diff --git a/testing/acceptance_specification.rst b/testing/acceptance_specification.rst
new file mode 100644
index 0000000..e1c8482
--- /dev/null
+++ b/testing/acceptance_specification.rst
@@ -0,0 +1,332 @@
+..
+   SPDX-FileCopyrightText: © 2020 Open Networking Foundation <support@opennetworking.org>
+   SPDX-License-Identifier: Apache-2.0
+
+Acceptance Specification
+========================
+
+Objectives
+----------
+
+The purpose of this document is to create an end-user test object list (TOL)
+for Aether Connected Edge (ACE).
+
+This document will focus on the connectivity services end-user testing.  In the
+future, this document will extend to other services offered through ACE.
+
+The Automated continuous testing framework for the platform is out of the scope of this document.
+
+Integration Test (eNB-LTE Core)
+-------------------------------
+
+Before we start to test End-to-End connectivity, we have to check the
+connection (called S1-MME/S1-C interface) between eNB in an edge and MME in a
+public cloud.
+
+In order to verify this connectivity, the following test cases should be passed.
+
+Note that all the following test/verification cases have some assumptions:
+
+1. eNB is connected to the Fabric switch;
+2. eNB has correct network configurations;
+3. eNB has correct ID configurations provided by the ONF PMFE team.
+
+IT-TOL01 Fabric Test 1: the connectivity test within the edge
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+In order to test the fabric test, please see the following steps:
+
+
++----------------------------------------------+------------------------------------+
+|Steps                                         |Expected Outcome                    |
++----------------------------------------------+------------------------------------+
+|1. Access to the eNB* (through SSH or Web GUI)|Able to get ICMP reply(PING reply)  |
+|                                              |from the GCP node.                  |
+|                                              |                                    |
+|2. Ping to "10.168.0.6" eNB S1-MME/S1-C       |( )YES  ( )NO                       |
+|   interface IP address*                      |                                    |
+|                                              |Comments:                           |
++----------------------------------------------+------------------------------------+
+
+.. note::
+   it depends on the eNB device. Some eNBs have a single network interface for the management network, S1-U, and S1-C,
+   while other eNBs have separate interfaces. The former eNB type has a single IP address,
+   and the later eNB type has multiple IP addresses for each interface.
+
+IT-TOL02 Fabric Test 2: the connectivity test between the eNB and the public cloud
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+In order to test the fabric test, please see the following steps:
+
+
++----------------------------------------------+------------------------------------+
+|Steps                                         |Expected Outcome                    |
++----------------------------------------------+------------------------------------+
+|1. Access to the eNB* (through SSH or Web GUI)|Able to get ICMP reply(PING reply)  |
+|                                              |from the GCP node.                  |
+|                                              |                                    |
+|2. Ping to "10.168.0.6"                       |( )YES   ( )NO                      |
+|                                              |                                    |
+|                                              |Comments:                           |
++----------------------------------------------+------------------------------------+
+
+
+
+.. note::
+   it also depends on the eNB device. Some eNBs allow us to SSH into their device, other eNBs provide the PING tool through Web GUI.
+   Of course, some eNBs do not support both. In that case, it is okay to skip this test case.
+
+
+IT-TOL03 SCTP Connection Verification
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+In order to verify the SCTP connection between MME and eNB, please see the following steps:
+
+
++----------------------------------------------+------------------------------------+
+|Steps                                         |Expected Outcome                    |
++----------------------------------------------+------------------------------------+
+|1. SSH to the gateway device* for the eNB     |Able to see Heart Beat              |
+|   S1-MME/S1-C traffic                        |messages                            |
+|                                              |                                    |
+|2. Capture the traffic with Wireshark         |( )YES    ()NO                      |
+|   or the command: `sudo tcpdump -i any sctp` |                                    |
+|                                              |Comments:                           |
++----------------------------------------------+------------------------------------+
+
+Capture the traffic with Wireshark or the command: `sudo tcpdump -i any sctp`
+
+.. note::
+   the eNB should have the gateway IP address for the S1-MME/S1-C traffic.
+   You can SSH there with the gateway IP address in the eNB and capture the traffic.
+   Normally, the gateway device can be one of those devices: (i) VPN router; (ii) Firewall device in between VPN router and the edge;
+   (iii) one of edge servers.
