diff --git a/vendor/github.com/gorilla/context/.travis.yml b/vendor/github.com/gorilla/context/.travis.yml
new file mode 100644
index 0000000..6f440f1
--- /dev/null
+++ b/vendor/github.com/gorilla/context/.travis.yml
@@ -0,0 +1,19 @@
+language: go
+sudo: false
+
+matrix:
+  include:
+    - go: 1.3
+    - go: 1.4
+    - go: 1.5
+    - go: 1.6
+    - go: 1.7
+    - go: tip
+  allow_failures:
+    - go: tip
+
+script:
+  - go get -t -v ./...
+  - diff -u <(echo -n) <(gofmt -d .)
+  - go vet $(go list ./... | grep -v /vendor/)
+  - go test -v -race ./...
diff --git a/vendor/github.com/gorilla/context/LICENSE b/vendor/github.com/gorilla/context/LICENSE
new file mode 100644
index 0000000..0e5fb87
--- /dev/null
+++ b/vendor/github.com/gorilla/context/LICENSE
@@ -0,0 +1,27 @@
+Copyright (c) 2012 Rodrigo Moraes. All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are
+met:
+
+	 * Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimer.
+	 * Redistributions in binary form must reproduce the above
+copyright notice, this list of conditions and the following disclaimer
+in the documentation and/or other materials provided with the
+distribution.
+	 * Neither the name of Google Inc. nor the names of its
+contributors may be used to endorse or promote products derived from
+this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
diff --git a/vendor/github.com/gorilla/context/README.md b/vendor/github.com/gorilla/context/README.md
new file mode 100644
index 0000000..08f8669
--- /dev/null
+++ b/vendor/github.com/gorilla/context/README.md
@@ -0,0 +1,10 @@
+context
+=======
+[![Build Status](https://travis-ci.org/gorilla/context.png?branch=master)](https://travis-ci.org/gorilla/context)
+
+gorilla/context is a general purpose registry for global request variables.
+
+> Note: gorilla/context, having been born well before `context.Context` existed, does not play well
+> with the shallow copying of the request that [`http.Request.WithContext`](https://golang.org/pkg/net/http/#Request.WithContext) (added to net/http Go 1.7 onwards) performs. You should either use *just* gorilla/context, or moving forward, the new `http.Request.Context()`.
+
+Read the full documentation here: http://www.gorillatoolkit.org/pkg/context
diff --git a/vendor/github.com/gorilla/context/context.go b/vendor/github.com/gorilla/context/context.go
new file mode 100644
index 0000000..81cb128
--- /dev/null
+++ b/vendor/github.com/gorilla/context/context.go
@@ -0,0 +1,143 @@
+// Copyright 2012 The Gorilla Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package context
+
+import (
+	"net/http"
+	"sync"
+	"time"
+)
+
+var (
+	mutex sync.RWMutex
+	data  = make(map[*http.Request]map[interface{}]interface{})
+	datat = make(map[*http.Request]int64)
+)
+
+// Set stores a value for a given key in a given request.
+func Set(r *http.Request, key, val interface{}) {
+	mutex.Lock()
+	if data[r] == nil {
+		data[r] = make(map[interface{}]interface{})
+		datat[r] = time.Now().Unix()
+	}
+	data[r][key] = val
+	mutex.Unlock()
+}
+
+// Get returns a value stored for a given key in a given request.
+func Get(r *http.Request, key interface{}) interface{} {
+	mutex.RLock()
+	if ctx := data[r]; ctx != nil {
+		value := ctx[key]
+		mutex.RUnlock()
+		return value
+	}
+	mutex.RUnlock()
+	return nil
+}
+
+// GetOk returns stored value and presence state like multi-value return of map access.
+func GetOk(r *http.Request, key interface{}) (interface{}, bool) {
+	mutex.RLock()
+	if _, ok := data[r]; ok {
+		value, ok := data[r][key]
+		mutex.RUnlock()
+		return value, ok
+	}
+	mutex.RUnlock()
+	return nil, false
+}
+
+// GetAll returns all stored values for the request as a map. Nil is returned for invalid requests.
+func GetAll(r *http.Request) map[interface{}]interface{} {
+	mutex.RLock()
+	if context, ok := data[r]; ok {
+		result := make(map[interface{}]interface{}, len(context))
+		for k, v := range context {
+			result[k] = v
+		}
+		mutex.RUnlock()
+		return result
+	}
+	mutex.RUnlock()
+	return nil
+}
+
+// GetAllOk returns all stored values for the request as a map and a boolean value that indicates if
+// the request was registered.
+func GetAllOk(r *http.Request) (map[interface{}]interface{}, bool) {
+	mutex.RLock()
+	context, ok := data[r]
+	result := make(map[interface{}]interface{}, len(context))
+	for k, v := range context {
+		result[k] = v
+	}
+	mutex.RUnlock()
+	return result, ok
+}
+
+// Delete removes a value stored for a given key in a given request.
+func Delete(r *http.Request, key interface{}) {
+	mutex.Lock()
+	if data[r] != nil {
+		delete(data[r], key)
+	}
+	mutex.Unlock()
+}
+
+// Clear removes all values stored for a given request.
+//
+// This is usually called by a handler wrapper to clean up request
+// variables at the end of a request lifetime. See ClearHandler().
+func Clear(r *http.Request) {
+	mutex.Lock()
+	clear(r)
+	mutex.Unlock()
+}
+
+// clear is Clear without the lock.
+func clear(r *http.Request) {
+	delete(data, r)
+	delete(datat, r)
+}
+
+// Purge removes request data stored for longer than maxAge, in seconds.
+// It returns the amount of requests removed.
+//
+// If maxAge <= 0, all request data is removed.
+//
+// This is only used for sanity check: in case context cleaning was not
+// properly set some request data can be kept forever, consuming an increasing
+// amount of memory. In case this is detected, Purge() must be called
+// periodically until the problem is fixed.
+func Purge(maxAge int) int {
+	mutex.Lock()
+	count := 0
+	if maxAge <= 0 {
+		count = len(data)
+		data = make(map[*http.Request]map[interface{}]interface{})
+		datat = make(map[*http.Request]int64)
+	} else {
+		min := time.Now().Unix() - int64(maxAge)
+		for r := range data {
+			if datat[r] < min {
+				clear(r)
+				count++
+			}
+		}
+	}
+	mutex.Unlock()
+	return count
+}
+
+// ClearHandler wraps an http.Handler and clears request values at the end
+// of a request lifetime.
+func ClearHandler(h http.Handler) http.Handler {
+	return http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+		defer Clear(r)
+		h.ServeHTTP(w, r)
+	})
+}
diff --git a/vendor/github.com/gorilla/context/doc.go b/vendor/github.com/gorilla/context/doc.go
new file mode 100644
index 0000000..448d1bf
--- /dev/null
+++ b/vendor/github.com/gorilla/context/doc.go
@@ -0,0 +1,88 @@
+// Copyright 2012 The Gorilla Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+/*
+Package context stores values shared during a request lifetime.
+
+Note: gorilla/context, having been born well before `context.Context` existed,
+does not play well > with the shallow copying of the request that
+[`http.Request.WithContext`](https://golang.org/pkg/net/http/#Request.WithContext)
+(added to net/http Go 1.7 onwards) performs. You should either use *just*
+gorilla/context, or moving forward, the new `http.Request.Context()`.
+
+For example, a router can set variables extracted from the URL and later
+application handlers can access those values, or it can be used to store
+sessions values to be saved at the end of a request. There are several
+others common uses.
+
+The idea was posted by Brad Fitzpatrick to the go-nuts mailing list:
+
+	http://groups.google.com/group/golang-nuts/msg/e2d679d303aa5d53
+
+Here's the basic usage: first define the keys that you will need. The key
+type is interface{} so a key can be of any type that supports equality.
+Here we define a key using a custom int type to avoid name collisions:
+
+	package foo
+
+	import (
+		"github.com/gorilla/context"
+	)
+
+	type key int
+
+	const MyKey key = 0
+
+Then set a variable. Variables are bound to an http.Request object, so you
+need a request instance to set a value:
+
+	context.Set(r, MyKey, "bar")
+
+The application can later access the variable using the same key you provided:
+
+	func MyHandler(w http.ResponseWriter, r *http.Request) {
+		// val is "bar".
+		val := context.Get(r, foo.MyKey)
+
+		// returns ("bar", true)
+		val, ok := context.GetOk(r, foo.MyKey)
+		// ...
+	}
+
+And that's all about the basic usage. We discuss some other ideas below.
+
+Any type can be stored in the context. To enforce a given type, make the key
+private and wrap Get() and Set() to accept and return values of a specific
+type:
+
+	type key int
+
+	const mykey key = 0
+
+	// GetMyKey returns a value for this package from the request values.
+	func GetMyKey(r *http.Request) SomeType {
+		if rv := context.Get(r, mykey); rv != nil {
+			return rv.(SomeType)
+		}
+		return nil
+	}
+
+	// SetMyKey sets a value for this package in the request values.
+	func SetMyKey(r *http.Request, val SomeType) {
+		context.Set(r, mykey, val)
+	}
+
+Variables must be cleared at the end of a request, to remove all values
+that were stored. This can be done in an http.Handler, after a request was
+served. Just call Clear() passing the request:
+
+	context.Clear(r)
+
+...or use ClearHandler(), which conveniently wraps an http.Handler to clear
+variables at the end of a request lifetime.
+
+The Routers from the packages gorilla/mux and gorilla/pat call Clear()
+so if you are using either of them you don't need to clear the context manually.
+*/
+package context
diff --git a/vendor/github.com/gorilla/mux/.travis.yml b/vendor/github.com/gorilla/mux/.travis.yml
new file mode 100644
index 0000000..ad0935d
--- /dev/null
+++ b/vendor/github.com/gorilla/mux/.travis.yml
@@ -0,0 +1,23 @@
+language: go
+sudo: false
+
+matrix:
+  include:
+    - go: 1.5.x
+    - go: 1.6.x
+    - go: 1.7.x
+    - go: 1.8.x
+    - go: 1.9.x
+    - go: 1.10.x
+    - go: tip
+  allow_failures:
+    - go: tip
+
+install:
+  - # Skip
+
+script:
+  - go get -t -v ./...
+  - diff -u <(echo -n) <(gofmt -d .)
+  - go tool vet .
+  - go test -v -race ./...
diff --git a/vendor/github.com/gorilla/mux/ISSUE_TEMPLATE.md b/vendor/github.com/gorilla/mux/ISSUE_TEMPLATE.md
new file mode 100644
index 0000000..232be82
--- /dev/null
+++ b/vendor/github.com/gorilla/mux/ISSUE_TEMPLATE.md
@@ -0,0 +1,11 @@
+**What version of Go are you running?** (Paste the output of `go version`)
+
+
+**What version of gorilla/mux are you at?** (Paste the output of `git rev-parse HEAD` inside `$GOPATH/src/github.com/gorilla/mux`)
+
+
+**Describe your problem** (and what you have tried so far)
+
+
+**Paste a minimal, runnable, reproduction of your issue below** (use backticks to format it)
+
diff --git a/vendor/github.com/gorilla/mux/README.md b/vendor/github.com/gorilla/mux/README.md
index 94d396c..e424397 100644
--- a/vendor/github.com/gorilla/mux/README.md
+++ b/vendor/github.com/gorilla/mux/README.md
@@ -1,7 +1,8 @@
-gorilla/mux
-===
+# gorilla/mux
+
 [![GoDoc](https://godoc.org/github.com/gorilla/mux?status.svg)](https://godoc.org/github.com/gorilla/mux)
 [![Build Status](https://travis-ci.org/gorilla/mux.svg?branch=master)](https://travis-ci.org/gorilla/mux)
+[![Sourcegraph](https://sourcegraph.com/github.com/gorilla/mux/-/badge.svg)](https://sourcegraph.com/github.com/gorilla/mux?badge)
 
