diff --git a/xos/synchronizer/files/docker.list b/xos/synchronizer/files/docker.list
new file mode 100644
index 0000000..0ee9ae0
--- /dev/null
+++ b/xos/synchronizer/files/docker.list
@@ -0,0 +1 @@
+deb https://get.docker.com/ubuntu docker main
diff --git a/xos/synchronizer/files/etc/rc.local b/xos/synchronizer/files/etc/rc.local
new file mode 100755
index 0000000..2c7588f
--- /dev/null
+++ b/xos/synchronizer/files/etc/rc.local
@@ -0,0 +1,23 @@
+#!/bin/sh -e
+#
+# rc.local
+#
+# This script is executed at the end of each multiuser runlevel.
+# Make sure that the script will "exit 0" on success or any other
+# value on error.
+#
+# In order to enable or disable this script just change the execution
+# bits.
+#
+# By default this script does nothing.
+
+ufw enable
+ufw allow bootps
+ufw allow from 192.168.0.0/24
+ufw route allow in on eth1 out on eth0
+ufw route allow in on eth1 out on eth2
+
+BWLIMIT=/usr/local/sbin/bwlimit.sh
+[ -e $BWLIMIT ] && $BWLIMIT start || true
+
+exit 0
diff --git a/xos/synchronizer/files/etc/service/message/run b/xos/synchronizer/files/etc/service/message/run
new file mode 100755
index 0000000..7b587d8
--- /dev/null
+++ b/xos/synchronizer/files/etc/service/message/run
@@ -0,0 +1,19 @@
+#!/usr/bin/python
+
+import BaseHTTPServer
+
+
+class HTTPHandlerOne(BaseHTTPServer.BaseHTTPRequestHandler):
+    def do_GET(self):
+        with open('./message.html', 'r') as msgfile:
+            message = msgfile.read()
+        self.wfile.write(message)
+
+
+def run(server_class=BaseHTTPServer.HTTPServer,
+        handler_class=BaseHTTPServer.BaseHTTPRequestHandler):
+    server_address = ('192.168.0.1', 8000)
+    httpd = server_class(server_address, handler_class)
+    httpd.serve_forever()
+
+run(handler_class=HTTPHandlerOne)
diff --git a/xos/synchronizer/files/etc/ufw/after.init b/xos/synchronizer/files/etc/ufw/after.init
new file mode 100644
index 0000000..e89217d
--- /dev/null
+++ b/xos/synchronizer/files/etc/ufw/after.init
@@ -0,0 +1,40 @@
+#!/bin/sh
+#
+# after.init: if executable, called by ufw-init. See 'man ufw-framework' for
+#             details. Note that output from these scripts is not seen via the
+#             the ufw command, but instead via ufw-init.
+#
+# Copyright 2013 Canonical Ltd.
+#
+#    This program is free software: you can redistribute it and/or modify
+#    it under the terms of the GNU General Public License version 3,
+#    as published by the Free Software Foundation.
+#
+#    This program is distributed in the hope that it will be useful,
+#    but WITHOUT ANY WARRANTY; without even the implied warranty of
+#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#    GNU General Public License for more details.
+#
+#    You should have received a copy of the GNU General Public License
+#    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+set -e
+
+case "$1" in
+start)
+    # typically required
+    ;;
+stop)
+    # typically required
+    ;;
+status)
+    # optional
+    ;;
+flush-all)
+    # optional
+    ;;
+*)
+    echo "'$1' not supported"
+    echo "Usage: after.init {start|stop|flush-all|status}"
+    ;;
+esac
diff --git a/xos/synchronizer/files/etc/ufw/after.rules b/xos/synchronizer/files/etc/ufw/after.rules
new file mode 100644
index 0000000..0d6c646
--- /dev/null
+++ b/xos/synchronizer/files/etc/ufw/after.rules
@@ -0,0 +1,30 @@
+#
+# rules.input-after
+#
+# Rules that should be run after the ufw command line added rules. Custom
