diff --git a/vendor/golang.org/x/time/AUTHORS b/vendor/golang.org/x/time/AUTHORS
deleted file mode 100644
index 15167cd..0000000
--- a/vendor/golang.org/x/time/AUTHORS
+++ /dev/null
@@ -1,3 +0,0 @@
-# This source code refers to The Go Authors for copyright purposes.
-# The master list of authors is in the main Go distribution,
-# visible at http://tip.golang.org/AUTHORS.
diff --git a/vendor/golang.org/x/time/CONTRIBUTORS b/vendor/golang.org/x/time/CONTRIBUTORS
deleted file mode 100644
index 1c4577e..0000000
--- a/vendor/golang.org/x/time/CONTRIBUTORS
+++ /dev/null
@@ -1,3 +0,0 @@
-# This source code was written by the Go contributors.
-# The master list of contributors is in the main Go distribution,
-# visible at http://tip.golang.org/CONTRIBUTORS.
diff --git a/vendor/golang.org/x/time/rate/rate.go b/vendor/golang.org/x/time/rate/rate.go
index 0cfcc84..f0e0cf3 100644
--- a/vendor/golang.org/x/time/rate/rate.go
+++ b/vendor/golang.org/x/time/rate/rate.go
@@ -80,6 +80,19 @@
 	return lim.burst
 }
 
+// TokensAt returns the number of tokens available at time t.
+func (lim *Limiter) TokensAt(t time.Time) float64 {
+	lim.mu.Lock()
+	_, tokens := lim.advance(t) // does not mutate lim
+	lim.mu.Unlock()
+	return tokens
+}
+
+// Tokens returns the number of tokens available now.
+func (lim *Limiter) Tokens() float64 {
+	return lim.TokensAt(time.Now())
+}
+
 // NewLimiter returns a new Limiter that allows events up to rate r and permits
 // bursts of at most b tokens.
 func NewLimiter(r Limit, b int) *Limiter {
@@ -89,16 +102,16 @@
 	}
 }
 
-// Allow is shorthand for AllowN(time.Now(), 1).
+// Allow reports whether an event may happen now.
 func (lim *Limiter) Allow() bool {
 	return lim.AllowN(time.Now(), 1)
 }
 
-// AllowN reports whether n events may happen at time now.
+// AllowN reports whether n events may happen at time t.
 // Use this method if you intend to drop / skip events that exceed the rate limit.
 // Otherwise use Reserve or Wait.
-func (lim *Limiter) AllowN(now time.Time, n int) bool {
-	return lim.reserveN(now, n, 0).ok
+func (lim *Limiter) AllowN(t time.Time, n int) bool {
+	return lim.reserveN(t, n, 0).ok
 }
 
 // A Reservation holds information about events that are permitted by a Limiter to happen after a delay.
@@ -125,17 +138,17 @@
 }
 
 // InfDuration is the duration returned by Delay when a Reservation is not OK.
-const InfDuration = time.Duration(1<<63 - 1)
+const InfDuration = time.Duration(math.MaxInt64)
 
 // DelayFrom returns the duration for which the reservation holder must wait
 // before taking the reserved action.  Zero duration means act immediately.
 // InfDuration means the limiter cannot grant the tokens requested in this
 // Reservation within the maximum wait time.
-func (r *Reservation) DelayFrom(now time.Time) time.Duration {
+func (r *Reservation) DelayFrom(t time.Time) time.Duration {
 	if !r.ok {
 		return InfDuration
 	}
-	delay := r.timeToAct.Sub(now)
+	delay := r.timeToAct.Sub(t)
 	if delay < 0 {
 		return 0
 	}
@@ -150,7 +163,7 @@
 // CancelAt indicates that the reservation holder will not perform the reserved action
 // and reverses the effects of this Reservation on the rate limit as much as possible,
 // considering that other reservations may have already been made.
-func (r *Reservation) CancelAt(now time.Time) {
+func (r *Reservation) CancelAt(t time.Time) {
 	if !r.ok {
 		return
 	}
@@ -158,7 +171,7 @@
 	r.lim.mu.Lock()
 	defer r.lim.mu.Unlock()
 