 ![Gorilla Logo](http://www.gorillatoolkit.org/static/images/gorilla-icon-64.png)
 
@@ -14,7 +15,7 @@
 
 * It implements the `http.Handler` interface so it is compatible with the standard `http.ServeMux`.
 * Requests can be matched based on URL host, path, path prefix, schemes, header and query values, HTTP methods or using custom matchers.
-* URL hosts and paths can have variables with an optional regular expression.
+* URL hosts, paths and query values can have variables with an optional regular expression.
 * Registered URLs can be built, or "reversed", which helps maintaining references to resources.
 * Routes can be used as subrouters: nested routes are only tested if the parent route matches. This is useful to define groups of routes that share common conditions like a host, a path prefix or other repeated attributes. As a bonus, this optimizes request matching.
 
@@ -23,9 +24,12 @@
 * [Install](#install)
 * [Examples](#examples)
 * [Matching Routes](#matching-routes)
-* [Listing Routes](#listing-routes)
 * [Static Files](#static-files)
 * [Registered URLs](#registered-urls)
+* [Walking Routes](#walking-routes)
+* [Graceful Shutdown](#graceful-shutdown)
+* [Middleware](#middleware)
+* [Testing Handlers](#testing-handlers)
 * [Full Example](#full-example)
 
 ---
@@ -44,11 +48,11 @@
 
 ```go
 func main() {
-	r := mux.NewRouter()
-	r.HandleFunc("/", HomeHandler)
-	r.HandleFunc("/products", ProductsHandler)
-	r.HandleFunc("/articles", ArticlesHandler)
-	http.Handle("/", r)
+    r := mux.NewRouter()
+    r.HandleFunc("/", HomeHandler)
+    r.HandleFunc("/products", ProductsHandler)
+    r.HandleFunc("/articles", ArticlesHandler)
+    http.Handle("/", r)
 }
 ```
 
@@ -67,9 +71,9 @@
 
 ```go
 func ArticlesCategoryHandler(w http.ResponseWriter, r *http.Request) {
-	vars := mux.Vars(r)
-	w.WriteHeader(http.StatusOK)
-	fmt.Fprintf(w, "Category: %v\n", vars["category"])
+    vars := mux.Vars(r)
+    w.WriteHeader(http.StatusOK)
+    fmt.Fprintf(w, "Category: %v\n", vars["category"])
 }
 ```
 
@@ -121,7 +125,7 @@
 
 ```go
 r.MatcherFunc(func(r *http.Request, rm *RouteMatch) bool {
-	return r.ProtoMajor == 0
+    return r.ProtoMajor == 0
 })
 ```
 
@@ -134,6 +138,14 @@
   Schemes("http")
 ```
 
+Routes are tested in the order they were added to the router. If two routes match, the first one wins:
+
+```go
+r := mux.NewRouter()
+r.HandleFunc("/specific", specificHandler)
+r.PathPrefix("/").Handler(catchAllHandler)
+```
+
 Setting the same matching conditions again and again can be boring, so we have a way to group several routes that share the same requirements. We call it "subrouting".
 
 For example, let's say we have several URLs that should only match when the host is `www.example.com`. Create a route for that host and get a "subrouter" from it:
@@ -168,68 +180,33 @@
 s.HandleFunc("/{key}/details", ProductDetailsHandler)
 ```
 
-### Listing Routes
-
-Routes on a mux can be listed using the Router.Walk method—useful for generating documentation:
-
-```go
-package main
-
-import (
-    "fmt"
-    "net/http"
-
-    "github.com/gorilla/mux"
-)
-
-func handler(w http.ResponseWriter, r *http.Request) {
-    return
-}
-
-func main() {
-    r := mux.NewRouter()
-    r.HandleFunc("/", handler)
-    r.HandleFunc("/products", handler)
-    r.HandleFunc("/articles", handler)
-    r.HandleFunc("/articles/{id}", handler)
-    r.Walk(func(route *mux.Route, router *mux.Router, ancestors []*mux.Route) error {
-        t, err := route.GetPathTemplate()
-        if err != nil {
-            return err
-        }
-        fmt.Println(t)
-        return nil
-    })
-    http.Handle("/", r)
-}
-```
 
