diff --git a/vendor/github.com/klauspost/compress/zstd/seqdec.go b/vendor/github.com/klauspost/compress/zstd/seqdec.go
index 15a45f7..1dd39e6 100644
--- a/vendor/github.com/klauspost/compress/zstd/seqdec.go
+++ b/vendor/github.com/klauspost/compress/zstd/seqdec.go
@@ -62,8 +62,10 @@
 	matchLengths sequenceDec
 	prevOffset   [3]int
 	hist         []byte
+	dict         []byte
 	literals     []byte
 	out          []byte
+	windowSize   int
 	maxBits      uint8
 }
 
@@ -82,7 +84,12 @@
 	s.hist = hist.b
 	s.prevOffset = hist.recentOffsets
 	s.maxBits = s.litLengths.fse.maxBits + s.offsets.fse.maxBits + s.matchLengths.fse.maxBits
+	s.windowSize = hist.windowSize
 	s.out = out
+	s.dict = nil
+	if hist.dict != nil {
+		s.dict = hist.dict.content
+	}
 	return nil
 }
 
@@ -98,76 +105,159 @@
 			printf("reading sequence %d, exceeded available data\n", seqs-i)
 			return io.ErrUnexpectedEOF
 		}
-		var litLen, matchOff, matchLen int
+		var ll, mo, ml int
 		if br.off > 4+((maxOffsetBits+16+16)>>3) {
-			litLen, matchOff, matchLen = s.nextFast(br, llState, mlState, ofState)
+			// inlined function:
+			// ll, mo, ml = s.nextFast(br, llState, mlState, ofState)
+
+			// Final will not read from stream.
+			var llB, mlB, moB uint8
+			ll, llB = llState.final()
+			ml, mlB = mlState.final()
+			mo, moB = ofState.final()
+
+			// extra bits are stored in reverse order.
+			br.fillFast()
+			mo += br.getBits(moB)
+			if s.maxBits > 32 {
+				br.fillFast()
+			}
+			ml += br.getBits(mlB)
+			ll += br.getBits(llB)
+
+			if moB > 1 {
+				s.prevOffset[2] = s.prevOffset[1]
+				s.prevOffset[1] = s.prevOffset[0]
+				s.prevOffset[0] = mo
+			} else {
+				// mo = s.adjustOffset(mo, ll, moB)
+				// Inlined for rather big speedup
+				if ll == 0 {
+					// There is an exception though, when current sequence's literals_length = 0.
+					// In this case, repeated offsets are shifted by one, so an offset_value of 1 means Repeated_Offset2,
+					// an offset_value of 2 means Repeated_Offset3, and an offset_value of 3 means Repeated_Offset1 - 1_byte.
+					mo++
+				}
+
+				if mo == 0 {
+					mo = s.prevOffset[0]
+				} else {
+					var temp int
+					if mo == 3 {
+						temp = s.prevOffset[0] - 1
+					} else {
+						temp = s.prevOffset[mo]
+					}
+
+					if temp == 0 {
+						// 0 is not valid; input is corrupted; force offset to 1
+						println("temp was 0")
+						temp = 1
+					}
+
+					if mo != 1 {
+						s.prevOffset[2] = s.prevOffset[1]
+					}
+					s.prevOffset[1] = s.prevOffset[0]
+					s.prevOffset[0] = temp
+					mo = temp
+				}
+			}
 			br.fillFast()
 		} else {
-			litLen, matchOff, matchLen = s.next(br, llState, mlState, ofState)
+			ll, mo, ml = s.next(br, llState, mlState, ofState)
 			br.fill()
 		}
 
 		if debugSequences {
-			println("Seq", seqs-i-1, "Litlen:", litLen, "matchOff:", matchOff, "(abs) matchLen:", matchLen)
+			println("Seq", seqs-i-1, "Litlen:", ll, "mo:", mo, "(abs) ml:", ml)
 		}
 