+
+IT-TOL04 PLMN Verification
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+In order to verify the TAC number, please see the following steps:
+
+
+Able to see the correct MCC and MNC values*
+
++-------------------------------------------------+------------------------------------+
+|Steps                                            |Expected Outcome                    |
++-------------------------------------------------+------------------------------------+
+|1. SSH to the gateway device for the eNB         |Able to see the correct MCC and MNC |
+|   S1-MME/S1-C traffic                           |values                              |
+|                                                 |                                    |
+|2. Start to capture the traffic with Wireshark   |( )YES    ()NO                      |
+|   or the command: `sudo tcpdump -i any sctp     |                                    |
+|   -w FileName.pcap`                             |Comments:                           |
+|3. Reboot eNB                                    |                                    |
+|                                                 |                                    |
+|4. Wait until FileName.pcap has `S1SetupRequest` |                                    |
+|   S1SetupResponse messages                      |                                    |
+|                                                 |                                    |
+|5. Stop the packet capturing and open            |                                    |
+|   the FileName.pcap                             |                                    |
+|                                                 |                                    |
+|6. Find out the S1SetupRequest message and       |                                    |
+|   open the detailed packet information          |                                    |
+|                                                 |                                    |
+|7. Go to "Item 2: id-SupportedTAs"  section      |                                    |
+|   and check "MACC and "MNC" values              |                                    |
++-------------------------------------------------+------------------------------------+
+
+Example (the MCC is 315 and MNC is 010)
+
+.. image:: images/it-tol04.png
+  :width: 840
+  :height: 840
+  :alt: Example (the MCC is 315 and MNC is 010)
+
+IT-TOL05 TAC Number Verification
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+
++-------------------------------------------------+------------------------------------+
+|Steps                                            |Expected Outcome                    |
++-------------------------------------------------+------------------------------------+
+|1. SSH to the gateway device for the eNB         |Able to see the correct TAC number  |
+|   S1-MME/S1-C traffic                           |                                    |
+|                                                 |                                    |
+|2. Start to capture the traffic with Wireshark   |( )YES    ()NO                      |
+|   or the command: `sudo tcpdump -i any sctp     |                                    |
+|   -w FileName.pcap`                             |Comments:                           |
+|3. Reboot eNB                                    |                                    |
+|                                                 |                                    |
+|4. Wait until FileName.pcap has `S1SetupRequest` |                                    |
+|   S1SetupResponse messages                      |                                    |
+|                                                 |                                    |
+|5. Stop the packet capturing and open            |                                    |
+|   the FileName.pcap                             |                                    |
+|                                                 |                                    |
+|6. Find out the S1SetupRequest message and       |                                    |
+|   open the detailed packet information          |                                    |
+|                                                 |                                    |
+|7. Go to "Item 0: id-SupportedTAs" section       |                                    |
+|   and check TAC "                               |                                    |
++-------------------------------------------------+------------------------------------+
+
+.. note::
+   if you already captured packets in IT-TOL03, you can skip steps from 1 to 5.
+   Just you can check the expected outcome with the file you captured at IT-TOL03.
+
+Example (the TAC number is 19)
+
+.. image:: images/it-tol05.png
+  :width: 840
+  :height: 840
+  :alt: Example (the TAC number is 19)
+
+IT-TOL06 eNB Verification
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+In order to test the eNB, please see the following steps:
+
++-------------------------------------------------+------------------------------------+
+|Steps                                            |Expected Outcome                    |
++-------------------------------------------------+------------------------------------+
+|1. SSH to the gateway device for the eNB         |Able to see the correct eNBID       |
+|   S1-MME/S1-C traffic                           |                                    |
+|                                                 |                                    |
+|2. Start to capture the traffic with Wireshark   |( )YES    ()NO                      |
+|   or the command: `sudo tcpdump -i any sctp     |                                    |
+|   -w FileName.pcap`                             |Comments:                           |
+|3. Reboot eNB                                    |                                    |
+|                                                 |                                    |
+|4. Wait until FileName.pcap has `S1SetupRequest` |                                    |
+|   S1SetupResponse messages                      |                                    |
+|                                                 |                                    |
+|5. Stop the packet capturing and open            |                                    |
+|   the FileName.pcap                             |                                    |
+|                                                 |                                    |
+|6. Find out the S1SetupRequest message and       |                                    |
+|   open the detailed packet information          |                                    |
+|                                                 |                                    |
+|7. Go to "Item 0: id-Global-eNB-ID" section      |                                    |
+|   and check "eNB-ID: macroENB-ID"               |                                    |
++-------------------------------------------------+------------------------------------+
+
+.. note::
+   if you already captured packets in IT-TOL03, you can skip steps number 1 to 5.