 ### Static Files
 
 Note that the path provided to `PathPrefix()` represents a "wildcard": calling
 `PathPrefix("/static/").Handler(...)` means that the handler will be passed any
-request that matches "/static/*". This makes it easy to serve static files with mux:
+request that matches "/static/\*". This makes it easy to serve static files with mux:
 
 ```go
 func main() {
-	var dir string
+    var dir string
 
-	flag.StringVar(&dir, "dir", ".", "the directory to serve files from. Defaults to the current dir")
-	flag.Parse()
-	r := mux.NewRouter()
+    flag.StringVar(&dir, "dir", ".", "the directory to serve files from. Defaults to the current dir")
+    flag.Parse()
+    r := mux.NewRouter()
 
-	// This will serve files under http://localhost:8000/static/<filename>
-	r.PathPrefix("/static/").Handler(http.StripPrefix("/static/", http.FileServer(http.Dir(dir))))
+    // This will serve files under http://localhost:8000/static/<filename>
+    r.PathPrefix("/static/").Handler(http.StripPrefix("/static/", http.FileServer(http.Dir(dir))))
 
-	srv := &http.Server{
-		Handler:      r,
-		Addr:         "127.0.0.1:8000",
-		// Good practice: enforce timeouts for servers you create!
-		WriteTimeout: 15 * time.Second,
-		ReadTimeout:  15 * time.Second,
-	}
+    srv := &http.Server{
+        Handler:      r,
+        Addr:         "127.0.0.1:8000",
+        // Good practice: enforce timeouts for servers you create!
+        WriteTimeout: 15 * time.Second,
+        ReadTimeout:  15 * time.Second,
+    }
 
-	log.Fatal(srv.ListenAndServe())
+    log.Fatal(srv.ListenAndServe())
 }
 ```
 
@@ -257,19 +234,21 @@
 "/articles/technology/42"
 ```
 
-This also works for host variables:
+This also works for host and query value variables:
 
 ```go
 r := mux.NewRouter()
 r.Host("{subdomain}.domain.com").
   Path("/articles/{category}/{id:[0-9]+}").
+  Queries("filter", "{filter}").
   HandlerFunc(ArticleHandler).
   Name("article")
 
-// url.String() will be "http://news.domain.com/articles/technology/42"
+// url.String() will be "http://news.domain.com/articles/technology/42?filter=gorilla"
 url, err := r.Get("article").URL("subdomain", "news",
                                  "category", "technology",
-                                 "id", "42")
+                                 "id", "42",
+                                 "filter", "gorilla")
 ```
 
 All variables defined in the route are required, and their values must conform to the corresponding patterns. These requirements guarantee that a generated URL will always match a registered route -- the only exception is for explicitly defined "build-only" routes which never match.
@@ -307,6 +286,337 @@
                                  "id", "42")
 ```
 