-	if r.lim.limit == Inf || r.tokens == 0 || r.timeToAct.Before(now) {
+	if r.lim.limit == Inf || r.tokens == 0 || r.timeToAct.Before(t) {
 		return
 	}
 
@@ -170,18 +183,18 @@
 		return
 	}
 	// advance time to now
-	now, _, tokens := r.lim.advance(now)
+	t, tokens := r.lim.advance(t)
 	// calculate new number of tokens
 	tokens += restoreTokens
 	if burst := float64(r.lim.burst); tokens > burst {
 		tokens = burst
 	}
 	// update state
-	r.lim.last = now
+	r.lim.last = t
 	r.lim.tokens = tokens
 	if r.timeToAct == r.lim.lastEvent {
 		prevEvent := r.timeToAct.Add(r.limit.durationFromTokens(float64(-r.tokens)))
-		if !prevEvent.Before(now) {
+		if !prevEvent.Before(t) {
 			r.lim.lastEvent = prevEvent
 		}
 	}
@@ -196,18 +209,20 @@
 // The Limiter takes this Reservation into account when allowing future events.
 // The returned Reservation’s OK() method returns false if n exceeds the Limiter's burst size.
 // Usage example:
-//   r := lim.ReserveN(time.Now(), 1)
-//   if !r.OK() {
-//     // Not allowed to act! Did you remember to set lim.burst to be > 0 ?
-//     return
-//   }
-//   time.Sleep(r.Delay())
-//   Act()
+//
+//	r := lim.ReserveN(time.Now(), 1)
+//	if !r.OK() {
+//	  // Not allowed to act! Did you remember to set lim.burst to be > 0 ?
+//	  return
+//	}
+//	time.Sleep(r.Delay())
+//	Act()
+//
 // Use this method if you wish to wait and slow down in accordance with the rate limit without dropping events.
 // If you need to respect a deadline or cancel the delay, use Wait instead.
 // To drop or skip events exceeding rate limit, use Allow instead.
-func (lim *Limiter) ReserveN(now time.Time, n int) *Reservation {
-	r := lim.reserveN(now, n, InfDuration)
+func (lim *Limiter) ReserveN(t time.Time, n int) *Reservation {
+	r := lim.reserveN(t, n, InfDuration)
 	return &r
 }
 
@@ -221,6 +236,18 @@
 // canceled, or the expected wait time exceeds the Context's Deadline.
 // The burst limit is ignored if the rate limit is Inf.
 func (lim *Limiter) WaitN(ctx context.Context, n int) (err error) {
+	// The test code calls lim.wait with a fake timer generator.
+	// This is the real timer generator.
+	newTimer := func(d time.Duration) (<-chan time.Time, func() bool, func()) {
+		timer := time.NewTimer(d)
+		return timer.C, timer.Stop, func() {}
+	}
+
+	return lim.wait(ctx, n, time.Now(), newTimer)
+}
+
+// wait is the internal implementation of WaitN.
+func (lim *Limiter) wait(ctx context.Context, n int, t time.Time, newTimer func(d time.Duration) (<-chan time.Time, func() bool, func())) error {
 	lim.mu.Lock()
 	burst := lim.burst
 	limit := lim.limit
@@ -236,25 +263,25 @@
 	default:
 	}
 	// Determine wait limit
-	now := time.Now()
 	waitLimit := InfDuration
 	if deadline, ok := ctx.Deadline(); ok {
-		waitLimit = deadline.Sub(now)
+		waitLimit = deadline.Sub(t)
 	}
 	// Reserve
-	r := lim.reserveN(now, n, waitLimit)
+	r := lim.reserveN(t, n, waitLimit)
 	if !r.ok {
 		return fmt.Errorf("rate: Wait(n=%d) would exceed context deadline", n)
 	}
 	// Wait if necessary
-	delay := r.DelayFrom(now)
+	delay := r.DelayFrom(t)
 	if delay == 0 {
 		return nil
 	}
-	t := time.NewTimer(delay)
-	defer t.Stop()
+	ch, stop, advance := newTimer(delay)
+	defer stop()
+	advance() // only has an effect when testing
 	select {
-	case <-t.C:
+	case <-ch:
 		// We can proceed.
 		return nil
 	case <-ctx.Done():
@@ -273,13 +300,13 @@
 // SetLimitAt sets a new Limit for the limiter. The new Limit, and Burst, may be violated
 // or underutilized by those which reserved (using Reserve or Wait) but did not yet act
 // before SetLimitAt was called.
-func (lim *Limiter) SetLimitAt(now time.Time, newLimit Limit) {
+func (lim *Limiter) SetLimitAt(t time.Time, newLimit Limit) {
 	lim.mu.Lock()
 	defer lim.mu.Unlock()
 