+# rules should be added to one of these chains:
+#   ufw-after-input
+#   ufw-after-output
+#   ufw-after-forward
+#
+
+# Don't delete these required lines, otherwise there will be errors
+*filter
+:ufw-after-input - [0:0]
+:ufw-after-output - [0:0]
+:ufw-after-forward - [0:0]
+# End required lines
+
+# don't log noisy services by default
+-A ufw-after-input -p udp --dport 137 -j ufw-skip-to-policy-input
+-A ufw-after-input -p udp --dport 138 -j ufw-skip-to-policy-input
+-A ufw-after-input -p tcp --dport 139 -j ufw-skip-to-policy-input
+-A ufw-after-input -p tcp --dport 445 -j ufw-skip-to-policy-input
+-A ufw-after-input -p udp --dport 67 -j ufw-skip-to-policy-input
+-A ufw-after-input -p udp --dport 68 -j ufw-skip-to-policy-input
+
+# don't log noisy broadcast
+-A ufw-after-input -m addrtype --dst-type BROADCAST -j ufw-skip-to-policy-input
+
+# don't delete the 'COMMIT' line or these rules won't be processed
+COMMIT
diff --git a/xos/synchronizer/files/etc/ufw/after6.rules b/xos/synchronizer/files/etc/ufw/after6.rules
new file mode 100644
index 0000000..0d99672
--- /dev/null
+++ b/xos/synchronizer/files/etc/ufw/after6.rules
@@ -0,0 +1,27 @@
+#
+# rules.input-after
+#
+# Rules that should be run after the ufw command line added rules. Custom
+# rules should be added to one of these chains:
+#   ufw6-after-input
+#   ufw6-after-output
+#   ufw6-after-forward
+#
+
+# Don't delete these required lines, otherwise there will be errors
+*filter
+:ufw6-after-input - [0:0]
+:ufw6-after-output - [0:0]
+:ufw6-after-forward - [0:0]
+# End required lines
+
+# don't log noisy services by default
+-A ufw6-after-input -p udp --dport 137 -j ufw6-skip-to-policy-input
+-A ufw6-after-input -p udp --dport 138 -j ufw6-skip-to-policy-input
+-A ufw6-after-input -p tcp --dport 139 -j ufw6-skip-to-policy-input
+-A ufw6-after-input -p tcp --dport 445 -j ufw6-skip-to-policy-input
+-A ufw6-after-input -p udp --dport 546 -j ufw6-skip-to-policy-input
+-A ufw6-after-input -p udp --dport 547 -j ufw6-skip-to-policy-input
+
+# don't delete the 'COMMIT' line or these rules won't be processed
+COMMIT
diff --git a/xos/synchronizer/files/etc/ufw/applications.d/openssh-server b/xos/synchronizer/files/etc/ufw/applications.d/openssh-server
new file mode 100644
index 0000000..9bbe906
--- /dev/null
+++ b/xos/synchronizer/files/etc/ufw/applications.d/openssh-server
@@ -0,0 +1,4 @@
+[OpenSSH]
+title=Secure shell server, an rshd replacement
+description=OpenSSH is a free implementation of the Secure Shell protocol.
+ports=22/tcp
diff --git a/xos/synchronizer/files/etc/ufw/before.init b/xos/synchronizer/files/etc/ufw/before.init
new file mode 100644
index 0000000..1348cb1
--- /dev/null
+++ b/xos/synchronizer/files/etc/ufw/before.init
@@ -0,0 +1,40 @@
+#!/bin/sh
+#
+# before.init: if executable, called by ufw-init. See 'man ufw-framework' for
+#              details. Note that output from these scripts is not seen via the
+#              the ufw command, but instead via ufw-init.
+#
+# Copyright 2013 Canonical Ltd.
+#
+#    This program is free software: you can redistribute it and/or modify
+#    it under the terms of the GNU General Public License version 3,
+#    as published by the Free Software Foundation.
+#
+#    This program is distributed in the hope that it will be useful,
+#    but WITHOUT ANY WARRANTY; without even the implied warranty of
+#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#    GNU General Public License for more details.