+### Walking Routes
+
+The `Walk` function on `mux.Router` can be used to visit all of the routes that are registered on a router. For example,
+the following prints all of the registered routes:
+
+```go
+package main
+
+import (
+	"fmt"
+	"net/http"
+	"strings"
+
+	"github.com/gorilla/mux"
+)
+
+func handler(w http.ResponseWriter, r *http.Request) {
+	return
+}
+
+func main() {
+	r := mux.NewRouter()
+	r.HandleFunc("/", handler)
+	r.HandleFunc("/products", handler).Methods("POST")
+	r.HandleFunc("/articles", handler).Methods("GET")
+	r.HandleFunc("/articles/{id}", handler).Methods("GET", "PUT")
+	r.HandleFunc("/authors", handler).Queries("surname", "{surname}")
+	err := r.Walk(func(route *mux.Route, router *mux.Router, ancestors []*mux.Route) error {
+		pathTemplate, err := route.GetPathTemplate()
+		if err == nil {
+			fmt.Println("ROUTE:", pathTemplate)
+		}
+		pathRegexp, err := route.GetPathRegexp()
+		if err == nil {
+			fmt.Println("Path regexp:", pathRegexp)
+		}
+		queriesTemplates, err := route.GetQueriesTemplates()
+		if err == nil {
+			fmt.Println("Queries templates:", strings.Join(queriesTemplates, ","))
+		}
+		queriesRegexps, err := route.GetQueriesRegexp()
+		if err == nil {
+			fmt.Println("Queries regexps:", strings.Join(queriesRegexps, ","))
+		}
+		methods, err := route.GetMethods()
+		if err == nil {
+			fmt.Println("Methods:", strings.Join(methods, ","))
+		}
+		fmt.Println()
+		return nil
+	})
+
+	if err != nil {
+		fmt.Println(err)
+	}
+
+	http.Handle("/", r)
+}
+```
+
+### Graceful Shutdown
+
+Go 1.8 introduced the ability to [gracefully shutdown](https://golang.org/doc/go1.8#http_shutdown) a `*http.Server`. Here's how to do that alongside `mux`:
+
+```go
+package main
+
+import (
+    "context"
+    "flag"
+    "log"
+    "net/http"
+    "os"
+    "os/signal"
+    "time"
+
+    "github.com/gorilla/mux"
+)
+
+func main() {
+    var wait time.Duration
+    flag.DurationVar(&wait, "graceful-timeout", time.Second * 15, "the duration for which the server gracefully wait for existing connections to finish - e.g. 15s or 1m")
+    flag.Parse()
+
+    r := mux.NewRouter()
+    // Add your routes as needed
+
+    srv := &http.Server{
+        Addr:         "0.0.0.0:8080",
+        // Good practice to set timeouts to avoid Slowloris attacks.
+        WriteTimeout: time.Second * 15,
+        ReadTimeout:  time.Second * 15,
+        IdleTimeout:  time.Second * 60,
+        Handler: r, // Pass our instance of gorilla/mux in.
+    }
+
+    // Run our server in a goroutine so that it doesn't block.
+    go func() {
+        if err := srv.ListenAndServe(); err != nil {
+            log.Println(err)
+        }
+    }()
+
+    c := make(chan os.Signal, 1)
+    // We'll accept graceful shutdowns when quit via SIGINT (Ctrl+C)
+    // SIGKILL, SIGQUIT or SIGTERM (Ctrl+/) will not be caught.
+    signal.Notify(c, os.Interrupt)
+
+    // Block until we receive our signal.
+    <-c
+
+    // Create a deadline to wait for.
+    ctx, cancel := context.WithTimeout(context.Background(), wait)
+    defer cancel()
+    // Doesn't block if no connections, but will otherwise wait
+    // until the timeout deadline.
+    srv.Shutdown(ctx)
+    // Optionally, you could run srv.Shutdown in a goroutine and block on
+    // <-ctx.Done() if your application should wait for other services
+    // to finalize based on context cancellation.
+    log.Println("shutting down")
+    os.Exit(0)
+}
+```
+
+### Middleware
+
+Mux supports the addition of middlewares to a [Router](https://godoc.org/github.com/gorilla/mux#Router), which are executed in the order they are added if a match is found, including its subrouters.
+Middlewares are (typically) small pieces of code which take one request, do something with it, and pass it down to another middleware or the final handler. Some common use cases for middleware are request logging, header manipulation, or `ResponseWriter` hijacking.
+
+Mux middlewares are defined using the de facto standard type:
+
+```go
+type MiddlewareFunc func(http.Handler) http.Handler
+```
+
+Typically, the returned handler is a closure which does something with the http.ResponseWriter and http.Request passed to it, and then calls the handler passed as parameter to the MiddlewareFunc. This takes advantage of closures being able access variables from the context where they are created, while retaining the signature enforced by the receivers.
+
+A very basic middleware which logs the URI of the request being handled could be written as:
+
+```go
+func loggingMiddleware(next http.Handler) http.Handler {
+    return http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+        // Do stuff here
+        log.Println(r.RequestURI)
+        // Call the next handler, which can be another middleware in the chain, or the final handler.
+        next.ServeHTTP(w, r)
+    })
+}
+```
+
+Middlewares can be added to a router using `Router.Use()`:
+
+```go
+r := mux.NewRouter()
+r.HandleFunc("/", handler)
+r.Use(loggingMiddleware)
+```
+
+A more complex authentication middleware, which maps session token to users, could be written as:
+
+```go
+// Define our struct
+type authenticationMiddleware struct {
+	tokenUsers map[string]string
+}
+
+// Initialize it somewhere
+func (amw *authenticationMiddleware) Populate() {
+	amw.tokenUsers["00000000"] = "user0"
+	amw.tokenUsers["aaaaaaaa"] = "userA"
+	amw.tokenUsers["05f717e5"] = "randomUser"
+	amw.tokenUsers["deadbeef"] = "user0"
+}
+
+// Middleware function, which will be called for each request
+func (amw *authenticationMiddleware) Middleware(next http.Handler) http.Handler {
+    return http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+        token := r.Header.Get("X-Session-Token")
+
+        if user, found := amw.tokenUsers[token]; found {
+        	// We found the token in our map
+        	log.Printf("Authenticated user %s\n", user)
+        	// Pass down the request to the next middleware (or final handler)
+        	next.ServeHTTP(w, r)
+        } else {
+        	// Write an error and stop the handler chain
+        	http.Error(w, "Forbidden", http.StatusForbidden)
+        }
+    })
+}
+```
+
+```go
+r := mux.NewRouter()
+r.HandleFunc("/", handler)
+
+amw := authenticationMiddleware{}
+amw.Populate()
+
+r.Use(amw.Middleware)
+```
+
+Note: The handler chain will be stopped if your middleware doesn't call `next.ServeHTTP()` with the corresponding parameters. This can be used to abort a request if the middleware writer wants to. Middlewares _should_ write to `ResponseWriter` if they _are_ going to terminate the request, and they _should not_ write to `ResponseWriter` if they _are not_ going to terminate it.
+
+### Testing Handlers
+
+Testing handlers in a Go web application is straightforward, and _mux_ doesn't complicate this any further. Given two files: `endpoints.go` and `endpoints_test.go`, here's how we'd test an application using _mux_.
+
+First, our simple HTTP handler:
+
+```go
+// endpoints.go
+package main
+
+func HealthCheckHandler(w http.ResponseWriter, r *http.Request) {
+    // A very simple health check.
+    w.WriteHeader(http.StatusOK)
+    w.Header().Set("Content-Type", "application/json")
+
+    // In the future we could report back on the status of our DB, or our cache
+    // (e.g. Redis) by performing a simple PING, and include them in the response.
+    io.WriteString(w, `{"alive": true}`)
+}
+
+func main() {
+    r := mux.NewRouter()
+    r.HandleFunc("/health", HealthCheckHandler)
+
+    log.Fatal(http.ListenAndServe("localhost:8080", r))
+}
+```
+
+Our test code:
+
+```go
+// endpoints_test.go
+package main
+
+import (
+    "net/http"
+    "net/http/httptest"
+    "testing"
+)
+
+func TestHealthCheckHandler(t *testing.T) {
+    // Create a request to pass to our handler. We don't have any query parameters for now, so we'll
+    // pass 'nil' as the third parameter.
+    req, err := http.NewRequest("GET", "/health", nil)
+    if err != nil {
+        t.Fatal(err)
+    }
+
+    // We create a ResponseRecorder (which satisfies http.ResponseWriter) to record the response.
+    rr := httptest.NewRecorder()
+    handler := http.HandlerFunc(HealthCheckHandler)
+
+    // Our handlers satisfy http.Handler, so we can call their ServeHTTP method
+    // directly and pass in our Request and ResponseRecorder.
+    handler.ServeHTTP(rr, req)
+
+    // Check the status code is what we expect.
+    if status := rr.Code; status != http.StatusOK {
+        t.Errorf("handler returned wrong status code: got %v want %v",
+            status, http.StatusOK)
+    }
+
+    // Check the response body is what we expect.
+    expected := `{"alive": true}`
+    if rr.Body.String() != expected {
+        t.Errorf("handler returned unexpected body: got %v want %v",
+            rr.Body.String(), expected)
+    }
+}
+```
+
+In the case that our routes have [variables](#examples), we can pass those in the request. We could write
+[table-driven tests](https://dave.cheney.net/2013/06/09/writing-table-driven-tests-in-go) to test multiple
+possible route variables as needed.
+
+```go
+// endpoints.go
+func main() {
+    r := mux.NewRouter()
+    // A route with a route variable:
+    r.HandleFunc("/metrics/{type}", MetricsHandler)
+
+    log.Fatal(http.ListenAndServe("localhost:8080", r))
+}
+```
+
+Our test file, with a table-driven test of `routeVariables`:
+
+```go
+// endpoints_test.go
+func TestMetricsHandler(t *testing.T) {
+    tt := []struct{
+        routeVariable string
+        shouldPass bool
+    }{
+        {"goroutines", true},
+        {"heap", true},
+        {"counters", true},
+        {"queries", true},
+        {"adhadaeqm3k", false},
+    }
+
+    for _, tc := range tt {
+        path := fmt.Sprintf("/metrics/%s", tc.routeVariable)
+        req, err := http.NewRequest("GET", path, nil)
+        if err != nil {
+            t.Fatal(err)
+        }
+
+        rr := httptest.NewRecorder()
+	
+	// Need to create a router that we can pass the request through so that the vars will be added to the context
+	router := mux.NewRouter()
+        router.HandleFunc("/metrics/{type}", MetricsHandler)
+        router.ServeHTTP(rr, req)
+
+        // In this case, our MetricsHandler returns a non-200 response
+        // for a route variable it doesn't know about.
+        if rr.Code == http.StatusOK && !tc.shouldPass {
+            t.Errorf("handler should have failed on routeVariable %s: got %v want %v",
+                tc.routeVariable, rr.Code, http.StatusOK)
+        }
+    }
+}
+```
+
 ## Full Example
 
 Here's a complete, runnable example of a small `mux` based server:
@@ -315,22 +625,22 @@
 package main
 
 import (
-	"net/http"
-	"log"
-	"github.com/gorilla/mux"
+    "net/http"
+    "log"
+    "github.com/gorilla/mux"
 )
 
 func YourHandler(w http.ResponseWriter, r *http.Request) {
-	w.Write([]byte("Gorilla!\n"))
+    w.Write([]byte("Gorilla!\n"))
 }
 
 func main() {
-	r := mux.NewRouter()
-	// Routes consist of a path and a handler function.
-	r.HandleFunc("/", YourHandler)
+    r := mux.NewRouter()
+    // Routes consist of a path and a handler function.
+    r.HandleFunc("/", YourHandler)
 
