }
+        description "description of this profile";
+      }      
+    }
+  } 
+}