+#
+#    You should have received a copy of the GNU General Public License
+#    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+set -e
+
+case "$1" in
+start)
+    # typically required
+    ;;
+stop)
+    # typically required
+    ;;
+status)
+    # optional
+    ;;
+flush-all)
+    # optional
+    ;;
+*)
+    echo "'$1' not supported"
+    echo "Usage: before.init {start|stop|flush-all|status}"
+    ;;
+esac
diff --git a/xos/synchronizer/files/etc/ufw/before6.rules b/xos/synchronizer/files/etc/ufw/before6.rules
new file mode 100644
index 0000000..0b26ed8
--- /dev/null
+++ b/xos/synchronizer/files/etc/ufw/before6.rules
@@ -0,0 +1,73 @@
+#
+# rules.before
+#
+# Rules that should be run before the ufw command line added rules. Custom
+# rules should be added to one of these chains:
+#   ufw6-before-input
+#   ufw6-before-output
+#   ufw6-before-forward
+#
+
+# Don't delete these required lines, otherwise there will be errors
+*filter
+:ufw6-before-input - [0:0]
+:ufw6-before-output - [0:0]
+:ufw6-before-forward - [0:0]
+# End required lines
+
+
+# allow all on loopback
+-A ufw6-before-input -i lo -j ACCEPT
+-A ufw6-before-output -o lo -j ACCEPT
+
+# drop packets with RH0 headers
+-A ufw6-before-input -m rt --rt-type 0 -j DROP
+-A ufw6-before-forward -m rt --rt-type 0 -j DROP
+-A ufw6-before-output -m rt --rt-type 0 -j DROP
+
+# for stateless autoconfiguration (restrict NDP messages to hop limit of 255)
+-A ufw6-before-input -p icmpv6 --icmpv6-type neighbor-solicitation -m hl --hl-eq 255 -j ACCEPT
+-A ufw6-before-output -p icmpv6 --icmpv6-type neighbor-solicitation -m hl --hl-eq 255 -j ACCEPT
+-A ufw6-before-input -p icmpv6 --icmpv6-type neighbor-advertisement -m hl --hl-eq 255 -j ACCEPT
+-A ufw6-before-output -p icmpv6 --icmpv6-type neighbor-advertisement -m hl --hl-eq 255 -j ACCEPT
+-A ufw6-before-input -p icmpv6 --icmpv6-type router-solicitation -m hl --hl-eq 255 -j ACCEPT
+-A ufw6-before-input -p icmpv6 --icmpv6-type router-advertisement -m hl --hl-eq 255 -j ACCEPT
+
+# quickly process packets for which we already have a connection
+-A ufw6-before-input -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
+-A ufw6-before-output -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
+-A ufw6-before-forward -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
+
+# for multicast ping replies from link-local addresses (these don't have an
+# associated connection and would otherwise be marked INVALID)
+-A ufw6-before-input -p icmpv6 --icmpv6-type echo-reply -s fe80::/10 -j ACCEPT
+
+# drop INVALID packets (logs these in loglevel medium and higher)
+-A ufw6-before-input -m conntrack --ctstate INVALID -j ufw6-logging-deny
+-A ufw6-before-input -m conntrack --ctstate INVALID -j DROP
+
+# ok icmp codes for INPUT
+-A ufw6-before-input -p icmpv6 --icmpv6-type destination-unreachable -j ACCEPT
+-A ufw6-before-input -p icmpv6 --icmpv6-type packet-too-big -j ACCEPT
+-A ufw6-before-input -p icmpv6 --icmpv6-type time-exceeded -j ACCEPT
+-A ufw6-before-input -p icmpv6 --icmpv6-type parameter-problem -j ACCEPT
+-A ufw6-before-input -p icmpv6 --icmpv6-type echo-request -j ACCEPT
+
+# ok icmp code for FORWARD
+-A ufw6-before-forward -p icmpv6 --icmpv6-type destination-unreachable -j ACCEPT
+-A ufw6-before-forward -p icmpv6 --icmpv6-type packet-too-big -j ACCEPT
+-A ufw6-before-forward -p icmpv6 --icmpv6-type time-exceeded -j ACCEPT
+-A ufw6-before-forward -p icmpv6 --icmpv6-type parameter-problem -j ACCEPT
+-A ufw6-before-forward -p icmpv6 --icmpv6-type echo-request -j ACCEPT
+
+# allow dhcp client to work
+-A ufw6-before-input -p udp -s fe80::/10 --sport 547 -d fe80::/10 --dport 546 -j ACCEPT
+
+# allow MULTICAST mDNS for service discovery
+-A ufw6-before-input -p udp -d ff02::fb --dport 5353 -j ACCEPT
+
+# allow MULTICAST UPnP for service discovery
+-A ufw6-before-input -p udp -d ff02::f --dport 1900 -j ACCEPT
+
+# don't delete the 'COMMIT' line or these rules won't be processed
+COMMIT
diff --git a/xos/synchronizer/files/etc/ufw/sysctl.conf b/xos/synchronizer/files/etc/ufw/sysctl.conf
new file mode 100644
index 0000000..8707032
--- /dev/null
+++ b/xos/synchronizer/files/etc/ufw/sysctl.conf
@@ -0,0 +1,57 @@
+#
+# Configuration file for setting network variables. Please note these settings
+# override /etc/sysctl.conf. If you prefer to use /etc/sysctl.conf, please
+# adjust IPT_SYSCTL in /etc/default/ufw.