-	// Bind to a port and pass our router in
-	log.Fatal(http.ListenAndServe(":8000", r))
+    // Bind to a port and pass our router in
+    log.Fatal(http.ListenAndServe(":8000", r))
 }
 ```
 
diff --git a/vendor/github.com/gorilla/mux/doc.go b/vendor/github.com/gorilla/mux/doc.go
index 00daf4a..38957de 100644
--- a/vendor/github.com/gorilla/mux/doc.go
+++ b/vendor/github.com/gorilla/mux/doc.go
@@ -12,8 +12,8 @@
 
 	* Requests can be matched based on URL host, path, path prefix, schemes,
 	  header and query values, HTTP methods or using custom matchers.
-	* URL hosts and paths can have variables with an optional regular
-	  expression.
+	* URL hosts, paths and query values can have variables with an optional
+	  regular expression.
 	* Registered URLs can be built, or "reversed", which helps maintaining
 	  references to resources.
 	* Routes can be used as subrouters: nested routes are only tested if the
@@ -188,18 +188,20 @@
 
 	"/articles/technology/42"
 
-This also works for host variables:
+This also works for host and query value variables:
 
 	r := mux.NewRouter()
 	r.Host("{subdomain}.domain.com").
 	  Path("/articles/{category}/{id:[0-9]+}").
+	  Queries("filter", "{filter}").
 	  HandlerFunc(ArticleHandler).
 	  Name("article")
 
-	// url.String() will be "http://news.domain.com/articles/technology/42"
+	// url.String() will be "http://news.domain.com/articles/technology/42?filter=gorilla"
 	url, err := r.Get("article").URL("subdomain", "news",
 	                                 "category", "technology",
-	                                 "id", "42")
+	                                 "id", "42",
+	                                 "filter", "gorilla")
 
 All variables defined in the route are required, and their values must
 conform to the corresponding patterns. These requirements guarantee that a
@@ -236,5 +238,69 @@
 	url, err := r.Get("article").URL("subdomain", "news",
 	                                 "category", "technology",
 	                                 "id", "42")
+
+Mux supports the addition of middlewares to a Router, which are executed in the order they are added if a match is found, including its subrouters. Middlewares are (typically) small pieces of code which take one request, do something with it, and pass it down to another middleware or the final handler. Some common use cases for middleware are request logging, header manipulation, or ResponseWriter hijacking.
+
+	type MiddlewareFunc func(http.Handler) http.Handler
+
+Typically, the returned handler is a closure which does something with the http.ResponseWriter and http.Request passed to it, and then calls the handler passed as parameter to the MiddlewareFunc (closures can access variables from the context where they are created).
+
+A very basic middleware which logs the URI of the request being handled could be written as:
+
+	func simpleMw(next http.Handler) http.Handler {
+		return http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+			// Do stuff here
+			log.Println(r.RequestURI)
+			// Call the next handler, which can be another middleware in the chain, or the final handler.
+			next.ServeHTTP(w, r)
+		})
+	}
+
+Middlewares can be added to a router using `Router.Use()`:
+
+	r := mux.NewRouter()
+	r.HandleFunc("/", handler)
+	r.Use(simpleMw)
+
+A more complex authentication middleware, which maps session token to users, could be written as:
+
+	// Define our struct
+	type authenticationMiddleware struct {
+		tokenUsers map[string]string
+	}
+
+	// Initialize it somewhere
+	func (amw *authenticationMiddleware) Populate() {
+		amw.tokenUsers["00000000"] = "user0"
+		amw.tokenUsers["aaaaaaaa"] = "userA"
+		amw.tokenUsers["05f717e5"] = "randomUser"
+		amw.tokenUsers["deadbeef"] = "user0"
+	}
+
+	// Middleware function, which will be called for each request
+	func (amw *authenticationMiddleware) Middleware(next http.Handler) http.Handler {
+		return http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+			token := r.Header.Get("X-Session-Token")
+
+			if user, found := amw.tokenUsers[token]; found {
+				// We found the token in our map
+				log.Printf("Authenticated user %s\n", user)
+				next.ServeHTTP(w, r)
+			} else {
+				http.Error(w, "Forbidden", http.StatusForbidden)
+			}
+		})
+	}
+
+	r := mux.NewRouter()
+	r.HandleFunc("/", handler)
+
+	amw := authenticationMiddleware{}
+	amw.Populate()
+
+	r.Use(amw.Middleware)
+
+Note: The handler chain will be stopped if your middleware doesn't call `next.ServeHTTP()` with the corresponding parameters. This can be used to abort a request if the middleware writer wants to.
+
 */
 package mux
diff --git a/vendor/github.com/gorilla/mux/middleware.go b/vendor/github.com/gorilla/mux/middleware.go
new file mode 100644
index 0000000..ceb812c
--- /dev/null
+++ b/vendor/github.com/gorilla/mux/middleware.go
@@ -0,0 +1,72 @@
+package mux
+
+import (
+	"net/http"
+	"strings"
+)
+
+// MiddlewareFunc is a function which receives an http.Handler and returns another http.Handler.
+// Typically, the returned handler is a closure which does something with the http.ResponseWriter and http.Request passed
+// to it, and then calls the handler passed as parameter to the MiddlewareFunc.
+type MiddlewareFunc func(http.Handler) http.Handler
+
+// middleware interface is anything which implements a MiddlewareFunc named Middleware.
+type middleware interface {
+	Middleware(handler http.Handler) http.Handler
+}
+
+// Middleware allows MiddlewareFunc to implement the middleware interface.
+func (mw MiddlewareFunc) Middleware(handler http.Handler) http.Handler {
+	return mw(handler)
+}
+
+// Use appends a MiddlewareFunc to the chain. Middleware can be used to intercept or otherwise modify requests and/or responses, and are executed in the order that they are applied to the Router.
+func (r *Router) Use(mwf ...MiddlewareFunc) {
+	for _, fn := range mwf {
+		r.middlewares = append(r.middlewares, fn)
+	}
+}
+
+// useInterface appends a middleware to the chain. Middleware can be used to intercept or otherwise modify requests and/or responses, and are executed in the order that they are applied to the Router.
+func (r *Router) useInterface(mw middleware) {
+	r.middlewares = append(r.middlewares, mw)
+}
+
+// CORSMethodMiddleware sets the Access-Control-Allow-Methods response header
+// on a request, by matching routes based only on paths. It also handles
+// OPTIONS requests, by settings Access-Control-Allow-Methods, and then
+// returning without calling the next http handler.
+func CORSMethodMiddleware(r *Router) MiddlewareFunc {
+	return func(next http.Handler) http.Handler {
+		return http.HandlerFunc(func(w http.ResponseWriter, req *http.Request) {
+			var allMethods []string
+
+			err := r.Walk(func(route *Route, _ *Router, _ []*Route) error {
+				for _, m := range route.matchers {
+					if _, ok := m.(*routeRegexp); ok {
+						if m.Match(req, &RouteMatch{}) {
+							methods, err := route.GetMethods()
+							if err != nil {
+								return err
+							}
+
+							allMethods = append(allMethods, methods...)
+						}
+						break
+					}
+				}
+				return nil
+			})
+
+			if err == nil {
+				w.Header().Set("Access-Control-Allow-Methods", strings.Join(append(allMethods, "OPTIONS"), ","))
+
+				if req.Method == "OPTIONS" {
+					return
+				}
+			}
+
+			next.ServeHTTP(w, req)
+		})
+	}
+}
diff --git a/vendor/github.com/gorilla/mux/mux.go b/vendor/github.com/gorilla/mux/mux.go
index d66ec38..4bbafa5 100644
--- a/vendor/github.com/gorilla/mux/mux.go
+++ b/vendor/github.com/gorilla/mux/mux.go
@@ -10,7 +10,14 @@
 	"net/http"
 	"path"
 	"regexp"
-	"strings"
+)
+
+var (
+	// ErrMethodMismatch is returned when the method in the request does not match