-	now, _, tokens := lim.advance(now)
+	t, tokens := lim.advance(t)
 
-	lim.last = now
+	lim.last = t
 	lim.tokens = tokens
 	lim.limit = newLimit
 }
@@ -290,13 +317,13 @@
 }
 
 // SetBurstAt sets a new burst size for the limiter.
-func (lim *Limiter) SetBurstAt(now time.Time, newBurst int) {
+func (lim *Limiter) SetBurstAt(t time.Time, newBurst int) {
 	lim.mu.Lock()
 	defer lim.mu.Unlock()
 
-	now, _, tokens := lim.advance(now)
+	t, tokens := lim.advance(t)
 
-	lim.last = now
+	lim.last = t
 	lim.tokens = tokens
 	lim.burst = newBurst
 }
@@ -304,20 +331,32 @@
 // reserveN is a helper method for AllowN, ReserveN, and WaitN.
 // maxFutureReserve specifies the maximum reservation wait duration allowed.
 // reserveN returns Reservation, not *Reservation, to avoid allocation in AllowN and WaitN.
-func (lim *Limiter) reserveN(now time.Time, n int, maxFutureReserve time.Duration) Reservation {
+func (lim *Limiter) reserveN(t time.Time, n int, maxFutureReserve time.Duration) Reservation {
 	lim.mu.Lock()
+	defer lim.mu.Unlock()
 
 	if lim.limit == Inf {
-		lim.mu.Unlock()
 		return Reservation{
 			ok:        true,
 			lim:       lim,
 			tokens:    n,
-			timeToAct: now,
+			timeToAct: t,
+		}
+	} else if lim.limit == 0 {
+		var ok bool
+		if lim.burst >= n {
+			ok = true
+			lim.burst -= n
+		}
+		return Reservation{
+			ok:        ok,
+			lim:       lim,
+			tokens:    lim.burst,
+			timeToAct: t,
 		}
 	}
 
-	now, last, tokens := lim.advance(now)
+	t, tokens := lim.advance(t)
 
 	// Calculate the remaining number of tokens resulting from the request.
 	tokens -= float64(n)
@@ -339,44 +378,42 @@
 	}
 	if ok {
 		r.tokens = n
-		r.timeToAct = now.Add(waitDuration)
-	}
+		r.timeToAct = t.Add(waitDuration)
 
-	// Update state
-	if ok {
-		lim.last = now
+		// Update state
+		lim.last = t
 		lim.tokens = tokens
 		lim.lastEvent = r.timeToAct
-	} else {
-		lim.last = last
 	}
 
-	lim.mu.Unlock()
 	return r
 }
 
 // advance calculates and returns an updated state for lim resulting from the passage of time.
 // lim is not changed.
 // advance requires that lim.mu is held.
-func (lim *Limiter) advance(now time.Time) (newNow time.Time, newLast time.Time, newTokens float64) {
+func (lim *Limiter) advance(t time.Time) (newT time.Time, newTokens float64) {
 	last := lim.last
-	if now.Before(last) {
-		last = now
+	if t.Before(last) {
+		last = t
 	}
 
