diff --git a/configuration/network.rst b/configuration/network.rst
index 14efe64..dbe6426 100644
--- a/configuration/network.rst
+++ b/configuration/network.rst
@@ -1,3 +1,5 @@
+.. _onos_network_config:
+
 Network Configuration
 =====================
 SD-Fabric uses several different types of network configurations.
diff --git a/deployment.rst b/deployment.rst
index 66bbe30..a0eda5b 100644
--- a/deployment.rst
+++ b/deployment.rst
@@ -5,9 +5,40 @@
 Deployment Guide
 ================
 
+Deployment Overview
+-------------------
+SD-Fabric is released with Helm chart and container images.
+We recommend using **Kubernetes** and **Helm** to deploy SD-Fabric.
+Here's a list of high level steps required to deploy SD-Fabric:
 
-Provision Switches
-------------------
+1. **Provision switch**
+
+   We first need to install operating system with Docker and Kubernetes on the bare-metal switches.
+
+2. **Prepare switches as special Kubernetes nodes**
+
+   Kubernetes ``label`` and ``taint`` are used to configure switches as special Kubernetes worker nodes.
+   This is to make sure we deploy Stratum (and only Stratum) on switches.
+
+3. **Prepare access credential for SD-Fabric images**
+
+   SD-Fabric images are hosted on an ONF member-only Docker registry.
+   You need to obtain access token and supply that as part of the Helm value in Step 6.
+
+4. **Prepare ONOS network configuration**
+
+   Network configuration defines properties such as switch pipeconf, subnet and VLAN.
+
+5. **Prepare Stratum chassis configuration for each switch**
+
+   Chassis config defines switch properties such as port speed and breakout.
+
+6. **Install SD-Fabric** using Helm
+
+   Finally, we are going to install SD-Fabric with the information we prepared in Step 1 to 5.
+
+Step 1: Provision Switches
+--------------------------
 
 We follow Open Network Install Environment(ONIE) way to install Open Network Linux (ONL) image to switch.
 To work with the SD-Fabric environment, we have customized the ONL image to support related packages and dependencies.
@@ -49,8 +80,8 @@
 4. Setup switch IP and hostname after the installation.
 
 
-Kubernetes Environment
-----------------------
+Step 2: Configure switches as special Kubernetes nodes
+------------------------------------------------------
 
 Our `ONL <https://github.com/opennetworkinglab/OpenNetworkLinux>`_ version
 includes all packages required by running the Kubernetes on top of it.
@@ -83,16 +114,8 @@
      leaf2   Ready    worker   27d   v1.18.8
 
 
-Please follow the :ref:`Install SD-Fabric section <install_sd_fabric>` to
-check how to use Taint and NodeSelector during installation.
-
-
-# TODO
-Build Image
------------
-
-Fetch Images From Private Registry
-----------------------------------
+Step 3: Prepare access credential for SD-Fabric images
+------------------------------------------------------
 
 Container images can be download from ONF self-hosted container registry but you have to gain the access token first.
 
@@ -108,107 +131,18 @@
       Password:
       Login Succeeded
 
+Step 4: Prepare ONOS network configuration
+------------------------------------------
+   See :ref:`onos_network_config` for instructions
 
-Please follow the :ref:`Install SD-Fabric section <install_sd_fabric>` to
-check how to use Taint and NodeSelector during installation.
+Step 5: Prepare Stratum chassis configuration
+---------------------------------------------
+   See See :ref:`stratum_chassis_config` for instructions
 
 .. _install_sd_fabric:
 
-Install SD-Fabric
------------------
+Step 6: Install SD-Fabric with Helm
+-----------------------------------
 
 To install SD-Fabric into your Kubernetes cluster, follow instructions
-described on the `SD-Fabric Helm Chart Repository <https://gerrit.opencord.org/plugins/gitiles/sdfabric-helm-charts/+/HEAD/sdfabric/README.md>`_
-
-A workflow to install the SD-Fabric should be look like
-
-1. Clone the Helm Charts files from the `SD-Fabric Helm Chart Repository <https://gerrit.opencord.org/plugins/gitiles/sdfabric-helm-charts/+/HEAD/sdfabric/README.md>`_
-2. Customize the value file based on your environment
-3. Deploy it via Helm command
-
-Below is an example how to install SD-Fabric
-
-.. note::
-    Please ensure you have installed switch into Kubernetes cluster and have configured them with proper taints and label,
-    and have the permission to fetch the container image from the `Aether Harbor Registry <https://registry.aetherproject.org/harbor/sign-in?redirect_url=%2Fharbor%2Fprojects>`_.
-
-
-1. Use the git command to clone the `SD-Fabric Helm Chart Repository <https://gerrit.opencord.org/plugins/gitiles/sdfabric-helm-charts/+/HEAD/sdfabric/README.md>`_
-2. Update dependencies
-
-.. code-block::
-
-      ╰─$ cd sdfabric
-      ╰─$ helm dep update                                                                                                                                                                                                              146 ↵
-      Downloading onos-classic from repo https://charts.onosproject.org
-      Downloading stratum from repo https://charts.stratumproject.org/
-      Deleting outdated charts
-
-3. Prepare your value file, you can modify an existing ``values.yaml`` or use a standalone
-value file, use the later approach in this example.
-
-.. code-block::
-
-      ╰─$ cat myvaules.yaml
-      image:
-         credential:
-            username: my_username
-            password: my_access_token
-
-      onos-classic:
-         config:
-            netcfg: >
-               {
-               "devices": {
-                  "device:leaf1": {
-                     "segmentrouting": {
-                     "ipv4NodeSid": 101,
-                     "ipv4Loopback": "10.11.22.33",
-                     "routerMac": "aa:bb:cc:dd:ee:ff",
-                     "pairDeviceId" : "device:leaf2",
-                     "pairLocalPort" : 260,
-                     "isEdgeRouter": true,
-                     "adjacencySids": []
-                     }
-                  }
-               }
-            }
-
-
-      stratum:
-         nodeSelector:
-            node-role.kubernetes.io: switch
-
-         tolerations:
-            - effect: NoSchedule
-               value: switch
-               key: node-role.kubernetes.io
-
-Please pay attention to the following fields.
-
-   * Configure your ``registry username and password`` on image.credential
-   * Configure the ``label`` on stratum.nodeSelector
-   * Configure the ``taint`` on stratum.tolerations
-   * Configure the ``network configuration`` on onos-classic.config.netcfg
-
-4. Verify your Configuration to ensure no YAML/Helm syntax errors
-
-.. code-block::
-
-      ╰─$ helm template -f myvaules.yaml .
-
-5. Using the helm command to install it. (``helm version is above v3.2``)
-Following command will install the release `sdfabric` to namespace `sdfabric`.
-
-.. code-block::
-
-      ╰─$ helm install -n sdfabric --create-namespace -f myvaules.yaml sdfabric .
-      NAME: sdfabric
-      LAST DEPLOYED: Mon Oct 11 11:12:59 2021
-      NAMESPACE: sdfabric
-      STATUS: deployed
-      REVISION: 1
-      TEST SUITE: None
-      ╰─$ helm -n sdfabric ls
-      NAME            NAMESPACE       REVISION        UPDATED                                 STATUS          CHART           APP VERSION
-      sdfabric        sdfabric        1               2021-10-11 11:12:59.178789 -0700 PDT    deployed        sdfabric-1.0.1
+described on the `SD-Fabric Helm Chart README <https://gerrit.opencord.org/plugins/gitiles/sdfabric-helm-charts/+/HEAD/sdfabric/README.md>`_