+	// the method defined against the route.
+	ErrMethodMismatch = errors.New("method is not allowed")
+	// ErrNotFound is returned when no route match is found.
+	ErrNotFound = errors.New("no matching route was found")
 )
 
 // NewRouter returns a new router instance.
@@ -39,6 +46,10 @@
 type Router struct {
 	// Configurable Handler to be used when no route matches.
 	NotFoundHandler http.Handler
+
+	// Configurable Handler to be used when the request method does not match the route.
+	MethodNotAllowedHandler http.Handler
+
 	// Parent route, if this is a subrouter.
 	parent parentRoute
 	// Routes to be matched, in order.
@@ -55,21 +66,51 @@
 	KeepContext bool
 	// see Router.UseEncodedPath(). This defines a flag for all routes.
 	useEncodedPath bool
+	// Slice of middlewares to be called after a match is found
+	middlewares []middleware
 }
 
-// Match matches registered routes against the request.
+// Match attempts to match the given request against the router's registered routes.
+//
+// If the request matches a route of this router or one of its subrouters the Route,
+// Handler, and Vars fields of the the match argument are filled and this function
+// returns true.
+//
+// If the request does not match any of this router's or its subrouters' routes
+// then this function returns false. If available, a reason for the match failure
+// will be filled in the match argument's MatchErr field. If the match failure type
+// (eg: not found) has a registered handler, the handler is assigned to the Handler
+// field of the match argument.
 func (r *Router) Match(req *http.Request, match *RouteMatch) bool {
 	for _, route := range r.routes {
 		if route.Match(req, match) {
+			// Build middleware chain if no error was found
+			if match.MatchErr == nil {
+				for i := len(r.middlewares) - 1; i >= 0; i-- {
+					match.Handler = r.middlewares[i].Middleware(match.Handler)
+				}
+			}
 			return true
 		}
 	}
 
+	if match.MatchErr == ErrMethodMismatch {
+		if r.MethodNotAllowedHandler != nil {
+			match.Handler = r.MethodNotAllowedHandler
+			return true
+		}
+
+		return false
+	}
+
 	// Closest match for a router (includes sub-routers)
 	if r.NotFoundHandler != nil {
 		match.Handler = r.NotFoundHandler
+		match.MatchErr = ErrNotFound
 		return true
 	}
+
+	match.MatchErr = ErrNotFound
 	return false
 }
 
@@ -81,7 +122,7 @@
 	if !r.skipClean {
 		path := req.URL.Path
 		if r.useEncodedPath {
-			path = getPath(req)
+			path = req.URL.EscapedPath()
 		}
 		// Clean path to canonical form and redirect.
 		if p := cleanPath(path); p != path {
@@ -105,12 +146,19 @@
 		req = setVars(req, match.Vars)
 		req = setCurrentRoute(req, match.Route)
 	}
+
+	if handler == nil && match.MatchErr == ErrMethodMismatch {
+		handler = methodNotAllowedHandler()
+	}
+
 	if handler == nil {
 		handler = http.NotFoundHandler()
 	}
+
 	if !r.KeepContext {
 		defer contextClear(req)
 	}
+
 	handler.ServeHTTP(w, req)
 }
 
@@ -128,13 +176,18 @@
 // StrictSlash defines the trailing slash behavior for new routes. The initial
 // value is false.
 //
-// When true, if the route path is "/path/", accessing "/path" will redirect
+// When true, if the route path is "/path/", accessing "/path" will perform a redirect
 // to the former and vice versa. In other words, your application will always
 // see the path as specified in the route.
 //
 // When false, if the route path is "/path", accessing "/path/" will not match
 // this route and vice versa.
 //
+// The re-direct is a HTTP 301 (Moved Permanently). Note that when this is set for
+// routes with a non-idempotent method (e.g. POST, PUT), the subsequent re-directed
+// request will be made as a GET by most clients. Use middleware or client settings
+// to modify this behaviour as needed.
+//
 // Special case: when a route sets a path prefix using the PathPrefix() method,
 // strict slash is ignored for that route because the redirect behavior can't
 // be determined from a prefix alone. However, any subrouters created from that
@@ -160,10 +213,6 @@
 // UseEncodedPath tells the router to match the encoded original path
 // to the routes.
 // For eg. "/path/foo%2Fbar/to" will match the path "/path/{var}/to".
-// This behavior has the drawback of needing to match routes against
-// r.RequestURI instead of r.URL.Path. Any modifications (such as http.StripPrefix)
-// to r.URL.Path will not affect routing when this flag is on and thus may
-// induce unintended behavior.
 //
 // If not called, the router will match the unencoded path to the routes.
 // For eg. "/path/foo%2Fbar/to" will match the path "/path/foo/bar/to"
@@ -176,6 +225,13 @@
 // parentRoute
 // ----------------------------------------------------------------------------
 
+func (r *Router) getBuildScheme() string {
+	if r.parent != nil {
+		return r.parent.getBuildScheme()
+	}
+	return ""
+}
+
 // getNamedRoutes returns the map where named routes are registered.
 func (r *Router) getNamedRoutes() map[string]*Route {
 	if r.namedRoutes == nil {
@@ -299,10 +355,6 @@
 
 func (r *Router) walk(walkFn WalkFunc, ancestors []*Route) error {
 	for _, t := range r.routes {
-		if t.regexp == nil || t.regexp.path == nil || t.regexp.path.template == "" {
-			continue
-		}
-
 		err := walkFn(t, r, ancestors)
 		if err == SkipRouter {
 			continue
@@ -312,10 +364,12 @@
 		}
 		for _, sr := range t.matchers {
 			if h, ok := sr.(*Router); ok {
+				ancestors = append(ancestors, t)
 				err := h.walk(walkFn, ancestors)
 				if err != nil {
 					return err
 				}
+				ancestors = ancestors[:len(ancestors)-1]
 			}
 		}
 		if h, ok := t.handler.(*Router); ok {
@@ -339,6 +393,11 @@
 	Route   *Route
 	Handler http.Handler
 	Vars    map[string]string
+
+	// MatchErr is set to appropriate matching error
+	// It is set to ErrMethodMismatch if there is a mismatch in
+	// the request method and route method
+	MatchErr error
 }
 
 type contextKey int
@@ -380,28 +439,6 @@
 // Helpers
 // ----------------------------------------------------------------------------
 
-// getPath returns the escaped path if possible; doing what URL.EscapedPath()
-// which was added in go1.5 does
-func getPath(req *http.Request) string {
-	if req.RequestURI != "" {
-		// Extract the path from RequestURI (which is escaped unlike URL.Path)
-		// as detailed here as detailed in https://golang.org/pkg/net/url/#URL
-		// for < 1.5 server side workaround
-		// http://localhost/path/here?v=1 -> /path/here
-		path := req.RequestURI
-		path = strings.TrimPrefix(path, req.URL.Scheme+`://`)
-		path = strings.TrimPrefix(path, req.URL.Host)
-		if i := strings.LastIndex(path, "?"); i > -1 {
-			path = path[:i]
-		}
-		if i := strings.LastIndex(path, "#"); i > -1 {
-			path = path[:i]
-		}
-		return path
-	}
-	return req.URL.Path
-}
-
 // cleanPath returns the canonical path for p, eliminating . and .. elements.
 // Borrowed from the net/http package.
 func cleanPath(p string) string {
@@ -458,7 +495,7 @@
 	return m, nil
 }
 
-// mapFromPairsToRegex converts variadic string paramers to a
+// mapFromPairsToRegex converts variadic string parameters to a
 // string to regex map.
 func mapFromPairsToRegex(pairs ...string) (map[string]*regexp.Regexp, error) {
 	length, err := checkPairs(pairs...)
@@ -540,3 +577,12 @@
 	}
 	return true
 }
+
+// methodNotAllowed replies to the request with an HTTP status code 405.
+func methodNotAllowed(w http.ResponseWriter, r *http.Request) {
+	w.WriteHeader(http.StatusMethodNotAllowed)
+}
+
+// methodNotAllowedHandler returns a simple request handler
+// that replies to each request with a status code 405.
+func methodNotAllowedHandler() http.Handler { return http.HandlerFunc(methodNotAllowed) }