 	// Calculate the new number of tokens, due to time that passed.
-	elapsed := now.Sub(last)
+	elapsed := t.Sub(last)
 	delta := lim.limit.tokensFromDuration(elapsed)
 	tokens := lim.tokens + delta
 	if burst := float64(lim.burst); tokens > burst {
 		tokens = burst
 	}
-	return now, last, tokens
+	return t, tokens
 }
 
 // durationFromTokens is a unit conversion function from the number of tokens to the duration
 // of time it takes to accumulate them at a rate of limit tokens per second.
 func (limit Limit) durationFromTokens(tokens float64) time.Duration {
+	if limit <= 0 {
+		return InfDuration
+	}
 	seconds := tokens / float64(limit)
 	return time.Duration(float64(time.Second) * seconds)
 }
@@ -384,5 +421,8 @@
 // tokensFromDuration is a unit conversion function from a time duration to the number of tokens
 // which could be accumulated during that duration at a rate of limit tokens per second.
 func (limit Limit) tokensFromDuration(d time.Duration) float64 {
+	if limit <= 0 {
+		return 0
+	}
 	return d.Seconds() * float64(limit)
 }
diff --git a/vendor/golang.org/x/time/rate/sometimes.go b/vendor/golang.org/x/time/rate/sometimes.go
new file mode 100644
index 0000000..6ba99dd
--- /dev/null
+++ b/vendor/golang.org/x/time/rate/sometimes.go
@@ -0,0 +1,67 @@
+// Copyright 2022 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package rate
+
+import (
+	"sync"
+	"time"
+)
+
+// Sometimes will perform an action occasionally.  The First, Every, and
+// Interval fields govern the behavior of Do, which performs the action.
+// A zero Sometimes value will perform an action exactly once.
+//
+// # Example: logging with rate limiting
+//
+//	var sometimes = rate.Sometimes{First: 3, Interval: 10*time.Second}
+//	func Spammy() {
+//	        sometimes.Do(func() { log.Info("here I am!") })
+//	}
+type Sometimes struct {
+	First    int           // if non-zero, the first N calls to Do will run f.
+	Every    int           // if non-zero, every Nth call to Do will run f.
+	Interval time.Duration // if non-zero and Interval has elapsed since f's last run, Do will run f.
+
+	mu    sync.Mutex
+	count int       // number of Do calls
+	last  time.Time // last time f was run
+}
+
+// Do runs the function f as allowed by First, Every, and Interval.
+//
+// The model is a union (not intersection) of filters.  The first call to Do
+// always runs f.  Subsequent calls to Do run f if allowed by First or Every or
+// Interval.
+//
+// A non-zero First:N causes the first N Do(f) calls to run f.
+//
+// A non-zero Every:M causes every Mth Do(f) call, starting with the first, to
+// run f.
+//
+// A non-zero Interval causes Do(f) to run f if Interval has elapsed since
+// Do last ran f.
+//
+// Specifying multiple filters produces the union of these execution streams.
+// For example, specifying both First:N and Every:M causes the first N Do(f)
+// calls and every Mth Do(f) call, starting with the first, to run f.  See
+// Examples for more.
+//
+// If Do is called multiple times simultaneously, the calls will block and run
+// serially.  Therefore, Do is intended for lightweight operations.
+//
+// Because a call to Do may block until f returns, if f causes Do to be called,
+// it will deadlock.
+func (s *Sometimes) Do(f func()) {
+	s.mu.Lock()
+	defer s.mu.Unlock()
+	if s.count == 0 ||
+		(s.First > 0 && s.count < s.First) ||
+		(s.Every > 0 && s.count%s.Every == 0) ||
+		(s.Interval > 0 && time.Since(s.last) >= s.Interval) {
+		f()
+		s.last = time.Now()
+	}
+	s.count++
+}