+   Just you can check the expected outcome with the file you captured at IT-TOL03.
+
+Example (the eNB ID is 19)
+
+.. image:: images/it-tol06.png
+  :width: 840
+  :height: 840
+  :alt: Example (the eNB ID is 19)
+
+Connectivity Services
+---------------------
+
+Aether provides only data connectivity for end-user devices and systems.
+So the voice service over LTE is not available. However, users can use
+any OTT services over the Aether network for voice connectivity.
+
+The test specifications are only covering the data connectivity focused tests.
+
+
+CS-TOL01 Device Attach/Connect
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+To test device can attach to Aether network
+
+
++----------------------------------------------+------------------------------------+
+|Steps                                         |Expected Outcome                    |
++----------------------------------------------+------------------------------------+
+|1. Turn off the mobile device                 |Able to attach the device and       |
+|                                              |connect to the internet/Aether      |
+|2. Turn on the mobile device                  |Network                             |
+|                                              |                                    |
+|3. Check whether the device is showing        |( )YES  ( )NO                       |
+|   connected on the status, depending on      |                                    |
+|   the device it will show "Aether" or        |                                    |
+|   "MCCMNC" format.                           |                                    |
+|4. Browse http://www.google.com/?             |( )YES  ( )NO                       |
+|   From the device web browser                |                                    |
+|                                              |Comments:                           |
++----------------------------------------------+------------------------------------+
+
+CS-TOL02 Device Detach/Disconnect
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+To test device can detach/disconnected by user initiation
+
+
++----------------------------------------------+------------------------------------+
+|Steps                                         |Expected Outcome                    |
++----------------------------------------------+------------------------------------+
+|1. Make sure the device is connected to Aether|Able to detach the device and       |
+|                                              |disconnect from the internet/Aether |
+|2. Deselect the network (or forget the network|Network                             |
+|   , depending on device configuration)       |                                    |
+|3. Try to browse http://www.google.com/?      |( )YES  ( )NO                       |
+|   From your web browser                      |                                    |
+|                                              |Comments:                           |
++----------------------------------------------+------------------------------------+
+
+
+CS-TOL03 Bandwidth Test - Internet
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+To test bandwidth available to a mobile device over Aether network.
+
+Please note the following, the bandwidth test depends on the eNB hardware,
+your local breakout bandwidth, and the overall radio environment.
+If you face an unexpected result, please explain it in the comment section in the outcome column.
+
+
++----------------------------------------------+------------------------------------+
+|Steps                                         |Expected Outcome                    |
++----------------------------------------------+------------------------------------+
+|1. Open Speedtest app from your mobile device |Expected Bandwidth/Throughput       |
+|                                              |observed                            |
+|                                              |                                    |
+|2. Run Speedtest 3 times, take the average as |( )YES  ( )NO                       |
+|   the final result                           |                                    |
+|                                              |Comments:                           |
++----------------------------------------------+------------------------------------+
+
+
+CS-TOL04 Bandwidth Test - Edge Application
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+To test bandwidth available to a mobile device over Aether network.
+
+Please note the following, the bandwidth test depends on the eNB hardware,
+your local breakout bandwidth, and the overall radio environment. If you face an unexpected result,
+please explain it in the comment section in the outcome column.
+
+
++----------------------------------------------+------------------------------------+
+|Steps                                         |Expected Outcome                    |
++----------------------------------------------+------------------------------------+
+|1. Initiate FTP Download from a local server  |Expected Bandwidth/Throughput       |
+|   (same location) connected to the enterprise|observed                            |
+|   network (through local breakout)           |                                    |
+|                                              |                                    |
+|2. Download 3 times, take the average as the  |( )YES  ( )NO                       |
+|   final result                               |                                    |
+|                                              |Comments:                           |
++----------------------------------------------+------------------------------------+
+
+
+
+Monitoring Services
+-------------------
+
+ACE uses the Grafana dashboard for monitoring services.
+Each ACE will be provided with Read-Only Access to our centralized monitoring platform.
+
+
+Application Services
+--------------------
+
+Aether uses Rancher to onboard applications to ACE.
+Each ACE host will be provided with access to rancher to onboard applications on their ACE cluster.
+