diff --git a/vendor/github.com/gorilla/mux/regexp.go b/vendor/github.com/gorilla/mux/regexp.go
index 0189ad3..2b57e56 100644
--- a/vendor/github.com/gorilla/mux/regexp.go
+++ b/vendor/github.com/gorilla/mux/regexp.go
@@ -14,6 +14,20 @@
 	"strings"
 )
 
+type routeRegexpOptions struct {
+	strictSlash    bool
+	useEncodedPath bool
+}
+
+type regexpType int
+
+const (
+	regexpTypePath   regexpType = 0
+	regexpTypeHost   regexpType = 1
+	regexpTypePrefix regexpType = 2
+	regexpTypeQuery  regexpType = 3
+)
+
 // newRouteRegexp parses a route template and returns a routeRegexp,
 // used to match a host, a path or a query string.
 //
@@ -24,7 +38,7 @@
 // Previously we accepted only Python-like identifiers for variable
 // names ([a-zA-Z_][a-zA-Z0-9_]*), but currently the only restriction is that
 // name and pattern can't be empty, and names can't contain a colon.
-func newRouteRegexp(tpl string, matchHost, matchPrefix, matchQuery, strictSlash, useEncodedPath bool) (*routeRegexp, error) {
+func newRouteRegexp(tpl string, typ regexpType, options routeRegexpOptions) (*routeRegexp, error) {
 	// Check if it is well-formed.
 	idxs, errBraces := braceIndices(tpl)
 	if errBraces != nil {
@@ -34,19 +48,18 @@
 	template := tpl
 	// Now let's parse it.
 	defaultPattern := "[^/]+"
-	if matchQuery {
-		defaultPattern = "[^?&]*"
-	} else if matchHost {
+	if typ == regexpTypeQuery {
+		defaultPattern = ".*"
+	} else if typ == regexpTypeHost {
 		defaultPattern = "[^.]+"
-		matchPrefix = false
 	}
 	// Only match strict slash if not matching
-	if matchPrefix || matchHost || matchQuery {
-		strictSlash = false
+	if typ != regexpTypePath {
+		options.strictSlash = false
 	}
 	// Set a flag for strictSlash.
 	endSlash := false
-	if strictSlash && strings.HasSuffix(tpl, "/") {
+	if options.strictSlash && strings.HasSuffix(tpl, "/") {
 		tpl = tpl[:len(tpl)-1]
 		endSlash = true
 	}
@@ -88,16 +101,16 @@
 	// Add the remaining.
 	raw := tpl[end:]
 	pattern.WriteString(regexp.QuoteMeta(raw))
-	if strictSlash {
+	if options.strictSlash {
 		pattern.WriteString("[/]?")
 	}
-	if matchQuery {
+	if typ == regexpTypeQuery {
 		// Add the default pattern if the query value is empty
 		if queryVal := strings.SplitN(template, "=", 2)[1]; queryVal == "" {
 			pattern.WriteString(defaultPattern)
 		}
 	}
-	if !matchPrefix {
+	if typ != regexpTypePrefix {
 		pattern.WriteByte('$')
 	}
 	reverse.WriteString(raw)
@@ -118,15 +131,13 @@
 
 	// Done!
 	return &routeRegexp{
-		template:       template,
-		matchHost:      matchHost,
-		matchQuery:     matchQuery,
-		strictSlash:    strictSlash,
-		useEncodedPath: useEncodedPath,
-		regexp:         reg,
-		reverse:        reverse.String(),
-		varsN:          varsN,
-		varsR:          varsR,
+		template:   template,
+		regexpType: typ,
+		options:    options,
+		regexp:     reg,
+		reverse:    reverse.String(),
+		varsN:      varsN,
+		varsR:      varsR,
 	}, nil
 }
 
@@ -135,15 +146,10 @@
 type routeRegexp struct {
 	// The unmodified template.
 	template string
-	// True for host match, false for path or query string match.
-	matchHost bool
-	// True for query string match, false for path and host match.
-	matchQuery bool
-	// The strictSlash value defined on the route, but disabled if PathPrefix was used.
-	strictSlash bool
-	// Determines whether to use encoded path from getPath function or unencoded
-	// req.URL.Path for path matching
-	useEncodedPath bool
+	// The type of match
+	regexpType regexpType
+	// Options for matching
+	options routeRegexpOptions
 	// Expanded regexp.
 	regexp *regexp.Regexp
 	// Reverse template.
@@ -156,13 +162,13 @@
 
 // Match matches the regexp against the URL host or path.
 func (r *routeRegexp) Match(req *http.Request, match *RouteMatch) bool {
-	if !r.matchHost {
-		if r.matchQuery {
+	if r.regexpType != regexpTypeHost {
+		if r.regexpType == regexpTypeQuery {
 			return r.matchQueryString(req)
 		}
 		path := req.URL.Path
-		if r.useEncodedPath {
-			path = getPath(req)
+		if r.options.useEncodedPath {
+			path = req.URL.EscapedPath()
 		}
 		return r.regexp.MatchString(path)
 	}
@@ -178,6 +184,9 @@
 		if !ok {
 			return "", fmt.Errorf("mux: missing route variable %q", v)
 		}
+		if r.regexpType == regexpTypeQuery {
+			value = url.QueryEscape(value)
+		}
 		urlValues[k] = value
 	}
 	rv := fmt.Sprintf(r.reverse, urlValues...)
@@ -200,7 +209,7 @@
 // For a URL with foo=bar&baz=ding, we return only the relevant key
 // value pair for the routeRegexp.
 func (r *routeRegexp) getURLQuery(req *http.Request) string {
-	if !r.matchQuery {
+	if r.regexpType != regexpTypeQuery {
 		return ""
 	}
 	templateKey := strings.SplitN(r.template, "=", 2)[0]
@@ -269,7 +278,7 @@
 	}
 	path := req.URL.Path
 	if r.useEncodedPath {
-		path = getPath(req)
+		path = req.URL.EscapedPath()
 	}
 	// Store path variables.
 	if v.path != nil {
@@ -277,7 +286,7 @@
 		if len(matches) > 0 {
 			extractVars(path, matches, v.path.varsN, m.Vars)
 			// Check if we should redirect.
-			if v.path.strictSlash {
+			if v.path.options.strictSlash {
 				p1 := strings.HasSuffix(path, "/")
 				p2 := strings.HasSuffix(v.path.template, "/")
 				if p1 != p2 {
diff --git a/vendor/github.com/gorilla/mux/route.go b/vendor/github.com/gorilla/mux/route.go
index 9221915..a591d73 100644
--- a/vendor/github.com/gorilla/mux/route.go
+++ b/vendor/github.com/gorilla/mux/route.go
@@ -31,6 +31,8 @@
 	skipClean bool
 	// If true, "/path/foo%2Fbar/to" will match the path "/path/{var}/to"
 	useEncodedPath bool
+	// The scheme used when building URLs.
+	buildScheme string
 	// If true, this route never matches: it is only used to build URLs.
 	buildOnly bool
 	// The name used to build URLs.
@@ -41,6 +43,8 @@
 	buildVarsFunc BuildVarsFunc
 }
 
+// SkipClean reports whether path cleaning is enabled for this route via
+// Router.SkipClean.
 func (r *Route) SkipClean() bool {
 	return r.skipClean
 }
@@ -50,12 +54,33 @@
 	if r.buildOnly || r.err != nil {
 		return false
 	}
+
+	var matchErr error
+
 	// Match everything.
 	for _, m := range r.matchers {
 		if matched := m.Match(req, match); !matched {
+			if _, ok := m.(methodMatcher); ok {
+				matchErr = ErrMethodMismatch
+				continue
+			}
+			matchErr = nil
 			return false
 		}
 	}
+
+	if matchErr != nil {
+		match.MatchErr = matchErr
+		return false
+	}
+
+	if match.MatchErr == ErrMethodMismatch {
+		// We found a route which matches request method, clear MatchErr
+		match.MatchErr = nil
+		// Then override the mis-matched handler
+		match.Handler = r.handler
+	}
+
 	// Yay, we have a match. Let's collect some info about it.
 	if match.Route == nil {
 		match.Route = r
@@ -66,6 +91,7 @@
 	if match.Vars == nil {
 		match.Vars = make(map[string]string)
 	}
+
 	// Set variables.
 	if r.regexp != nil {
 		r.regexp.setMatch(req, match, r)
@@ -147,20 +173,23 @@
 }
 
 // addRegexpMatcher adds a host or path matcher and builder to a route.
-func (r *Route) addRegexpMatcher(tpl string, matchHost, matchPrefix, matchQuery bool) error {
+func (r *Route) addRegexpMatcher(tpl string, typ regexpType) error {
 	if r.err != nil {
 		return r.err
 	}
 	r.regexp = r.getRegexpGroup()
-	if !matchHost && !matchQuery {
-		if tpl == "/" && (len(tpl) == 0 || tpl[0] != '/') {
+	if typ == regexpTypePath || typ == regexpTypePrefix {
+		if len(tpl) > 0 && tpl[0] != '/' {
 			return fmt.Errorf("mux: path must start with a slash, got %q", tpl)
 		}
 		if r.regexp.path != nil {
 			tpl = strings.TrimRight(r.regexp.path.template, "/") + tpl
 		}
 	}
-	rr, err := newRouteRegexp(tpl, matchHost, matchPrefix, matchQuery, r.strictSlash, r.useEncodedPath)
+	rr, err := newRouteRegexp(tpl, typ, routeRegexpOptions{