-		if litLen > len(s.literals) {
-			return fmt.Errorf("unexpected literal count, want %d bytes, but only %d is available", litLen, len(s.literals))
+		if ll > len(s.literals) {
+			return fmt.Errorf("unexpected literal count, want %d bytes, but only %d is available", ll, len(s.literals))
 		}
-		size := litLen + matchLen + len(s.out)
+		size := ll + ml + len(s.out)
 		if size-startSize > maxBlockSize {
 			return fmt.Errorf("output (%d) bigger than max block size", size)
 		}
 		if size > cap(s.out) {
-			// Not enough size, will be extremely rarely triggered,
+			// Not enough size, which can happen under high volume block streaming conditions
 			// but could be if destination slice is too small for sync operations.
-			// We add maxBlockSize to the capacity.
-			s.out = append(s.out, make([]byte, maxBlockSize)...)
-			s.out = s.out[:len(s.out)-maxBlockSize]
+			// over-allocating here can create a large amount of GC pressure so we try to keep
+			// it as contained as possible
+			used := len(s.out) - startSize
+			addBytes := 256 + ll + ml + used>>2
+			// Clamp to max block size.
+			if used+addBytes > maxBlockSize {
+				addBytes = maxBlockSize - used
+			}
+			s.out = append(s.out, make([]byte, addBytes)...)
+			s.out = s.out[:len(s.out)-addBytes]
 		}
-		if matchLen > maxMatchLen {
-			return fmt.Errorf("match len (%d) bigger than max allowed length", matchLen)
-		}
-		if matchOff > len(s.out)+len(hist)+litLen {
-			return fmt.Errorf("match offset (%d) bigger than current history (%d)", matchOff, len(s.out)+len(hist)+litLen)
-		}
-		if matchOff == 0 && matchLen > 0 {
-			return fmt.Errorf("zero matchoff and matchlen > 0")
+		if ml > maxMatchLen {
+			return fmt.Errorf("match len (%d) bigger than max allowed length", ml)
 		}
 
-		s.out = append(s.out, s.literals[:litLen]...)
-		s.literals = s.literals[litLen:]
+		// Add literals
+		s.out = append(s.out, s.literals[:ll]...)
+		s.literals = s.literals[ll:]
 		out := s.out
 
+		if mo == 0 && ml > 0 {
+			return fmt.Errorf("zero matchoff and matchlen (%d) > 0", ml)
+		}
+
+		if mo > len(s.out)+len(hist) || mo > s.windowSize {
+			if len(s.dict) == 0 {
+				return fmt.Errorf("match offset (%d) bigger than current history (%d)", mo, len(s.out)+len(hist))
+			}
+
+			// we may be in dictionary.
+			dictO := len(s.dict) - (mo - (len(s.out) + len(hist)))
+			if dictO < 0 || dictO >= len(s.dict) {
+				return fmt.Errorf("match offset (%d) bigger than current history (%d)", mo, len(s.out)+len(hist))
+			}
+			end := dictO + ml
+			if end > len(s.dict) {
+				out = append(out, s.dict[dictO:]...)
+				mo -= len(s.dict) - dictO
+				ml -= len(s.dict) - dictO
+			} else {
+				out = append(out, s.dict[dictO:end]...)
+				mo = 0
+				ml = 0
+			}
+		}
+
 		// Copy from history.
 		// TODO: Blocks without history could be made to ignore this completely.
-		if v := matchOff - len(s.out); v > 0 {
+		if v := mo - len(s.out); v > 0 {
 			// v is the start position in history from end.
 			start := len(s.hist) - v
-			if matchLen > v {
+			if ml > v {
 				// Some goes into current block.
 				// Copy remainder of history
 				out = append(out, s.hist[start:]...)
-				matchOff -= v
-				matchLen -= v
+				mo -= v
+				ml -= v
 			} else {
-				out = append(out, s.hist[start:start+matchLen]...)
-				matchLen = 0
+				out = append(out, s.hist[start:start+ml]...)
+				ml = 0
 			}
 		}
 		// We must be in current buffer now
-		if matchLen > 0 {
-			start := len(s.out) - matchOff
-			if matchLen <= len(s.out)-start {
+		if ml > 0 {
+			start := len(s.out) - mo
+			if ml <= len(s.out)-start {
 				// No overlap
-				out = append(out, s.out[start:start+matchLen]...)
+				out = append(out, s.out[start:start+ml]...)
 			} else {
 				// Overlapping copy
 				// Extend destination slice and copy one byte at the time.
-				out = out[:len(out)+matchLen]
-				src := out[start : start+matchLen]
+				out = out[:len(out)+ml]
+				src := out[start : start+ml]
 				// Destination is the space we just added.
-				dst := out[len(out)-matchLen:]
+				dst := out[len(out)-ml:]
 				dst = dst[:len(src)]
 				for i := range src {
 					dst[i] = src[i]