+#
+
+# Uncomment this to allow this host to route packets between interfaces
+#net/ipv4/ip_forward=1
+#net/ipv6/conf/default/forwarding=1
+#net/ipv6/conf/all/forwarding=1
+
+# Turn on Source Address Verification in all interfaces to prevent some
+# spoofing attacks
+net/ipv4/conf/default/rp_filter=1
+net/ipv4/conf/all/rp_filter=1
+
+# Do not accept IP source route packets (we are not a router)
+net/ipv4/conf/default/accept_source_route=0
+net/ipv4/conf/all/accept_source_route=0
+net/ipv6/conf/default/accept_source_route=0
+net/ipv6/conf/all/accept_source_route=0
+
+# Disable ICMP redirects. ICMP redirects are rarely used but can be used in
+# MITM (man-in-the-middle) attacks. Disabling ICMP may disrupt legitimate
+# traffic to those sites.
+net/ipv4/conf/default/accept_redirects=0
+net/ipv4/conf/all/accept_redirects=0
+net/ipv6/conf/default/accept_redirects=0
+net/ipv6/conf/all/accept_redirects=0
+
+# Ignore bogus ICMP errors
+net/ipv4/icmp_echo_ignore_broadcasts=1
+net/ipv4/icmp_ignore_bogus_error_responses=1
+net/ipv4/icmp_echo_ignore_all=0
+
+# Don't log Martian Packets (impossible packets)
+net/ipv4/conf/default/log_martians=0
+net/ipv4/conf/all/log_martians=0
+
+# Change to '1' to enable TCP/IP SYN cookies This disables TCP Window Scaling
+# (http://lkml.org/lkml/2008/2/5/167)
+net/ipv4/tcp_syncookies=0
+
+#net/ipv4/tcp_fin_timeout=30
+#net/ipv4/tcp_keepalive_intvl=1800
+
+# normally allowing tcp_sack is ok, but if going through OpenBSD 3.8 RELEASE or
+# earlier pf firewall, should set this to 0
+net/ipv4/tcp_sack=1
+
+# Uncomment this to turn off ipv6 autoconfiguration
+#net/ipv6/conf/default/autoconf=0
+#net/ipv6/conf/all/autoconf=0
+
+# Uncomment this to enable ipv6 privacy addressing
+#net/ipv6/conf/default/use_tempaddr=2
+#net/ipv6/conf/all/use_tempaddr=2
diff --git a/xos/synchronizer/files/etc/ufw/ufw.conf b/xos/synchronizer/files/etc/ufw/ufw.conf
new file mode 100644
index 0000000..28fe534
--- /dev/null
+++ b/xos/synchronizer/files/etc/ufw/ufw.conf
@@ -0,0 +1,10 @@
+# /etc/ufw/ufw.conf
+#
+
+# Set to yes to start on boot. If setting this remotely, be sure to add a rule
+# to allow your remote connection before starting ufw. Eg: 'ufw allow 22/tcp'
+ENABLED=yes
+
+# Please use the 'ufw' command to set the loglevel. Eg: 'ufw logging medium'.
+# See 'man ufw' for details.
+LOGLEVEL=low
diff --git a/xos/synchronizer/files/veg.conf b/xos/synchronizer/files/veg.conf
new file mode 100644
index 0000000..7372d19
--- /dev/null
+++ b/xos/synchronizer/files/veg.conf
@@ -0,0 +1,10 @@
+# Upstart script for vEG
+description "vEG container"
+author "andy@onlab.us"
+start on filesystem and started docker
+stop on runlevel [!2345]
+respawn
+
+script
+  /usr/local/sbin/start-veg.sh
+end script
diff --git a/xos/synchronizer/files/veg.dnsmasq b/xos/synchronizer/files/veg.dnsmasq
new file mode 100644
index 0000000..2b2687b
--- /dev/null
+++ b/xos/synchronizer/files/veg.dnsmasq
@@ -0,0 +1,2 @@
+listen-address=192.168.0.1
+dhcp-range=192.168.0.2,192.168.0.254,6
diff --git a/xos/synchronizer/files/vm-resolv.conf b/xos/synchronizer/files/vm-resolv.conf
new file mode 100644
index 0000000..cae093a
--- /dev/null
+++ b/xos/synchronizer/files/vm-resolv.conf
@@ -0,0 +1 @@
+nameserver 8.8.8.8