+		strictSlash:    r.strictSlash,
+		useEncodedPath: r.useEncodedPath,
+	})
 	if err != nil {
 		return err
 	}
@@ -169,7 +198,7 @@
 			return err
 		}
 	}
-	if matchHost {
+	if typ == regexpTypeHost {
 		if r.regexp.path != nil {
 			if err = uniqueVars(rr.varsN, r.regexp.path.varsN); err != nil {
 				return err
@@ -182,7 +211,7 @@
 				return err
 			}
 		}
-		if matchQuery {
+		if typ == regexpTypeQuery {
 			r.regexp.queries = append(r.regexp.queries, rr)
 		} else {
 			r.regexp.path = rr
@@ -234,7 +263,8 @@
 //               "X-Requested-With", "XMLHttpRequest")
 //
 // The above route will only match if both the request header matches both regular expressions.
-// It the value is an empty string, it will match any value if the key is set.
+// If the value is an empty string, it will match any value if the key is set.
+// Use the start and end of string anchors (^ and $) to match an exact value.
 func (r *Route) HeadersRegexp(pairs ...string) *Route {
 	if r.err == nil {
 		var headers map[string]*regexp.Regexp
@@ -264,7 +294,7 @@
 // Variable names must be unique in a given route. They can be retrieved
 // calling mux.Vars(request).
 func (r *Route) Host(tpl string) *Route {
-	r.err = r.addRegexpMatcher(tpl, true, false, false)
+	r.err = r.addRegexpMatcher(tpl, regexpTypeHost)
 	return r
 }
 
@@ -324,7 +354,7 @@
 // Variable names must be unique in a given route. They can be retrieved
 // calling mux.Vars(request).
 func (r *Route) Path(tpl string) *Route {
-	r.err = r.addRegexpMatcher(tpl, false, false, false)
+	r.err = r.addRegexpMatcher(tpl, regexpTypePath)
 	return r
 }
 
@@ -340,7 +370,7 @@
 // Also note that the setting of Router.StrictSlash() has no effect on routes
 // with a PathPrefix matcher.
 func (r *Route) PathPrefix(tpl string) *Route {
-	r.err = r.addRegexpMatcher(tpl, false, true, false)
+	r.err = r.addRegexpMatcher(tpl, regexpTypePrefix)
 	return r
 }
 
@@ -371,7 +401,7 @@
 		return nil
 	}
 	for i := 0; i < length; i += 2 {
-		if r.err = r.addRegexpMatcher(pairs[i]+"="+pairs[i+1], false, false, true); r.err != nil {
+		if r.err = r.addRegexpMatcher(pairs[i]+"="+pairs[i+1], regexpTypeQuery); r.err != nil {
 			return r
 		}
 	}
@@ -394,6 +424,9 @@
 	for k, v := range schemes {
 		schemes[k] = strings.ToLower(v)
 	}
+	if r.buildScheme == "" && len(schemes) > 0 {
+		r.buildScheme = schemes[0]
+	}
 	return r.addMatcher(schemeMatcher(schemes))
 }
 
@@ -477,22 +510,33 @@
 		return nil, err
 	}
 	var scheme, host, path string
+	queries := make([]string, 0, len(r.regexp.queries))
 	if r.regexp.host != nil {
-		// Set a default scheme.
-		scheme = "http"
 		if host, err = r.regexp.host.url(values); err != nil {
 			return nil, err
 		}
+		scheme = "http"
+		if s := r.getBuildScheme(); s != "" {
+			scheme = s
+		}
 	}
 	if r.regexp.path != nil {
 		if path, err = r.regexp.path.url(values); err != nil {
 			return nil, err
 		}
 	}
+	for _, q := range r.regexp.queries {
+		var query string
+		if query, err = q.url(values); err != nil {
+			return nil, err
+		}
+		queries = append(queries, query)
+	}
 	return &url.URL{
-		Scheme: scheme,
-		Host:   host,
-		Path:   path,
+		Scheme:   scheme,
+		Host:     host,
+		Path:     path,
+		RawQuery: strings.Join(queries, "&"),
 	}, nil
 }
 
@@ -514,10 +558,14 @@
 	if err != nil {
 		return nil, err
 	}
-	return &url.URL{
+	u := &url.URL{
 		Scheme: "http",
 		Host:   host,
-	}, nil
+	}
+	if s := r.getBuildScheme(); s != "" {
+		u.Scheme = s
+	}
+	return u, nil
 }
 
 // URLPath builds the path part of the URL for a route. See Route.URL().
@@ -558,6 +606,74 @@
 	return r.regexp.path.template, nil
 }
 
+// GetPathRegexp returns the expanded regular expression used to match route path.
+// This is useful for building simple REST API documentation and for instrumentation
+// against third-party services.
+// An error will be returned if the route does not define a path.
+func (r *Route) GetPathRegexp() (string, error) {
+	if r.err != nil {
+		return "", r.err
+	}
+	if r.regexp == nil || r.regexp.path == nil {
+		return "", errors.New("mux: route does not have a path")
+	}
+	return r.regexp.path.regexp.String(), nil
+}
+
+// GetQueriesRegexp returns the expanded regular expressions used to match the
+// route queries.
+// This is useful for building simple REST API documentation and for instrumentation
+// against third-party services.
+// An error will be returned if the route does not have queries.
+func (r *Route) GetQueriesRegexp() ([]string, error) {
+	if r.err != nil {
+		return nil, r.err
+	}
+	if r.regexp == nil || r.regexp.queries == nil {
+		return nil, errors.New("mux: route doesn't have queries")
+	}
+	var queries []string
+	for _, query := range r.regexp.queries {
+		queries = append(queries, query.regexp.String())
+	}
+	return queries, nil
+}
+
+// GetQueriesTemplates returns the templates used to build the
+// query matching.
+// This is useful for building simple REST API documentation and for instrumentation
+// against third-party services.
+// An error will be returned if the route does not define queries.
+func (r *Route) GetQueriesTemplates() ([]string, error) {
+	if r.err != nil {
+		return nil, r.err
+	}
+	if r.regexp == nil || r.regexp.queries == nil {
+		return nil, errors.New("mux: route doesn't have queries")
+	}
+	var queries []string
+	for _, query := range r.regexp.queries {
+		queries = append(queries, query.template)
+	}
+	return queries, nil
+}
+
+// GetMethods returns the methods the route matches against
+// This is useful for building simple REST API documentation and for instrumentation
+// against third-party services.
+// An error will be returned if route does not have methods.
+func (r *Route) GetMethods() ([]string, error) {
+	if r.err != nil {
+		return nil, r.err
+	}
+	for _, m := range r.matchers {
+		if methods, ok := m.(methodMatcher); ok {
+			return []string(methods), nil
+		}
+	}
+	return nil, errors.New("mux: route doesn't have methods")
+}
+
 // GetHostTemplate returns the template used to build the
 // route match.
 // This is useful for building simple REST API documentation and for instrumentation
@@ -599,11 +715,22 @@
 
 // parentRoute allows routes to know about parent host and path definitions.
 type parentRoute interface {
+	getBuildScheme() string
 	getNamedRoutes() map[string]*Route
 	getRegexpGroup() *routeRegexpGroup
 	buildVars(map[string]string) map[string]string
 }
 
+func (r *Route) getBuildScheme() string {
+	if r.buildScheme != "" {
+		return r.buildScheme
+	}
+	if r.parent != nil {
+		return r.parent.getBuildScheme()
+	}
+	return ""
+}
+
 // getNamedRoutes returns the map where named routes are registered.
 func (r *Route) getNamedRoutes() map[string]*Route {
 	if r.parent == nil {
diff --git a/vendor/github.com/gorilla/mux/test_helpers.go b/vendor/github.com/gorilla/mux/test_helpers.go
new file mode 100644
index 0000000..32ecffd
--- /dev/null
+++ b/vendor/github.com/gorilla/mux/test_helpers.go
@@ -0,0 +1,19 @@
+// Copyright 2012 The Gorilla Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package mux
+
+import "net/http"
+
+// SetURLVars sets the URL variables for the given request, to be accessed via
+// mux.Vars for testing route behaviour. Arguments are not modified, a shallow
+// copy is returned.
+//
+// This API should only be used for testing purposes; it provides a way to
+// inject variables into the request context. Alternatively, URL variables
+// can be set by making a route that captures the required variables,
+// starting a server and sending the request to that server.
+func SetURLVars(r *http.Request, val map[string]string) *http.Request {
+	return setVars(r, val)
+}